Continuously Updating Graph Help

Relatively new too labview. What I am looking to do is relatively simple. I have an accelerometer that I would like to aquire data from. I want to Log 5 seconds of data at 100hz. When I use a waveform graph it does not update until the entier loops have finished. I can get a live updating graph if i use a waveform chart, but the time scale is set to system time (HH:MMS). I simply want it to start at 0 seconds and go to 5 seconds. The data does not need to be logged on the graph as I will simply be outputting to a file.
Is there a way to get a continuously updating graph using a waveform graph or is there a way to set up a waveform chart with a time scale that starts at 0 and goes until a defined value (5 seconds) 

You must use a waveform chart. Not a graph. Goto help in the toolbar, then select Find Examples. Search for chart. 
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

  • HT5704 please help me why i cant continue updating my iphone?

    Hi, I try to upgrade my iphone 3GS version 4.1 to become 6.1, I download the itunes then now why its cannot continue updating my iphone? always says that we are sorry, we are unable to continue activation of this time. Please try again later or contact customer care. Please help me for this problem.

    Most likely, your phone was hacked to carrier unlock.  When you updated, the hack was removed and the phone is now re-locked to its original carrier.  It will now activate and operate only with that carrier, using their SIM card

  • Updating graphs between two VIs

    I have a VI (event-structure based) that generates and displays waveform chart. Due to lack of space on the main VI, I want the graph to be displayed onto another VI. Could anyone please help me with an example, how to implement this? 
    My attempt doesnot update the graph using sub-VI.
    Thanks
    Rajeev
    RY
    Solved!
    Go to Solution.

    A simple example is attached along this email. The subVI is invoked from the MainVI which attempts to zoom the graph, but it does not continuously update the graph data as in MainVI. Thanks 
    RY
    Attachments:
    MainVIGraph.vi ‏51 KB
    SubVIGraph.vi ‏12 KB

  • Stop plots from continuously updating in edit mode

    I have many plots on a graph in the Report section of DIAdem. When I am trying to put lables in for the axes and a title for the plot, every move I make I have to wait like 10 seconds because it re-updates all the plots. Is there a way to stop the plots from continuously updating during the edit phase?

    Hello amaglio,
    I have another indirect suggestion that might help with your questions.
    Starting with DIAdem 2011 we have a new display type that allows you to add points to graphs programmatically, i.e. you will be able to enter the X and Y of a curve you wish to point to and DIAdem will draw an arrow to that point, and move it when you resize an axis system. See example plot below.
    You can join the Beta test for DIAdem 2011 and test this for yourself at http://www.ni.com/beta - you can use my email address (our email addresses are [email protected]) for the NI reference to participate in the Beta test.
    I know that doesn't solve your immediate issue, but it might solve your problem when DIAdem 2011 is released and you will be able to automate the task you are right now doing manually.
    I hope this helps a little.
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Windows 8.1 update continues updating 6 hour after

    This morning Windows ask me to reboot for install some updates, I say yes and now six hours after it continues updating at the same step 'installing update 6 of 12'
    I don't know what to do. Can I stop the updating process? I tried to switch off my computer one hour ago but the computer (laptop) doesn't switch off just sleeps until I press the power button again.
    Some clues?
    My laptop: Toshiba satellite L850-150, Windows 8.1 x64, Intel i7, 8 GB RAM, SSD hard disk.

    Hi Carlos,
    Thank you for the update.
    If any further help needed, please feel free to ask in TechNet.
    Best regards
    Michael Shao
    TechNet Community Support

  • Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

    Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
    System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

    Hello,
    Adobe has brought these new links in this matter:
    Troubleshoot Creative Cloud download and install issues and
    App doesn’t open; progress wheel spins continually
    Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
    Good luck!
    Hans-Günter

  • Continual updating of previews and thumbnails. Why and how to stop it?

    I am switching over to Aperture after having manually managed my files in order to see if there is any benefit for me as my photo collection is getting a bit out of control.
    I have imported as projects all my folders of images. Now Aperture runs very slowly and is continually updating previews and thumbnails. Is there anything I can do to stop this or is this just part of the process of the system going through my files and generating the previews and thumbnails? If so how long can this take? Its been almost a day so far!
    I did read a support document TS1360 which mentioned that items need to be migrated to RAW 2 format from version RAW 1. This would be fine but I have no idea how to find the images if this is the case. If its all my images then that could make for a real mass migration!
    Any thoughts?

    Raw v1 and raw v 2 relate to changes in the raw processing engine between aperture v 1x and 2x there is no need for you to worry about this if your images never resided in an Aperture v1 application.
    Regarding previews & thumbnails, it is a good idea to let aperture build the thumbnails and previews. This will take some time depending on the size of the image files and the quantity of images you imported into Aperture.
    If you have no plans to use the functionality previews gives you can switch off that function in the preferences and in the Library (cog wheel) settings. But previews may be necessary depending on how you have set you your Library and if the files are referenced or actually reside with the Library file structure. Referenced files without previews need to be physically available to aperture for aperture to display them. Referenced files on an external HD with previews will display in the library even if the drive is off line, however the image displayed is only the preview in this case.
    The PPC G5 you have will labour importing large qty's of images for the first time, however given the chance to build everything, it should function reasonably thereafter. But It's (G5) really the absolute minimum and less than ideal platform at this stage.
    Hope this helps.

  • My iPad won't continue updating software?

    I Was updating my iPad Air's software to iOS 7.1.2 and I lost wifi connectivity in the middle... Now  when I go to settings->general->software update the gears are turning but the blue bar is gone and it says that it is downloading without anything actually happening... It has been like this for hours. I tried rebooting the iPad but nothing happened.

    Thank you Briansyddall
    I tried restarting the iPad the way you said I should. It refreshed the iPad but it didn't continue updating. I put the iPad in the charger and then it worked! Turns out the battery has to be either more than 50% full or plugged into the charger in order to update it's software... Thank you for the help though!

  • Apps Store continuing updating Apps even I stopped it

    Pressed "Update All" wrongly in Apps Store. Have "Stop" it but it still continuing updating in background even I off "App background Refresh" & "Auto update". Please help that how to stop updating my apps. Thanks!

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ General
    Select your preferred browser in the menu labeled
    Default web browser

  • Continuously Updating GUI

    Hi,
    I'm just wondering whats the best way to write a VI that includes two parts: one being an event driven GUI and the second being a continuously updating data display (i.e. temperature displays and graphs)? Would the only way to accomplish this to have both the controls and data collection incorporated in one loop and forget about an event structure? Both controls and data collection is for the same device and each command/query requires sufficient time for the device to process. 

    No, have the GUI display the data as well as have an event driven "control" part but put the data acquisition in another loop (or better yet another vi). They can communicate through any number of means; functional globals, queues, etc. Search on Producer-Consumer structures, both here (forum) and in the LabVIEW examples in your LabVIEW installation.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Continuously update time stamp on main panel

    Hello,
    I am trying to continuously update/show the time stamp based of a fixed starting point.  I made a SubVI, to accomplish the task, however, how can I go about using this subVI into a main program?  Alternatively, how can I continuously update the timestamp on the main VI?
    Any help will be greatly appreciated.
    Thanks,
    hiNi.
    Attachments:
    Update timestamp.llb ‏25 KB

    Why you want to read time stamp from Subvi. If you’re not doing anything in subvi (except time) then there is no use. You can simply update your time in Main VI ( as per my previous post).
    Please check this VI. I hope this will help you.
    Munna
    Attachments:
    Update timestamp_MOD.llb ‏31 KB

  • Report for updates Graph

    I'm opening a OGD ( Oracle graphics ) in the form and passing record group to it which updates the graph. Now I want to have report with this updated graph as part of it. The chart item on reports does not show the updated graph but shows the one saved when created in graphics builder. How to get the refreshed graph on report. I want to take print of the graph without using RUN_PRODUCT for graphics.
    PL. Help..
    Thanx
    Regards
    Alankar
    null

    In ConfigMgr 2012, you should be looking at the Software Update group and run the reports based on them.
    <b>Kent Agerlund | My blogs: <a href="http://blog.coretech.dk/kea">blog.coretech.dk/kea</a> and <a href="http://scug.dk/">SCUG.dk/</a> | Twitter: <a href="https://twitter.com/#!/Agerlund">
    @Agerlund</a> | Linkedin: <a href="http://www.linkedin.com/in/kentagerlund">Kent Agerlund</a></b> | <a href="http://www.amazon.com/System-Center-Configuration-Manager-ebook/dp/B008ZSD8QM/ref=sr_1_4?s=digital-text&ie=UTF8&qid=1345615754&sr=1-4&keywords=system&#43;center&#43;configuration&#43;manager&#43;2012">
    Mastering ConfigMgr 2012 The Fundamentals </a>

  • I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    There are no updates to either OS 10.5.8 or Safari 5.0.6.
    If you need a later version of Safari you must first upgrade your operating system to a later version of OS X.

  • My App Store won't allow me to download any apps. It says such and such app is unable to download try again later  every time. I have enough storage all my devices are up to date on all updates  please help

    My App Store won't allow me to download any apps. It says such and such app is unable to download try again later  every time. I have enough storage all my devices are up to date on all updates  please help

    I am a librarian at a 1:1 iPad school and we are having this problem with all ~3000 student iPads as well at ~300 teacher iPads.  This is extremely frustrating.  I have tried suggested fixes found on other discussion boards but none have worked.

  • My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    Repair Disk    Section: "Try Disk Utility"
    http://support.apple.com/en-us/HT203176

Maybe you are looking for