Contract Item System Status (Most recent system status)

Hello folks,
I am trying to extract Contract Item level System statuses by going through STATUS tab>SYSTEM STATUS area>STATUS ANALYSIS log icon>TRANSACTION ANALYSIS which are available in tables CRM_JSTO,CRM_JEST, and CRM_JCDS. However, I would like to get the most recent status changed. Can any body please help me to find out if there is any timestamp field in any other related table that I can use or any other function module.
Thanks!
Edited by: Shak Shak on Feb 6, 2012 8:27 AM

Hi,
you might already have checked the table CRM_JCDS.
From that table you can retrieve the status history of a particular object. From status history you can identify the latest change based on time stamp.
Thanks,
Rajini Aleti.

Similar Messages

IPhoto won't open after most recent system software update

I have just installed the most recent system software update for iPhoto and now iPhoto will not open. I get an error message - see attached screen shot - and I have tried cmd + alt to get the option to rebuild which just re-opens the error report again. Really need help as can't afford to lose all my photo's!

Some people have fixed that by redownloading the 10.7.4 update and rerunning it.
Others have reinstalled the OS
Regards
TD

How can I permanently delete the default bookmark toolbar items (getting started, most recent, etc.)?

I can't seem to permanently delete the default bookmark toolbar items. They show up frequently on start-up, even after manually deleting them in a previous session. I use 3.6 x_32 on Linux (for Flash) and 4.0 RC 1 x_64 (for non-flash) sharing the same profile.
I use the X-marks extension and I thought that was the cause the problem, but the problem keeps happening even after deleting all of the the default items in each version and then overwriting my x-marks server data with a forced upload both times.
I'm guessing that x-marks will be most people's prime suspect. I just want to make sure that firefox isn't recreating the items as a default behavior.
I know it's a minor annoyance, but I keep my bookmarks toolbar pretty full. Thanks.

Does it still happen if you temporarily disable Xmarks?
Doesn't it work if you hide the Bookmarks Toolbar?
You can check:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Indicate most recently selected item in JList

When a JList is set for multiple item selection,
is there any way to visually indicate to the user
which item has been most recently selected?
I notice that in a JTable, a coloured border
gets painted around the cell most recently
clicked on (this is in addition to any cell
background colouring which may be done). This would
be sufficient in my case for a JList, but I
cannot tell that JList supports this.
Any suggestions?
b.c

Good point. I've just tried the following:
Implement a custom cell renderer. In the method,
getListCellRendererComponent(), when the cell
has focus, add a coloured border to it. If the
cell does not have focus, make the border null.
Works beautifully.
b.c

Transformation inactive after system copy in SCM system

Hi Team,
I am posting this in BW keeping in mind that i am receiving issues in RSA1 transaction in my SCM system after the recent system copy. We did the system copy of SCM system and DTP conversion was also done using program RSBKDTP_BDLS. No errors occurred while the program ran. Now we have handed the system back to users for checking and they have reported an error saying there were some transformations missing in the system while checking the DTP . I went to RSA1 transaction in my SCM system and searched for the DTP and status seems to be in inactive status. I then clicked on change button and an error message mentioning the below appears.
Transformation XXXXXXXXXXXXXXXXXXXXXXXX inactive; action cannot be executed
Message no. RSBK260
Diagnosis
A transformation (XXXXXXXXXXXXXXXXXXXXXXXX) used by the DTP is inactive.
System Response
The action (request processing or DTP maintenance) was terminated.
Procedure
Activate the transformation. It connects the source XXXXXXXX XXXCLNT100 to the target XXXXXXXX.
I checked for the transformation entry in the table RSTRAN and did not find the same. Also i ran the program RSDG_TRFN_ACTIVATE to activate the transformation but nothing happens.
Have anyone came across this type of issue. I need some advise on the same and guide me in case if i am missing something, since i have not worked on this type of issue before.
Thanks for your help in advance.
Rajesh

Hi,
Due to the system copy we always get this issues.
Just ask your basis team to check source system assignments. they can do it.its their activity.
at BW Server, RSA1 -->menu tools--> manage source system, check the source system. same need to have at below we20.
at Tx - WE20, Partner type Ls---> under this you may see your target(SCM) and source system anmes. select source name and rigth side panel partner status need be active A.
At quality syste, activations thru program may not be happen. better to re-transport the dtp from dev system.
Thanks

Smart Playlist for "X Most Recent Albums"?

Hi guys!
I'd love a way to craft a Smart Playlist that would give me X number (say, 5) of the most recently-added albums. I find I'm constantly adding a new album, making an individual playlist for that album, and then syncing it to my iPhone.
I've poked around in the Smart Playlist creator, but I just didn't see a way to do this. Am I too sleep-deprived to spot something obvious?
Thanks!
Huxley

But I think the original post is looking for a smart playlist that'll do this - that'll automatically include the most recently added albums, so when one album is added, the sixth most recent album stops being synced. Yes, he can manually add albums, but that's not what he's after, I think.
That being said - I can't help. I'm browsing right now in this area because I'm once again looking for a good way to "smart sync" Classical music (which is mainly organized by album, or at least by "groups"), and haven't yet found one.
Of course, you can make a smart playlist that is something like "Media Kind is Music", and limit it to 60 items selected by most recently added - that will give you roughly five albums, but it's not quite what you want.

My facebook home page is missing:top news, most recent, app requests, game request,and friends on chat....can anyone help?

After I updated Firefox I started having these issues...my Facebook home page is missing the following items: Top Stories, Most recent, App request, Game request and Friends on chat. Also the posts are all outdated, out of order, and they repeat themselves.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also;
*https://support.mozilla.org/kb/Problems+using+Facebook+in+Firefox

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed u

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

GD80 Status LED and System Suspend problem

Hi everyone.
My hardware:
- MSI P55-GD80
-BIOS AMI v1.4
-Intel Core i7 860
-OCZ 4GB (2x2GB) 1600MHz CL8 Gold Low-Voltage
-Zotac GeForce GTX 275 896MB
- PSU: Corsair TX850W
-HDD : 1- Seagate Barracuda 7200.12 250GB (ST3250318AS); 2 - Seagate Barracuda 7200.10 500GB (ST3500630AS); 3 - Samsung Spinpoint F3 1TB (HD103SJ)
- Debian GNU/Linux "Squeeze", kernel 2.6.32, amd64
I have a problem with LEDs on motherboard. when they are lighting I can't "wake up" pc from S3 state (aka suspend). It just restarts when wake up event appears.
Actually the lighting LEDs are: 1&2 VTT_PHASE; "LED2" , which indicates active PCI-Express 16x port; CPU Phase LED panel (it shows 8) and + - buttons used for overclocking (OC Gene and these buttons are turned off in BIOS)
But the strangest thing is that the LEDs sometimes turns on and off (actually one day they do, in other they don't) when I turn on computer, even when they are disabled in BIOS (Green Power => Motherboard LED Control) [btw. Touch Panel is disabled and it still works ]
I have cleared CMOS , swapped SATA cables and I have checked RAM and PCI-Express connection (sometimes when I reinsert graphic card everything starts to work well, but for a few days the problem appears again. The same goes to SATA cable )
Anyway it looks to me like an error reporting (or something) but there is nothing about that in the manual. (or it's a BIOS bug).
I have been searching about it, but i haven't found anything.
Anyone had this kind of problem?
EDIT: BIOS upgrade from 1.4 to 1.5 didn't help.

Hi ctemp1,
Alert: sc0 Config Reader (Sun Fire High-End
Systems) A Status Domain A - Domain Status is: In
Recovery
But the domain has not been restart.
$ uptime
12:28pm up 52 day(s), 2:41, 6 users, load
average: 2.35, 2.49, 2.66SunMC is forwarding the status detected by your SMS daemons: so uptime probably isn't showing the whole story. Try a SMS command like "showenvironment -d A" and see what's reported.
Also what version of SMS are you running? SunMC has an update available for the new SC hardware, USIV uniboards, and newer versions of SMS that change the SunMC addon from the name "12k-15k" to "High-end Systems":
http://www.sun.com/download/products.xml?id=431df39d
If it looks like there's a mismatch between what SunMC and SMS are reporting, and you're running a newer version of SMS (i.e. 1.5) then you should give that update a try.
Regards,
[email protected]
http://www.HalcyonInc.com

How to view Work process status from Operating System level???

Hi,
How can I check work process status from Operating System in Unix. For example : In Windows, I can see the work process status from SAP MMC in WP Table.
How can I view from Unix?
Appreciate your feedback. Thanks.

Hi,
You can terminate. Please look into the menu given by DPMON carefully. You can kill the process using the k option.
Otherwise you can also kill the process kill -9 <PID of the process>.
Please do not terminate update and ENQ work process. This may lead to data loss. If the condition can not be control by killing some processes and again all the WPs are occupied. I recommend SAP system restart.
Restart will ensure that all necessary roll backs happen and no data loss.
With Regards,
Saurabh

HT1338 How can I upgrade my MacBook Pro from OS X 10.5.8 to most recent Operating System ?

How can I upgrade my MacBook Pro from OS X 10.5.8 to most recent Operating System ?
I just bought a Ipad Air and realized than my MacPro does not support Icloud.

Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Most recent operating system for a 2007 Macbook?

So I have a 2007 Macbook. Model no. A1181. What is the most recent operating system I can put on this bad boy to where I can download newer apps? In need of serious help. I have Snow Leopard, but I don't fancy it. It won't let me run the newest iTunes and Google Chrome or my Microsoft Word.

10.7.5 is the max. You need to call Apple customer service to obtain a download for it.

Set WBS status in Project System from CRM Status

Hi Gurus
I am figuring out a solution for how to influence WBS element status in Project Systems in ECC from the campaign/Marketing plan status in CRM. Has anyone done it before or is there any BADI for it.
Your help is greatly appreciated.
Regards
-MP

Your yourself answered your question.
"Can we create our own list of system status"
"Our own" status creation and maintenance feature within SAP in called "User Status".
Please follow link below to have additional information regarding system status.
link: [http://help.sap.com/saphelp_erp60/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm]

Systems preferences do not respond....after most recent Security Update...

HELP.........systems preferences do not respond....after most recent Security Update...During the most recent Security update download, near the end of the process,clean turned all graining and seemed to freeze. I waited awhile and then turned the computer.
ever since then I can not open up any of my systems preferences, battery level,date and time do not show up on the top of the screen as before.....
I had since gone and successfully downloaded the most recent security update for the Apple site and after a restart still no battery level, systems preferences or date and time....
Any suggestions at this point.
BB
ibook g4 Mac OS X (10.3.9)

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

What is the most recent APPLE system that will run Tiger server?

What is the most recent APPLE system that will run Tiger server?

Hi Steven,
I highly suspect by deduction that since the latest 10.4 Server was 10.4.7, that these would be the latest since they came with 10.4.7 client at least...
Mac Pro - MA356LL/A - MacPro1,1 - A1186 - 2113
Mac Pro - BTO/CTO - MacPro1,1 - A1186 - 2113
But if you have 10.4.0 or 10.4.3 Server then likely A Late 2005 G5 would be the latest.

Contract Item System Status (Most recent system status)

Similar Messages

Maybe you are looking for