Contion value changes or inclution freight condition aftr GR

Hi Friends
Is it possiblt to add freight condition in PO after Goods receipt ?
Is it possible to cahnge the value of Freight in PO after GR.
Please confirm and procedure for the same
Rgds
Madhavan

HI Madhav,
the Freight is a Delivery Cost so it cannot be added the reason is as below
You cannot enter new delivery costs
You are not allowed to add new delivery costs in a purchase order once goods receipt has been carried out as these would then be proposed in the invoice verification. The related posting to the clearing account for goods receipt and invoice receipt would not then balance, if no further goods receipt took place.
After the invoice has been received successfully, it is not possible to change the delivery costs in the order. This is because information necessary for problem-free operation is no longer available for the delivery costs that have already been posted for subsequent reversals or invoices, or the operation can no longer be done without errors.
hope so it helps
Regards
Anjanna.

Similar Messages

  • Change vendor in freight condition after GR

    Dear All,
    Is it possible to change vendor in freight condtion aftr making GR. Please confirm
    Rgd
    Madhavan

    HI,
    It is possible to change the freight after GR done and MIRO is not done.
    For this in the freight cond type.use cond type FRB1 or copy this and create ur own cond type.
    Then in control data,VENDOR IN GRGIVE VALUE 2 & SAVE.
    When doing migo u can give the new vendor for freight during GR or if u had forgot to change the vendor reverse the GR and then change the vendor.
    This is possible only when u have not done MIRO.
    Other wise in MIRO in details TAB u can enter the new freight vendor in Invoicing party.

  • Issue in maintaining the freight condition in SRM pricing conditions

    Hi All,
    We have maintained the freight condition in SRM pricing conditions But when a buyer try to add the freight condition it does not give any field to add the value.We want the freight condition at the header level.
    Let me know if there is any service needs to be activated or we have to activate any business function to enable this.
    Please find the attached document to check the settings  and actual issue while entering the freight condition.
    This is urgent and please provide your suggestion to avoid this issue.
    Thanks,
    Ankur

    Hi Anil,
    Its not a standard functionality  to get the Header level price condition in SRM PO . I got to know that we need to implement note 1898304 for SRM 7.13 SP01 and activate a Business function.Can anyone let me know how it used to handle in previous versions.
    Thanks,
    Ankur

  • Freight condition value modify after reverse GR

    Hi
    I have done PO with freight condition FR1 and done GR again i reverse GR now i want to change my PO freight value but system is not allowed, in Config i have removed Dlivery cost B in Condition type now it will work but i want to know this is correct way or not or any other option.
    What is use of Delivery cost B in PO,GR or MIRO, please explain this
    Please suggest solution
    Thanks
    Shital D

    Hi,
    I have created two POs with & with out the config option : Delivery Costs - B. But in both the cases, the system does not allow the change in the freight percentage FRA1. For standard conditions like FRA1, the control will be entirely throgh the backend program. If you need to work with configuration/control data of the condition type, please create Z-condition by copying the std condition and try to change the control data.
    thanks & regards
    Chaitanya Rayaprolu

  • Changing Freight condition in PO

    Dear experts,
    I have created a PO with basic price and a freight condition at item level, in the frieght condition I have entered a value. And then the PO is released, GRN also done.  At this moment, I tried to change the frieght value, but could not be possible becuased the field has been gray out (display mode).
    Then I tried to change the same after cancelling the GRN, but then also it didnt allow. Then I revoke the release back ( unrelease) for that PO. Then I tried, but not able to change.
    My doubt is, whether once GRN is done a line item, is it not possible to change the frieght condition at item livel ?
    If I want to change the value of that condition then what I shoudl do.
    Pls help, your suggestions will be appreciated.
    Thanks
    VJ

    Hi
    whether once GRN is done a line item, is it not possible to change the frieght condition at item livel ?
    If I want to change the value of that condition then what I shoudl do.
    Once Po history create it is not possible to change it.
    Regards
    kaials Ugale

  • Service scenario Freight condition value is not pick up in Service entry sh

    Hi,
    I have done Service PO and assigned freight condition in header level as amount 100 and complete the service PO, then we have done service entry sheet wrt Service PO and check in GRN detail we are not getting the Freight value in as 100 separately.
    i am using freight condition as YDFR as delivery cost indicator B assigned.
    User required in freight value in GRN and secondly it is comming in Normal GRN its not showing in service.
    please suggest me
    Thanks
    Shital

    Hi,
    This is clients requirement and we have upgraded in R/3 4.7 to ECC 6.0 so same thing working in R3 4.7.
    so we put freight value as header level in PO and complete the service entry sheet and check the FI doc we didnot get the separate freight amountor not added in also. we get only base value as 1000 not get 100 freight amount. in R3 4.7 it is showing separately
    we need this please guide me.
    Thanks
    Shital

  • Freight condition value at header level for PO

    Hi
    In the PO header freight condition i have given 150RS.
    There are two items in the PO.
    Item1 qty 10 price 10rs/each
    Item2 qty 20 price 20rs/each
    Freight value for item1 is 30rs and unit price of the item is becomg 40rs/each
    Freight value for item1 is 120rs and unit price of the item is becomg 140rs/each
    I want 150rs to be apportioned among the two items like
    30rs for the 1st item
    120rs for the 2nd item
    But the unit price is gettiing increased abnormally.
    PLease suggest how to catter this.
    Regards
    Soumen

    Hi,
    To distribute the price across all the item then for that particular condition type tick the group condition and header condition in
    M/06
    If you tick the group condition then price will be distributed across all the items proportionally.
    Try this and see.
    Raj

  • Header Freight Condition Value to be Spread at Item Level

    Dear All,
    There is an issue i am facing.
    We have a freight condition (header level) in a Stock Transport Order
    There are say 6 line items in the STO. The functional requirement is that the Header Freight Condition Value has to be inventorised on the line items in ratio of their value. Also the header freight amount should get spread only on specific line items ( say of a particular material type )
    Please help me with this issue.
    Regards,
    Adams P

    Dear RamShiva,
    I think below forum document will resolve your issue.
    http://scn.sap.com/docs/DOC-43356
    Regards,
    Haresh Panara

  • Changing Freight Conditions on PO

    The issue that I am having is that we have created a PO with a freight condition. Instead of the price for the condition being for one 1 ton it was for 1 pound. There was a goods receipt already done for this line item. I have tried to back out the receiver and then change the conditions. However it tells me that since we are on the Moving average price that the price for the material will be negative and will not allow me to back it out. Im not sure if when I did get it backed out that it would work. Please let me know how I can make the changes or let me know the process that I need to go through to get this fixed. Thank you very much for you help.

    You can correct the freight price during invoice verification.
    There is an OSS message regarding price will be negative error. You may want to have a look at it as well.
    Lakshman

  • How to change a  value of the field Selection Conditions in Manage- Request

    Hi,
    How to change manualy a value of the field Selection Conditions in Manage infocube -> Requests  ?

    Hi,
    Here is the reason i need to do this:
    The data is loaded by DTP in process chain. Overlaping requests are deleted. But, iIn some cases requests with the same selection options  need not to be deleted. My idea was to change selection options in Manage(infocube) with Abap program without changing selection options in DTP filter,  so that the system would not recognize requests as "overlaping requests".
    So, where is the information about shown in the field Selection Options is stored? In which tables?
    Thanks
    Tigr_Z

  • Delete a Freight condition according to Price condition value

    Hello,
    we defined a Freight condition category  ZTRA with an access sequence, we set condition records. When we create a sale order ZTRA value comes automaticly.
    But if header price condition ZR00 is more than 1000 euros we delete manually header Freight condition as a special discount.
    Can we delete it automaticly ?
    I trier to define exclusion but I do not think it works.
    Is it possible to delete a condition according to another one's value ?
    Should I create a requirement  ?
    Thanks
    Regards,
    Pierre

    hi,
    _*( if header price condition ZR00 is more than 1000 euros we delete manually header Freight condition as a special discount)
    This is clearly a Requirement and hence a routine to be Used.
    Rgds
    Srinivas D

  • PO Condition values changed automatically

    Hi,
    I am facing the strange issue with import PO when PO is opened in change mode me22n all conditions values displayed as correct but when I display the same PO me23n all condition values changed automatically. there is no BADI implementation in PO screen.

    Values in change mode:
    Values in display mode:
    PO is created for account assignment 'A'
    First line item is created with ref. to PR other line items are created without ref. to PR

  • Sale order 'value changes' after invoice creation

    Experts,
    A sale order was created / shipped / invoiced. The invoice did not go to accounting because of credit auth error. We have a procedure to fix it and then release it to accounting (transaction VFX3). All OK until this point.
    While fixing the auth error, an user changed the freight condition value in the sale order. Then invoice is released to accounting. Now, the value of freight in order and invoice match. How is it possible to change the value of an invoice after its creation?
    Any input would be appreciated.
    UV

    when the value is changed in the sale order, it would automatically transfer
       the new pricing to the existing open SD invoice pending accounting entry??
    Certainly not.  The control is in VTFL where if you select the billing item category for the combination of your delivery type and billing type, you can see a field "Pricing Type".  If you maintain any value other than "B", system will copy the price from sale order to billing and you can, as I said above, can change manually in billing.  On the other hand, if you have maintained "B" in the above field, system will not  consider sale order price but will check your pricing condition maintained in VK11 which you can check in VK12 or VK13.
    thanks
    G. Lakshmipathi

  • Freight condition modify after reverse GR

    Hi,
    I have done PO with freight condition FR1 and done GR again i reverse GR now i want to change my PO freight value but system is not allowed, in Config i have removed Dlivery cost B in Condition type now it will work but i want to know this is correct way or not or any other option.
    What is use of Delivery cost B in PO,GR or MIRO, please explain this
    Please suggest solution
    Thank

    hi
    it is not possible to change value once GR is done
    go for addition of new item (copy of original )
    or take the freight in unplanned del cost

  • Change history (for perticular condition type) in scheduling agreement

    All SAP Gurus,
    We have a scheduling agreement, in which certain condition (condition type for freight condition) value have changed several times.
    Where we can find the changes in the value of this condition type?
    Regards,

    Hi Rajan,
    You should be able to see in
    Item -- Statistics -- Changes. You can find that line item wise.

Maybe you are looking for

  • Read data from excel sheet and then perform the required operations.

    Hi all I need to write a procedure which can read data from excel sheet.I have excel sheet in which i have to options one is modification and other is addition.so if it reads modification then i need to read the concerned table name then check its av

  • [SOLVED] Since updating to Java 1.6.0_33 on my MacBook running OSX 10.6.8, websites say Java not installed in Firefox, but works in Chrome

    I work for User Testing, which uses a Java-based screen recorder to make videos of people using commercial websites and offering spoken feedback on the site. Since installing the Java 1.6.0_33 update for Snow Leopard on my MacBook, the User Testing s

  • HTML tags amidst JSTL

    I am trying to print a text in bold, using the following code: <logic:present name="letterGenerationForm" property="arlTemplateHeader" > <logic:iterate name="letterGenerationForm" property="arlTemplateHeader" id="headerValues" > <b><bean:write name="

  • Period of TDS Certificate

    Hi If I give the Post dates  From 01.01.2009 to 31.03.2009 before generating TDS Certificate(T.code J1INMIS When I am taking TDS  Certificate for one transaction(20.02.2009) for a particular Challan payment  it is giving correctly period   From 01.01

  • Split cache config file support in 12.1.2?

    With 3.7.1 you could use the coherence-common library from incubator 11 to split cache config files. This was done with the introduce-cache-config XML element: <?xml version="1.0"?> <cache-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"