Contract data from ECC to MDM
HI all,
We have standard setup to push Contract data to catalog from ECC using MECCM transaction from ECC... and Via PI we use the standard way to FTP the file... we use standard mapping interface in PI - CatalogueUpdateNotification_Out... which in turn pushes the Data from PI to FTP server. Where the MDM picks it and upload it.
Everything works fine.... But I need to understand how the MDM recogize the File and how the PORT and XML schemas upload the FIle into MDM database???
Need to Identify whether it can be modified???
regards,
Prabhu
Hi Prabhu,
You can upload the xsd from PI into MDM. To get the schema go to your message type and click on xsd tab and copy and paste in notepad and save as .xsd and upload. Else you need to create the schema in external tools like altova xml spy or stylus studio etc.
There is option in MDM whether to load that file from the port automatically or manually. If automatic it will load immediate else you need to run manaully the file.
Need to Identify whether it can be modified???
I did not understand this. Do you mean to change something in the file once written from PI. If yes then try to go to MDM console and open the port and load it manually. So the file will be sitting there and you can modify and upload manually through Import Manager. But this is not advisable in production.
If PI is sending a csv or tab delimited file then you dont need to have a schme for that. You can load it manually.
Regards,
---Satish
Similar Messages
-
How to map service contract data from ecc to crm
Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath. -
Hello
would you please let me know how data data flow from ECC-XI-MDM
Thanking youHi
For vendor master use IDOc of type CRemas.
for customer master use idoc OILDEB,
Configuration for sendinf any master data from ECC to XI
1. create RFC destination of type 3 in ECC using SM59 and point to your XI system
2. Create Communication Port for IDoc Processing using Transaction WE21 select the RFC destination created in above step.
3. Create Logical System (LS) for IDoc Receiver System: Transaction BD54
4. Create Partner Profile with Outbound Parameter. Transaction WE20
-Deepak. -
How to reflect the Master data changes from ECC to MDM
Hi Experts,
We need to reflect the master data changes of company code and cost center groups from ECC to MDM.
what methods available and which would be best in performance.
kindly let me know if you need further information for better undrstanding.
Thanks in anticipation
looking forward to hear from you all,
with regards,
Chandhan.SHi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful -
Issue in transfer of data from ECC to APO
Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalithaHi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks. -
Unable to extract the data from ECC 6.0 to PSA
Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanksECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks -
Error while loading data from ECC to BI
Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
ThanksAmar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M -
Hi ,
I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
Regards.Hi vinit ,
I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
Here is my code in ECC program
CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
DESTINATION 'XXX'
IMPORTING
I_REF_GUID =
I_BAPIMODE =
I_PARK =
I_SAVE =
I_TESTRUN =
I_HEADER = I_HEADER ?
IT_ATTACH =
IT_DYN_ATTR =
IT_CONDITIONS =
EXPORTING
E_HEADER = E_HEADER ?
ET_ATTACH =
ET_DYN_ATTR =
ET_CONDITIONS =
TABLES
I_ITEM =
I_PARTNER =
I_LONGTEXT =
I_SDLN =
I_ORGDATA =
I_HCF =
I_ICF =
I_TOL =
I_WEIGHT =
IT_EXCHRATE =
E_ITEM =
E_PARTNER =
E_LONGTEXT =
E_SDLN =
E_ORGDATA =
E_HCF =
E_ICF = -
Master/Transaction data from ECC to APO-BW
Hi All,
Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
Regards,
JoyHi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Hi,
I have fetch to data from ECC custom table to APO and create data, can anyone let me know the procedure.
Thanks in advanceHi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Loading of data from ECC to BW initially takes time
Hi,
I am loading data from ECC to BW System.
But I find that this process initially takes some time to start say for 15 minutes or so.
I have no clue as to why this is happening.
Could anyone help me out here.
Regards,
Sushanth HulkodNo, I found that there were no BGD's available in SM50 Transaction.
But initially, the loading of data does not start for some time.
After that all the data is loaded at once.
I am uanble to understand this weird behaviour.
- Sushanth Hulkod -
Transaction data from ECC to APO DP
Dear All,
Can you tell me if i can directly load transaction data directly from ECC to APO BW Infocube.
For example i want to load say sales orders from ECC.
Can i directly load from ECC --> APO BW Infocube --> DP Keyfigures.
Or any staging is required inbetween ECC and APO BW
Thanks
Santhana.Hi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Extraction of data from ECC to 3rd Party systems
Hi All,
I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
Thanks,
SB.Hi SB,
Check the following link
http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
Ranganath. -
Source System Creation in BI to load data from ECC 6.0
Our ECC 6.0 and BI 7.0 is one server. I would like to load data from ECC 6.0 to BI. How to create source system? I have source system for flat file and Data Mart (Myself source system) but don't know how to create source system to laod data from ECC 6.0. Please provide step by step guide.
Thanks.Check here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks...
Shambhu -
BPC:NW - Best practices to load Transaction data from ECC to BW
I have a very basic question for loading GL transaction data into BPC for variety of purposes, would be great if you can point me towards best practices/standard ways of making such interfaces.
1. For Planning
When we are doing the planning for cost center expenses and need to make variance reports against the budgets, what would be the source Infocube/DSO for loading the data from ECC via BW, if the application is -
YTD entry mode:
Periodic entry mode:
What difference it makes to use 0FI_GL_12 data source or using 0FIGL_C10 cube or 0FLGL_O14 or 0FIGL_D40 DSOs.
Based on the data entry mode of planning application, what is the best way to make use of 0balance or debit_credit key figures on the BI side.
2. For consolidation:
Since we need to have trading partner, what are the best practices for loading the actual data from ECC.
What are the typical mappings to be maintained for movement type with flow dimensions.
I have seen multiple threads with different responses but I am looking for the best practices and what scenarios you are using to load such transactions from OLTP system. I will really appreciate if you can provide some functional insight in such scenarios.
Thanks in advance.
-SMFor - planning , please take a look at SAP Extended Financial Planning rapid-deployment solution: G/L Financial Planning module. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is free to licensed customers of SAP BPC. This RDS leverages the 0FIGL_C10 cube mentioned above.
https://service.sap.com/public/rds-epm-planning
For consolidation, please take a look at SAP Financial Close & Disclosure Management rapid-deployment solution. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is also free to licensed customers of SAP BPC.
https://service.sap.com/public/rds-epm-fcdm
Note: You will require an SAP ServiceMarketplace ID (S-ID) to download the underlying SAP RDS content and documentation.
The documentation of RDS will discuss the how/why of best practice integration. You can also contact me direct at [email protected] for consultation.
We are also in the process of rolling out the updated 2015 free training on these two RDS. Please register at this link and you will be sent an invite.
https://www.surveymonkey.com/s/878J92K
If the link is inactive at some point after this post, please contact [email protected]
Maybe you are looking for
-
How to change server in SAP B1 8.8
Dear All, I have a problem in using SAP B1 8.8. I have 2 separated server which is one is contain license server and the other server contain database company. My client doesn't want the company database in one server with license server. In SAP B1 2
-
Re: SA80 Cannot Find DVD-RAM Drive
A client gave it to a backyard tech because the DVD drive wasn't working. Apparently he got it working, and formatted and reinstalled the computer - Thus leaving it without drivers. What's more, he formatted it badly, screwed up the MBR a bit. Anyhow
-
Sync shared calendar with Android
Hello all, I'm hoping someone has found a solution for this: our office is almost exclusively Mac and iOS and we use shared calendars to communicate our work schedule (which changes often). A key person on the team has a Droid and we're trying to fig
-
How can I view/import my photos from the iPod in/to iPhoto? Isn't there a way? Regardzz CV
-
Bluetooth communication with printer
I have just installed a bluetooth adapter (HP bt450) on my HP 7850 Printer. Sometimes when I send a document to the printer, it works and sometimes it doesn't. Sometimes the error message is "printer is out of range", which it definitely isn't. Any i