Contract not replicated with IDE flag checked

hi all,
I am working on CRM 7.0 . I have done all the neccessary middleware configuration for replication . Now problem is if i turned off the market communication , then contract gets replicated into the ISU system but if market communicationis turned on then contarct is created in CRM bot not replicated into the ISU .
In SMW01 it shows information message " ERP adapter called" and 'No upload to ERP".
Please help me to reolve the issue.
thanks ,
ashish

solved!!!!!!!!!!!!!!!!!1

Similar Messages

SRM 7.0 Contract not replicating to backend system

Hi,
We have created CCTR global outline agreement in SRM 7.0 extended classic scenario. the contract is not replicating into backend. we have maintained necessary message types BLAORD, COND_A in ECC system as inbound parameters for partner type as SRM system.
when i looked rz20, i am seeing the message as "back end data could not be read"
When I executed function module B46B_CTR_TRANSFER I am getting an error, RFC destination could not be found.
please let me know what we are missing.
thanks
vem

"Hi,
I guess your SRM70 connected to backend ECC with EHP4 pack applied. If so, Central contract will not use IDocs instead it works on new eSOA technology where Xi/PI need to be set up to process service calls.
If you are not using EHp 4 pack on your ECC, then SRM70 use IDocs to distribute contracts to backend.
Thanks,
Jagadish
Hi jagdish,
we are on SRM 7.0 and ENHPack 4.0 and as you said its picking up the eSOA route to distribute contracts in backend ECC system.
I would like to know how can we this programmatically ( BADI / Enhancement points) and force system to pick the ALE/IDOC route ???
Do you know any BADI / Enhancement points where we can implement this ???

Data not replicated with partition and dynamic calc

HI
I am using Essbase 11.1.2.1.
I want to use a replicated pratition wetween two Essbase BSO applications.
But in my source application, I have to send an account ACCOUNT (level 1) with several stored members and 1 dynamic calc member with formula. Due to this Dynamic calc account, the partition doesn't work (data are not replicated).
How could I do?
Thanks
Fanny

You're right, dynamic calc account are not issues. I am using them in partition.
But py issue is there :
The source dimension is like this :
TAX (Dynamic Calc)
- 6xxxxxxx
- 6yyyyyyy
- 6zzzzzzz (Dynamic Calc) = formula
The target dimension is like this :
TAX
And so I need to send TAX (Source) to TAX (cible).
I don't think it is possible, but I would like a confirmation before using something else.
I hope it is clearer now.
thanks
Fanny

No contracts are replicated with xMAM 3.0 SR3

Hi,
my xMAM configuration works fine so far. The only thing is that no contracts are replicated. The MAM settings are done for doing so and a test contract for an equipment is also created. Which SyncBO is responsible for contracts in xMAM 3.0 and why doesn't it replicate my new contract?
Regards,
Florian

Hello Florian,
The backend driven replication is listening to backend events to know when a particular object is update/created/deleted, so those event must be set up correctly. Most of the time they are, but you can have a second look.
Once the backend receives the update event, it will create a RFC connection to the middleware and send the key of the updated object. The middleware will put that key in the merep_deltabo table. You should look in that table if your equipment is there.
Once in the merep_deltabo table, the middleware will trigger replication job once in a while (the time you set when registering the rserver driven syncbo). This replication can fail for many reasons and halt the replication. This leaves a bunch of partialy replicated object in table merep_deltabo (look for status P). If you have partialy replicated stuff in there, the replication won't be started again. So this might be your problem.
I hope this works. Check those 3 points and you should be good.
Julien.

Table Constraints not Replicated with Table Published in WebToGo

I have the problem related in metalink Note:167611.1
But i don't understand the next paragraf:
The first time the user goes offline, these DDL statements are executed.
Can any body help me?

Basically when you create a snapshot to include in you mobile application, any constraints are ignored (as are indexes, and column valid values constraints). This means when you synchronise your client device with the mobile server for the first time, the snapshots are created as tables in the oracle lite database (note always created as tables, even if your snapshot is based on a view in the main system). A primary key constraint and a primary key index will also be created.
Within the different mobile application development tools (eg: workbench, packaging wizard, the API definitions, the web.xml file etc.) there is the ability to define DML statements.
These are standard SQL statements (normally DML type statements like create table, create constraint, create index, create view, but can be used for other things like insert into a table) that are run WHEN THE ORACLE LITE DATABASE IS CREATED.
This last bit is important. They are designed to be used for the kind of thing that you run once and then never again (eg: running the same create table statement would fail the second time around).
This means that if you have already created the oracle lite database on a client, and then you need to add in dml statements to set up constraints etc., you will have to delete the database files (odb files) from the client, and sync to re-create the database.
NOTE does not help with constraints, but indexes can be added to the snapshot definitions, and these will cause an update to create them the next time the user synchronises, without the need to drop the client database

Outlook Integration - Appointments Syncing with Reminder Flag Checked

I have been experimenting with the PIM Sync tool and have had no issue taking an appointment from Siebel to Outlook. The main reason we are doing this is so that our sales reps get reminders. That being said the appointments come over and are not checked to have a reminder. Is there a way to set this so it just syncs or some other way people are doing this in outlook?

I would recommend that you submit a enhancement request to CRM On Demand customer care.

BP Address not replicated with the Premise address in IC-Web during move-in

Hello,
When we do the move-in of a BP, the premise address is not maintained as an additional address for BP in CRM and IC Web environments. We see the address being maintained in ECC for the BP, but don't see the same address replicated in CRM and IC Web. Please let me know if we are missing anything.
Thanks
Santosh.

Hi,
Does anyone have any inputs for the above question.
One more thing we observed is that, whenever we process a move-in (move-in date 7 days from processing date), the primary address in the BP still remains the old address (this is expected), and we see the new address in the Address overview with the new address validity from Move-in date. After 7 days, when the service address becomes the primary address for the BP (This happens after the move-in date), the address in the address tab is replaced with the service address and now this changed address is replicated into CRM. At this time we also see 2 addresses in the overview tab in both CRM and ECC.
To test this scenario, we processed a move-in with a prior date (Move-in date equal to current date or prior date), we found that the BP address is replaced with the service (premise address) and we see 2 addresses in address overview tab. Now we see the same being replicated in CRM.
Now my question is, how can we make sure that even if the new address has validity for a post date, CRM will show 2 addresses in address overview tab.
Edited by: Santosh Kolleti on Feb 17, 2011 12:32 AM

Unlocked Iphone 5 not working with Idea cellular in India?

I bought an iphone 5 from Apple store in San Jose California, and used it with an at&t connection for 3 months. I have moved to India last week and am trying to use it with an Idea cellular connection. It gives me following error:
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Can someone tell me what do i have to do here. The phone is not locked to any carrier!!!

Does the purchase receipt lists it as "Unlocked iPhone 5"
If yes, pop in AT&T, Airtel or Aircel sim inside and connect in iTunes to activate. Once activated you can use non-supported carrier's sim (idea or any other)
If no: Get it unlocked from the carrier.
Message was edited.

K7N2 Delta2-LSR - SATA disk does not boot with IDE disk connected

I have K7N2 Delta2-LSR with SATA 160GB drive and CD burner connected as primary master.
When I'm connecting any IDE hard disk, the mainboard detects it corectly, but I'm not able to boot from SATA drive.
I tried to turn off IDE drive detection in BIOS (set [None] instead of [Auto]) and SATA boots!!! And Windows XP and Linux can see both disks!!!
Is it a BUG in BIOS?
Maciek
K7N2 Delta2-LSR (with latest BIOS Sep 18, 2004)
Athlon XP (Barton) 2800+
SATA drive WD 160GB
GF4MX440
FSB333, DDRAM 512MB/400
PSU 350W, works stable with 2 HDs and CDRW.

Strange my board boots fine from SATA with a PATA HDD connected. XP and Linux will see any disks connected to the motherboard and powered up in your system even if disabled in the bios apart from those connected to a separate raid controller which should be enabled. Both these operating systems address the hardware directly once their drivers are loaded so will ignore the settings you have in the bios. This behaviour is normal and not a bios bug. The main boot disk has of course to be enabled in the bios for the boot loader to operate. The boot priority with the new south bridge is PATA first followed by SATA and XP uses this too. To ensure that XP boots from SATA properly the PATA drive must be disconnected during the install process. You also need to ensure that the SATA disk is the only active partition connected to your system. If the PATA disk has been used to boot an operating system previously there may still be an active partition present on the drive. If that is the case removing the active partition should cure the problem but if the present arrangement works for you then fine.

Users mailbox not replicating with outlook

Hey guys,
i have a question which you might be able to assist with, When a user delete his email from his outlook client it doesn't remove from his blackberry handset, in the email options he has set it to hide sent messages and the email reconsilation settings are fine.
i have wiped, reactivated the user, resent the service book, it policy. i don't know what else i can check or try.
can anyone assist, i am running v5 MR2 BES.
Thanks

Do you have, on the BES, reconcile hard deletes? Does it reconcile if the user hits menu > reconcile now?
Reconcile Hard Deletes is under
BlackBerry Solution topology > BlackBerry Domain > Component view > Email > (SERVER)
If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

DC not functioning with FSMO roles

hello every body,
I have 0 DC and 01 ADC lets say that DC and ADC. both were replicating AD and working properly. few days ago the motherboard of my DC failed and we replaced with new one. and obviously NIC card was attached with M.Board which also changed. when i boot up
my DC, i see its not functioning as domain controller as i saw in server manager all FSMO roles are with red cross. i assign the ip address which it hold previous i.e 192.168.0.1. but still FSMO roles are disabled. While my only ADC is working properly with
following errors and warning in AD DS roles.
Warning on ADC:
The remote server which is the owner of a FSMO role is not responding. This server has not replicated with the FSMO role owner recently.
Error on ADC:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 12/15/2014 11:18:07 AM
Event ID: 1863
Task Category: Replication
Level: Error
Keywords: Classic
User: ANONYMOUS LOGON
Computer: KHI-ADC.jehanpakistan.com
Description:
This is the replication status for the following directory partition on this directory server.
Directory partition:
DC=ForestDnsZones,DC=jehanpakistan,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
My DC is working properly as a System.
should i have to do something with my NIC or AD DS roles or i have to transfer FSMOs to ADC. or sieze fsmo roles of DC on ADC.
please help.

Is your DC (role holder) a DNS Server as well? I assume it is, if so open the server role properties and ensure the DNS server role shows the IP in the interface if it does not you may need to uninstall/ re-install the DNS server role (assuming it is a 2008
R2 DC or above... Also did you look at your NIC settings? Did you re-establish the exact same NIC configuration as before?
When the motherboard gets replaced and new NICS are introduced I normally look at the NIC settings and DNS Server roles... That is the Microsoft side of things. On the LAN/ WAN side of things if your network team has port security enabled on the switches
the port may be locked down due to the new MAC Address.

OBI 11g Enterprise Manager (EM Website) does not work with IE8 (v8.0.6)

I am unable to login to the 11g EM website on Windows x64 2003 server. I get the below error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0)
Timestamp: Wed, 6 Oct 2010 10:41:18 UTC
Message: Object doesn't support this property or method
Line: 4354
Char: 1
Code: 0
URI: http://YZU-1:7001/em/afr/partition/ie/default/opt/boot-11.1.1.3.0-0084.js
Any help is appreciated.
Thanks
B

Hi,
OBIEE 11g does not work with IE8.
Check this......What's wrong in OBIEE 11g
Regards,
Srikanth

The crawler could not communicate with the server.

valmiki

Hi,
According to your post, my understanding is that you get an error when communicating to the server.
1. This happens when crawler is not able to connect to the server. Make sure server name is correct and your crawl account should have the Full Read permission on the User Policy at the Web Application level. It should not have any specific
permission on any site collection.
Couple of steps to troubleshoot it:
a. You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
      Ping <servername>
b. You should be able to connect to the server using telnet command
      Telnet< servername> <port number>
https://social.technet.microsoft.com/Forums/en-US/01b6cdda-ca38-46c1-be07-2e89eb91271f/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointsearchprevious
2. Can you browse to the WebApp from the server that is performing the Crawl? The issue is usually the most typical is the LoopBackCheck.
Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.
Quit Registry Editor, and then restart the IISAdmin service.
https://social.technet.microsoft.com/Forums/en-US/f378c45f-fa8b-48f3-88bb-739f3cd27830/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointadminprevious
3. Checked WinProxy to see configured proxy:
       C:\Windows\system32>NetSH WinHTTP Show Proxy
       Run NetSH WinHTTP Reset Proxy
       Restart server and test again.
https://social.technet.microsoft.com/Forums/en-US/1baa6fd5-acc7-4cda-b7cb-7fa86aa8101f/the-crawler-could-not-communicate-with-the-server?forum=sharepointsearchprevious
4. The web.config file of the crawled web application contains an error.
       The target site collection contains a web part error for instance on the default.aspx.
       Also check the solution are not deployed correctly.Central Administration -> Solution Management (Manage Farm Solutions).
https://sharepointsriram.wordpress.com/2011/12/10/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the-firewall-access-is-configured-correctly/
If the issue still exists, you can try to delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
For more information about this similar issue, you can refer to:
http://sharepointroot.com/2012/03/16/sharepoint-search-the-crawler-could-not-communicate-with-the-server/
http://www.sharepointed.com/2013/08/13/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the-firewall-access-is-configured-correctly/
http://www.information-worker.nl/2011/01/11/the-crawler-could-not-communicate-with-the-server/
https://social.technet.microsoft.com/Forums/en-US/0e7ffd07-c584-4767-a2bc-ce3a014255c6/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointadminprevious
Best Regards,
Yumi Fu

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Contract not replicated with IDE flag checked

Similar Messages

Maybe you are looking for