Contract net value for Header Statistics is not correct

There is issue with value contract. The net value for Header Statistics is not showing correctly for some contracts. Especially, when we delete the PO line items or reverse all entries (GR and IR) for PO line item.
Contract has one line with account category ‘U’. The target value is 300,000.00 and total quantity released to date is 160,000. The net value for Header Statistics should be 140,000 but it is showing 600,000 which is over (double) the target value and user cannot release any further PO reference to this contract.
Earlier I defined net price for line item 300,000 and I changed net price to zero and execute report RM06ENP0 but it doesn’t work.
Please share your experience and thoughts.
Thanks,
Shah.

Hi Jurgen,
There are few Purchace orders with multiple line items and each line item for Purchase orders referencing the same line and same contract.
There is only one Purchase order has two deleted lines against this contract.
Theses deleted line's net price has changed to zero and there is no PO history.
Contract released order value is correct as there is only one line, but net price is wrong. and user is getting error for target value is excedeed by $nnn when trying to create purchase order.
Thanks,
Shah.

Similar Messages

Contract net value problem

Hi,
I created a material PO for net value 100 eur for a contract
of target VALUE 1000 eur.Now i create a GR for
that PO for 50 EUR.Now i set the delivery completed
indicator,then i can set contract net value gets updated to 50 EUR.
Now i created a service contract and service PO with
same target value and net value
But in the case of service po,i create a service entry sheet for 50 EUR,then contract net value is not getting updated to 50 EUR.
Why it behaves differently for material and service POs?

I have Simulated your issue..
I have Created a Service Contract with Line Item 'D" for 1000 INR.
Later I have raised release Order for 200 INR..
as soon as the Release Order was approved , the Net Value in Contract updated to " 200 INR"..
Still SES is pending for that...
If you want I can send you screen shot...

How to find the original net value for a cancelled sales order

Hi experts,
From VA03 or table VBAP, net value for those cancelled items is always zero. Where to find those cancelled items' original net value?
Thanks a lot.
Yu

Thanks Seshu,
I just tried it as per your suggestion but I found for non-cancelled items konv-kbert is not equal to the net value taken from vbap-netwr. So I wonder if knov-kbert is the right original net value for those cancelled items.
Yu

Invoice created with wrong net values at header & item

Hi Guys
Due to a wrong user exit, system created few invoices with wrong net values at header & item.
Now system does not allow to cancel those billing documents, showing error message - inconsistency in data.
Eg: Billing Header net value is 10000
Billing Item net value is 5000
when I try to cancel this billing document, cancellation document created with header net value as 5000 & item net value also 5000. So, it says original invoice & cancellation invoice having different values. It is not possible to cancel.
Please suggest me how to correct wrong values at original invoice, which are already released to Accounting. Or else, how to cancel those kind of invoices.
Thanks in Advance
Regards
Uma

Hi,
In the original invoice and cancellation invoie is created there is a difference in 5000. It will not allow further cancellation of the invoice because it is already cancelled. I don't know whether there is anyway to reverse the cancellation invoice document.
If it is there then reverse the cancel invoice document and create an invoice correction request document (RK)
Try to replicate the scenario in your test system.
Prase

Error Logging In with live Connect Oauth2: invalid_grant The provided value for the 'redirect_uri' is not valid

Hello,
I've been working with oauthwebsecurity to add a few identity providers to work with for authorization. But for some reason i can't get the Oauth2 protocol to work with windows live. I constantly get this error:
{"error":"invalid_grant","error_description":"The provided value for the 'redirect_uri' is not valid. The value must exactly match the redirect URI used to obtain the authorization code."}
I've checked the redirect_uri i send to the initial login request, and i get an access code back. but when i attempt to request the access token in the callback I get the error above even though the redirect_uri i send in the callback request is the same
as the initial log in request. any help or ideas would be appreciated.
Thx,
Ruud

Hello Ruud,
How are you? I just posted a similar problem, however, I vividly understand the process flow. I believe this is a bad design and your can review my post entitled "Azure
Graph API oAuth 2.0 - redirect_uri required - bad design." People are already starting to experience the problem and this wasn't required in the previous version.
I'd like to know Microsoft's feedback on this, particularly someone who has experience / insight into development.

Cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB

I'm getting this message when trying to sync my BB calendar with Outlook 2010 ver 14.0.7153.500 SP2 MSO cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB Is there a fix for this? I'm a new owner of the BB Classic 10 Thank you.

Although this shows for a different version of Link it is the same error and the only info available:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
If you do not have this version upgrading may help:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

My name for my icloud is not correct, how do I get it corrected?

My name for my icloud is not correct, how do I get it corrected?

The address you create when you sign into icloud for the first time, and checked off "mail" in the icloud preferences cannot be changed.
As for setting up an alias, did you setup icloud before Sept 19th? If so, you should receive an email from apple when your @icloud address is officially activated and working. If you have not yet received this email, that would explain why you can't create an alias (there was an article for this, which I can't seem to locate at the moment). I, myself, have just received this email a few days ago.
If you setup your icloud account on/after Sept. 19th and still can't create an alias, I would contact apple and see if there's something wrong with your account.

Net Value in Sales order is not picking up for manual conditions.

Dear Gurus,
I created a new pricing procedure for a sales document, where 2 manual conditions will given in sales order.
But after giving manual conditions, the system is only taking one condition value as net value.
I given Base value description and the step numbers of two manual conditions for Addition.
Please help me I want total of two manual conditions into Net value.

Hi Mahendar ,
Could you please share the solution if your issue has been resolved . Even we are facing the same issue . It would be of a great help
thanks and regards
Kish

Net value of Credit memo must not increase, but accountingdoc must generate

HI All
This is my sales- return process
Sales order has been created for
Material : Ax001:   10 Qty : Total price : 100$   Per unit = 10$
Sales order has been created : for 10 units        (sales doc number:AAAAS)
Billing has been done : 10 units for the value 100$
Accounting documents posted : Credit :100$   Debit accout: 100$
Returns sales order:
This is done with reference to the sales order
Return Sales order has been created with reference to sales order : (sales doc number:AAAAS)
Qty :1 Value of the product =10$   Material: Ax001
A manual condition type is defined to reduce the value of the actual price .. The company is planning to give only 5$ for the return material
Manual condition has been included in the Return saels order Total net Value = 5$ qty = 1
Credit memo has been created : for 5$
Accounting doc: Credit account = 5$ debit account =5$
Issue: The account team wants one more account document to be created for the original value of the product i.e 10$
The net value in the billing document must not increase, but the account document must be created for the value=10$
This is for nullifying the original value of the product from the book of accounts
Solution tried : Manual condition for the original value =10$ keeping it as statically condition type : issue: account doc will not generate if it is statically . CND ref: 100% discount it did not work the net value in the order/billing is increasing
Please let me know how to generate the Accounting document with out increasing the net value.. Using standard SAP. we can create a routine and we can do this .. but we are looking for the Standard SAP solution if any,.....
Thanks for your help in Advance
Chandra

Hi Chandra,
In your scenario create new condition type and update that condition type with accruals at control data 2 section and create relevant access sequence and update the condition type in your return pricing procedure and create new account key one for regular posing and one for accruals and take help from FI /CO to create new two accounts one for regular updates and one for accruals posting ,
in your pricing procedure mark this condition as statistics relevant it will create automatically accountancy document for reference,
Try this and let me know if you have any questions.
Regards
Nishad

Net value in header level (sales order)

hi ,
I am creating a sales oder. I have enterned the material in item level with some quantity but the net value of the order at header level is not updating .. y???? help me please.

HI,
you can use following step to tace it:
1. go to header level "conditions" tab page & go for analysis there. you can get the results where & which value its picking there.
2. if its more then 1 line item at item level system will through the consoilidated vale at the header level not for a single line item.
Try this hope this will help u..Revert me if not solved...
Regards
Deepak

Exclusion item condition value for header condition

Dear All,
I explained my problem with example scenerio.
Sales Order Total Net Amount = 1.500 EUR
SO Item-10 = Advance Payment Sales = 500 EUR >> for first invoice
SO Item-20 = Sales from stock with HAWA material - 1 = 300 EUR >> for second invoice
SO Item-30 = Sales from stock with HAWA material - 2 = 1.200 EUR >> for second invoice
SO Header condition > ZAP1 = Advance payment decrease = - 500 EUR
System divided Advance Payment amount to all items.
Item-10 = - 125 EUR
Item-20 = -   75 EUR
Item-30 = -300 EUR
My request is on below;
Item-10 =      0 EUR
Item-20 = - 100 EUR
Item-30 = - 400 EUR
Is calculation possible with zero value for item-10 ?
Thanks for your helps.
Gulay Celik

Hi Gulay
System cant divide the advance payment to all items ,System can divide the advance payment for one item .
But assign a billing plan at header level and just check , if it works then your requirement can be fulfilled.But generally it is done at item level only
                        Make the following down payment configurations
item category group - 0005
item category - TAO
for this TAO item category a billing plan 01 (milestone billing plan -01) will be assigned and its billing relevance should be I which is order related billing .
billing doc type - FAZ
cancellation billing doc type - FAS
maintain a condition type AZWR which is down payment settlement , it has requirement as 2 and calc type as 48 acct key as ERL
Now when you enter a material in line item 10 and go to item data , you can see the billing plan tab.
now go to billing plan tab and enter the start date and enter the dates on which billing has to be done and then in billing request enter 0009 which is for down payment.once u press enter automatically it all the dates get blocked and billing request by default you get as 1 , that you change it to 4 or 5 . 4 is for down payment at value basis and 5 is for down payment at percentage basis. and beside that there will be a billing type .assign billing doc type as FAZ. to all dates
check the copying requirements are there at VTFA as 20 and for item category TAO copying requirements 23 is maintained or not
now do the cycle OR - LF - FAZ (billing doc type)
Regards
Srinath

Net Value at Header and Item Level

Guyz
I have a header condition say ZFRE, which is manual. when I see total at header level it should be added to other components and show the Net Value. But, it shouldn't appear at item level Net value. With standard settings, ZFRE is being distributed to item level and item total is also considering this condition.
Thanks!
MAM

Hi,
Header conditions apply to all items in the document and are automatically distributed to the items. A header condition can be based on either a percentage or on an absolute amount. If you enter a header condition that is based on a percentage (for example, a discount of 2%) the system automatically applies this percentage to all items in the document. If the header condition is an absolute amount, there are two different ways in which the system can distribute the amount among the items in the document:
The condition value of a header condition is either
distributed proportionally among the items or
the amount entered at header level is duplicated for each item.
You control the distribution of absolute header conditions in the group price field per condition type. In the standard version, condition type HB00 is marked as a header condition and as group condition. Condition type RB00 is only marked as a header condition.
You can try with User Exit USEREXIT_XKOMV_ERGAENZEN_MANU
in RV61AFZB.
Thanks.
Krishna.

Value Contracts - Target value at header

Hello Gurus,
I have a scenario where in we need to provide the target value in the contract for all the items present in the contract.
I am using the value contract type wk1, its only allowing me to provide target value for each material. Is there a way to have the value contract for all the materials in the contract.
I have used assortment module with no use....
Thanks and regards,
Pavan P

Mark teh condition WK00 as header group condition. The target value would be applied for the complete order.

Condition YODI is assigned as NET value but this situation does not wanted.

Dear all,
ın my prıcıng schema,
there ıs a condıton as YODI.
And value of this condition is assigned as net value.
It must not be net value.
How can ı fix it
Regards

Dear ,
Can you please explain us what should YODI be ?
Or can you give us the details of your pricing procedure and your requirement?
Thanks & Regards,
Hegal

Contract net value for Header Statistics is not correct

Similar Messages

Maybe you are looking for