Contracts with Duet and Document Builder

Dear all,
does anybody have more detailed information regarding the technical document
flow / integration in SRM 6.0 for Contract?
I am esp. looking for the details between Duet, XI, SRM and the Document Builder.
Duet seems to be only the presentation layer, the contract document itself is
managed via the Document Builder and saved in SRM.
Looking forward to your insights / opinion!
Thanks,
Claudia

Hi Anil
How did you manage this? We also had the same problem in one of our contracts and what we did was that we copied the contracts from the legacy with the full value. That is suppose SAP went live on 1st April, 2009 and the contract was created on 1st January 2009 for a value of suppose 100 USD, with the first billing being done on 1st Jan for 33.33 USD for 4 months. We first created the contract with a validity from 1st Jan 2009 in the new system. We billed it with a billing type that we created that did not actually create new accounting entries as the accounting entries had already been created in the legacy system. In the new system then we recognised the revenue till the go live, so that the actual value remaining of the contract reduced. Then we started the billing plan of the contract from 1st of April 2009 for the remaining amount. So next invoice was created on 1st april for 33.33 USD. Can you share your solution.
Regards
Indranill

Similar Messages

  • What is diff b/w contract with doc and w/o document?

    hi
       what is diff b/w contract with doc and w/o document?
    regards
    Ram]
    Edited by: Ian Wong on Aug 13, 2008 7:01 PM

    Hi,
    Are you taking about Distributed contracts..if not then pls elaborate your question..explain properly, its use, where is req. etc..
    Regards
    Priyanka.P
    Edited by: Ian Wong on Aug 13, 2008 7:02 PM

  • Records management and Document builder in SRM with PS

    Hi,
    We are implementing SRM 5.0 with PS ( Public section), can any one share any experience and documentation about Records management and Document builder in SRM with PS.
    Thank you
    Sreedhar Vetcha

    Hi Chris,
    I am having the same issue as Patrizia while using BSP, SRM_DEMO_RECORD & SRM_DEMO_BSPEXT, to search/display, maybe update later the records,documents,and notes that are stored in RM. I have read all the documentation  described in your messages as to how to customize web display BSP application using these 2 BSPs, srm_demo_record & srm_demo_bspext. 
    I tested SRM_DEMO_RECORD with <srm:element> tag embbeded in the layout page, but it lists only the records that associated to a given RMS_ID and SPS_ID, and I wasn't able to get it to display the associated document and notes for a selected RM record. The comments on the iview page in BSP suggest the custom code is needed for initial request from browser and callback event to return the notification for the activities occurred in RM. As you suggested to Patrizia, I wonder if you've some sample code that i could use to make these BSPs work before additional enhancements is needed later.  As far as other prerequisit settings of http access and assigning search interface class to the correct service provider element type using GENSP_QUERY_EXT connection parameter are all properly set with my customer. So i'd feel really grateful if you could forward me the example codes for these BSPS.
    Regards,
    Amy Lee
    SAP NetWeaver Consultant

  • Hi I Have A Prepaid SmartPhone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line.

    Hi I Have A Prepaid Smart Phone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line. Is There Anyway I Can Use My Excellent Payment History With There Prepaid Department To Switch To A 2-Year Contract And Not Have To Pay The $400 Deposit. And This Is Due To The Fact I Have No Credit History Whatsoever

    Since you have no credit history, my guess is you would need at least a year of on time payments, and I'm not sure a pre-paid account would qualify as you can stop at any time. 
    You didn't specify your age, but getting started int he credit world is not easy - you may try applying for a gas card, or a credit card, and USE them, pay them off each month - and expect to take a year or more to establish a record. 

  • Prinitng a Service Contract with Terms and Contracts

    Hi All,
    I have a doubt on "Printing Service Contract with terms and conditions".I have searched numerous articles on web and as well as on metalink. But I couldn't find any solution yet.Can someone please suggest on how to print a service contract with terms and conditions on it?
    EBusiness Version: Oracle Applications 12.1.3
    Any suggestions are highly appreciated.
    Thanks in advance!!

    Hi,
    I'm waiting for your valuable inputs.
    I want to add one more thing,
    Please go through following pointrs:
    1. I have changed billing plan date for 1st line item ,then simultaneously system was adding one more line item in billing pan with -ve value.
    2. I have changed the billin plan in rest of the 3 line items then simultaneously system is adding one more line item but WITH POSITIVE VALE.
    Can anybody tell me beacuse of why system is creating one line item with -ve value and rest of the line item with positive value?
    which functionality or behaviuor of contract with priodic billing plan, is this happening in a system?
    Thanks in advance,
    Ujjawal

  • Do I get rebate if I sign 2year contract with ATT and buy iphone 4?

    Do I get rebate if I sign 2year contract with ATT and buy iphone 4?

    Yes - on the sales price for the iPhone 4.
    AT&T's fully subsidized price is $199 for the 16GB and $299 for the 32GB plus applicable sales tax.
    AT&T's full retail sales price if $599 for the 16GB and $699 for the 32GB plus applicable sales tax.
    A $400 difference.

  • RH6 crashes with th and conditional build tags

    Hello together,
    The attached code worked fine with RH X5, but leads to a
    crash with X6. To fix, you have to replace the <th> by
    <td>, but it is not too easy to find the topic within a
    project. The fix is quite easy, but it is hard to find in a big
    project.
    This happens, when the conditional build tag is used.
    Thanks and best regards,
    Katrin Lusser

    Hello Peter,
    My wife created the topic with X3 or X5.
    She just tried again with X6 and after several changes (set
    heading, insert, delete, etc.) she had the same constellation.
    Unfortunately, until now, she could not find out the exact way to
    reproduce. But it is definitely possible. We will post here, when
    we find out, how to do it.
    Best regards,
    Michael

  • HT4994 hello i have a blackberry bold and i have a contract with o2 and know i want a iphone so i have bought one but can you get your sim transfered onto an iphone 4 please thanks

    hello i have an blackberry bold 9900 and i was wondering if i could get my contract with o2 transfered onto another sim for iphone 4

    Go to an O2 location and they will be able to help you.
    They should also be able to take any contacts, etc you
    have on the blackberry and get them onto your iPhone.
    Or call O2 to set up the new sim and do your own data
    transfer.

  • Releasing Resource (File Handle) and Document Builder

    I am currently working on a project that uses a Jar file containing XML configuration files. The Jar file needs to read this file and the DocumentBuilder.parse method is called on the XML files. Later, new XML files need to be added to this same Jar file.
    The problem is that at that point I can't open the Jar file for writing because I can't unlock the file since it is held by the DocumentBuilder. Even when these objects go out of scope and are deleted the resource is not being unlocked. The only solution I've found is to copy the file and read from the copy and write to the original. This solution leaves extra files lying around though and is not very elegant. Is there anyway I can force that file handle to be destroyed and unlock the configuration file resource?

    That could be.....
    Basically I create a URI object using the path for the Jar file and the XML file within it. Then I use URI.toString() and give that to the Document Builder.
    DocumentBuilder.parse( StringURI )

  • Problem with material and document date in sales order

    Hi All,
    I am working in ECC 6.0 .I am facing problem with two fields when in enter in to sales order(tcode:va01)
    1.A material comes automatically in line item.
    2.Document date also comes as 27.03.2008 instead of todays date in each order i create.
    I think its not related to configuration.I think its related to some modifications through exits or enhancement points.could someone suggest me a where to check and solve that.
    Your's suggestion is appreciated.

    Hi Sharad,
    Check MV45AFZZ include in se38..It is a user exit for basic validation on sales...We may be able to find some code there (if screen data is predefined by code as mentioned)
    Hope it helps
    Regards
    Byju

  • Custom report with  FAGLFLEXA and "Document type"

    We have new GL and we must do a custom report like this:
    Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy 
    Profit centre 1_____________________ c1_______________d1
    Profit centre 2_____________________ c2_______________d2
    ect. ....
    The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
    The "Document type" is what worries me.
    I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table  FAGLFLEXT not contain the field "document type").
    The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
    Please, help me what exactly to do?My questions are these?
    My principals questions are these:
    1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
    2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
    3.  If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
    All suggestions are welcome.
    Thank you in advance. Many points to assign who will help me to solve this problem

    I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
    http://smlets.codeplex.com/

  • Schema Validation with Java and Document object

    Hi, I am working on a project that will validate an xml Document object from a child class. I seem to have completed XSD validation with new DOMSource(doc) and using schema factory, which doesn't support DTD validation. And now I am attempting to validate the DTD. It seems like all the examples I've seen are trying to parse files, and I am struggling with finding a way to validate it directly against the document object.
    The child class creates the xml document which is passed back to the parent class, and I need to do the validation in the parent class, so I need away to validate against the document object. This will be an assertion in Fitnesse if anyone is familar with it.
    private void doSchemaValidationCommand(int rowCount, Document doc, String xpathExpression)
             String validationPath = getText(rowCount,1);
             String extensionSeparator = ".";
             Boolean error = false;
             String ext = null;
             try
             int dot = validationPath.lastIndexOf(extensionSeparator);
            ext = validationPath.substring(dot + 1);
             catch(Exception e)
                  this.wrong(rowCount, 1, e.getMessage());
             if (ext.equalsIgnoreCase("xsd"))
             try {
             SchemaFactory factory =
                SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
            File schemaLocation = new File(validationPath);
            Schema schema = factory.newSchema(schemaLocation);
            Validator validator = schema.newValidator();
            try {
                validator.validate(new DOMSource(doc));
            catch (SAXException ex) {
                this.wrong(rowCount, 1, ex.getMessage());
                error = true;
            catch (IOException ex)  {
                 this.wrong(rowCount, 1, ex.getMessage());
                 error = true;
           catch (SAXException ex) {
               this.wrong(rowCount, 1, ex.getMessage());
               error = true;
           catch (Exception ex){
                this.wrong(rowCount, 1, ex.getMessage());
                error = true;
             else if (ext.equalsIgnoreCase("dtd"))
                  try {
             }

    I tried this but it doesn't give me any validation of whether or not it was completed successfully, it just adds a tag for the dtd to the xml and doesn't seem to do anything further with it, am I missing any steps?
    else if (ext.equalsIgnoreCase("dtd"))
                  try {
                       DOMSource source = new DOMSource(doc);
                       StreamResult result = new StreamResult(System.out);
                       TransformerFactory tf = TransformerFactory.newInstance();
                       Transformer transformer = tf.newTransformer();
                       transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, validationPath);
                       transformer.transform(source, result);
                  catch(Exception e)
                       this.wrong(rowCount, 1, e.getMessage());
                       error = true;
             }Edited by: sarcasteak on Apr 13, 2009 1:33 PM

  • Cant sync contracts with isync and e815

    running 10.4.8 and isync 2.3, I cant seem to sync these things together to transfer my contracts from my mac to my e815.
    does anyone know why?

    BBefore you head off to the Genius Bar, you did try basic steps like, quitting iTunes, rebooting the Mac and resetting the iPad? And by resetting the iPad I mean holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. That resets the iPad system and can help with a whole lot of weird issues.
    Something else that migh help is Settings>General>Reset>Reset all Settings. That resets all device settings to defaults and sometimes corrupt settings on the iPad can cause problems. No data is lost if you do this, but you will have to enter all of the device settings again.

  • Mxmlc ant  task with Groovy and ant builder

    Hi,
    i'm doing some Groovy scripting in the build scripts of my project and among the other things have included Flex sources compilation in there. It cares about auto-compilation of source trees so maybe someone will be interested in that:
    http://tech4web.blogspot.com/2008/12/mxmlc-ant-flex-task-in-groovy.html
    Cheers,
    Piotr

    Are you using Adobe FlexAnt?
    On this
    page
    , there is a <compiler.library-path> node that seems to
    import a bundle directory that contains locales. I believe
    <compiler.library-path> is from FlexAnt, so you would need to
    enable it if you haven't.
    Also look on the next page from the link I posted, there is
    another example on how to import bundles in an automation.

  • Integrate ECC with SRM Document Builder

    Hello SRM Guru,
    We have requirement in our client to Integrate ECC with Only SRM PPS Document Builder Component.
    Here is more detail:
    After creating PO in ECC , User should click some button in the PO Transaction that should launch the document
    builder Webdynpro where they can enter some more questioners then the PDF format or Word format contract will be generated then it should be attached in the PO in ECC.
    Client wanted to use only SRM document builder component. Could you please let me know the possible
    option to integrate ECC and Document Builder.
    Like how to open document builder webdynpro application form ECC and how to transfer PO details to Document Builder
    and finally how to attach the generated contract to PO in ECC.
    Thanks in Advance.
    VJ

    The upload type should be same, for ECC and SRM .. only the datasource need to be changed
    Example:
    If I you want to integrate Contracts from ECC and SRM, The OPM_SOURCES table should be like BELOW
    ECC:
    SOURCE ID  :    SRXCLNT220##ZBBP_TD_CONTR_2
    SOURCE NAME  :  CONTRACTSSRM_DS
    UPLOAD TYPE :  CONTRACTS
    SOURCE TYPE    DS
    SRM
    SOURCE ID :     EXSCLNT220##Z_SADSECC6CONTRACT
    SOURCE NAME :   CONTRACT_DS
    UPLOAD TYPE :   CONTRACTS
    SOURCE TYPE :   DS
    Rgds,
    Raj

Maybe you are looking for