Contrast changes when import from FC to Color

Hi, I have a sequence in Apple Intermediate codec which looks O.K. in FC, but in Color the blacks are crushed and highlights blown...
I usually work with XDCam footage and don't have this problem with it. Any ideas? Thanks.

That's what I thought when I saw the values above and below the cutoff points -- either that or BS is set incorrectly or malfunctioning. At this point, I'm seeing a bigger difference between the FCP and COLOR displays, and I'm wondering what the scaling factor is between the two applications dealing with the media. There used to be a problem like this when "Force RGB" was invoked, but I thought that had been dealt with -- and I mean years ago.
The short and simple is that COLOR is usually right. Personally I grade with Safe ON, and adjust the levels so that I know what I'm going to get, no surprises. To a certain extent, I don't even care how the media translates, as long as I can get it back, and make it what I want it to be. In other words, it all starts out wrong, anyway, right?
When you pull the levels, do you recover any of the "blown-out" areas that can be shown to contain detail as displayed by FCP? We aren't talking about media that has just simply been over-exposed and clipped out, never to return, correct? And, on the other hand, is COLOR remapping the media up into a region that can't be recovered?
Just as a small side caveat, these software "legalizers".... aren't.
jPo

Similar Messages

Look of photos change when import from D40 into iPhoto 6

I'm using iPhoto 6 and have a Nikon D40. I'm having a problem when I import my photos -- the image quality changes when they go from the camera into iPhoto. The images look more contrast-y, more saturated. I mean, the reds and oranges are so intense it's crazy. They definitely did not look like that when I viewed them in the camera LCD.
I've tried checking in preferences, but can't seem to find anything that would alter the images during transfer. Would this be a camera problem? Anyone using iPhoto 6 have the same problem as I am with their D40?
Any help would be much appreciated!

I am having the same exact problem... iPhoto 6 and Nikon D40. If I import the photos to a folder first, then import from the folder to iPhoto, I can open the iPhoto version and then open the folder version using Preview, just by clicking on the original. I then compare the two side-by-side on the computer screen. The original always looks fine in Preview, so it is clearly a problem with iPhoto over-saturating the photos. I have no solution, but only this observation.

Calendar Dates: Color Changes When Importing From iCal Not Consistent

Okay. So I wanted to make a family calendar that contained all the birthdays of my extended family. Using "import birthdays from address book" is not an option since I've got lots of friends' birthday included. So I went through the painstaking process of creating a new calendar in iCal and named it "Family Birthdays" and added the birthdays of all my family members. I selected "all day" and made them recurring "every year" and "forever".
To my suprise I noticed these birthdays were indicated on the iPhoto Calendar with a red date and red text. I made no changes to fonts and simply selected
"add iCal calendar" to my iPhoto calendar.
But here's where it gets funny. Approximately half-way through the calendar the dates and titles were black. The calendar was 12 months and began in May of 2006.
I actually like the red dates.
By the way the calendar style/theme used is "large type".
Questions:
(1) why did it change to black?
(2) how can I consistently see these dates in red?

Allan:
Welcome to the Apple Discussions. See my last post in Calendar won't print black directional triangles. You can get any color you want but it requires some work.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

Hi All,
Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options. The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
Thanks in advance,
Phil in San Diego

Phil,
PhilipCWells wrote:
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed. The link is:
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
One of them should help you with this.
Jeff (in San Diego as well)

Bad image quality when importing from word

When importing from MS Word 2003 to RH X5.0.2, embedded
images are converted to jpg whith an obviously quite moderate
compression qulity. This is particularly evident for screenshots.
Is there a way to improve the image quality?

Peter , these images were copied and pasted directly in to
the Word-document (using the Print Screen button) but I did find
out something. RoboHelp generates two image files of the types PNG
and JPG for each Word image (named, e.g., image102.png and
image103.jpg). Regretably, the lesser quality JPG is always
referenced in the topics instead of the much better PNG. Sometimes
the two images greately differ in size (pixel size), but most of
the time they are about the same size.
So the task might be to change the references in all topics
using a script and then manually checking the images for their
size.
An observation: Any GIF images in the Word file (i.e., real
*.gif files that were inserted over the Insert menue) remain GIF
files after the import, they are not converted and maintain a good
quality.

Dropped frames when importing from sony dcr-hc52

hey all,
i'm getting a lot of dropped frames when importing from my sony cdr-hc52. anyone had this experience? is there a setting i'm missing that would correct this?
thanks in advance,
filmgrrrl

Hello kellyfromkenley, Depending on how you move the video or share the video from iMovie to iDVD it can make a big difference. One way is to go to the Share Menu > Share to iDVD. But the better is to Share to Media Browser instead. Try this:
Go back to iMovie and open your Project in Project Library.
Go to Share Menu > Share to Media Browser
Choose the Large size and let it run until it finishes
Quit iMovie and open iDVD.
In iDVD click on the Media Button, then click on the Movies button and look for your project under the iMovie star icon in the Media Browser itself.
Drag that project icon into the iDVD project window and burn another disk
I think you'll see an increase in the visual quality using this method.
The reason this has an effect on the visual quality is there's a whole different set of operations performed on the video when you first Share to Media Browser. The side effect of those changes in steps is a much better looking DVD from your iMovie project.

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

Have a look at your import setting specifically Store Files:
Make sure it is set to where you want the originals to go.
Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

When importing from a Word document placing the text in InDesign

When importing from a Word document placing the text in InDesign I can only see the text from the first page of the Word document. I have increased the number of pages in the Indesign document to more than what is in the Word document, still only text from the first page is shown. What am I doing wrong or did I not set a setting correctly?

When you want to auto flow text while placing, hold down the Shift key when clicking with the Place cursor on the first page. New pages will be generated and text will be auto flowed using the margins set up on the master page.

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Photos sent to file on desktop when importing from memory card

The photos sent to a file when importing from a memory card appear in the file as Adobe documents and cannot be opened. If I try to open a message appears 'Adobe Reader cannot open this document as it is not a supported file/
What has gone wrong?

You have already opened a thread on this issue, we don't need a second thread on the same issue.

Aperture Import destination grayed out when importing from iPad

I'm trying to import a bunch of photos from my iPad. I want to dump them all in one project in Aperture, but after selecting the iPad from the import source list, it grays out the options to select the destination. It also grays out the option to uncheck the Autosplit events. I do not want to do this import and then have to go back and merge 20 projects. Any ideas?

It' how Aperture works with the iPad see Aperture 3: Photos are not split into projects by date when importing from iPad as well as other threads here asking similar questions

Keyboard Shortcut for adding clip to queue when importing from P2 card

Does anyone know what the keyboard shortcut is for adding a clip to the queue when importing from a P2 card? Thanks!
G5 Mac OS X (10.4.8)

That would be the Log Clip button which is defaulted to F2.

Wrong capture time when importing from iPhoto to FCPX

I am experiencing a strange problem when importing from iPhoto to FCPX. If I open the info panel in iPhoto I see the real date/time when the picture was taken, but if I import them to an event in FCPX using the PHotos Browser and I check the info it shows the time when the image was imported to IPhoto and everything gets messed up.
I have search for somebody with same problem but I have not found anything so far.
MY workaround is to import directy onto the timeline, but it is... well, a workaround.
Thanks in advance

Why is knowing that important during the edit?
Yes, FCP only shows the date imported" date metadata. Future updates of FCP X I assume will add more metadata support, such as Creation Date and Modification Date, since metadata is vital to FCP X and there are some metadata handling features that are on the way.

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

HT4101 How is the photo size affected when importing from the SD card to ipad (2) ?

How is the photo size affected when importing from the SD card to ipad (2) ?
If they stay the same, any options I can have to "re-size" the photos so that I could use it for a photo storage when traveling?
Thanks.

To re-size, you can use:
https://itunes.apple.com/sg/app/simple-resize/id327776379?mt=8

Contrast changes when import from FC to Color

Similar Messages

Maybe you are looking for