Contract account not found and replicated to ISU

Hi Experts,
Our users created s3 contract account in the Production system. But upon searching for 2 of them
they are not able to find these two contract accounts in CRM as well on ISU side.I have also checked the queues and Bdocs if any one of them got failed but I am not able to find those as well.
Can any one guide what can be done to find them and replicate the same to ISU.
Regards,
Manish
Edited by: manish.dodeja on Jun 25, 2009 11:11 AM

Hi Haresh,
Check with middleware settings there must be something left out like in T.Code SMOEAC (Check Publication and Subscription) Business Agreement should be there..
Check T.Code: CRM_BUT_CALL_FUN
Depending on the business agreement class, the contract account templates are stored in SAP ERP
in table TFK_BUAG_REF.
You can find this table in Customizing for
Financial Accounting under Contract Accounts Receivable and Payable-> Integration->Customer Relationship Management-> Business Agreement ->Determine Template for Contract Account for Replication
Use FI-CA event 1023 to determine whether the busines agreement should be selected as a standard business agreement when it is downloaded. You can check the contract accounts of the business partner and decide whether you want to select the checkbox.
Also check FI-CA event 1022 (see tables TFKFBM,TFKFBS, and TFKFBC in SAP ERP).
Let me know if your issue is resolved
Regards
Ripunjay

Similar Messages

Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1. Check the combination of Account modifier of Purchase order account assignmnet or PR. Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2. If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

Why I can't sync firefox after using "restart with Addons disabled"? Why It's showing account not found?

I'm using firefox sync with multiple desktop and laptop, even with Linux and windows environments since long, without any problem. Recently, I've used "Restart with addons disabled" option. Since then I can't setup sync. It's showing account or usename not matching!!! When I've tried to reset the password then It's showing account not found!!! But I've checked several times about username and password. Interesting on my laptop Firefox sync works perfectly, without any issue.
I really need to solve this issue ASAP. I really , really want to continue using Firfox.
Please help. Thanks in advance.

Is there still a name and password and Sync key saved in the Password Manager?
You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
*Firefox/Tools > Security: Passwords: "Saved Passwords" > "Show Passwords"
Look for:
* chrome://weave (Mozilla Services Password)
* chrome://weave (Mozilla Services Encryption Passphrase)
You can try to remove all services.sync lines from the prefs.js file in the Firefox profile folder and possibly delete or rename the Weave folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

HT1923 After updating Itunes it stopped working. I removed Itunes and reinstalled and i am getting the foloowing errors MSVcr80.dll not found and Itunes not installed correctly error 7 (window errror 126) How do I fix this?

Yesterday I updated my Itunes account and it stopped working. I tried installing itunes version 11.1.4 and once done it came back with 2 error messages MsvCR80.dll was not found and I tunes was not installed correctly Error 7 (windows error 126) I have removed Itunes completely and redownloaded several times with the same result. Is there an easy fix or can I download an older version of Itunes that works?

None of the solutions mentioned in this forum work for me. I've not ever had a problem with your software before. I installed and uninstalled itunes 3 times. No itunes directories exist. I've uninstalled everything labled Apple on my pc withe the same results. The problem is with your software not Windows.

Error "Account not found" in Catalog

Hi All!
I have a problem with the catalog of OBI EE.
When connecting to multiple users showed the error "Account not found".
I've located the "Catalog Manager" accounts whose permits were <delete Account>. I deleted those accounts and have been fully rebuilt. These accounts are already functioning.
But to connect to the "Presentation" with the manager and access the option "Manage users and groups" by clicking the link "Show users and groups," again gives the error "Account not found". The log shows:
An error occurred during execution of "connect". No connection could be made Actively Because the target machine refused it.
[Socket: 868]
Type: Error
Severity: 42
Time: Mon Oct 26 13:31:01 2009
File: project / WebSecurity / securitymanager.cpp Line: 84
Properties: ThreadID-6808; HttpCommand-getAccounts; remoteIp-10.12.127.129; User-Administrator
Location:
saw.httpserver.request
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
Account not found.
Any ideas?
Regards.

When you log in into presentation services as administrator, you can still see these users in the user list? You have to delete them not only via the catalog manager, but also overthere.
And restart your services once...
Hope it helps.
Kr,
A

IHC errors valid clearing partner not found and no header details found while idoc creation after f110

IHC errors :valid clearing partner not found and no header details found while idoc creation after f110
Please let me know where the config is missing for ihc automatic payment program.in we02 status is not 53.
Please help

Hi
Please share the error message in the IDOC.
If the error message is IHC204 "No valid clearing partner was found", it may be due to the missing correct configuration in Set Up Creation of Payment Requests for Inbound IDoc in FI, which links the clearing partner, ALE logical system partner type and IHC account number.
Cheers
taro

When down loading new version i keep getting MSVCR80.dll not found and I now have no itunes

I have just up dated my i tunes and whenever i try to start it i get this essage : MSVCR80.dll not found and itunes refuses to open. i have tried re-installing etc but nothing works. Any ideas?
muzz

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Linked Server [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wall

Hi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Error: Datasource name not found and no default driver specified

HI All,
I have MySQL as my data base.
I created one universe on top of MySQL. Then i made one webI report on top of that and exported it to BO Portal (Infoview).
Now when I am refreshing this report, it gives me below error in Infoview while its getting refreshed in WebI.
[Database Error] [Microsoft ODBC Driver manager] Datasource name not found and no default driver specified.
WIS 10901
I found SAP Note 1200396 and have created DSN with Same name on Server.
But still I am facing same problem. I have not clustered enviroment.
Guys any one have some idea about this?
I will appreciate your answer.
Thanks in advance,
Rishit

If your BOBJ server runs on 64bit windows you should set up the DSN using the 32bit ODCB utility (<Windowa installation director>\SysWOW64\odbcad32.exe )
Regards,
Stratos

Data source name not found and no default driver specified.

Hi all,
I am using Microsoft Accessas as backn'd. when I am starting my Presentation Services I am getting this error> Data source name not found and no default driver specified.

Your presentation services configuration file
$SADATADIR/web/config/instanceconfig.xml
contains an entry DSN which is the connection to the bi server
then inside your RPD(s) loaded by the bi server
you will have various connection pools in the physical layer
which connect to physical data sources such as MS Access
you can test a physical database connection
by right clicking a physical table
then "View Data" or "Update Row Count"

Webi Refreshing Error :database name not found and no default driver specified

Hi All,
When I refreshing the webi report from Launchpad getting bellow error
"database name not found and no default driver specified"
Bellow is the Screen shot
It is refreshing in webi Rich client (server and client tools are in same system) but not from Launch pad
1. Environment :BI 4.0 SP4
2. Server and client tools are installed in same system
3. Created a 32 bit odbc, universe connection is responding properly and report refreshing in rich client(I could not find 64 bit odbc) .
Can Please suggest me where I am doing wrong
Regards,
Mahi

Hi Mahi,
Seems like your BO server is 64 bits and you have created a 64 bits DSN; whereas your database requires 32 bits DSN.
Try below steps:
1. Navigate to the C:\Windows\SysWOW64 directory and open odbcad32.exe. This will open the ODBC Data Source Administrator for 32-bit drivers on the 64-bit server. NOTE: The ODBC Data Source Administrator that is located by clicking Start and Administrative Tools will only create 64-bit ODBC connections.
2. Click on the System DSN tab
3. Click on Add to create a new Data Source
4. Provide the database details
5. Your 32-bit ODBC data source is now ready for use.
Hope it will help.
Regards,
Yuvraj

Contract account not found and replicated to ISU

Similar Messages

Maybe you are looking for