Contract getting into HELD status even after clicking Release button.

Hi Experts,
I have a query regarding Contracts. We have a contract and trying to extend the validity date. Once "Release" button is clicked the Contract is getting into "HELD" status which is incorrect. Correct status should be "Released" status.
We have not implemented any approval workflow for contracts. Please can anyone provide any solution or pointers to resolve this issue.
We are on SRM 5.0, ECS.
Thanks
RB
Edited by: Rajeshree Bhatiya on Jan 24, 2012 4:03 PM

Hi,
Go to the held contract ,click on change button and then click the check button to see any errors are there.
if there are any errors it will be held position
just check this
G.Ganesh Kumar

Similar Messages

Can we remain in the same state even after clicking submit button?

Hello All,
Can we remain in the same stage even after clicking submit button? Also it should remain in the same stage only when certain conditions are met. For eg:
Condition : In Stage1, CustomFieldA default value is 'No'. To pass from Stage1 to Stage2 the CustomFieldA value should be made to yes.
Scenario 1 : CustomFieldA value is 'No', and I click on Submit .
Expected Result : should remain in the same stage
Is above result achievable in PS 2013? I am creating workflow in Visual Studio 2012, so can I handle this in the workflow?
Please help.

The above answer was proved wrong, so please follow this link to get the answer.
http://social.msdn.microsoft.com/Forums/en-US/8c75d74d-1ea6-4273-96cd-e70f5a5688fc/how-to-remain-in-the-same-stage-even-after-clicking-submit-button?forum=project2010custprog

I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

Launch Safari with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet.
(116847)

My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer

My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer..please help!!!

Try recovery mode agian.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I still get plug in failure even after uninstall and reinstalled adobe flash to my mac os x 10.7.5 (4 bit) with flash 16.0.0.235 how do I get this fixed??? HELP

I still get plug in failure even after uninstall and reinstalled adobe flash to my mac os x 10.7.5 (4 bit) with flash 16.0.0.235 how do I get this fixed??? HELP

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new A

I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new APp. It can be opened, but I want the APP to be on her iPhone screen as well as on mine. Help, please.

Is the app downloaded on her phone also?

When starting Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message.

When starting up Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message?
The error message is: what happened: Type Error: Components. classes ['@mozilla.org/extensions/manager;1'] is undefined.
It appears all the time already from the beginning after installing Firefox 4.

Thanks a lot. The Ask toolbar created this problem. Another problem is: When searching on the web via Google, normally it is possible to type a few letters and then look what appears and then click on the wanted word(s). A number of word(s) ineed do appear, however it is not possible to select any of them as ws possible as mentioned in olders versions.

HT201269 I have lost all my contact details on my iphone 4s and I cant get them back even after hitting restore button.

I have lost all my contact details on my iphone 4s and I cant get them back even after hitting restore button.

This might be because that your game update or other software automatic update killed your contacts. You should make a frequency and regular backup for your iPhone so that all the data could be renewed to your backup data. Whenever you lost iPhone data, you have a choice to restore from iTunes. That is easy and free.
However, this is not the end of the world if you don't have any backup of your iPhone contacts, you can recover contacts with iPhone data recovery software, but that need you to pay for it. So making a backup is a good habit. Do you know how to use iPhone data recovery software to recover iPhone contacts without backup? If not, you can search in YouTube to get step-by-step guide to recover iPhone contacts from iPhone without backup. This is such an example: How to Recover iPhone Contacts - Step-by-step Guide.

I cannot get into my mobileme account after logging in.

after I log into mobileme it just spins saying "Loading mail" and nothing happens. I want to make the move to icloud.
I still am running on snow leopard, is this NOT working for me because I'm not running on Lion? is anyone else
having trouble getting into their mobileme account after logging in?

I am having exactly the same problem, but I have all te latest software including lion.
fratco

Why does itunes get locked with last update after clicking on search button ?

Why does itunes get locked with last update after clicking on search button ?

Why does itunes get locked with last update after clicking on search button ?

HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
*To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
*The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
*I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
Much Respect
Lammo

HT5361 I cannot open my mail program even after clicking on the icon.

I cannot open my mail program even after clicking on the icon.

Mail did launch. Now I'm not receiving new mail.
I may have forgotten my password.

Hi all, how to dubug an application after clicking ok button on popup

Hi all, how to dubug an application after clicking ok button on popup, pcan anyone give me the porcedure
Regards,
Sre

Copy the below text into a notepad file and save.
[FUNCTION]
Command=/H
Title=Debugger
Type=SystemCommand
Now when you get a popup and want to debug from the same, drag & drop the saved file on to the popup window and debug starts right after the next user-command.

To Disble the Field in Table Control after clicking Save button

Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.

hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      fl = 1.
      GET CURSOR LINE lin.
ENDCASE.
ENDMODULE.                 " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
    IF tab1-current_line = lin AND fl = 1.
      screen-input = 0.
    ELSEIF tab1-current_line < lin.
      screen-input = 0.
    ELSE.
      screen-input = 1.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
    DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE.                    "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM

Contract getting into HELD status even after clicking Release button.

Similar Messages

Maybe you are looking for