Continuously have to restart apple tv
I'm having issues with apple tv intermittently working and constantly rebuffing. This is happening when I'm streaming, air play, and using home share, pretty much every option is giving me problems. To fix the issue I have to restart apple tv then it will work for a little while. I just bought this 3 weeks ago and believe it might be a hardware issue. I've had no issues with my internet and know that's not the issue. Has anyone run into this issue?
Hello sflip09,
It sounds like you are using various Apple TV services but the connection is is intermitent at best until you restart the device. I would next use these steps from the following article:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
Try restarting your Wi-Fi router or modem by turning it off and then on again.
If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
Apple TV unexpectedly disconnects from the Wi-Fi network or signal strength is weak or fluctuates
Check for any obstructions and adjust the location of your router or Apple TV; also check for sources of potential interference.
Update your Wi-Fi router to the latest firmware.For an AirPort Base Station, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
If after attempting the above steps, your Apple TV is still unable to connect to your Wi-Fi network:
Restart your Apple TV: Choose Settings > General > Restart.
If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and test again.
Thank you for using Apple Support Communities.
All the very best,
Sterling
Similar Messages
-
I continuously have to restart my iMAC to obtain my wireless connection. I am EXTREMELY new to iMAC. Does anyone have the solution to this issue???
Yes, have your network person turn off "hidden" or "invisible" on your WiFi router.
Tell them to see this
WiFi security issues, at home and WiFi hotspots
Cheat sheet to help diagnose and fix your Mac
Most commonly used backup methods explained -
Have to restart Apple TV to get Home Sharing to work, iTunes 12, Yosemite
I am running Yosemite 10.10.2 and the latest Apple TV software 7.0.3 and using the latest build up iTunes 12.
Nearly every time I sit down at the Apple TV to connect to my iMac through the home sharing system that is accessed when you click "Computer" on the Apple TV, I am unable to load video content. The videos just load (spin) forever. My Apple TV has a wired connection to a Apple Router being used as a Ethernet hub. Everything has a wired connection, but Home sharing only works intermittently. The sure fire fix is restarting the Apple TV which will restore connectivity. I have had this exact same set up for a while but have only recently experienced this issue after upgrading to Yosemite and iTunes 12.
I have tried changing the name of he iMac which restored connectivity after Yosemite was loaded initially, but I am still unable to figure out why I have to restart my Apple TV every time to get home sharing to work.On the ATV go to settings and test your network. You must choose the proper network speed you have, its mostly a guess so you'll need to try again if needed. Once done then sign out of home share on the ATV and on the Mac then sign back in and finish by restarting the ATV. This was my sequence of events to get home sharing to work. Airplay is a good backup though.
-
Menus are displaying over the video and I have to restart Apple TV to fix it. Anyone seen this?
I'm experiencing an issue with Apple TV that's annoying. Every so often, when I start video (any video - movie or TV show) that menu doesn't fade out. In other words, I see the Apple TV menu over top of the video, which is in the background. The only recovery I've found it restarting Apple TV. It's happening about 1 in 5 times starting video. Anyone else experiencing this? Is it a known issue?
I'm on release 6.1.1 (6698.99.19)Hi brentdo,
I understand that sporadically the Apple TV menu doesn’t disappear when you play video content. In this situation I would recommend restoring the Apple TV back to factory settings and setting it up fresh. This step should help unexpected or inconsistent behavior within the Apple TV interface. The steps to complete this process are outlined in the following article.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Restoring your Apple TV to factory settings
On Apple TV, choose Settings > General > Reset, and then click Restore.
Your Apple TV will restore to factory settings and will download and install the latest Apple TV software. This process may take some time. Do not disconnect your Apple TV's power cable during the restore process.
Thanks for reaching out,
-Joe -
my new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
Appreciate responding as soon as possible.No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process. -
my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
What to do?
Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
Thanks
VTry this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help
Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
Come on Apple get your finger out and help us here please ? -
Have to restart iTunes EVERY time I want to stream to Apple TV!
I have the 2012 Apple TV and while Netflix, Youtube, etc. normally work well, I have to restart iTunes EVERY time I want to stream to Apple TV! My iMac is always on and the newest version of iTunes is always running. It doesn't seem to matter if the iMac is in sleep mode or not, and I have a very strong wifi signal coming from my Airport Express. Every time - not sometimes - I want to access music, TV shows or movies in iTunes on Apple TV, it says my library is loading, or cannot connect. Every time. What can I do?
WC, When I use the term Home Sharing it is perhaps a little oversimplified, it is quiet impractical and often overkill to continually restate the complete sequence of events that led me to 'a fix', however, I did not suddenly one day find a problem, switch to wi-fi and find all was well. There was significant investigation done on my part to try to find a solution. if by me saying I moved to wifi and it worked, others can move to wifi and have a fix, great. I am not trying to reinvent the wheel here, others much cleverer than me are looking at that...
I had a functioning setup over wired until approx 2 months ago with an ATV2 connecting to Imac library, I was at the time occasionally running some software that restarted itunes once finished which may have masked the problem if it was there, unlikely though. I purchased an ATV3 with a new TV, this upon installation required an ios update much the same time as the itunes update.
I noticed the white light on the atv3 flashing when it was asleep, this was not something i had seen on the atv2, Investigation suggested this was normal behaviour, I remain unconvinced of this.
from that point on 'Home Sharing' did not work until a restart of itunes, it would then work all night (6+ hours)
My mac was set to sleep over night, I tried turning that off-no difference, turned ip6 off-no difference, once it hangs other devices on the network are unable to see the itunes lib, iphone, ipad,MBP etc
Once the thing hangs, Netstat shows a massive quantity of open ports 100/150+ to each on/sleeping atv, a restart of itunes clears this lot. with wired, these connections start to build again, with wireless not so much.
looking back on here shows folks have had this problem in various guises since early 2011, apple by their own admission state the last update 'fixes some issues with Home Sharing', it seems it introduced some for me...
I am quite sure some peoples problems are down to underlying network problems however this is supposed to be 'Home Sharing' it shouldnt need a degree in computer science to configure, it should just work.
I am not about to pull my network apart to troubleshoot any further, between mac & atv's there are 2 x Giga/switches(netgear) and an Airport Extreme(bridged), the atv cable was plugged into the A.Ex no dice and now connects w/less to the same box and works fine... -
Basically whenever I watch a video and I exit out of the video I have to restart my computer to get Firefox back open. If I exit out or go to a new page while the video is playing, the audio continues like nothing has happened. I've checked my task manager and it shows that Firefox is closed. When I try to re-open Firefox I get an error message that tells me Firefox is running but is unresponsive and I have to restart my computer. How do I get it to stop doing this?
Try holding control, alt and delete down in succession and then a dialogue box will appear with windows task manager. Once open click on the Processes Tab and look for firefox.exe. Highlight this and then click end process. It should come up with a warning but just click Yes. This should then close firefox and allow you to reopen it from your desktop without shutting down your computer. Hope this helps.
-
I updated my iphone 4s and now it wont sych with my itunes. It goes through the process and says sych comlete but then nothing is updated on my phone. I have tried restarting everything and restarted the apple mobile device but nothing seems to work. Please help!!!!
ClaireDid "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue. -
Am having all kinds of trouble enabling Home Sharing on Apple TV 3. Had been working previously, but now I am unable to share files between TV, Ipods and iMac. I have tried restarting all hardware, systems and connections. I recently upgraded modem, would this have an effect on connectivity?
U may need to check the settings on ur PC or Mac.
-
I had to bring my Ipad to the Apple Store to have it restarted, I experienced the problem after I downloaded the update. My Ipad was restored however, I lost all my photos any suggestions on how to get them back?
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.
I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.
-
I have changed my Apple ID and password but I cannot access iTunes which continues to use a previous id for which I do not have a password
Is this on your iPad or computer's iTunes ? If your iPad then tap on your id in Settigns > iTunes & App Store and log out of it and then log back in with the updated version of your account. If your computer's iTunes then you can sign out via the Store > Sign Out menu option and that will then change to Store > Sign In option
-
after attempting to update to latest software, my iphone 4 is stuck showing "connect to itunes" picture screen. My computer will not recognize device. I have tried restarting/restoring/hard reset/reinstalling itunes and every other suggestion listed on apple troubleshooting website. thoughts?
The next step is to try recovery mode as described here:
iOS: Unable to update or restore
Maybe you are looking for
-
Is there a way to view an ENTIRE event?
In the old iCal when you selected an event it was displayed in the right side panel. The new iCal doesn't do that and when I double click to see the event the new window only shows the first 4 lines of the event. I use iCal to save the info for the j
-
How I fixed my iPhone and got the update to work...
This sounds silly, but I just kept un-docking my iPhone and then re-docking it. If the error message came up, I clicked "OK" and did it over again. After about the eighth try, it went through and my iPhone is now updated. Hope this helps.
-
Problem with tree view alignment
http://tinypic.com/r/34o1wjl/6 please view the link !! i want the tree for the Finished product just below the Raw Material, where as i am not able to achieve it. The raw material gets place in a separate box and finished in another. the code for the
-
Internal order not posted, backdating
Hello, When AUC is created with investment order was given as reference, but unfortunately, system configuration was given to hide the investment order, hence forth, Controlling document debiting the order didn't take place. The order hence forth att
-
I had a general question about the construction of a SOAP message and if my requirement can be met. I want to expose a web service to return an 'Item' (custom data type) similar to the generated getByKey() service. Now the problem is that the Item ty