Contract from srm to SAP R/3

I made a account assigned pr(with cost centre) in SAP R/3, then i transferred it to SRM, and made a bid in SRM, after all I selected one bid and triggered a contract in SRM so that contract gets made in SAP r/3.
Now the contract automatically picks account assignment as "U" while account assignment is mandatory for that material so it does not make a contract and gives error that account assignemnt mandatory for that material.
Basically account assignemnt data is not being picked up when i transfer pr feom R/3 to SRM.
So when I make a contract it also does not get transferred from SRM to R/3.
Pls. help and guide.
Thanks
9881240969

Hi Nacho.
Sorry the bad news, but account is not transfers from SRM to ECC or from ECC to SRM in contracts.
The Contracts goes between systems via IDOCs (BLAREL)
As you can see in transaction WE60, IDOC BLAREL02 has not account data.
Regards.
Raúl.

Similar Messages

  • Searching SAP contracts from SRM 4.0

    Hi,
        Does any one know what configuration needs to be in place if i want to search SAP contracts from SRM 4.0 in classical scenario. We dont want to copy R/3 contracts in SRM.
    Would appericiate your response.
    Regards,
    MD

    Hello ,
    In classic scenerio the Backend Contracts will be available in the SOurce of Supply Tab in the Shipping cart screen.
    System will propose the Contarcts from BE based on the Product Category in Shopping cart item.
    Cheers,
    Sid

  • Creation of backend contract from SRM system?

    Dear Experts,
    I am bit confused with the scenario of creation of backend contract from SAP SRM system? It says in few cases, based on the BAdi 'BBP_DETERMINE_Logsys', the system creates a backned contract directly in a backend ERP system. Why do we need when we have central contract?
    We can meet the same requirement through central contract where we will authorize only purchasing organizations of a backend system and block the contract for local sourcing in SRM?
    Secondly, How to find a contract / scheduling agreement created in a backend system when a central contract is distributed to the backend system?
    Thanks and regards,
    Ranjan

    Hello Ranjan
    question on contracts?
    Note 1476307 - Importing parameter not filled in BADI BBP_DETERMINE_LOGSYS
    in classic scenario , The Business wanted to create a contract from cockpit or via BID
    this BADI helps
    Symptom
    You have implemented BAdi BBP_DETERMINE_LOGSYS to control the system in which contract is created in following scenarios:
    1. Creation of contract from an accepted quote / bid.
    2. Creation of contract from a requisition in SOCO.
    In the method IF_EX_BBP_DETERMINE_LOGSYS~CONTRACT_LOGSYS_DETERMINE of the BAdi implementation, importing parameter IT_ORG doesnot have any values.
    Other terms
    Backend contract
    Reason and Prerequisites
    some business wants to create a backend contract from SRM . see some Dinesh Powale / Claude  threads for more understanding.
    Muthu

  • PI setting for transferring Contract from SRM to ECC - Classic scenario

    Dear Experts
    SRM 702
    ECC 6.0 EHP6
    SRM - Classic scenario
    Need to understand PI setting for transferring Contract from SRM to ECC, as currently document Central Contract document getting created in SRM, but it is not getting transfer to ECC
    No XML message getting triggered in ECC systm as well
    can you help me in this
    if any additional information needed, pls revert
    Regards
    Prashant K

    Fully approve and release the contract. It will trigger the XML Message.
    Go to https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_… and download the configuration guide & check the PI setting and required Software Components in PI.

  • SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

    Hi,
    We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
    We have already configured XI content for MDM Catalog.
    We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
    But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
    Can someone pls help and tell me why is that happening??
    Thanks in advance.
    Regards,
    Jasmeet

    Hi Mausam,
    yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
    We have the Pre delivered content for XI from which we have set up the Interfaces etc.
    This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
    So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
    Regards,
    Jasmeet

  • Handling lease PO from SRM to SAP

    Hi SRM gurus,
    I am in a fix can someone please help me out in sharing their expert Documentation on standard industry practice about how to do lease PO from SRM to SAP. appriciate a quick response on the same.
    You can send the required documentation to the following mail ID
    [email protected]
    Thanks in Advance.

    Leasing with SRM
    /people/mustameerahmed.khan/blog/2009/12/31/leasing-with-srm
    by
    Mustameer Ahmed Khan
    br
    Muthu

  • Transferring contract from SRM to R/3

    When I trigger a contract from SRM to R/3, then
    1) If there is no material code in BID then, while transferring account assignment gets changed from K(cost centre) to U (unknown).
    2) If there is material code in BID then account assignment category comes as blank henceforth contract does not get made and throw an error.
    I am tranferring data by IDOC.
    While if I make a PO from this bid then it works perfectly fine.
    Pls. guide. Thanks
    Parag
    09881240969

    Rajesh,
               We are facing the same problem
    Is your issue resolved, can send us the solution.
    Thanks
    Sanjay

  • Product Contract and supplier data transfer from SRM to SAP XI

    Dear MDM Guru's
    I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials  or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
    Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
    Please help.
    Regards
    Jacob

    HI Jacob,
    I believe below documents will give you the information which you are looking.
    [SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
    [SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
    [SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
    Please revert if you still get any question, after going though these documents..
    - Shiv

  • Can't Create Contract From RFx Response (SAP SRM 7.0)

    Dear Expert,
    Could you help me,
    i have create rfx, response the rfx and accepted the rfx response.
    After i have accepted that RFx, i would like to make a contract from this RFx response. Via menu Create Contract.
    But this error is show up.
    Error application is coming up.
    20111020
    RHESAS
    093450
    sapgsd
    http://sapgsd.garuda-indonesia.com:8011/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
    OBJECTS_OBJREF_NOT_ASSIGNED
    Access via 'NULL' object reference not possible.
    Method: PST95E57RQRHC49FBLT5QTJBJT9Z of program /1BCWDY/NC67WCWB50U4IGZ40GZ1==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/NC67WCWB50U4IGZ40GZ1==CP
    Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
    Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
    Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    http://sapgsd.garuda-indonesia.com:8011/sap/bc/webdynpro/sapsrm/wda_l_fpm
    Do you have any idea to solve this issue?
    (we are activate Procurement for Public Sector Functions )
    Regards,
    Rhesa Syahrial

    Hi All,
    I have solved this issue.
    I missed the configuration in Partner Grouping schema ID.
    Regards,
    Rhesa Syahrial

  • Attachments from SRM to SAP R/3

    Hi,
    We are currently setting up the DMS for document attachments from SRM5.0 to the SAP R/3 backend, and have followed the customising steps for both SAP R/3 and SRM accordingly.
    In the process, we attach documents to the SC. The follow-on document created is a PR. The problem that we face is when we view the PR from ME53N, and select the ‘Services for Object’ – the attachments link is ‘greyed’.
    However, in transaction CV04N, we can see the attachment/s via the object link (referencing the respective PR and item no.)
    Also, if one creates a PR directly in the SAP backend, and then create an attachment via the ‘Services for Object’, you can see the attachments and the link is not ‘greyed’ out. This attachment can also be viewed via CV04N
    I have been through many of the links on SDN, and can not find any possible solution that describes this problem. Is there any additional customising that is required for this link to be visible and not greyed out when viewing PR’s created from SRM?
    Anyone experienced the same issue? If so, how did you resolve it?
    Many thanks and best regards,
    Alan Brouard

    Hi Nacho.
    Sorry the bad news, but account is not transfers from SRM to ECC or from ECC to SRM in contracts.
    The Contracts goes between systems via IDOCs (BLAREL)
    As you can see in transaction WE60, IDOC BLAREL02 has not account data.
    Regards.
    Raúl.

  • XPath error while transferring products and contracts from SRM to SRM MDM 2

    Hi experts,
    I am getting the following error in SXMB_MONI (in XI) when I transferred contracts or products from SRM to SRM MDM. I have maintained xPath entries based on the SAP delivered note but still getting this error. Please help.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Interface Determination
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem when processing the XPath expression /nr1:CatalogTransmission/Catalog/CatalogContent/ItemList//Item[PropertyValuationList/PropertyValuation/PropertyReference[text()</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    thanks,
    Surya

    Hi
    Are u using any FCC parameters for file adapter?
    If so don't do that. I tried with the same. You have to go with xml only. Otherwise there is some package related to that. you need to download.
    Go to this note for more details.
    SAP Note Number: 962165
    Regards,
    Pavani

  • Transfer additional data together with a contract from srm to srm-mdm

    Hi All,
    I have a requirement to transfer additional data together with a contract, such as price scales, discounts, and discount scales
    If the contract has condition like
    scale Discount
    0-10 20%
    20-30 30%
    from SRM to SRM MDM Catalog.
    As a standard practice, we use report SRMMDM_CTR_TRANSFER in SRM to send the standard Contracts from SAP SRM system to the SRM-MDM Catalog repository via SAP XI.
    But to transfer additional data , we have to use BBP_SAPXML1_OUT_BADI in SRM 7.0.
    If any body worked on the same, please let me know the step by step procedure how to implement BBP_SAPXML1_OUT_BADI.
    Regards,
    Venkat

    Hi Venkat,
       You can have a look at the Note - 1296876
    It gives the step - by -step procedure on what how to Enhance Contract Data Transfer.
    For this, you may have to do the implementation in BADI BBP_SAPXML1_OUT_BADI
    Change the XI mappings and the MDM Import manager mappings.
    Hope this helps.
    Regard,
    Sherfu

  • How to transfer Vendor from SRM  to SAP R/3

    Hi...
    How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system
    regds
    Kumar

    Hello Kumar,
    Please find the SAP documentation:
    http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
    I have not tested the functionality but as per documentation Under Business Partner Monitor transaction, you can synchronize SRM vendors with ECC vendors directly using a pushbutton Transfer Change to Backend.
    Other useful threads.
    Tranfer vendor data from SRM to ERP (R3 / ECC)
    Vendor data transfer from SRM to R/3.
    Hope this helps.
    Thanks
    Ashutosh

  • Work Items are not pulled from SRM into SAP Fiori

    Hi Friends,
    We are using Application controlled workflow in SAP SRM. As Fiori won't support application controlled workflow, I have followed the guide to configure the task as custom workflow in scenario definition. But its not pulling the work item from SRM in Fiori tile. My tile shows 0.
    When I  click on the same to go in, I am getting the below error.
    A problem occurred while reading the data
    Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition. 
    Tags edited by: Michael Appleby

    Hi Sasi,
    It would not be possible to use application controlled workflow with SAP Fiori approve shopping cart app. Please refer note 1962663 for more details on SAP Fiori approve shopping cart app.
    Regards,
    Amrutha

  • Distributing Central Contract from SRM to ECC

    Hi,
    We are using SRM 7.0 with ECC 6.0 in backend (no EHP). We're setting up a central contract with IDOCs. From what I read we have made the configuration:
    in SRM:
    - Assign attribute CT_PROC_TY = CCTR
    - Connfigure new condition type PB00 which is the same with ECC price for contract
    - activate the BADI BBP_DETERMINE_LOGSYS and coding it so for contract it will always go to backend (in method CONTRACT_LOGSYS_DETERMINE)
    - I have activated BADI BBP_CTR_BE_CREATE but writing no code, as there no need for me to do mapping
    in ECC:
    - Activate inbound IDOC type BLAORD and COND_A and assign it to the logical system of SRM
    Then I create the contract in SRM. but:
    1. When creating contract, in item overview, i cannot tick 'distribution' indicator. Not sure what is the function
    2. In item detail, tab distribution, I cannot put create release-purchasing org. Even when using search help it is not giving any value
    Actually dont really understand the usefull of the indicator above, so I let it be empty, then I release the contract
    The contract then not appear in ECC. I have checked SMQ1/SMQ2 nothing. Even in WE05 in ECC nothing. The only thing I see is in SLG1 where I see error triggered by user WF-BATCH with message "No recipient found"
    Do i miss something in here? Any help will be very appreciated.
    Josh

    Hi Josh,
    Central contract is only possible in SRM 7.0 with ECC 6.0 EHP 4. You can use local contracts or GOA.
    Regards.

Maybe you are looking for