Continuously do a task in parallel of the sequence with fieldpoint modules

I would like to continuously read values on FP-AI-100 while my sequential program is running. When I put the VI out of the sequence, the value is only read once, at the end of the sequence. I'm using Fieldpoint devices and can send my program to anyone could help me.

I can't test demobox.vi but I made 2 parallel while loops ; the first one execute then the second, but never both at the same time... I join my program if you want to look at ; (step five of the sequence)
Attachments:
perso.llb ‏622 KB
sequence_fabrication_4.vi ‏166 KB

Similar Messages

What are the sequence of function modules executed in payroll result

Dear all,
what are the sequence of function modules executed while retrivieng pryroll result.or
functionmodule sequence in payroll programming.
By
bose

Hi Bose,
The sequence of FM executed in payroll result are
1. cu_read_rgdir ---> from this u will get the country key.
2. cd_read_last -
> from this fm u will identify the seqnr for the latest record and finally for the payroll result
3. pyxx_read_payroll_result.

IPhone with Parallels: Does the synch with Outlook work?

I'm using Parallels 3.0 and plan on buying an iPhone. The most important feature is the synch with my Outlook in Windows XP. I'd rather use my docking station than buying further Exchange Server Stuff.
Does the synch work reliable?
Greets Till

I have an iphone and was told that the surface rt cannot be sycned to my iphone like my
Music directly. I think thats crap and am deciding whether or not to get the surface as my laptop. Do you know if it is able to sync music from it to my iphone?

The sequence of system modules & user-defined modules

Hi Experts,
can u help me clear about the execution sequence about system modules , user-defined modules & the adapter of XI/PI ??
I presume the sequence is first adapter ,second own modules, finally system modules at the sender end.
and the sequence at the receiver end is first own modules , second system modules ,third adapter.
im right?
by the way, how about the sequence when the scenario is be setted to synchronization, specially the sequence of the
response.
thx in advance.
Brian.

http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/f13341771b4c0de10000000a1550b0/frameset.htm
1. for async sender/receiver adapters, you use modules before the standard adapter module.
2. for sync sender/receiver adapters, you can wither use modules before the standard adapter module (they will affect the request message) or after the adapter module (affecting the response message).

Parallels to the rescue with Windows7 install

I was trying to install Windows7 beta on a fresh HD. I wanted to make a Boot Camp disk and install Windows 7 beta. I used the procedure per Boot Camp Assistant but when it rebooted with the Win7 disk in the drive all I got was a black screen with the numbers 1) and 2) on the screen and a question asking me to choose an option! No explanation just choose door number one or door number two!
To make matters worse, I could not choose anything. I plugged in a USB keyboard and mouse but no luck. My Bluetooth keyboard was also useless. Huh?
So I thought that at least Parallels might help since it would use the keyboard drivers ok.
I created a new Virtual Machine and chose Express Install. I gave it my product key and walked away. In a few minutes (~15 mins?) I had a working Win7 installation! (64 bit version)
It was easier to install Windows in Parallels than in Windows!
I used Parallels 4 with the latest update (the update process worked great) and I only have 3 Gigs of RAM installed.
I was only testing Win 7 and since it wont run any games that depend on Punkbuster I won't use it for my primary Boot Camp. I still have a working Boot Camp drive with XP on it for that. When Win 7 is finally released I'll investigate it again for Boot Camp compatibility but until then Parallels is just fine for me.
Thanks Parallels

Hello Hatter -
Thanks for the awesome advice and tips. Per usual, you redefine Apple Forum hospitality!
I will indeed look into the tutorials you passed along. As for the Server 2008 - that's going to be a long, new learning curve to me.
I was just learning about Windows server in my last tech. job - but I know nothing about Windows Server 2008. I barely had a grasp of some of Active Directory - and that was a year ago...
The hatter wrote:
http://blogs.vmware.com/teamfusion/2009/01/windows-7-on-mac-with-vmware-fusion-a -practical-guide.html?eurl=http://www.youtube.com/myvideosedit2
Fusion doesn't yet support Windows 7, but using Server 2008 configuration (and turning off 3D) it can be loaded.
No prob for me, I've bailed-out on Fusion. I like it for emulation, but I won't use emulating software - as it ignores my video card - a $2000 tax I'm not ready to pay for emulation... And I need 3D - as that is what SolidWorks is all about.
You and I have pre-2008 Mac Pro with EFI32, the screen is the UEFI 2.x menu which needs to be edited, which I have not managed. Or, install Vista SP1 and do an upgrade in place; or, install 7 on another drive / partition while running Vista which works.
I'm hopeful something can be done!!! I'd really like to use Windows7 64bit within BootCamp - once W7 comes out of Beta. It's my only hope for true 64bit unless I cave and purchase Vista 64bit. I'm just gun-shy of Vista - all those nasty bits about drivers and fuss and all...
But your last bit of advice grabs me: "install 7 on another drive..." (other than my BootCamp drive, right?) - then partition another drive for use with 7? I'm a little foggy on what you're suggesting there - sorry
:-P
I'll watch the tutorials and give things a try - AFTER I pass my CSWP test in a week - and can afford the down time to do all of this.
Cheers -
mp

ITunes 7.0.1 Did not fix the problem with registering modules. Any ideas? T

Dell desktop Windows XP Pro

I have reported this problem several times and no word back from Apple. Don't they monitor these boards or are they too arogant for this?
what a silly boy you are, jimpiatt. did you try reading the help and terms of use? we're a user to user troubleshooting forum:
What is Apple Discussions?
you've also chosen to rant about a problem that Apple Hosts are actively soliciting information about. in this very forum. here's a set of search results on that:
Apple looking for info on registering modules
speaking of searching, did you actually search on "registering modules"? that way you can keep up to date with progress is also being made by your fellow users on troubleshooting the hang:
a search on "registering modules" at the iTunes for Windows forums

The sequence does not match with the original clip

What I have learned about how to effectively match the sequence with original clip is by dragging the imported clip into the new item button, or right click the clip and click on "New Sequence from Clip" button. I did it exactly, however, like you can see in the image I attached, there is a black space under the clip on the sequence and the general quality of video and audio are worse than the original. Why is this happening? Please help.

Is this what you are asking about?

How to move a sequence, and only the media in the sequence?

I need to move a 30 min. sequence, and associated media, to work on a different, remote editing system.
I'd like to just get the media in the sequence with maybe 5 sec. handles. Every test I've run through Media Manager has copied each, complete, original media clip (not just the portion used) - many of which are over 20 minutes long - despite having only used a small portion of each clip. (So in the media manager Summary section the bar graph of "original" amount of space used, is always the same as the "modified"). In the past I think this was called "Bounce"...
2. If I accomplish this, can I email the sequence data only, and have it link up in the original editing system, or will the media file names be so unique that the original system won't recognize them and link up.
Thanks in advance for the help.

Hi -
Question 1: The obvious first question is - did you select Delete unused media from selected items?
!http://www.spotsbeforeyoureyes.com/MediaManagerDeleteUnused.jpg!
If you did, does your media have a Reel Name associated with it?
2) You can email the project sequence information (you will want to zip it first before sending), Then you can relink to the media as long as the media has the same names. If will be a matter of re-directing the sequence to the new directory location of the media - which you will do through the Reconnect dialog box.
But you might want to just buy an external hard disk drive, copy the media and project there and FedEx the whole thing to your collaborator.
MTD

When i run a sequence with ivi step types in simulation mode i get the error code number BFFA0015 - Types do not match.

When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.

Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments

Where can I get the JPDK with the Webservices modules ?

Hello,
I am looking for the JPDK with webservices modules?
And How install it on my OC4J ?
thank
jerome

WebServices provider samples are available in the PDK shipped with
Oracle9iAS Portal. The sample can be accessed using
http://your-portal:port/jpdk/providers/ws
Installation instructions can be found under OC4J-HOME/jpdk/jpdk/doc/webservices folder.
Further detailed explanation about the sample can be found in
PDK-HOME/pdk/articles/how.to.build.web.services.portlets.html.
In case if you haven't already downloaded PDK from portalstudio, here is the link -
http://otn.oracle.com/software/htdocs/devlic.html?http://download.oracle.com/otn/other/PDK.zip
-AMJAD.

Task 0085 for parallel SID assignment terminated with errors

Hi,
While activating the ODS object we are getting the following error
Task 0085 for parallel SID assignment terminated with errors
Can anyone help me on this issue.
Thanks
Sheela Datla

Hi Sheela,
Does the problem happen with activating the ODS object (definition) itself or with activating the data in the
ODS? I think that there must be other errors apart from Task 0085. At the time of the error you should check in
sm21 and st22 for additional error messages and dumps. If the problem is with the activation of data in the ODS
you should also check sm37 for the job that is created for the ODS activation , you may find more detailed
information in the job log. You should also check the activation step in the 'Details' TAB in the monitor for
the load there may also be more detailed information here.
In transaction rscusta2 (ODS customizing) you should try the following setting for the activation:
No. of Par. Proc.    3
Min. No. Data Recs. 10000
Wait Time in Sec.      600
Before changing the values you have in RSCUSTA2 please take note of the values you have already in
case you want to change them back.
Best Regards,
Des.

How to create parallel tasks using parallel for loops

Hi,
I am setting up a program that communicates with six logic controllers and has to read the system status every 100 ms. We are using OPC datasockets for this, and they appear a little slow.
I have created a uniform comm. method for all controllers, and now I find myself programming this method six times to communicate with each system. I am wondering if this could be done more elegant using the parallel for loop, in which case I would program an exchange once and then have six workers running simultaneously. Since a picture is more clear that a thousand words, what I am asking is this:
Is it possible to replace something like
by
and have this for loop running these tasks in parallel (on different cores / in different threads)?
I have configured the loop to create 8 instances at compile, so I would have 2 instances surplus available at runtime if I find I need an additional system.
The benefits of the method show in the second picture to me are:
* takes less space
* modifications have to be made only once
* less blocks, wires and stuff makes it more clear what's going on.
* flexibility in the actual number of tasks running (8 instances available at runtime)
* if more tasks are required, I need only to update the maximum number of instances and recompile, i.e. no cutting and pasting required.
Unfortunately, I don't have those system available yet, so there's no way to test this. Yet, I would like to know if the above works as I expect - unfortunately the labview help is not completely clear to me on this.
Best regards,
Frans
Solved!
Go to Solution.

Dear mfletcher,
First of all: thanks for confirming that my intuition was right in this case.
As for your question on the help: below is a copy/paste from the help on the 'configure parallelism dialog box'
Number of generated parallel loop instances—Determines the number of For Loop instances LabVIEW generates at compile time. The Number of generated parallel loop instances should equal the number of logical processors on which you expect the VI to execute. If you plan to distribute the VI to multiple computers, Number of generated parallel loop instances should equal the maximum number of logical processors you expect any of those computers to ever contain. Use the parallel instances terminal on the For Loop to specify how many of the generated instances to use at run time. If you wire a larger number to the parallel instances terminal than you specify in this dialog box, LabVIEW only executes as many loop instances as you specify here.The reason for me doubting if what I programmed would work the way I intended lies in the fact that the help only mentions processors here, which would be interpreted as actual cores. Thus on a dual core machine, the number should be 2.
I think it would be helpful to mention something about threads here, because in some case one would like to have more parallel threads than there are cores in a system.
In mu case I would like to create six threads, which on my dual core processor would be spread over only two cores. Then these six threads run in parallel.I know that in case of heavy math that would not help, but since I am doing communications, which have timeouts and such, and that probably runs smoother in six parallel tasks even though I only have two cores.
Hope this helps in improving the help of the for loop.
Regards,
Frans

Spawning multiple approval tasks in parallel in OIM11g SOA Composite

Hi,
We are trying to implement the following scenario.
1) We are trying to develop a SOA composite for AD Group Access
2) The request dataset contains a child table for AD User Group Details which is as follows.
<AttributeReference name="AD User Group Details" attr-ref="UD_ADUSRC" type="String" length="20" widget="text" available-in-bulk="true">
<AttributeReference name="Group Name" attr-ref="Group Name" type="String" length="400" widget="lookup" available-in-bulk="true" lookup-code="Lookup.ADReconciliation.GroupLookup" primary="true"/>
</AttributeReference>
3) Consider the user is already provisioned to AD.
4) User now tries to request for AD Group Access by using a request template
5) The request dataSet for the resource "AD Group Access" will be displayed where the user would "Add" the group(s) to which (s)he want access.
6) Once the request is sumbitted the associated SOA composite would be executed.
7) Now, in the SOA composite the logic should be as follows:
a. For each group selected, there is a corresponding dataApprover who should approve the request.
b. Once the dataApprover approves the request it goes to the next approver who is securityApprover.
c. Once the securityApprover approves the request, the request should go thru and the user should get the membership in the AD Group.
d. Since "AD User Group Details" is a child form in the request dataset, the user can add multiple groups in the same request.
e. If there are muliple groups selected in the same request, then the same request should spawn parallel approval tasks for all corresponding dataApprovers and securityApprovers.
f. Then the user should get membership to those AD Groups for which the corresponding dataApprover and securityApprover had approved the request.
e. If a dataApprover or securityApprover rejects the request then the user shouldn't get membership to the respective group. However, this shouldn't prevent the user from getting membership to other groups for which dataApprover-securityApprover approval was done.
The dataApprover and securityApprover for the groups are stored in a db table mapping to the corresponding group name.
We have implemented a SOA composite for which the logic is fine if we add only one group in the child table of request dataset. As per the current implementation, when a user submits the request, the dataApprover and securityApprover for the selected group are fetched from the table and the global variables in SOA composite are set with the ID of dataApprover and securityApprove using setVariableData. These are sting variables. These variables are used in the approval task. The approval task has two "Single Type" participants - dataApprover and securityApprover. These participants fetch the value of dataOwner and securityOwner from the global variables set using setVariableData.
Now, as mentioned above, if mutiple groups are added like group1, group 2 etc. then there should be multiple approval tasks spawned in parallel that will be approved/rejected by dataApprover1-securityApprover1, dataApprover2-securityApprover2 etc. Depending on the output (approve/reject) the user should get membership to appropriate groups.
Any inputs on how to modify the current composite to spawn multiple approval tasks in parallel depending on the number of groups added from the requestDataSet would be helpful.
Regards,
Swaroop

Single request id then you are bit safe. The way to do it would be:
1. Set the dataApprovers as a comma separated list of all the data approvers for all the groups.
2. Set the securityApprovers as a command separated list of all the security approvers for all the groups.
3. In Human Task assign the first stage to all the dataApprovers and second stage to securityApprovers.
Cons of this approach are:
1. All the approvers would see all the data and they might be confused what they are approving.
2. securityAppprovers for say group1 won't get the item untill all the dataApprovers approve the request even though dataApprover has approved the request for group1.
3. Would be hard to implement the rejection cases; depending upon how you want to handle the rejections. For e.g. what if any dataApprover rejects the request? Should the whole request be rejected? If so what would happen to those which have already been approved by dataApprovers? Same case goes for securityApprovers. Again since you cannot modify the requested data once the request is submitted; thus you cannot remove the rejected groups from the request.
4. You provisioning won't trigger untill all dataApprovers and all securityApprovers have approved the request.
5. Any one approve from comma separated list of approvers would approve the request. Thus you cannot make sure that all the approvers should approve the request. The workaround would be to create parallel stages in human task and assign one group/approver to one parallel stage. This would mean that you will have to hard code the number of parallel approvals which can be generated in your BPEL human task (This would again depend upon the number of groups requested). To workaround this you could use BPEL extenal routing program where you can pragmatically assign tasks but again since there is no entitlement based request engine in OIM, thus there would be issues there too.
As a workaround, make sure that you allow only one group to be requested per request and reject the request outright if multiple groups are requested in a single request. You will need to buy in the business on this one.
Have heard the grapevine that 12G which is in the pipeline would have entitlement based request engine and also would allow for modification of request data once the request is submitted.
HTH,
BB

Restrictions on using multiple user tasks in parallel ?

Hi there,
are there any restrictions on creating / managing multiple user tasks sequentially or in parallel in a BPEL process ?
Sometimes my BPEL engine (OC4J/2.0.11) generates an error about "unregistered object ..." and the BPEL process failes.
The BPELConsole then is not able to display the process state anymore.
Thanks,
Wolfgang

There should be no restriction on how many task you can run in parallel. The only requirement is to use distinct partnerLinks (the partnerLink is statefull and embedded the correlation information).
If you are combining flowN and tasks, you can achieve this by using local partnerlink (not supported by the designer but supported by the engine so a local partnerlink can be added to the process using the XML source representation of the BPEL).
-Edwin

Where are my screens!!??? All my task windows work but the main application window where I Can see my work is missing!

All my task windows work but the main application window where I Can see my work is missing!
Help Me!
I have two operational websites that I can't acces!

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Continuously do a task in parallel of the sequence with fieldpoint modules

Similar Messages

Maybe you are looking for