Contrast mismatch between Organizer and Editor

I can edit an image in Editor to where it looks great, to include the contrast, brightness, shadows, etc.  When I send it back to the Organizer, it look much too contrasty and dark.  When I use the same images in a slideshow originating in Organizer, they still look too contrasty.  Is there a way to correct this?  I'm using PSE 10 on a Windows 7 -64 bit machine. Thanks for any ideas.

Thanks for your quick response.  I just checked out the settings in both the Editor and Organizer and they're both set on "let me decide".  I'm not sure what to do on that one.  I could go with optimizing the computer screen with sRGB, or the Adobe RGB for the printer, or no management, or decide on the fly.  If I go with the computer, I guess I'd have to change it when I print a photo out, and vice versa.  Have any suggestions for me? Thanks again. 
New update.  I have a Dell color laser printer, and I just checked the manual.  It offers both sRGB and AdobeRGB.  My priority is really to have a good printout.   If I check sRGB I should be safe for either print or computer, but I'm wondering if I'd get as good a printout with sRGB as with AdobeRGB.  The easiest might be to see what the printer is curently set on, and then set PSE Organizer and Editor to match it.  I'll do that, and then see if that helps the mismatch between Organizer and Editor. 

Similar Messages

  • Kind of broken communication between Organizer and Editor PSE 9

    Hi,
    Today I when I opened my PSE 9 Organizer to select and edit some photots uploaded yesterday, when I selecrt3ed the photos and clicked Fix>Full Photo Edit menu, the Editor opened fine, BUT no photo appeared on the Editor as always. This is the first time this happens and I have been working for more than a year with PSE9 without any problems.
    Now, in order to edit the selected photos on the organizer, once the Editor opens (showing no photo) i have to open the Editor´s Project Bin at the bottom and then select "show files selected in the organizer" and there they are, but this didn´t happened before.
    Thanks for any help.
    Diazruanova
    Windows 7 x64 Home Premium

    Thanks a lot Barbara,
    Maybe I did not explain myself very well, but what I have been doing for a long time, was selecting one ...or several pictures for editing from within the organizer, and after the Editor opened, there was always a picture on the body of the Editor, ready to be edited, but NOT so anymore since today in the morning. It is not a big deal, because as I explained on my first post, now I have to look for the pictures in the Editor´s project bin and select the one I like to edit, but it is odd that this just happened today after almost two years of being working the other way. 
    Is there some  way to repair the installation of  PSE9?
    Greetings from Mexico

  • No interaction between organizer and editor

    When my students select fotos in there catalogue and choose any action (f.e. photomerge or quick editing...), nothing happens only the editor starts but it shows no foto's.

    Hi Ken
    It's PSE10 on Windows8. The very strange thing is that on my PC  (teacher login) every thing works fine but on the studentpc it doesn't. I didn't try to login with another login, but tomorrow i will.
    PS: Nothing starting from the Organizer works. Even if the only select some pics in the organizer they can't see it in the Editor. R-click won't do it either...
    Kristtlijntje

  • How do I make Organizer and Editor open at the same time?

    I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
    Thanks,
    K

    Create Desktop shortcuts for the Organizer and the Editor:
    The Editor's executable is:
    "C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    The Organizer's executable is:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    Ken

  • How many photos can you load into Organizer and Editor

    How many photos can you load into Organizer and Editor at one time.  I receive the error message, "Unable to Import Files", which says "You exceeded number of files that can be selecteed and imported at once...."  What is the number?  Secondly is there a way around this for either the Organizer or Editor to work on thousands of photos at the same time?
    Thanks

    I have never heard of this particular limit before.
    Please understand, this appears to be the limit you can import into the Organizer at one time -- you can have as many photos as you want in the Organizer; but apparently you have to import in batches rather than all at once.
    I don't think it applies to the editor; and I can't imagine wanting to have more then a few files in the editor at any one time ... even if you could open 2000 photos in the editor at once, what sense would that make?

  • Mismatch between availability and marker

    I have run the following command:
    /repvfy -detail -fix -pwd password
    and am seeing a section called "Mismatch between availabiltiy and marker". What does this mean? I know there is a bug out from Note: 735957 against 10.2.04 and that patch 6951116 is available. I also know this bug is fixed in 10.2.0.5. But I don't know what exactly this section is telling me. Here is the output I am seeing:
    6. Mismatches between availability and marker
    TARGET_GUID TARGET_NAME TARGET_TYPE MARKER_AVAIL_STATUS MARKER_TIME CURRENT_STATUS START_TIME
    9CB8EE19415C3C6B55954BF3346C1106 ssan-Internal Concurrent Manager oracle_apps_icm 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:22
    1B21AAEF5AC63DD44FE339B7852EA1EE ssan-Report Server_ssan_devstar2 oracle_apps_reports 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:13
    F5EAD749526EC1116A70157771E3D011 ssan-Oracle Workflow Agent Listener oracle_apps_wfalsnr 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:29
    CD32714673BC508CDBF85BF191A5A1B7 ssan-Workflow Background Engine oracle_apps_wfbg 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:26
    FADA1D6BF4DFD0E8AA1739A6666BA210 SSAN oracle_database 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:40
    0BE2ACE2EDC7271744DA1A249E30C9A5 APPS_ssan oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:12
    89D241EEEF24821E30AD66741BC3D433 devstar2.rtd-denver.com oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:20
    F40BAF501645A5957A498E7A270AEA47 ssan-Apps Listener_ssan_devstar2 oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:28
    8 rows selected.

    Various provision like Freight, transport etc .
    these should go to separate GL accounts. if you give wrong account assignment value will be passed to GRIR. then difference will happen
    sunoj

  • Mismatch between sound and video

    When I watch a movie in iTunes of Apple TV (2gen) and I want to move it few seconds/ minutes and more backwards then it like "losing its mind",
    the video jumps forward (a lot forward) and the sound stays the same, so ther is mismatchment between sound and video.
    What can i do to solve this problem?
    Thank you!

    Am I the only one suffering this issue with the video transcoding?

  • Color mismatch between CS4 and Canon PIXMA PRO6500

    Hi there! I am trying to research if anyone else is having a problem with color mismatch between CS4 and their printer. Last night I printed a .tiff image out of CS4 to my Canon PRO6500 printer and the sky came out purple / pink! It was supposed to be a stormy grey color. I have the color management turned off on the printer settings. I have CS4 manages color turned on and the correct ICC profile selected for the paper I am using. When I do a soft proof in CS4 the image looks fine, but when I print I get something completely different, mostly with the sky (purple / pink) color! Just for the heck of it I did a Print Preview under my Page Setup and guess what, the sky actually shows purple / pink! So I have no idea what's going on. I checked all my setting, ink cartridges, tried different paper with the appropriate ICC profile and no dice. Still have a goofy looking sky! I thought PROOFING the image is supposed to show you how the printed image is going to look? apparently it doesn't because it's not. The Print Preview has an accurate representation of the print but I have no idea where the pink / purple sky is coming from. They are supposed to be stormy clouds as I said. I appreciate any help anyone can provide .
    Sabciu

    I have the color management turned off on the printer settings.
    But do you have a measured color profile based on a sample print? Most likely not, so this is not doing anything in your favor. The current profile may present the defaults for a given printer, but not the actual density based on your other printer settings. So by all means, unless you can be sure to obey a full calibration throughout, turn on the printer CM. Also, since it is a Pro model, you may actualyl have to use the dedicated RIP software that was bundled with it to get correct results, not the default windows print engine.
    Mylenium

  • Config mismatch between VSM and VPath - CSCum76142 bug

    Hi all,
    I got the error message "Config mismatch between VSM and VPath" on my Nexus VSM but I could not see any detail regarding this bug ID due to permission issue. Has anyone else got access to see this bug detail and able to share? I need to know if this bug is critical or just cosmetic. Thanks 
    regards,
    Robin

    Hi Robin,
    This DDTS was Junked. But here's the workaround that is mentioned:
    1. Deleting the vservice config (no vservice) & reconfiguring vservice, will get rid of this mismatch issue.
    2. Toggling the port-profile should also work.
    I see couple of other DDTS as well related to this and i would suggest to ask this question in "Other  Data Center Subjects" forum for detailed and quick answer.
    CSCtz36835 :Config mismatch on VSM and Vpath after deleting service vlan
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful.

  • Data mismatch between 10g and 11g.

    Hi
    We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
    The data is matching for the below scenarios.
    1) When the column is removed from both 10g and 11g.
    2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
    It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
    Thanks

    jfedynic wrote:
    The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
    In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
    Using the 10g Client to connect to either the 10g database or 11g database it works fine.
    Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
    What has changed?
    Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
    29275, 00000, "partial multibyte character"
    // *Cause:  The requested read operation could not complete because a partial
    //          multibyte character was found at the end of the input.
    // *Action: Ensure that the complete multibyte character is sent from the
    //          remote server and retry the operation. Or read the partial
    //          multibyte character as RAW.It appears to me a bug got fixed.

  • PSE 11 color intensity differences between Organizer and Fotoeditor

    The EIZO CG223G monitor color intensity using PSE 11 Organizer differs significantly from using Fotoeditor for the same tiff and jpg files.
    What ist the reason?
    How to make the color rendering the same?

    Hi Barbara
    first of all thanks for the very quick response.
    After checking your advices my observations are as follows:
    1. Organizer and Editor are in regard to color management synchronized: When I change the settings in Organizer they are automatically changed in the editor. Consequently they are always the same.
    2. When in the "Always Optimize Colors for the Computer Screen" modus I observe when moving the Editor screen from my notebook monitor the EIZO monitor, colors are deteriorate immediately - like expected - but after 10 s they change to the right color rendering back. The right color rendering I can judge because it is a test tiff file with a corresponding color print out. When I do the same with the Organizer monitor it does not change after 10 s.
    The question is: does color optimization for the belonging monitor does not work in the Organizer properly?

  • Elements Organizer and Editor Fonts Too Small

    Is Adobe ever going to fix this problem of the fonts not adjusting their size in both the organizer and the editor?  The only option to alter the font seems to be to switch to a "System Font", but that option doesn't work. It doesn't change the font size at all, even if you turn off Aero and set the system font to 125%, the menu fonts don't change. In short, the software is not Windows compliant, afte how many years that Adobe has been making a windows version of this ptogram?
    The default font size can't be read more than a foot or so away from the screen on today's pretty much standard 22" 1680x1050 LCD display. On top of that, who in their right mind thinks black text on a gray backgound effects 'contrast' rather than 'blend'?
    I've searched the internet regarding this problem, and it seems to have persisted through multiple versions of this software, but has gotten worse through versions 7, 8 and 9 based on user numerous posts. Actually, it looks like Adobe just doesn't plan on addressing the problem at all.
    Does anyone even get a response from Adobe when they post about this font issue? It doesn't look like it, as far as I can see.  

    That seems to be a reasonable explanation.  Since a thumbnail does not have as much information as the actual file, it shouldn't be surprising that visual difference exist.  I just wasn't expecting them to be quite so noticeable.

  • Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

    Hi,
    I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
    I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
    <b>I have following data in ECC Table (AFPO - Order Item).</b>
    AUFNR (Order Number) --> 4000460
    PGMNG (Total planned quantity)  --> 0
    PSMNG (ORDER QTY) --> 2000
    <b>Extract Structure is showing following data.</b>
    AUFNR (Order Number) --> 4000460
    PGMNG (Total planned quantity)  --> 2000 (It should be zero)
    PSMNG (ORDER QTY) --> 2000
    I have checked with many other order numbers. <b>The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.</b>
    Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done  all required steps refreshing data (deleting setup tables, filling set up tables etc.).
    pls suggest. Poinsts will be assigned to every useful answer.
    Thanks in advance.

    Hi Avneet,
    I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
    I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
    Ex: AFPO value 1000 ---BI Value 1000
    Now released in ECC
    AFPO value 1000 ---BI Value 1000
    In ECC value changed to 1500 after the release. BI will not pickup the change.
    Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
    I was just going thru forums for the solution. After i found the solution. I am just updating it.
    Hope it helps you.
    Thaks
    Srikanth

  • DataSource / Structures mismatched between Dev and Test Systems. ..!!

    Hi,
    We are doing a scenario. Where XI will update the data into PSA through ABAP proxy.
    Scenario worked perfectly in development system.
    We transported the objects from Dev to test. The Strucures are mismatched in SE11 between development and Test systems as below.
    Data sources (ZDS_RECIHDR and ZDS_RECTPALL) looks ok. But when I saw the structures in SE11 they are not correct, they got mismatched.
    Development:
    /BIC/CQZDS_REC00001000 - Header (ZDS_RECIHDR)
    /BIC/CQZDS_REC00003000 - Allocation (ZDS_RECTPALL)
    Test:
    /BIC/CQZDS_REC00001000 - Allocation (ZDS_RECTPALL)
    /BIC/CQZDS_REC00003000 - Header (ZDS_RECIHDR)
    Kindly let me know where it might have gone wrong?
    Thanks
    Deepthi

    We done it already. Still it is failing.
    While transporting, it is failing and showing the error as
    Program ZPI_CL_IA_PAYMENT_ALLOCATION1=CP, Include ZPI_CL_IA_PAYMENT_ALLOCATION1=CM001: Syntax error in line 000016
    The data object 'L_S_DATA' has no component called'/BIC/ZSALENUM', but there is a component called
    Program ZPI_CL_IA_PAYMENT_HEADER======CP, Include ZPI_CL_IA_PAYMENT_HEADER======CM001: Syntax error in line 000016
    The data object 'L_S_DATA' has no component called'/BIC/ZTRANDATE', but there are the following com
    The Structure is mismatched in SE11 between header and allocation structures. That is the reason it is failing.
    Any more ideas pls?

  • APP CRASH in 7.0 upon Opening Organizer and Editor - Vista - Help!

    When I open my Photoshop Elements 7.0 Organizer, the pictures load and then I get a message that the program is closing due to APP CRASH.
    Any ideas why this may be happening?  Is there a limit on the number of photos in a catalog?  I can't imagine that I am over the limit on this.  We have gone through several troubleshooting recommendations including reinstalling the program and it is still crashing upon opening.  Now the Editor is crashing too!  Any ideas?  Thanks!

    Unfortunately, there are many reasons why the PSE Organizer might crash, and often it is hard to diagnose quickly the reason for the crash.   Here are troubleshooting steps to try:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes
    Given that both the Organizer and the Editor are crashing, start with step 4, installing the licensing-service update, and if that doesn't help, try the others.  Even if you think you've tried something similar, repeat the step exactly as described.

Maybe you are looking for