Contract not released

when i trying .. p.o referring contract ...
error
Release orders against contract 4600000064 not possible (contract not released)
how to do that
ali

Hi,
You are creating Release order WRT contract 4600000064 but now contract is not released, so system showing error that not possible create Release order WRT contract. Now release contract in ME35 and then create Release order WRT contract.
Regards,
Biju K

Similar Messages

Release orders against contract 4600000069 not possible (contract not relea

Hai,
I had created a contract and had a release procedure for it.
I had released the contract using ME35k.
When i try to raise a p.o agaist the contract i am getting the error as "Release orders against contract 4600000069 not possible (contract not released)"
What could be the problem and solution for the above error message.
Thanks
Hari.

Bijay Kumar Barik wrote:
Hi,
>
> Error clearly says, contract not released. Release order can be created against contract ,if contract is released.Check=> you may used ME35K to release the contract , but after releasing with releases code, you have not saved the release .Just do use again ME35K to release the contract with release code & save.
>
> NOTE:
> Also check how many levels of release is there for contract and check all levels of release with respective release codes is done or not before creating release order WRT contract.
>
> Regards,
> Biju K
I had released and saved for all the levels i.e for all the release codes.
Still it is behaving the same.
I have not used any ref purchase org as mentioned above in one of replies.

Contract and release order for service: connection and field selection

Hi Experts,
I have some questions about contract and release order (PO against contarct) for services.
A -I want ot know if there is any standar way to oblige the creation of a release order to a contract. I mean i had some users that create a release order w/o reference to the contract and it works fine anyway. The document is a copy of the NB. I cant find the way to reference the 2 purchase document clearly.
B - Using a release order, when copying the item from contract catalogue by clicking the service selection icon, description and net price are correctly copied: the description is not modifiable but the net price can be change by the user. Can some body explain me where to modify this setting? where is the field selection and where in SPRO step by step please,
thanks in advance
Livio

... Nobody is so nice to suggest me any solution?
For the point A probably the only way is user-exit.... but for B i don't have any idea, please let me know
thanks
Livio

Problem with PresentModalViewController and it is not releasing components

Hi ,
Here is the code that takes the user to next screen.
==============
UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:elementController];
[[self navigationController]presentModalViewController:navController aimated:YES];
[elementController release];
[navController release];
================
I have two screens
1)First screen
2)second Screen
In First screen i have a button, when i click on this the above code executes.
then it takes control to second screen
Even if i released the nav Controller and ElementController , the elements like iubaritem,navigation items are not releasing
Please help me out

Cloud programs do not use serial numbers... you log in to your PAID Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Report to Show PR that are not released by release codes

Hello Experts,
I would like to know if there is any report on SAP 6.0 that shows all the purchase requisitions that are not released which shows the releease code (the person's name who has to release the PR). In me55 only could be found by release code, and it is required, I cannot has a report
I think that there is not, but i would like to confirm it.
Thank you in advance,
Best regards

Hello,
1)Go to ME5A t-code & select DYNAMIC SELECTIONS.
2)Select "Purchase Requisition" section and you can make use of parameters like Release Code, Release Indicator , Release Status etc., to fetch the required results.
Hope this helps you in resolving your matter.
Regards
Mahesh

Crystal Report Viewer Not Releasing Oracle Database Connections

I have a very simple vb.net 3.5 web application that uses the Crystal Report viewer 2008 to open a report. My requirements are as follows:
1. Reports are built by another company and provided to us and used in a web environment
2. All reports contain parameter fields
3. The web application must be generic enough that a report can be added to a list and the user simply selects the report and provides database login information. The Crystal report viewer with handle the request for parameter values and prompt the user for their values.
4. All reports connect to an Oracle 10g server.
The above requirements have been meet and we have an extremely simple web application that runs the reports. It is working very well other than the crystal report viewer is not releasing the database connections. This is bad because the credentials are on a per user basis and that same user must login to a different oracle application simultaneously. They are being denied access because the credentials are already in use. We do not have control nor influence over the policies in use on the Oracle server. Ideally we would like to control the Crystal Report viewer so that it closes connections after use.
The web application code is:
Private Sub viewReports_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Not IsPostBack Then
ConfigureCrystalReport()
End If
End Sub
Private Sub ConfigureCrystalReport()
'Load the Crystal Report viewer with a report.
Try
Dim reportPath As String = Server.MapPath(Session("reportname"))
crViewer.ReportSource = reportPath
Catch ex As Exception
Response.Write(Server.MapPath(Session("reportname")) & "
" & ex.Message.ToString & "
" & ex.StackTrace.ToString)
End Try
End Sub
Can anyone shed some light on this topic? Thank you

Hello, Timothy;
By default, having the report in session will hold it open for 20 minutes.
If you create the report as a ReportDocument object you can take it out of session and release it more efficiently. That will release the connection.
    Private Sub ConfigureCrystalReports()
        If (Session("hierarchicalGroupingReport") Is Nothing) Then
            hierarchicalGroupingReport = New ReportDocument()
            hierarchicalGroupingReport.Load(Server.MapPath("Hierarchical Grouping.rpt"))
            Session("hierarchicalGroupingReport") = hierarchicalGroupingReport
        Else
            hierarchicalGroupingReport = CType(Session("hierarchicalGroupingReport"), ReportDocument)
        End If
        myCrystalReportViewer.ReportSource = hierarchicalGroupingReport
    End Sub
In the Form Unload of the Viewer:
            'Take the report out of session
            Session("hierarchicalGroupingReport") = Nothing
            Session.Contents.Remove("hierarchicalGroupingReport")
            'Clean up the ReportDocument object
            hierarchicalGroupingReport.Close
            hierarchicalGroupingReport.Dispose()
            hierarchicalGroupingReport = Nothing
            GC.Collect()
Elaine

Sending an email from Lotus Notes release 5.0.4a

I need to write java code for sending an email from Lotus Notes release 5.0.4a.
Initially, I tried using Lotus Domino Toolkit for java, but the current release, "Lotus Domino ToolKit for Java/Corba release 5.0.8" is not compatible with the notes client/server we are using(5.0.4a).
Now, I am trying to use "Lotus Domino Toolkit 2.1" which supports notes version 5.0.3 and higher, but I couldnot find out how to use it to send email.
Is there are other way in which we can connect to Lotus Notes for sending email. I cannot use SMTP as the Lotus Notes administrator is afraid of security issues so there is no possibility that I can connect to Domino server using java mail API by enabling SMTP on the Domino server.
I would be thankful if somebody can help me to do this.

First off - This is very "off topic"
The Domino SMTP server is not hard to lock down. Any Notes Admin worth his/her salt should know how to do it. Try to persuade them to run the SMTP stuff using name and password authentication only, or restrict access to an IP address range. This is all easy stuff.
Otherwise DIIOP/CORBA is one way to go. If your toolkit jar files don't work with the server then try using the ones on the server. Look in %noteshome%\data\domino\java for the ncso.jar file.
This works for me on an AS/400 java VM to WinNT/Linux Domino servers of various versions.
How to create an email using this method is again not difficult. All you really need is a blank database template. You have to create a document with certain fields in it (all documented) and then save it. That's all there is to it.
Word of warning DIIOP is not very rapid and careless coding can create problems. Ensure that once you have finished a session you make sure you close it else you will have continual connection problems.
Try searching around the domino/notes groups on how to actually do this.
SH

Invoice is not Release MRBR after GR

Hello,
*Usually the vendor sends invoice before the good is receipt. The invoice is paid after the GR.*we want the set up
(1) create purchase order**
(2) MIRO the PO**
(3) IR becomes blocked**
(4) Run MRBR - invoice receipt not released due to GR not having been done.**
(5) Do GR**
(6) Run MRBR automatically as a background job
(7)Check IR freed for payment
(8) Pay the Invoice
(9) GR/IR clearing
When I run MRBR #6 automatically system is not releasing IR for payment. I also tried tolerance DW, BR and PP-50%. May be I am not setting them correctly.
Please advice.
Thank you,

Hi
Can you tell me how did you achieve point (4)?
I also have a similar requirement in MRBR to prevent invoices from getting released if GR is not done.
Thanks

Job not released in the given specified time(Job_close)

Hi,
I need to run a program through job.I created a job using JOB_OPEN
And submitted the job name and job count to the required program
And closed the job using JOB_CLOSE.
My problem is the job getting scheduled but not released/ processed automatically by the specified time I need to release it manually through SM37.
My code.
JOB_OPEN
SUBMIT VIA job_name and job count
l_time = sy-uzeit + 60.
CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = l_jobcount
              jobname              = l_jobname
              SDLSTRTDT            = sy-datum
              SDLSTRTTM            = l_time
              STRTIMMED            = 'X'
            IMPORTING
              job_was_released     = l_released
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              OTHERS               = 8.
After the above code execution SY-SUBRC is 8 and And the L_released is having balnk.If I pass start immediately the the job processed immediately. And the L_released is having X.
Please help me.

If you are trying to set up the job to start at some point in the future - use the SDLSTRTDT and SDLSTRTTM, but do not set the STRTIMMED to 'X'. You can either schedule it for the future (with the sy-datum and sy-uzeit+60 you desginated) or you can set it to begin immediately. But I don't believe you can do both.
In your code example, your are setting both the "start immediately" plus giving it a future date and time.
Give that a try and see if it helps.
-Mark

Function Module not released yet. Has anybody used them in their programs?

Hi
I am trying to use the barcode functionality during a goods movement 101 (using MIGO). As we donu2019t have any control of SAPu2019s barcode functionality thru configuration in MIGO I have developed a custom popup and I am calling this in a BADI implementation MB_MIGO_BADI. Once the user enters the barcode then I call Function module ARCHIV_BARCODE_GLOBAL to save the barcode to the standard tables.
This Function module is not released to the customers and it was last changed on 11/12/2004.
My question is should I be using this Function module in my BADI implementation even though it is not released (does not have a release date) ?. Has anyone of have used a unreleased Function module in your programs?.
Additionally I need this info
I am using ECC 5.0. If anyone of you is using ECC 6.0 or higher can you please check and let me know if this FM ARCHIV_BARCODE_GLOBAL is released or not or when was it last changed.
Please advice me at you earlist
Thanks of your time
SHraj

Hi,
We are not using the above FM. But I can give some Info from ECC 6.0.
In ECC 6.0 the above FM is realeased for customers.
Last changed on:28.12.2004 18:28:16.
You can use the same code in ur Z function module.
Thanks and Regards

Mail.jar is locked when sending a mail using servlet and not releasing

Hi everybody,
The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts.
the problem is not recorded in any logs.
1. Please create a servlet that sends mail
2. Send a mail to any mailid
3. then after the mail is send please try to delete the mail.jar or please deploy the same servlet again with some small changes (for redeploying take place only a few changes is there - please change any strings a little bit)
then try to send mail using this servlet will not send mail becoause it will not redployed correctely.
when i removed Transport.send(msg); from code it works fine. but ??
please help me to recover from this issue. i don't want to turn on tomcat antiJarlocking and antiresourcelocking to true, becaouse this craete many other problems.
please help me to recover from this issue.
Thanks,
Prasad.N

hi friend
I am using advanced version of jdk. i i have used many other jar files like mysqlconnector, logging, commonhttpclient, etc.... the only problem is with mail.jar. that locks are released when its use completed, but the lock holds until tomcat shutdown in mail.jar.
what may be the reason?
Thanks,
Prasad.N

Purchase order yet not released

Hi sap gurus,
i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

Hi Prasad
Its simple prasad ur PO is suject to release strategy (Approval process) so the authorized person has to release the PO through the following process -
Just go to Transaction ME29N or ME28, enter ur PO no.
If u follow ME28 give ur release grp / code enetr PO no. and execute ur PO will be reflected in the list put the cursor there and press Release+Save Iconit will release the PO and then u will able make the GR.
If u follow ME29N then give ur PO no. and go to release tab at the header level and press release icon.
Best regards
Vineet Baweja

OIM 11g using too much memory and not releasing it when shutting down

Hello,
we have a problem with OIM 11g using too much memory (about 5gb) and it's not releasing it at shutdown (4gb still used).
We are using a VM with RedHat Linux 5.6. Originally we had 4gb RAM + 2gb swap file. We installed Admin Server, OAM, OIM and SOA on that machine but quickly realised we couldn't run all 4 programs at once in 6gb. AdminServer could run with 2 other products, but it was a tight fit in memory.
So we increased the RAM to 8gb (still 2gb swap file). But then our problem occured : I start the Admin Server (2.7gb total memory used), then OAM (4.6gb total memory used) and then OIM. After it started the server is now using 9.6gb of memory (~300mb of free memory) ! The problem gets even better : after I shut down everything (OIM, OAM, admin server) the "top" command show that there is still 4gb of memory used even tho nothing else is running on the server ! There is absolutely no other process (other than root stuff) running and no other users connected to the machine. After a reboot, it shows 400mb of memory used. I tried restarting the programs and it did the same thing.
Our intuition is that there might be a memory leak or some bug in OIM that might use up almost all the free memory and it's not releasing it upon shutdown. It might have been there before we increased the memory but have not noticed it since memory was already tight.
Anyone encountered the same problem ? Any idea ? Any suggestion to narrow down the problem ?
Thank you

You can adjust the memory settings for WLS by editing the setSOADomainEnv.sh file that can be found in your /middleware/user_projects/domains/<domain>/bin/ folder. There is an argument called PORT_MEM_ARGS which is used to set your Java memory arguments. This way you can decrease/increase the amount of memory used by each managed server.
I usually type "ps -ef | grep oracle" to see what processes are running by the oracle user. This way the output doesn't get cluttered with root processes.
Sunny Tsang

Blocked sales order is not released from VKM3

Hi
We are using credit management and when a sales order is created with the amount, which is more than credit limit, system is blocking the sales order for delivery. Values are getting updated in FD32 and S066 and S067. When i tried to release the sales order from VKM3, sales order was displayed, but when i selected the release flag and saved it, still the order is not released. Order is having credit limit block in sales order in shipping tab at header level. Why system is not releasing the sales order even it is displayed in VKM3
Please respond
Regards
Srinivas

hi,
check the following steps of assignment you did right or not
1)first check in t- code FD32 U assigned authorization person & each credit limit U shud assign
an authorization person along with credit limit
2) check - conditon records with KRML output is there or not
please read standard SAP config help as a check point doc.....[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
let me know if it is soling your issue
Regards,
Rajeev

Problem with file descriptors not released by JMF

Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.

Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects.

Contract not released

Similar Messages

Maybe you are looking for