Contracts info is not getting updated in VEDA table

Hello Firends,
Please find below my issue in detail:
I have created two contracts : one created first ( ex:1111) and then wrt to this I created another one (ex:1112),
When I run the table VEDA , sytem is fetching all the info of the first contract but not the second one's info as shown below,
contract 1111 has line items 00000,00010,00020,00030
contract 1112 also has line items 00000,00010,00020,00030
but when I run VEDA table , sytem is displaying as shown below :
1111   00000
1111   00010
1111   00020
1111   00030
1112   00000
Please provide your valuable inputs,
Immediate action will be apprecaited,
Thanks in advance.
Thanks & Regards
Suresh Kumar T

Hello Siva,
Thanks alot for your inputs but there were many contracts created long back and now I am trying to pull out those with VEDA table where I am unable to do it and also tried with newly created one where I am facing the same problem.
Thanks & Regards
Suresh Kumar T

Similar Messages

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Field TSABR is not getting updated in MHIS table.

Hi All,
The field TSABR (Scheduling Status: New Start Called) is not getting updated in MHIS table.
Please do tell me how it will get updated.
What is a logic behind it.
Many Thanks in advance.
Regards,
Sanjay Tiwari

Hi,
I checked it my system and that field was getting updated ..
For calls with status "New start called " will get updated in MHIS and for these call you will only have the field scheduling status :planned date called " as marked . pls check
regrds
pushpa

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

Not getting updating in a table....

Hi friends,
Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document....
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends,
Thanks in Advance..
Regards,
Harry...

Goodmorning,
Have you had a look for notes, Depending on the release and industry sollution you can find several notes on this subject (start looking for message RW 022).
Annemarie de Bruijn

Open sales order not getting updated in FD32

HI
We are configuring Credit management, and found that the open sales orders are not getting updated in FD32.
I have checked all the settings in OVA8 and all are working fine. This is a Static credit check and system is blocking the customer in case, the limit is exceeded. But the values are not getting reflected in FD32, for open sale orders, that are not blocked.
Info structure S066 in OMO1 all are configured perfectly. I have run F.28 and no log was issued.
Request to suggest other reasons for not getting updated in the table.
I have gone thru the previous threads, but cud not find any solution.
Regards
Vamsi Javaji.

Hi Vamsi Javaji
First of all check in OVA8 wheather you have checked Open sales orders feild or not . Secondly check in your pricing procedure wheather you have maintained Subtotal A or not for the Net Value .Also check wheather you have assigned to your sales document type correctly or not Finally check in OMO1 wheather S066 has been assigned correctly or not
Check wheather you have assigned the Credit control area to the customer in CMR , in sales tab
Regards
Srinath

Overhead Percentage is not getting updated in KONX

Hi All,
The Overhead percentage which we maintain in KZZ2 is not getting updated in KONX table. Can anybody suggest whether the OH percentage is available in KONX table only or anyother table also? Or Is there any program which needs to be run to update the KONX table?
Regards,
Rajeswari Shankar.

Hi,
U can also check konx1 table.
Check whether overhead calculations are run. Check whether CO42(in case it Product Cost Collector), KGI2(in case of costing by order), VA44(incase of costing by salesorder) run as applicable.
Regards
Sudhakar Reddy

Delivery document not getting updated

Dear Experts,
Till date our client was using VL04 for creating DA for only domestic sales, now they
are asking to provide facility to created DA for export shipment in VL04 and we have done customization for the same.
Now there are two separate (delivery document number) number ranges generated for
domestic and export sales.
Now my problem is : delivery document number generated for export sales is not getting
updated in database table VTRDI
Have any idea ??
Please advice
R.Karthik
Edited by: Karthik R on Sep 30, 2009 5:31 PM
Edited by: Karthik R on Sep 30, 2009 6:39 PM

Hi Lakshmipathi ,
Thank you so much.....for ur valuable advice !!
I have checked the table LIKP and LIPS ...and the export delivery number is getting saved
in these two tables...
But my problem is with creating shipment in VT01...as delivery number generated for export is not
getting picked in VT01 but for normal domestic orders it is getting picked.
I could not figure out where I went wrong??
could you please guide me on this issue.
R.Karthik
Edited by: Karthik R on Oct 5, 2009 8:46 AM

Error in Proxy- Table not getting updated

Hi,
This is an Interface between Oracle and SAP SRM. The Middleware used is
SAP XI.XI is fetching the data based on the SQL condition in the JDBC Adapter. The SAP XI JDBC Adapter picks up the
data with a poll interval of 600 seconds and do the required mapping
transformation in SAP XI and it gives XML to SAP SRM. The
receiver XI Adapter used is XI Adapter since there is a Inbound Proxy
program in the SRM system which when receives the XML from SAP X,
updates table . The data which is getting updated is of Bid
Invitation in SRM. I am able to see xml messages in SXMB_MONI in SRM system. But data is not getting updated in the tables.Any idea why this happening.
Thanks

have you created the sales order through BDC .... or manually ....check first ...
if it is through BDC ...then error in the Program ...
if it is throught Manual check with function People in SD they would have defined in the Customisation upto 130 lines of Line item ...
orelse the patch should be applied ...
if you ask anydoubt in this message ....please mention your sap version which you are working ...
Girish

Wage group is not getting updated in confirmation.

Hi
When confirmation is done through idoc ( type Conf21) then wage group is not getting updated in confirmation table AFRU.
When confirmation is done through co11n then it gets updated.
How to get it updated when confirmation is done through idoc.

Hi,
In we02 Kindly check if the required field is correct mapped in the IDOC.
Reg
DSk

BWFI_AEDAT table not getting updated - FI_GL_4 Delta

Hi Friends,
We have just started loading Delta loads using FI_GL_4.
The Changed records are getting updated correctly for all the documents into BWFI_AEDAT and loaded into BW except in cases of an Intercompany doc.
Is there a particular reason that changes to Intercompany Doc will not get updated in the table or is there a way to find out how this table gets populated so that I can debug this issue.
Any help is highly appreciated..
Ashish.

Hi,
How many days after INIT are you going for delta??
If there is entry in BWFI_AEDAT there is no reason why delta should not come.
check for newly created documents in BKPF using CPUDT to see if new documents have been created in this period too.
Regards,
Saurabh

544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

Master Data is not Getting Updated Properly.

Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
Utpal

Hi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar

Contracts info is not getting updated in VEDA table

Similar Messages

Maybe you are looking for