Contract after rejection is not routed to contract owner

Hi,
I am facing a very strange issue in PCW for contract . After rejection the contract is not appearing in the UWL of the contract owner and when i go and see in the worklfow log i see that its lying with WF-BATCH.
I am usng the task 40008003 for accept/adjust task for rejection in the acceptance by the contact person section in /sapsrm/wf_process for my custom schema .
It works for PO but surprisingly its not working for contract . I am not able to figure out anything from SLG1 either. I tried debugging with WF-BATCH but could not come to a conclusion. Please any suggestion.
regards
Anand
Edited by: Santosh Chitturu on Sep 22, 2011 8:02 PM
Edited by: Santosh Chitturu on Sep 22, 2011 8:03 PM

Hi Santosh,
I am facing the same issue in my contract workflow. Kindly help me with your resolution. Tried searching SAP notes but nothing is there.
Thanks
Shankar

Similar Messages

Contract Release Value is not updated with Confirmation or Invoice value

The release value for a contract in SRM EBP shows the value of purchase orders created using that contract. It does not take into account confirmation and/or invoice values.
For example I create a PO for 10 items at £100/each using Contract ABC. The total value of the PO is £1000 and the release value contract ABC would be £1000. If I then only confirm and invoice 5 items (£500) for the PO, the release value of contract ABC stays at £1000 even though I would expect it to update to £500
Therefore the release value of the contract could be incorrectly overstated if purchase orders are created against the contract but not actually invoiced/confirmed for their total value.
Please could you confirm the correct functionality and how I could find out the the true invoice value of purchases made using a contract?

Hi
Which SRM and R/3 versions are you using ?
Meanwhile, please go through the following SAP OSS Notes, which will help in this case ->
Note 622045 Net value in release overview of contract is incorrect
Note 493519 Release quantities are not updated
Note 1108322 BBP_CONTRACT_CHECK wrong calculation of values
Note 1102886 Contracts: Lesser Field length for Target Value
Note 1082548 Check of Released quantity and released value in contract
Note 656181 Release synchronization of releases on services
Note 874920 Currency not allowed to be changed for a 'Released' Contract
Note 703771 Resetting release values during purchase order item deletion
Note 643823 BLAREL: Incorrect values in service segment
Note 519879 BBP_CTR_MAIN: No message when values in Contract are reset
Note 520734 Target value not converted if currency is changed
Note 528897 Documents not displayed in contract release order overview
Note 430373 BBP_CON_MNT: No releases available
Note 491993 Entry of contracts with target values
Note 437491 Purchase contract: Incorrect update of the call-off values
Note 406799 BBP_CON_MNT: Fields after contract release ready for input
Note 398168 Purchase contract: Target value is not changed
Do let me know.
Regards
- Atul

I have a nokia E61 on an orange monthly contract caller ID is not working

Hello all, Yes my trusty old Nokia E61 no longer shows caller ID. When I call a number in my contacts I get the name of the person I am callingText messages have the sender ID attachedIf I put the sim in another phone I get caller IDIf I put the sim from another phone in the E61 I get caller ID SO, today I went and did a sim swapI waited till my current sim lost signal (about 2 hours)I inserted the new simWhen I got home I called my Nokia E61 from my wifes EE iphone and our land line, both gave caller IDI then read and deleted the sms that orange sent me to update the sim and restarted the phone Guess what, no caller ID I called Orange support, they told me everyone on orange has this problem (yeah right I believe that) I am going to do another sim swap tomorrow and I will put the new sim in another phone till I get the message then I will put the new sim in my nokia which should sort it out. Anyone got any amazing ideads about this or can anyone verify Oranges cheesy explanation for the fault??

Hello Karen, Thank you for checking it for me. I did a sim swap on Sunday and it worked fine. I turned off my phone overnight and when I turned it back on in the morning, no caller ID.This fault is obviously something to do with the SIM update texts received after a new SIM is inserted. I put out a question on twitter asking for other orange users to contact me who are suffering this (as I have been told 95% of estate affected) problem. No-one else has it! I have talked to customer services about transferring my contract to an EE sim (contract expires in December) but was told no, I have to pay £170 to get out of the contract. My issue is this; I work in the property business, I have several properties I own and manage. When I miss a call now I get no ID from the caller or call back number.This is costing me money and stress as I keep getting upset tenants having a go at me for 'ignoring' them. I have aslo missed important calls from my financier! I am in a contract witnh Orange where I pay a fee for a service. That service is not being provided to an adequate standard and I will need compensation from Orange for my loss if I cannot transfer to an EE account. I do not want another contract, I do not want a new handset, I just want my basic service so I can conduct my business in a proper manner. Can you send me a link to the orange service contract please. Regards M Butler

Contract release Rejection

Dear all,
   I want to Reject (not cancelled) the contract release if there any way to reject the contract
   release from any user in workflow kindly reply it.
   Regards,
   Ali

We are using ECC 6.0 system.
Problem is that in the standard system there is no Rejection option for outline contract agreement (ME35K)
For Example:
If contract is send for release to an approver, he can only approve it.approver can also cancel his release if he had released the contract earlier.
we are looking for a functionality that the approver can perform Rejection on a Contract, like Purchase Order (ME29n) and Purchase Requisition (ME54n), an approver can perform rejection.

After Restore Got Voicemail Without Service Contract

My old iPhone 3G doesn't have a service contract and in preparation of giving it to a friend, I erased all content and settings, then set it up as a new iPhone. Prior to doing this I was using it on wifi with various apps. My friend plans on doing the same and not get a service contract. After the restore though, I noticed the native phone app showed 3 voicemails. Prior to the restore it was a solid red dot, because of the no service contract. Is there a way to remove this so it doesn't show any voicemail? I am not sure why it does anyway.

Not being under contract does not mean someone doesn't have service. After a contract has expired, service will be on a month to month basis without being under contract and can be cancelled at any time without a penalty.
Are you still an AT&T subscriber with service with another phone?
Erasing all content and settings on the iPhone is all that is needed in this situation. Setting the iPhone up as a new iPhone with iTunes after doing so means activating the iPhone with iTunes with AT&T, or did you restore the iPhone with iTunes as a new iPhone or not from your iPhone's backup after erasing all content and settings on the iPhone? If the iPhone is not activated with AT&T, you shouldn't have any visual voicemail messages. AFAIK, the only way visual voicemail messages can be downloaded to the iPhone from AT&T's server is with an iPhone that is activated with AT&T.

Contract Release value is not updated with Limit item value

We have SRM 4.0 with ECS scenario.
Contract are created in SRM and replicated to ERP.
If we create PO with Service line and Limit line using contract in both of these line items, contract Release value is getting updated only with Service line item value.
But the contract Total value is the addition of Service and Limit value of PO.
Why Contract Release value is not getting updated with Limit item value. Please help as early as possible.

Hi Sandeep
Yes. there are various reasons .upon your contract incorrect status and linkage not establised / or more attachment in SRM GOA.
what type of contract are you using? GOA or CCTR
If it is GOA - which version of SRM and service pack ?are you in ?
If it is a GOA , BLAREL idoc might failed to post the release value in the SRM .
How contracts are created material / mat group ?
to fix or understand the issue, you need to recreate the issue.
what is the ERROR in BLAREL in SRM idoc monitoring ?

PO number not copied from Contract to Sales order

Hi Gurus,
when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
also the PO item is not copying from contract to sales orde.
Could u tell me the reason.
Cheers,
Sumith

Hi Sumith,
I'm not sure though but try this one this might jus help.
Go to VTAA,
select the target & Source doc type.
Go to header and check the COMPLETE REFERENCE CHECK BOX,
Which says it copies the whole of the reference doc from the
source doc to the target doc.
I jus hope this will sole your problem.
Cheers!!
Nitin

Price not copying from contract to maintenance order in IW31

Hi Gurus,
I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
Thanks in advance!
Best regards,
Karun Kumar

hi
i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
regards
thyagarajan

Net weight of the material is not copying from contract to sales order

net weight of the material is not copying from contract to sales order?
plz help me

Hi,
If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
Please check in the Contract whether the vales derived from Condition records are entered manually.
If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
Please maintain the CONDITION RECORDS and check whether they have copied or not
Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s D
Please check the above settings and let forum know the feedback.
regards,
santosh

Condition type not appearing in contract

Dear All
I made a customised Z condition type.This Z condition type is appearing in PO line item conditions tab but when I am creating contract this same Z condition type is not appeaing in contract line item condition tab.
Please suggest why is it so?
Regards
SK

Hi SK,
Check whether the schema group assigned to vendor master (is the pricing procedure that contains the condition type)
Regards,
Bijoy Kumar

Help on Contract Apporval Rejection

Hi friends,
Please need help on how to configure for Contract Approval Rejection thr workflow.
what will be the status of Contract once rejected by approver?
Thanks in Advance.
Smitha

Hi,
Check this out
Workflow of contract release strategy
Thanks
Diwakar

Long text not apearing on contract

Hi SAP Gurus,
Can anybody please help me with this scenario. The long text appears on the PO but does not appear on contract. When i say long text it refers to the Basic text in the additional data part of the Basic data tab. Whatever text we maintain here, it is appearing on PO but not on contract. Now here i need one more clarification. What about the Purchase order text tab in the material master. Do we need to maintain something here in order to get the long text on contract or how is it? PLease clarify me on this
The configuration looks ok.
Thanks
Anusha

Hi Manish,
I'm getting confused here with the names of texts and the locations that they get copied to. PLease explain me what each type of text does and where does it get copied if we want it to
thanks
Anusha

Could not obtain latest contract from popen(3C): No such process

when i add a scripts in crontab file.in /var/cron/log shows the error
could not obtain latest contract from popen(3C): No such process

I HAVE THE CONFIGURATION OF SOLARIS 10
THE WHOLE CONFIGURATION IS SunOS 5.10 Generic sun4u sparc SUNW,Sun-Fire-V210
ERROR:Re: could not obtain latest contract from popen(3C): No such process
THIS PROBLEM SOLVE WITH YOUR SUGGESTED PATCH

Details: i have 25 dollar but i cant by gem on clash of clansgame when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve

Details:
i have 15 dollar but i cant by gem on clash of clansgame
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problem

You will want to contact iTunes Store Support from expresslane.apple.com or call Apple Care to see whats wrong with your billing information or why its being blocked.

Details: i have 15 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem

Details:
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problem

رائد wrote:
please help me to solve problem
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Contract after rejection is not routed to contract owner

Similar Messages

Maybe you are looking for