Contract accound payabale and receivable
Hi,
Can anyone explain me the business process and its procedure of contract account payable and receivable in ISU?
-Ganesh
Hi ganesh,
you can go thru this link to get the detail info about Contract AP/AR.
http://help.sap.com/saphelp_utilities472/helpdata/EN/28/16983538ee425ee10000009b38f889/frameset.htm
lemme kno if it is helpful and marked the thread as answered.
Regards,
Abhishek
Similar Messages
-
Trouble send and receiving messages and trouble calling people or receiving phone calls
Hello everyone, I bought a Blackberry Q5 one year ago and has worked perfectly since but on christmas day I had was struggling to send message to people I thought nothing of it since it was christmas and people would be wishing there families and friends a merry christmas. So i just carried on as usual not aware that the problem was much worse then i thought, since then I have tried time and time again to try text people and call them but nothing would happen.
The Problems I am experiencing,
Everytime I try sending a message it fails and times out after a while doesn't matter whom they are being sent to it's the same story no matter who I send them to, and then of course when i try calling someone the phone goes to the calling screen but doesn't make a sound for atleast 10 seconds then a message pops up saying "Call Failure, The call could not be connected. Please try again later". This message appears even when I ring '789' which is the number to find out what my balance is on my contract.
At first I thought it was the Sim what was cauing the problems but when i swapped it into another Virgin phone i received quite an alarming amount of messages what would not come through on my phone, this is when i realised I am not just struggling to send messages but to receive them as well. I have scoured the internet for possible answers but nothing has worked, so far I have tried manually scanning for available networks and selecting the correct one which did not change the problem this didn't make things better nor did it make things worse.
I have also tried changing the data services while roaming settings which again did not make any differences, I have tried changing network mode no changes again, turning the mobile network off all together and then turning it back on after 5 minutes no success there either. I have even reset the phone back to factory setting to try and fix the problem, but no, the problem still will not go away.
Please if there is anyone out there who has any ideas on how to fix what is happening to my phone please do give me your advice, at this moment I really need a miracle to come around at the next corner.Hi rhupa!
Here is an article that will help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Connection Doctor shows one or more red dots in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Why won't Apple give out the unlock code for an iPhone 3Gs when the 2 year contract was honored and I continued to be an AT&T customer with an iPhone 4. I wanted my old 3gs unlocked so my daughter could use it overseas when she is deployed. AT&T service over there *****, the international plan was not worth it. The individual SIM cards per country are much more reliable and cheaper. Teslestial in Iraq and Afghanistan, Telecom in Croatia,Vodafphone in Germany and Italy. Why Apple will not unlock these phones for our military to utilize is incomprehensible to me. These young men and women are fighting for these Apple people to go to work every day, safe, to live lives they have become accustom to yet releasing a phone to use on another network they can't do at least for the military.... WHY APPLE?? WHY? A good excuse not some of the many lame excuses I have received on the phone many times. AT&T states it is Apple that will not allow them to unlock the phones... Please tell me why? All I want Is my daughter to have a phone I trust, to be able to call me when she is given the free time to do so and I trust the apple phone.
Apple, please reconsider your stance on this issue. I am having a hard time understanding why you will not unlock the iPhone.
A simple code could allow me to talk to my daughter while fighting for our country the Great USA. Apple should be on the front line and enabling those fighting for our life, liberty and pursuit of happiness to use unlocked phones on reliable local GSM networks.
I honestly hope that someone who has some sort of authority to begin allowing the release of unlock codes, and not forcing people to unlock their phones with some program produced by some hack just to be able to use your wonderful phone. That is is in a nutshell, People love the iPhone so much that they want the ability to use it on the most reliable GSM carrier available to them. That should be a major compliment. Even men and women on the front line want your phone. I agree, my service is not the best where I live either, love the GSM technology so stay with it, but if I had the ability to change to the other GSM network that has much better coverage in this area of the country I would change. To change now I would not have my iPhone and that I will not part with.
Apple, please reconsider opening up the lock code and allow your gem of a phone to be used by many more people in many more areas and most importantly overseas fighting for our country. I know if this is really thought about Apple would understand and come to the conclusion to release the unlock codes, and stop the people from hacking in to use the iPhone on other networks.
I would love for my daughter to be able to use my iPhone 3gs while fighting for our Free country.
A response would be appreciated.
Thank you.
An Apple customer for 10 years, phones and computers.
PDefiled:
I did sign a two year contract and completed that contract. The 3gs is no longer in service. My daughter is going overseas to protect you and your family. I was attempting to find a way for her to have a reliable phone that could offer her some connection with home as she travels through the middle east. She travels in missions all over.
At&T unlocks other phones of theirs why not the iPhone? AT&T says that Apple will not give them the code, it is not the carrier. If I would have known this situation would have come up I would have bought and unlocked 3gs phone"Deggie" . My main complaint is that Apple has not good excuse as to why they will not allow their phones to be unlocked from services well, AT&T . I bought the phone full price, completed the contract terms, even went for and iPhone 4 with another2 year contract, along with owning an apple computer... I love the product. My main issue is give me a good answer as to why you won't allow a phone to be unlocked. It doesn't hurt Apple, People still have to buy the phones from them, and use their App store and iTunes.
Sorry, just upset about my daughter heading over there, boots on the ground, and just pray she will be safe. Would have liked to facetime her while she is in the airports and in specific areas allowed for that.
Please don't come down on me for asking this question. I understand all the contracts etc.... but to single out the iPhone specifically to not unlock after contract is over does not seem fair.
Thank you for your responses. -
What are the config steps for contract mass change and quota arrangement?
Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj KumarProcess Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
1. Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
2. Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
3. Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
4. Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand. -
Open Qty and Received Qty for Open Purchase Order.
How to Fetch the open qty and received Qty of every Open purchase orders in EKPO table where ELIKZ = SPACE OR LOEKZ = SPACE. What are the table and field used? Kindly help me.
Hello Senthilramkumar,
Use ME2L/ME2N/ME2M with selection parameter WE101.
Hope this will help. -
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
How to send IP Addr in an alert and receive the same?
1. I have an 'alert handler' process that's sending an alert using 'Create Alert' activity.
2. I have a listening/receiving process that get's triggered by this alert from the 'alert handler' process.
3. The listening/receving process telnet's to a router. I want the listening/receiving process to extract the IP Address of the router from the alert that triggered this listening proecess.
4. I tried sending the IP address of the router as 'Parameter 1' using the 'Create Alert' activity in the 'alert handler' process.
5. In the receiving process, in order to telnet to the router, I chose 'Execute on this target reference' option for the 'Open Terminal' acitivity, but was unable to access 'Paramter 1' of the alert. It shows greyed out.
Question:
What is the best way to send the IP address of the router in the alert and receive the same in the listening process such that I can telnet to that router in the listening process?
Please note: tried creating a 'terminal target'...there is no way for me to supply IP address info from outside into terminal target...looks like terminal target only takes a hard coded IP address or host name.
Will appreciate your prompt response please.
thanks,
JamalWe discussed this, but just to post here. To view alert or other tasks parameters via the reference variable fields you have to select the show advanced checkbox.
-
On Imac I am not able to send or receive messages. All software is updated. My iPad that uses the same email address and the Cloud, sends and receives just fine. It is not "the colored" thing that is spinning but the little black and white circular icn that is spinning away. My other email address is functioning fine. It is merely the ICLOUD based email that is acting up. Any ideas?
First try deleting the account and reinstall it.
-
What is diff b/w contract with doc and w/o document?
hi
what is diff b/w contract with doc and w/o document?
regards
Ram]
Edited by: Ian Wong on Aug 13, 2008 7:01 PMHi,
Are you taking about Distributed contracts..if not then pls elaborate your question..explain properly, its use, where is req. etc..
Regards
Priyanka.P
Edited by: Ian Wong on Aug 13, 2008 7:02 PM -
My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.
Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?
To my knowledge, I've only seen this for imessage only and not SMS.
The other users would need to have send read receipts enabled on their phone. -
my Iphone can call ut and receive text/email messages but is not receiving incoming calls. What is your thought?
Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy -
I have an IPhone 4 , which is on a Vodafone network, when I try and make outgoing calls it says 'call failed' . I am still able to send/receive SMS and IM and receiving calls is also so problem, does anyone have any solutions?
You need to contact Vodafone.
-
How do I shut off receiving phone and text messages when I am out of the country. I still want to be able to email and receive email on wifi
Enable Airplane mode followed by turning on wi-fi access.
Maybe you are looking for
-
I am frustrated. With the no squint, which has a mind of its own, then some pages are fine, in others the type is too big or too small for the frames. If I use the default Firefox zoom that is no better. I have to set things for like 130 percent and
-
Vendor down payments recovery mangement
I am working on an MIS report in which I have to mention the Original down payment given to the vendor against the current outstanding advance and ageing analysis. As per the current practice in our company while accounting the recoveries against run
-
How do I find my downloaded guitar lessons?
I recently downloaded some video guitar lessons that I had purchased from a website using firefox as my browser. Don't know what version it is but it was updated very recently. The computer i used is a toshiba satellite C655 with windows 7. The probl
-
Using Text_IO in Oracle Reports 6.0
Hi. I ask again, perhaps someone can help me: I want to add a function to a column to write every row to a file (such as a .log-file). In Example i can simply write into a file like this: "Trigger - after parameter form": file_out Text_IO.File_type;
-
Can our exchange student use her German iPhone 5 here in Minnesota? What do we need to do to make that happen?