ContourHD - is anyone else using one with QT Pro on PC?

Hi,
I was wondering if anyone else is using a VholdR ContourHD with QT Pro?
http://www.vholdr.com/contourhd/overview
I'm looking for some assistance on video conversion from the native format (http://www.vholdr.com/contourhd/techspecs) it records in to something that i can burn to DVD / Blu Ray using Roxio Ultimate 2009.
I did a search for ContourHD, and got no hits hence the post.
Thnx

I'd suggest you ask in Roxio's forums for Creator 2009, since that's the software you wish to use. Roxio's specs for that software indicate that it should be able to support the ContourHD's format directly, so you shouldn't need QT Pro or any other conversion software.
Good luck and regards.
Message was edited by: Dave Sawyer

Similar Messages

  • Is anyone else having trouble with surface pro 3 + kinect v2?

    I'm running a cpu intensive Kinect v2 program on a surface pro 3 (all updates installed). It typically consumes about 50% of the processing when the cpu frequency is 100% (all CPU and networking, no graphics)
    The problem is that sometimes when  I run the program the cpu frequency (as reported by the resource monitor) does not move from it's idle state of 33% so my program chokes. If I remove the power cable, the cpu frequency immediately jumps to 100%. If
    I then replace the power cable the cpu frequency will stay at 100%. My program will keep on running fine for a while and then the frequency will drop low again - I can then repair it by removing or replacing the power cable.
    Obviously this program is intensive and the fans turn on to cool things down, so I originally thought it was a overheating problem, but the problem can occur immediately on running the program when the surface has just been booted and is completely
    cold, or not occur when it's hot. I've tried the power options (not many on the surface) and they have no noticeable effect.
    Does anyone have any suggestions as to how I can get the max performance from the cpu and keep it there? Why should the power cable have such an effect?
    thanks
    --Kim
    --Kim

    Are you running a WPF application or a c++ application? Try running any of the D2D samples at the same time, to see if that changes the behavior. When you boot the machine was power connected at the time? There are different hardware states
    a system can be in based on running on battery vs plugged in. Is the system charging the battery at the time it is plugged in?
    If on battery the assumption is you need to conserve which the operating system/hardware will operating in an energy efficient state until which time it is forces to run 100%(games or other graphic intensive work). CPU bound operations only may not trigger
    the step up to full speed depending on how the operating system is handling the specific processes. The nature of WPF it was designed to update less often since line of business applications typically don't change the screen that often, so it was designed
    to be more efficient that way. Where D2D/D3D applications run at full speed no matter what.
    Carmine Sirignano - MSFT

  • Using XVID with Premiere Pro CS3?

    I'm trying to export to video using XVID encoder, two pass. I start the first pass, an XVID status window appears, and then it appears to get stuck.
    Has anyone here used XVID with Premiere Pro CS3? If so, any suggestions?

    Thanks, I'll try the options on XVID. Currently I've been exporting to raw AVI, then using AutoGK. I normally don't do use XVID, but for a partcicular racing game, there are some telephone wires that appear less aliased with XVID mpeg4, than the encoders you get with Premiere. I've tried the mpeg2, mpeg4, and windows encoders, and don't get quite the same results. One of the final destinations is a you tube "hi-def" video. I also make windows movie files since they also can be viewed while streaming via Windows Movie player. My web host throttles throughput to 350kb per second now, so I keep most of my videos at 640x480 at around 1972kbps for the video, 128kbps for the audio. <br /><br />Example wmv video from racing game<br />http://jeffareid.net/nfsuc/nucreoznds.wmv<br /><br />Example youtube video same video (<ctrl>+click to open new window):<br />http://www.youtube.com/watch?v=wQuRfJMgsms&fmt=22<br /><br />Better example of youtube video, I don't know if it's content related or if youtube compressed better. This video was uploaded well before youtube had hi-def, but apparently they keep the original and re-encoded it for me. This is of a radio control glider at a slope site. Click on the lower right icon box to toggle between desktop and full screen (<ctrl>+click to open new window):<br /><br />http://www.youtube.com/watch?v=LUVRUMc7DP8&fmt=22

  • Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
    Has it returned to normal for you?

  • Is anyone else having trouble with Flash Player in Mac OS X Yosemite using Safari.

    I can't install, it gets to 30% downloading and stops.  I deleted it completely from my computer to no avail, same problem happened when I tried a clean install

    madgaxed *Is anyone else having trouble with Flash Player in Mac OS X
    Yosemite using Safari.*
    created by sofd5928497 <https://forums.adobe.com/people/sofd5928497>
    in *Installing
    Flash Player* - View the full discussion
    <https://forums.adobe.com/message/7325446#7325446>
    I have the same problem!!!
    If the reply above answers your question, please take a moment to mark this
    answer as correct by visiting:
    https://forums.adobe.com/message/7325446#7325446 and clicking ‘Correct’
    below the answer
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    https://forums.adobe.com/message/7325446#7325446]
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed an image in your message please visit the thread in the forum
    and click the camera icon:https://forums.adobe.com/message/7325446#7325446
    To unsubscribe from this thread, please visit the message page at [
    https://forums.adobe.com/message/7325446#7325446], click "Following" at the
    top right, & "Stop Following"
    Start a new discussion in Installing Flash Player by email
    <[email protected].hosted.jivesoftware.com>
    or
    at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 36>
    For more information about maintaining your forum email notifications
    please go tohttps://forums.adobe.com/thread
    <https://forums.adobe.com/thread/1516624>
    22 марта 2015 04:07 пользователь "sofd5928497" <[email protected]>
    написал:
        Is anyone else having trouble with Flash Player in Mac OS X Yosemite
    using Safari.  created by sofd5928497
    <https://forums.adobe.com/people/sofd5928497> in Installing Flash Player
    - View the full discussion
    <https://forums.adobe.com/message/7325446#7325446>

  • Is anyone else having problems with the Canon Online Store?

    In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
    I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store.  They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
    Is anyone else having problems with the Canon Online Store?
    Why does Canon not care to track reported problems with the storefront part of their web-site? 
    I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far.  Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not.  In trying to register that lens, I looked up on the Canon web site where to find the serial number.  Since my new lens did not have any numbers there, I was concerned I had been sold a fake.  But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was. 
    Is Canon like that with other problems, as well?  Or is their "batting" average better than my very limited experience? 
    I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral":  EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)! 
    Regards and Thanks,
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

    Hi Danny.  Thanks for replying.
    I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years.  And, yes, it is the latest version.  Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT?  WHEN did Canon STOP SUPPORTING Firefox?
    I've been told that there are 2 pending orders in my account.  Yet, I NEVER placed those orders!  WHY CAN'T CANON SEE THAT THIS IS A PROBLEM??? 
    Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place!  But, maybe that's a bit too grown up of an answer for you! 
    "Award-winning" support???   And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS???  The OSTRICH?
    Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
    Thank you for your "prompt" attention to this matter!
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

  • Is anyone else having issues with Aperture 3 since downloading Lion?

    Hi All,
    Is anyone else having issues with Aperture 3 after downloading the Lion update? Aperture 3 is running so ssssslllloooowwww !!! I am a sports photographer who needs this to run the way it used to with Snow Leopard. Any suggestions?????
    Thanks,
    George

    It was one of the many issues I had when I was running Lion. I watched the beach balls and the very, very slow rendering of image edits and restored back to my SL clone immediately. It was looking like Aperture 2 and my sanity just couldn't take that again.
    I have to assume that Apple must have tested Lion with Aperture 3, but you wouldn't know it from how it behaved on my system.

  • Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

    Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

    That's because part of iOS7 had code in it to look for and recognize unsigned cables.
    In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

  • HT3702 has anyone else had promblems with apple itunes debiting your account unauthorized!

    Has anyone else had problems with apple itunes debiting your account unauthorized!

    I have also experienced this. I've downloaded the 'No Surprises' ringtone by Radiohead three times and every time I get charged for the ringtone by iTunes and every time it disappears after a while. This is really strange... I haven't talked to anyone at Apple about this, but I checked these forums out just now and, it seems, I'm not the only one with this problem.
    I'm using my brand new iPhone 6 Plus with iOS 8.1.1 and I'm thinking it's a software-related problem too...

  • HT4623 Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??

    Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??  Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen.  Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?

    Hello, cliffiapp4.  
    Thank you for visiting Apple Support Communities.  
    Here are the steps that I would recommend going through when experiencing this issue.  
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding
    http://support.apple.com/kb/TS3281
    Cheers, 
    Jason H.  

  • Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

    Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

    The "solution" is probably to increase your knowledge.  You've done good things.  Perhaps this article will educate you a bit more about location services.
    Basically, they can be very useful, but can cause a lot of iPhone use.  A major example is "Remind me to ... when I leave home."
    http://support.apple.com/kb/HT5594

  • Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    So, don't use youtube.
    http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
    http://www.youtubealternative.com/

  • Is Anyone Else Having Problems With 10.6.1 Freezing?

    Is anyone else having problems with iTunes 10.6.1 freezing? On a perfectly-maintained Windows PC, 10.6.1 is suddenly freezing for no reason. This means that my iPhone or iPad can't be synchronized.

    From my experience, involving three hours of troubleshooting using Apple's tutorials, without help from Apple:
    1. Do the steps here to remove and reinstall all Apple software on your machine, "Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP," at http://support.apple.com/kb/HT1925.
    2. If you care, they don't tell you or ask you to uninstall MobileMe in those steps.
    3. After I did as they wrote to do, iTunes wouldn't recognize either my iPhone or iPad. On my own I found that Applie's software reinstallation failed to install the Apple Mobile Device Software Driver. So I followed the steps at, "iOS: Device not recognized in iTunes for Windows," which took me 25 minutes alone to find. See http://support.apple.com/kb/TS1538
    Those steps solved everything and iTunes is now back to normal.

  • Does anyone else use a PDF form to extract data they can then use to populate Dynamic Content in Ill

    Does anyone else use a PDF form to extract data they can then use to populate Dynamic Content in Illustrator?

    You can connect the form to the DB using anODBC connection. This functionality comes as part of Acrobat but the form must be Reader Extended by the full LiveCycle Server version of Reader Extension to allow this in Reader. In your case, if your system is the only on ethat will interact with the DB then this might be a viable solution (but you woudl have to use Acrobat). This solution woudl involve create an ODBC connection in your system then configuring the form to make use of that connection.
    Does that make sense?
    Paul

  • Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters?

    I recently tried to install Adobe CMM, as a pop-up window suggested after I installed Photoshop CS5 on a new computer, running Win7x64 Ultimate. Before trying to install CMM, my Akvis Sketch Plug-In for Photoshop worked fine. Afterwards, Akvis Sketch runs under the filters menu, but will not accept mouse clicks from my Wacom tablet. Prior to Adobe CMM, all was fine. Somehow, the frustrating attempt to use Adobe CMM broke links to Akvis Sketch.
    By the way, Adobe CMM setup tried to run and vanished without a trace - no indication of success or failure. CMM doesn't show on my control panel as installed software, so I can't de-install it.
    I did un-install Akvis Sketch and re-install it. No luck as a filter, nor as a stand-alone program.
    Additional point of interest - a second identical software/hardware workstation continues to run Akvis Sketch just fine because we didn't try installing Adobe CMM on that machine. It certainly looks like CMM is the culprit here.
    Since Akvis Sketch is broken as a stand-alone, I doubt that de-activating, uninstalling and then re-installing, re-activating Photoshop CS5 will help, but it will take a lot of time to recreate actions and re-install other add-ins, plus preferences settings.
    Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters, and have you found a work-around?

    Thanks for your response. Recent evidence points to Wacom's tablet driver, not the plug-in.
    Fact #1 - another identical system with ms mouse worked fine so I swapped out the Wacom tablet and bingo, the Akvis plug-in works again.
    Fact #2 - So does Amazon's Kindle for PC app, which also quit working after running the Adobe CMM setup I'd downloaded.
    Suggestion - since there's a legacy for CS5 users getting the "you should download CMM" pop-up, yet no need to do this, maybe Adobe should remove the CMM download page from its website - or flag this download as unneccessary for photoshop users. All Best, Charles Pierce.
    Message was edited by: PECourtejoie Please do not autoquote messages, it makes threads difficult to follow.

Maybe you are looking for