Contract value not updated in open order value of credit management

My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advance

hi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia

Similar Messages

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

Condition type value not update in sales order

Hello Guru's
As per the sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
please find below I have attached the Screen short .
Please give me solution Asap.

Hi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen

Open sales orders value not updating currectly in sales value of CM

Hi SAP experts,
I have an issue some of customers credit exposure value showing worng value.We are using static credit limit check.
customers credit limit RM20000,
open sales order valueRM6,073.77
open delivery=0
open billing =0
open items(recievables)=3,464.39
Credit exposure =9,538.16.
But i have checked in VA05 its showing 13,001.10 value, i have checked all areas didnt get any solution.
I have run the reports RVKRED09 and RVKRED77 , RVKRED88 also no updates in the credit management.
is there any other areas i need to check, advise me.
Regards,
Nooka

The only thing you really need to check is RVKRED88.
It is not the correct procedure to compare the open sales order value with the sum net value of VA05.
In VA05 open documents are displayed indifferent whether they are already part-delivered or not. That's why the open values from the VA05 are not directly comparable with the values in RVKRED77.
As described in OSS note 716141; reports RVKRED88/77 shows the correct value which should be in your system.
If you need to know more let me know.
Thanks,
Gerard

Open order value not updated in F.35

Hi
While using item category Tas ( Third party item ) in Sale order, it is not updated in open order value at F.35.
please give your suggestions. thanks.
Regards,
Tirumal.R

1/ Check your credit control area settings
2/ Check your sales order config, if it works for one sales order type and not the other compare the two/

Open order value showing in VA05 not matching .

Hi Guru ,
In VA05 open order value in not matching with open order value in FD33 in cretit master .
Please provide input .
Edited by: Ravi Deolalikar on Jun 16, 2010 5:24 PM

1/ Check your credit control area settings
2/ Check your sales order config, if it works for one sales order type and not the other compare the two/

Automatic Product Selection item value not updated in S067

Hello,
We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
The item category is marked as credit active. update group is 15.
If i do main item pricing then the value is getting updated successfully.
I check several notes but nothing helped.
Pls. help.
Regards,
Praveen

assigned it in sales order at item level in Billing tab
Assign the same at header level billing tab in sale order.
thanks
G. Lakshmipathi

Excluding open sales order & Deliveries in Credit management

Hi All,
       I dont want to update all the open sales orders and deliveries in sales value in FD32. For this I have done the configuration and it is working fine. But after the configuration, system will delete the existing records in S066 & S067 and will not create records further even we create new sale order, del & inv.
Now I want to know wether there will be any problem if the records in S066 & S067 were deleted and will not be created further. And I also want to know wether the data in these infostructures (S066 & S067) were used anywhere in the system or not?
Kindly help me out in this.
Ratna

Hi,
    My requirement is while doing credit check system should consider only open invoices, not sales order or deliveries. For this I did the following.
    After running the program all my records in S066 & S067 will be deleted as I have deleted the update group under credit control area. Giving blank in update group under credit control area, will not update any open sales values or deliveries in FD32 for freshly created documents. But already there will be some existing open orders & del in the system which will show as sales value in FD32. This value will not be cleared for ever as there was no update group. So I want to clear these sales value in FD32. So I will run the program after deleting the update group and so the system will delete all the records in S066 & S067 and sales value will be zero in FD32 which is as per requirement.
Now I want to know will there be any problem by deleting this records. Wethere these records are anywhere used in the system other than FD32???
Kindly update
Ratna

Open order value not cleared Message: ORB 015

Hi All,
I have checked and searched for solution before poting this discussion, but not found anything relelvant to my problem.
While closing Project in CJ20N, I am getting an error message as -
Open order value not cleared
Message: ORB 015
It seems issue with incoming orders (sales orders), so I have run CJA1, and in output it is showing Processed object count as 1 but no detail log available for this.
Also in Settlement nothing is appearing to settle.
One thing I observed that one of the sales order linked with Project is rejected.
Can somebody assist me in resolving this issue?
Thank You,
Swapnil Kharul

Hi Swapnil,
There are 2 things you can check here..
1) Is this the first time you are trying to settle incoming orders for the said Project/WBS? I mean did you ever run CJA1/CJA2 and CJ88 post that for this project? You can check this in KE24 report. Check if you find any entries for record type I. If there are any it means settlement of incoming orders is being done.
2) For the said WBS hit Ctrl+F3 and check if there is a settlement rule maintained for Incoming Orders. On the settlement rule screen you will see a button "Incoming Orders". Click on that see if a rule is maintained.
Regards,
Gokul

LC open order value not accurate

Dear Guru,
1: A financial Document (Payment Guarentee) in vx13n has total value of 15 Million.
2: 12.5 Million is consumed by Sales orders.
3: Remaining amount as open should be 2.5 Million.
4: But VX13n Shows only 0.75 Million as open.
5: I have checked all assigned orders to that F.Doc and the total value is accurate at 12.5 Mil.
6: When i make an order of 1.7 Million its not allowing to save order as it says the F.doc not OK and value exceeds the F.doc open value.
Kindly help,
Regards,
Shahzad

Dear guru,
That is not the case. Here are the details:
LC Value                                          -14,998,626.22
Billed value                                          12,540,512.99
Open LC Value (Shoud be)                 -2,458,113.23 (Correct)
But it shows:
Open Value                                             -740,332.13 (Error)
Open Order Value                        1717781.1 (Error)
Kindly Help,
Is there a correction program to rectify this error?
Regards,
Shahzad

Sales Value not updated in credit check

Hai Guys,
I am facing an important issue in the Credit check. The Sales value (SO / Dly made but not delivered / billed) is not reflecting in the credit check.
1. I created a step in the pricing procedure and assigned its 'subtotal' to A (KOMP-CMPRE) - so that it can be taken for credit update.
2. I had activated the update of LIS S066 - for Sales Order credit
3. In the automatic credit control, I have checked the Open SO & Deliveries
Still my credit check is not checking the open SO & Dly.
Can somebody help me in this regard.
Regards,
Maheshwaran. I

Hi
Check whether you have entered the credit control area to that customer in XD02.
Use the Update group 000012
o   Sales order
      -   Increases open order value from delivery-relevant schedule lines
o   Delivery
      -   Reduces open order value from delivery-relevant schedule lines
      -   Increases open delivery value
o   Billing document
Reduces open delivery value
Increases open billing document value
Financial accounting document
Reduces open billing document value
regards
Edited by: Prashanth on Jun 10, 2009 2:52 PM

Open Order value for Customer in Credit Master

Hi All,
For ABC customer, if I check for Credit master(F.35), credit management(FD33) & Sales Summary, the Open order value(sales Value) is 10, 30,000.00 EUR.
If I calculate adding
Back orders - 83681.98
Open orders - 196763.43
Open Contract - 9,669.79
Open Delivers u2013 9,245.23
Receivables - 37,938.77.
Total will be 3, 37, 299.20
Please any one can tell where I can find the difference value(mean which tcode or report).
Thanks & Regards
Sunil

Hi,
Check with transaction code VKM1 or VKM4 or FCV3. The columns will show the details.
Regards

To exclude Open Order Value in Credit exposure for Delivery credit Block

Dear All,
I have assigned the credit Limit block at the Delivery Level.
For the credit Exposure, i have removed the ticked for Open Sales Orders.
But when i created sales Order, that open order value get added to the exposure. I want to have only the Open Delivery values and other pending Invoices.
Is there any option for me to avoid the open sales Order value get updated in the Credit Exposure.
Thank U,
Uwanthi

Hi,
Remove Sales document type from 'Assign Sales Documents and Delivery Documents' node and assign only delivery credit group.
Check configuration in OVA8 for both the credit groups.
In FD32 if sales value is already added as open items and exposure is updated, try using a new customer to test your requirement or reset the customer.
Regards,
Amit

Open order value and credit limit used are -ve

Hi,
We are running into the problem where there is a negative open order value and orders are bypassing credit hold.
The values are incorrect in the open order value and in the credit limit used. These both show as negative values, which is bad.
We have made settings in OVA8 correctly. Is there any other setting should be made in order to block the open order value and credit limit used ????
Thanks in advance. Appreciate if it is replied immediately.
Sankar

Hello,
Please take the help of the SD consultant in this regard. Because open orders means there are many like invoiced and not yet delivered. And the credit limit is also part of the SD to check.
Please check in the T.code FD32 to find out the credit limit detials of the customer.
If helpful pls assign points.
Rams

Subscription value not updated despite payment made days ago

Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account

Hello and welcome to the Skype Community.
You have totally different issues. ALWAYS start your own topic please.
1.0. Philippines Subscription.
Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription.

Contract value not updated in open order value of credit management

Similar Messages

Maybe you are looking for