Continuous Service Date on Service Dates Tab

Hi there ,
Can some one help me to get the "Continous Service Date" from Service Dates Tab on the Person Screen using a DATA BASE ITEM.
we are using this in our payroll calculation but unable to find the correct DB to get this value.
Thanks,
Raghu.

Please see if (What form field does database item ACP_CONTINUOUS_SERVICE_DATE and ACP_SERVICE_START_DATE refer? [ID 734369.1]) helps.
Thanks,
Hussein

Similar Messages

Data from the History tab in Service Manager

Hello,
I would like to use data from the History tab in Incidents in a report. I do not see the data anywhere in the DWDataMart. If it does not exist there is there a management pack that can create tables and views for this data in the DWDataMart?
Thank you!

Hi,
Here is the good article that may be able to help you:
http://www.concurrency.com/blog/service-manager-useful-queries-entity-change-log/
Remy BOVI

No organization data for service products

Hi,
I create a CRM service order with a service product. Now there is a message, that the product in sales organization and distribution channel is not scheduled.
Our service products in general don't have organization data, cause they occur from r/3 service master data (transaction ac03).
How to assign org.data to service products in CRM? I cannot assign the set type for org.data to the category of service products cause we download the products with the middleware from R/3.
Regards
Jochen

Hi
Sercie products will be created in CRM in service product type, while creating a service product you have to assign the Organizational data in sales and distribution tab
Thanks
Satheesh

Auto change Posting date to current date in Service Entry on approval day

Hi Guru
The scenario is:
User is creating a Service Entry (SE) ML81n
The Posting date X is taken automatically as today's / sys date in SE
The SE goes for approval in Approver's inbox.
Approver is taken to SE when presses approval button on X+1 date i.e. the next day.
In SE the posting date is still the same as X
Posting Date automatically change to X+1 in SE.
(I found that this issue does not have link to workflow, i ts only in ML81n we need to look in. or there may be other opinion)
Pl help in understanding to get this change automatically done.
Best Regards

There are two date fields in the accept data tab.
1> Document date: The date at which the service entry sheet was created
2> Posting date: When the entry sheet is created but not approved then
document date and posting date are the same.The document date is updated only when the entry sheet is approved.
If there are multiple levels of approval, the posting date will reflect the date last approval and will be updated with the date of final approval when the sheet is finally approved.
Hope this has helped you !
Regards,
Aviator

Data Acces Service could not start

Hi everyone,
Completely accidentally, putting manually Agent Control Panel settings on the management server then we have restarted the Microsoft monitoring agent service.
After having realizing our mistake, we have removed all these settings(it should be empty in the management server), but then some problems occurred on the server and data access service does not start again. There are 2 management servers at the environment
and we are having the same problem on both servers.
For example, the following event is seen on the event viewer, i know the description is not normal.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.ConfigurationReaderException: Feature of type 'Microsoft.EnterpriseManagement.ServiceDataLayer.IDBVersionCheckFeature, Microsoft.EnterpriseManagement.DataAccessService.OperationsManager, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
cannot be added to the container. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DBVersionCheckFeatureImplementation.SwitchHSToOM12Mode()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DBVersionCheckFeatureImplementation.InitializeDBVersionChecker()
   at Microsoft.EnterpriseManagement.SingletonLifetimeManager`1.GetComponent[K]()
   at Microsoft.EnterpriseManagement.FeatureContainer.GetFeatureInternal[T](Type type, String featureName)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.ConfigurationReaderHelper.ReadFeatures(XPathNavigator navi, IContainer container)
   at Microsoft.EnterpriseManagement.ConfigurationReaderHelper.Process()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart(Object obj)
Also, when we control, at the registry   [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Server Management Groups] keys are dissapearing!
When we created the keys manually, data access service is starting and console is opening. But when we restart either Microsoft monitoring agent service or the server these keys are dissapearing again.
Any help!
Yavuz Eren Demir

Hi Yan,
I also continued to analyze at the lab environment. But, the following key cannot seem on the new established server:
(HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Agent Management Groups)
Are you sure that you have it? This key must not be seen on the management servers.
By deleteing this key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Agent Management Groups) and HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HealthService\Parameters\management Groups\ for group (was empty) copying
the keys out of the working management servers, I realized that problem is over.
Thanks
Yavuz Eren Demir

SLD Data Provider Service

Can I access SLD Data Provider service using NWA instead of using Visual Administrator? I looked into Configuration of NWA under Application and could not find screens similar to VA. I was successful in finding JDBC Resources.
Any help appreciated.

Hi,
I am not sure,but you can try out this option.
1.Go to http://hostname:http port/nwa page.
2.give administrator credentials to logon to the page.
3.at the left hand side,for System Landscape selection,
give Local system administration.
4.Then at the tabs at the top,Select deploy and change tab.
Under that,u will get a configuration wizard page.
Underconfiguration wizard,u will get a task name tab.
type sld there and enter.
You will get a list of Templates under it.
You eill get an option of,
Creating connections to sld and setting SLD autorizations...........
If you select that,you will have template configurator installed,where you can enter all details of SLD Data supplier.
This would help you.
Reward points if helpful.........

Set Profile in Control Data of Service Order as required

Hi gurus,
We need to set Dynamic Profile Field (FFPRF) in Service Order - Control Data Tab as mandatory.
As per usual procedure: SPRO - Plant Maintenance and Customer Service - Maintenance and Service processing - Maintenance and Service Orders --> Define Field Selection....We are not able to find field "Dynamic item Profile" in the list to set it as Required.
Any idea how to proceed?
Thanks!
VL

Hi Narasimhan,
Thanks for your quick response.
We already considered setting as default DIP per Service Order but this is would not work for us as we have for one Service Order multiple possible Dynamic Item Profiles.
Would be great if we could set it as a required data so order can not be saved without DIP filled in. Isn´t it possible to do it via standard?
In addition to that would be great if we could set as default the DIP per Company Code to which the Service Order is assigned to. (enhancement IWO10009?) but relation Company Code - DIP would need to be maintained in a Z table...
Thanks,
VL

Data Flow Service while starting BAM services. Please help.

Hi,
I successfully installed BAM without any error. But when I start BAM i.e. START>ALL PROGRAMS>ORACLE BAM>STRAT ORACLE BAM, I recieve an error which says,
System error 3 has occured.
The system cannot find the path specified.
Even when I try to manually start the Data Flow service it gives the same error. But the Sadcsvc.exe file is present in the path specified.
What could be the cause for this error? How can I handle this?
Can anyone kindly help me with this.
Thanks for help,
Vishal

Hi,
I am not able to continue further. Please can anyone suggest what should be done?
Thanks,
Vishal

System Center Data Access Service

I am having issues with a new management server in our environment. We are continually getting the following error -
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
We have a handful of other Management servers in our environment that do NOT have any issues. This management server lives in a Hyper-V environment as do all other management server with the exception of 1. The OperationsManager and Operations Manger DW
live on Hyper-V as well.
Just getting this management server installed has been a bare to say the least, using the GUI install would simply rollback due to the fact that setup could not get the DataReader/DataWriter account information, so we were forced to install via cmd line.
During setup while monitoring the install logs it attempted to start the SDK service which I will say is a Domain Account. Each of the 4 attempts resulted in he Data Access service is either not running or not yet initialized.
We have attempted the ServicesPipeTimeout registry fix and that didn't work.
I am looking for some guidance on where I should look as to a "root" issue, any help at this point is appreciated.

try the following
http://www.rickygao.com/the-investigation-idea-in-data-access-service-error-in-my-scom-2012/
http://social.technet.microsoft.com/Forums/windows/en-US/f2281934-513d-4b60-bb4b-34ae8a892ace/failed-to-open-the-console-and-system-center-data-access-service-wont-start-scom-2012?forum=operationsmanagergeneral
Regards, Ibrahim Hamdy

Need info on Standard Web services to pull Order data in CRM from external applications

Hi Gurus,
I have a requirement to pull Order data in CRM from external non-sap application using Web services. Are there any standard SAP provided web services to pull order data based on some input? If yes, can you provide me any kind of documentation related to this?
Appreciate your help on this.
Thanks
Lakshman

Hi Lakshman,
I have checked further.
Please review below link of the SAP Help documentation :
http://help.sap.com/saphelp_nw70/helpdata/en/47/3a989cbcef2f35e10000000a1553f6/content.htm?frameset=/en/46/97218e79f115eae10000000a114a6b/frameset.htm&current_toc=/en/d1/802cfc454211d189710000e8322d00/plain.htm&node_id=439&show_children=false
and also the link :
–http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=347DD31EB5AB4BC592BD8B29C0981A1B
Hoping that this will be helpful.
Best regards - Christophe

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Pricing date for Service Order and Service Confirmation

Hi,
I cretated a Service Confirmation as followup for Service Order.
Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
I need to check T&C field and Zone field. But, I am not seeing these fields also.
Can you please let me know, where can I find this fields. (In which assignment block).
Thanks,
Sandeep
Edited by: Sandeep Reddy on May 31, 2010 7:21 PM

Hi,
I think by PRICING DATE they mean BILLING DATE.
In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
This is one strategy you can use.
Regards
Surendra More

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

Should I use a data retrieval service or software to recover data ?

Please pardon the length of this post.
Here's the setup for our office:
Computer 1:
10.4.8 OS X
1 GHZ PowerPC G4: silver grey tower, grey apple
1MB L3 Cache
256 MB DDR SDRAM
Computer 2:
10.4.8 OS X
Dual 450 MHZ PowerPC G4: blue grey tower, blue apple
256 MB SDRAM
Computer 3:
10.4.8 OS X
1 GHZ PowerPC G4 IMac Flat Screen:
256 MB DDR SDRAM
I have 2 LaCie Big Disk d2 Extremes daisy chained and connected to the IMac. We use the first to store all of our data to keep our local disks free. The second d2 is the backup to the first. The other 2 computers connect to the d2's via an ethernet hub. The d2's are each partitioned into 4 compartments.
A couple of days ago I started the system up when I got in in the morning, and the main d2 would not open. I ran disk utility, but it said that the drive was damaged beyond it's ability to repair. I ran DiskWarrior, and it gave me this message:
"The directory of disk 'G4' cannot be rebuilt. The disk was not modified. The original directory is too severely damaged. It appears another disk utility has erased critical directory information. (3004, 2176)."
I contacted Disk Warrior tech support and after a series of exchanges that had me send him dated extracted from the terminal function, he said this:
"It appears that the concatenated RAID inside your LaCie
drive has failed (your 500GB drive is actually 2 250GB
hard drives). That is why we only saw 2 partitions
on "disk3". A possible cause could be a failed bridge
in the case.
You may be looking at sending this drive to a data recovery service.
However, it is possible that we may be able to recover data
from the partitions that we CAN see. What we would be doing would cause no damage to your data
unless the hard drives were having a mechanical failure (ie, the
head crashed and was contacting the platters, similar to scratching
a record). But from what I've seen, I don't feel that is the case.
I believe the piece of hardware that 'bridges' the two drives to
make them act as one has failed. that's why we can only see data
about 1 of the 2 drives in the case.
We would only be attempting to gather data off the drive. Since
data recovery services sometimes charge for amount of data retrieved,
it's up to you how you want to proceed."
Most of the data from the past 5 years for our business stands at being lost. Only some of it had been properly backed up on the second drive, due to some back up software issues. I want to do whatever I can to retrieve all of, or at least some of the data. From what the Alsoft technician said, do you think that the data recovery software available to the consumer is going to be robust enough to retrieve at least the data from the one disk in the drive that is recognizable (there are 2 250gig disks in the d2X. Only one is responding at all). If so, do these Softwares further damage the disks? Or should I just send the drive to a data recovery service?
I'd like to try to extract some of it myself via over the counter retrieval software, but I don't know whether to trust these programs?
Any advice would be greatly appreciated.
Thanks in advance.
Peter McConnell
1 GHZ PowerPC G4 IMac Flat Screen Mac OS X (10.4.8) Posted

Peter
My 2 cents:
I have used FileSalvage
http://www.subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
to recover files from damaged disks. It works as advertised, within limits. Some files may be too damaged to recover. More importantly yo get to scan the disk before actually recovering, and it will give you a list of what it thinks it can recover.
My experience was that it recovered approx 85% of the data.
YMMV but they do have a trial.
Regards
TD

Oracle BAM Data Flow Service service could not be started

I can't start the Service Oracle BAM Data Flow Service
I got the message: Error: A service specific error occurred: 126
I follow the steps in the installation guide in the section:Data Flow Service Terminated with Service-Specific Error 126, but i get the error yet.
Any body help please

Check the event logs on the computer with Event Viewer to look for more information.

Continuous Service Date on Service Dates Tab

Similar Messages

Maybe you are looking for