Contract in SRM not Transferred to ERP

Hi All;
We are using SRM 7 classic scenarion
I created contract in SRM then released it but it did get transferred to the backend.
I checked SMQ1 and found "Transaction recorded"
I checked also in BBP_PD and found "Distribution incorrect"
It was working fine before.
Please advise what to do.
Thanks

Thanks for your replies;
We are using  IDOC technology , I used to check in WE05 BLAORD if there is any erro. but now i am not finding any IDOC in WE05, BD87.
I checked in SLG1 an found "Error
Error: Recipient not found
The error ocurred by processing event RELEASED_NEWLY with GUID 76C5A64DE6B03816E10000000A010E29 and object_id= 4605000167
What this error means?
Our production system has been copied recently to as created QA system. In SRM QA, i copied and existing contract, which got transferred to ERP sometime back  with the same vendor but still it did not get transferred and i got the above error.
Your help is highly appreciated.

Similar Messages

  • Contracts tolerances are not transfering to SRM SC PO

    Hi SRM Expects ,
    contract tolerances not transfering to SRM SC PO .
    We have created a SC based on the contract with  Product category and Supplier , when SC is orderd and PO is created , i can see Contract number in item tab , but  tolerances are not coming from contract in to the  SRM PO.
    contract allocated already before SC was sent for approval. The PO claims, when looking on item detail, it is connected to contract .. But no tolerance
    limits have been transferred from contract to the PO.
    Reagrds,
    Krishna.

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • PO created in SRM not showing in ERP

    Dear All;
    We are using SRM7, classic scenario.
    The buyer converted a SC to PO then deleted it in ERP.
    The SC appeared again in SoCo
    He created another PO but  it did not get transfeered to ERP.
    In Related document of the SC, it shows the Deleted PO with status Deleted but it did not show the new one.
    The SC is NOT shoiwng in SoCo anymore
    In BBP_PD (document display) I can see the new PO number.
    My questions:
    1. How to update the staus of the SC?
    2.How to transfer the PO to the backend 
    for your information, i executed BBP_GET_STATUS_2 but still not updated. I also checked WE05 (IDoc)
    Thanks

    Check the Log in RZ20 for PO.

  • Workflow notifications of AP Invoice approval are not transferring.

    Workflow notifications of AP Invoice approval are not transferring in ERP 11i. The voucher remains in the INITIATED status for long and approval notification is
    not reaching the approvers login for approval.
    Regards

    Hi,
    Using the Sysadmin responsibility, please submit "Workflow Background Process" with the below parameters and see if it helps:
    Process Deferred: Y
    Process Timeout: Y
    Please also see the following notes;
    How to Manually Process the Events from Workflow Queues When The Deferred Agent Listener Won't Start [ID 953103.1]
    Workflow Background Process Does Not Progress Shipped Lines: Stuck in Fulfill - Deferred [ID 804133.1]
    Hope this helps!
    Best Regards

  • SRM - condition types of central contract not copied to ERP (CentContract)

    Hi,
    When I add several condition types to a contract in SRM (updating). After releasing the condition types are not updated in the contract in ERP.
    How can I resolve this. Is there an OSS note?
    Regards,
    Alexander

    condition types are copied from SRM to ECC

  • POR not transfering from SRM to ERP

    Hi Experts,
    We are working with extended classic scenario on SRM 7.0 & ERP EHP4.
    We are creating POR manually in SRM and also recieving POR from SUS system.
    When we accept the POR it is not updating the ERP.
    We have enabled the PI scenario for transfering POR from SRM to ERP by using the Proxy and IDOC(ORDRSP) but the XML is not generated when the POR is accepted.
    Can any one help me how to transfer the POR created in SRM to ERP.
    Is there any way we can generate XML message of POR with status Accepted.
    Regards,
    B.N.Karthikeyan

    Hi,
    I have tried this define event option.
    Still XML not generated for POR.
    Regards,
    B.N.Karthikeyan

  • PI setting for transferring Contract from SRM to ECC - Classic scenario

    Dear Experts
    SRM 702
    ECC 6.0 EHP6
    SRM - Classic scenario
    Need to understand PI setting for transferring Contract from SRM to ECC, as currently document Central Contract document getting created in SRM, but it is not getting transfer to ECC
    No XML message getting triggered in ECC systm as well
    can you help me in this
    if any additional information needed, pls revert
    Regards
    Prashant K

    Fully approve and release the contract. It will trigger the XML Message.
    Go to https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_… and download the configuration guide & check the PI setting and required Software Components in PI.

  • Contract number not transferred to back-end PO?  Is this an SAP bug?

    System: SRM 4.0 - Classic Scenario
    Problem:
    Iu2019m creating "limit" carts with reference to ECC back-end contracts.  The functionality seems to be available in SRM and I expected it to work in the same way as the "describe requirement" shopping carts (i.e. the contract number added to the shopping cart is transferred to the back-end and the ECC PO is subsequently created with reference to the contract)
    However, for u201CLimitu201D carts, I've added the contract to the shopping cart, but it does not get passed to the follow-on ECC back-end PO.
    These are steps I am following (end-to-end):
    1.     Create contract in ECC (ME31K)
    2.     In SRM, add Vendor and Contract Number/Item to preferred vendor list and Release
    3.     Create u201CLimitu201D shopping cart with relevant material group and vendor
    4.     Search and select contract
    5.     Order and Approve shopping cart as required
    6.     Identify ECC back-end PO number
    7.     Display ECC PO using ME23n, select item and check reference to contract.  **Contract number is blank!**
    If I check table EKPO the Agreement Number field for the PO is blank.  I.e. it has not been transferred from SRM to ECC when the PO is created.
    As I mentioned, the contract is transfered for "describe requirement" carts, but not "limit" carts.
    I have tested this in another system and I have the same problem.  I believe this is a SAP bug.  We have raised an OSS note, but awaiting a reply.
    Has anyone else experience this issue and can provide any guidance?
    Matt

    Hi Matt,
    We have a similar issue. We've implemented SRM 7 in classic scenario with ECC 6.
    A limit shopping cart is created in SRM and assigned contract limits. The shopping is approved and creates a purchase order in the backend.
    1) The contract number is not available in the limits tab on the purchase order. The expectation was that the contract number from the shopping cart shows up here. BAPI_PO_CREATE1 does show that the information is being passed from SRM.
    2) The F4 search for contract in SRM does not retrieve contracts from the backend. The search seems to only look for local contracts.
    I would appreciate your insight on this issue and if you could share any information that SAP provided.
    Thanks,
    Hemanth

  • Transferring contract from SRM to R/3

    When I trigger a contract from SRM to R/3, then
    1) If there is no material code in BID then, while transferring account assignment gets changed from K(cost centre) to U (unknown).
    2) If there is material code in BID then account assignment category comes as blank henceforth contract does not get made and throw an error.
    I am tranferring data by IDOC.
    While if I make a PO from this bid then it works perfectly fine.
    Pls. guide. Thanks
    Parag
    09881240969

    Rajesh,
               We are facing the same problem
    Is your issue resolved, can send us the solution.
    Thanks
    Sanjay

  • SRM shopping cart attachment to SAP not transferring

    Hi SRM Experts,
    I have an issue with document attachment which is not coming to SAP R/3 Backend.
    Scenario 1
    1.Create shopping Cart in SRM system with One attachment,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
    Scenario 2
    1.Create shopping Cart in SRM system with TWO attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
    Scenario 3
    1.Create shopping Cart in SRM system with FOUR attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
    From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
    Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
    Note - I have posted the same issue in DMS thread as well
    Cheers...Gopinath

    Hi Guru's,
    I am using SRM 7.0 and while i create an attachment in shopping cart and try to send it in ECC, the attachment is not reflecting .
    Since we are using the latest version of SRM, we have used BADI BBP_CREATE_BE_RQ_NEW
    (Method IF_EX_BBP_CREATE_BE_RQ_NEW~FILL_RQ_INTERFACE.).
    I have also gone through the below link and tried the implementation :
    http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_RQ_NEW-CreateRequisitionin+backend
    Also, all ECC configuration are in place. However things are not come in place. Only the details are reflected but the attachment is not reflected in ECC.
    If anyone can guide the correct way in SRM BADI along with ECC configuration (just to verify) will be a great help.
    Kind Regards,
    Kunal.

  • SRM shopping cart attachment to SAP not transfering

    Hi DMS Experts,
    I have an issue with document attachment which is not coming to SAP R/3 Backend.
    Scenario 1
    1.Create shopping Cart in SRM system with One attachment,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
    Scenario 2
    1.Create shopping Cart in SRM system with TWO attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
    Scenario 3
    1.Create shopping Cart in SRM system with FOUR attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE  attachments exists and Fourth  attachement document number only exists in the DMS (CV03N - No attachment)
    From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
    Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
    Cheers...Gopinath

    Issue found with enhancement made by us in Class(SRM System). Same has been fixed. now its working, Thanks to all.
    Cheers...Gopi
    Edited by: Gopinath A.R on Mar 11, 2010 9:04 PM

  • Header text in contract not transferring to PO

    Hi,
    I am creating a PO referencing a contract. I maintained header note in contract. Now, when I am creating a PO referencing to the contract the header note in not transferring to the PO.  The F1 help in header note in contract shows if it will not be selected it will not be processed. When I selected and tried to save it the system shows no data changed.
    Is there any configuration setting for this.
    Need your help.
    Thanks

    Hi Gaurav,
    Header Text  should certainly copy from Contract to PO just make sure these settings are available in system.
    Go to OLME -> Purchase Order ->Texts for PO -> Define copying rules for header texts
                 It will show you several header text types
    Select the text id go to text linkage here Source Object contract should be there (with Fix indicator blank or *)
    if not then maintain the same and test again

  • Price is not transferred from materail contract to po

    Dear Experts,
                        When i create a service po , the price is not transferred from material contract to po , for material po it is working fine.In debugging i got to know that it is picking up purchase requisitions package number , and not contracts package number.Can u guys help me out wid dis,my all UAT is pending becoz of this issue
    Reward points for helpful answers
    deepthee

    hi,
    when you create  a service po, the prices from the Contract Service line items will flow down to Service PO when you make service selection in Service PO.
    when you create servcie PO, and you enter item cat 'D', you have the option to select the servcies from your Contract by 'Service Selection' button.
    If you use this, the price from contratc will flow to PO. Otherwise the prices will not flow.
    Regards
    Seema

  • Approval text not transferring to PO approval text for ECS in SRM 5.0

    hello All,
                   Do you know why Approvals texts are not transferring to pO approval text in SRM 5.0?  Is this an standard functionality.  Has anyone tried to solve this problem?  can you please share?
    -thanks
    Shilpa

    Hi Paul / Shilpa,
    Do you mean to say that approval text from Shopping cart is not transferring to P.O ?
    If this is what you meant then checkout this OSS note :
    Note <b>679105</b> - Shopping cart -> local purchase order: approval note
    Hope this makes you more clear.
    Award points for suitable answers.
    Rgds,
    Teja

  • ERS indicator of PO item is not checked for Contract assigned SRM POs.

    Hi Team
    We have SRM PO which is assigned to contract as source of supply and vendor for the contract document is assigned with ERS functionality (Aut. setlement in vendor master) for Invoice settlement.
    Issue faced: When the contract is selected as sources of supply for Shopping cart and ordered as release order in MM (classic deployment) MM PO line ERS flag is not defaulted. Scenario works for normal procurement with vendor assigned Purchase orders.
    Did any one faced similar issue in their landscape.
    Regards
    Prashanth K Saralaya

    I think this  is one of the vendor data synchronisation issue like OA vendor .
    Vendor master team might change some data but in contract it will not be synched automaticaly. we may require action on CONTRACT equivalent to vendor master maintenance.
    if the contract has ERS .It might be available in PO too when you refer contract.
    debate come here like who takes precedence vendor master or contract ?
    However customer may expect this ERS falg has to set in the contract as well as it may replicate the same in po as well.
    for testing manually EDIT via ECC contract and flag ERS.
    muthu

Maybe you are looking for