Contribtution portlet check in issues

I need some help with contribution portlet to be able to check in content to content server.I am using weblogic workshop and using content portlet suite with Weblogic portal.I get the portlet when i am running on my localhost,but i am not able to check in content .How can i tie the check in form to correctly be configured with content server for correctly selecting all the users and groups and then be able to upload documents.

I get the message System needs login authentication credentials .I have users sysadmin and a couple of local users and one weblogic global user on my content server.But when i run the contribution portlet ,i only get anonymous by default in the author and only one security group"public".I did the cps initialization properties setting before.Please let me know how i can proceed to tie the check in and upload correctly.
thanks
K

Similar Messages

Portlet Preferences Gateway Issue

I have a custom portlet, I am setting 2 custom preferences:
PortletResponse.SetSettingValue(SettingType.Admin,"URL", TextBox1.Text);PortletResponse.SetSettingValue(SettingType.Admin,"Count",TextBox2.Text);These settings basically Set the URL and Site Count for a List. I have built this using the Plumtre EDK, and .net.I have a remote Server, IE not in the same Domain as the corporate portal server. The Preference work great. The portlets render fine everything is wonderful.When I place the code on our Production environment, the initial preference page loads with the gateway, but during postback where I am setting the Preferences above, I get a Gateway exception error. When I look at the URL of the preferences I do indeed see a 'Local' non gatewayed server in the URL. (When I use a server not on our Domain the preference are gatewayed." Has anyone run into this before..I haven't seen it, bugging me!

Hi Terry,
à
I can ping the server with no problem when using the ip address, I can not do it using server name.
Generally, it seems to be a DNS issue. on current situation, please run
SBS BPA and check if find some related issues. Then, please use
Nslookup tool to troubleshoot DNS problems. Meanwhile, please run
DCDIAG /TEST:DNS to validate DNS health. In addition, would you please let me know how configure DNS?
How To Install and Configure DNS Server in Windows Server
2003
Please also open Event Viewer and check if can find some events or errors. Those may help us to go further
analyze.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Hi there i know someone has sent me an email, but it hasnt come thru on my email account how do i check for issues

Hi there
I am experiencing some issues with the email. Up until several days ago i was recieving emails from a company to do with work, now i am not recieving any of these emails but am getting everything else. I need to make sure that the issue is not from my end. I know that the company uses windows and i use mac. I have tried to get several people from the company to send thru to me an email for test purposes, however even these havent come thru. I am unsure as to what is happening and if anybody could help I would really appreciate it. I am going out of my mind, as the only way i get work is thru email, and with one company unable to send me work I could lose my job!!! Stressed.

have checked spam nothing which is what worries me! I have recieved emails from these people before the 26th of sept but after that i know they have sent me emails that i havent recieved.

AP Check printing issue- amount distorted

Hi,
When I am printing or creating a check for a Vendor other than US , the amount on the check gets distorted. For e.g I clear an invoice ( doc curr - USD, local curr - USD ) but for a vendor whose country in IL ( israel) , the amount changes the format on the check, but when i change the same vendor's country to US in the master data , the amount shows fine . So I know it's an issue with country and not the check form .
Kindly let me know how can i fix this issue.
Thanks in advance.

check whether you have mainatianed the necessary config for the country and currencies in your spronetweaver>general settings & currencies.
sarma

AP - F110 - SAPFPAYM - Adobe Checks - Printing Issue

We have ECC 6.0, and we recently started using Payment medium workbench to print adobe check forms. All configuration and programming is done, except that we encounter an issue once in a while.
Using F110, we will complete a proposal, review it and then execute the payment medium run. Out of 60 or so check runs, we will have a batch that does not print the last few checks out.
For example, in one instance, out of 100-200 checks, the last 4-6 did not print. All tables (PAYR, etc.) and vendor were updated with a payment document and check number, and the spool does show an adobe image available for those particular items.
The most recent occurrence involved 587 checks, where the last 54 did not print. They are visible on the spool.
The logs of the payment run do not show any error messages or warnings. We verified with our Basis team that there are no messages or logs associated with the actual printers, and yet, they just do not print!
I have searched notes, forums and boards trying to find anyone with a similar issue but no luck thus far.
I have created the issue in Qas as well, by using the same steps to create 588 checks via F110, but only 27 print out? I tried the "Reprint" option on the F110 screen, and the same 27 checks print out. (Its the first 27 of the spool that print each time.)
Again, the spool shows all 588 checks with images and all data/tables are updated appropriately.
In OBPM4, we have the box for "Payment Document Validation" checked, and the correct printers assigned.
Does anyone have any suggestions on what might trigger this?
Where else should we be looking to find some type of status or error message?
Would it be helpful to run through the process with some type of trace running in the background?

Thank you for your response.
I wondered about a printer memory issue as well...however, I am not sure how much space an adobe check might take up versus the SapScript check form we used before.
Any suggestions on how to go about verifying this theory? (Basis should monitor from their side when I start the print program?) (Is there a report or status I can physically check or create from the printer itself?)

How to check Vendor issue stock shelf life

Hi,
As I know, Tcode--MB5M is for checking shelf life for normal stock material.
The question from our user is to check the batch shelf life which has been transferred from our restrict stock to vendor issue retrict stock. MB5M seems not make it...
Thanks a lot.
Bryan

Hi Pankaj,
Thanks firstly. But Tcode-MBLB is for checking the stock in subcontracting.
What I am seeking for is a transaction to check the shelf life of the stock. ( In our system, we use batch management..So the exact question should be that how to check the shelf life of batch which is under subcontracting stock.)
If you try Tcode-MB5M, you would know this tcode is for checking batch shelf life under normal stock, but it could not used for checking the shelf life of batch under subcontracting.
Thanks alot.
Bryan

Regarding new bank to be created for new office ...check printing issue...

dear all..
i need to create bank for our new office say BARODA office for check printing purpose.
our comp. has allready configured for mumbai and main office bank...
but i dont know the full cycle.. can anybody tell me the process to implement the same ?
thanks in adv..
jigar patel

Thanks Sandra for your response.
From the PCL Font list it says
USB Resident storage fonts
Font = H E-13B-600
Pitch/Point = 8.00/8.4
Esc sequence = <esc>(0Q<esc>(s0p8.00h8.4v0sb0T
Font = USB1 1
Font id = blank
I am only using Print control = SF450 as the SAPSCRIPT is copied form an existing one, but event he SAP standard text will not print (vanilla) SAPSCRIPT-MICRTEST or SAPSCRIPT_MICRTEST the correct fonts.
Do you think font pitch may be the issue, we are planning to change this tomorrow to 10.
Does the escape sequence need to be added as a new print control to the Device type in SPAD or does SF450 HPLJMI still work?
One other thing from note 94233 I checked the RAW spool file and it does contain
ST0652139Schriftart MICR_E 10 Punkt (MICR E-13B)
MT0198406457
CP40040000E
FCMICR_E 100 00180 SF450SF450400400180E
ST0018001A
MT0226706457
CP11000000E
FCCOURIER 120 00144 SF012SF012110000144E
ST0100807transit
MT0198406697
CP40040000E
FCMICR_E 100 00180 SF450SF450400400180E
ST0018001B
MT0226706697
CP11000000E
FCCOURIER 120 00144 SF012SF012110000144E
ST0086406amount
MT0198406937
CP40040000E
FCMICR_E 100 00180 SF450SF450400400180E
ST0018001C
MT0226706937
CP11000000E
FCCOURIER 120 00144 SF012SF012110000144E
ST0072005on-us
MT0198407177
don't know what more to look for.

DW CS3 Check Spelling Issue

Back ground: I have a long IT career but have never really done any web dev before. This is my first real stab at building a website so this may be a 101 coding error but I had a heck of a time figuring it out so I thought I'd share incase another newbie had a similar issue.
After creating 1,164+ pages for my website, which has not yet been uploaded, I was doing a round of pre-upload spelling, code validations and link checks but could not get check spelling to work, no matter what I did it just wouldn’t highlight on the text dropdown menu nor could I use the keyboard short cut to initiate it. The pages were saved as .htm which is functionally the same as .html. I tried saving a test page as .html but is made no difference.
All other fesatures worked and the code was recognised, previewing in a browser was fine, no problems there but I still couldn't check spelling in DW CS3.
I knew it would be something stupid on my part… well I was right. This must have happened when setting up the first page for the site, and was experimenting until I got it to look right and feel that way I wanted, I saved it and have used it at the ‘authoritative source’ or ‘template’ for all pages created. First I created the template from it I created a template for each of the major sections of the site. From them I have created all 1,164+ pages to date...
I’ve sent this problem to every webhead that I know … I’ve even took it to work and had a couple guys there look at it. No one had any idea, I think it’s because it was so simple everyone had looked right past it. I finally did a bit-by-bit comparison with another test site that spl chk worked on and even then I missed it because I was ignoring the automatically generated stuff up at the top.
At the very top of the code:
<!DOCTYPE htmPUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
It is supposed to be:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html lang="en">
At the bottom of the code:
</htm>
It is supposed to be:
</html>
Even though you can save this page as a ‘.htm’ file, the HTML notations have to be included. Take them out and guess what: ‘check spelling’ disappears. Why spelling does that but everything else still works… who knows, but it does!
I’ve already made the correction to all pages. Now I can forgo checking all 1,164 pages by hand (or cut-n-past into word) and now I can get the spelling, validation and link checks done so I can do the initial upload for this site.
(I really wish you could check all "text" spelling for the site and spelling corrections as you type were offered... I did put in a request)
So WOOO HOO!

I'm not sure about what you mean but i do know that if you
run the installation from your hard drive you don't need a disk or
you could get the CS4 trial from Adobe.com and install with the key
that came with CS4.

Check printing issue when vendor in Arabic and other in english are used

We are facing a scenario in which when we try to print two checks (one in arabic and the other in english) , the amount in words for english is creating alignment issue . Like 54647.08 in words would be fifty four thousand six hundred fourty seven and eight / hundred of the currency . But it is getting displayed as 'and eight / hundred of the currency fifty four thousand six hundred fourty seven .This issue is coming only when the english check comes after arabic one and not vice-versa and also when the amount in words is bigger (not in case of amounts like 70000 )

Hi
Try to use CALL FUNCTION 'SPELL_AMOUNT' Currecny Key = "USD" irrespective of the currency and then based on the country key or langauge Concatenate the Currency to the SPELL AMOUNT..
surya

Check Report Issues

I am running into an issue and was wondering if anyone has seen this.
If you load the location right now it is in balance and you should get a valid check report.
If you change the mapping on an account to purposely get an out of balance you should get a Fail on the check report
Then if you put the mapping back and load should should get a balanced check report.
We were not having success with this. FDM would give us the previous loads check report, but if it is ran again a second time it gives the correct check report.

Do you have multiple HFM App servers? This sounds like a clustered server issue, and you should try enabling "Sticky Servers" which makes FDM stay on the same server once you connect. It's a very easy option and theres some documentation on it in the admin guide.

Quicken & Quickbooks Check Printing Issues

I have two issues:
Office Issue – I can only print single checks. I CAN’T print partial two page checks or a full page. Had no problems until I had to replace my printer.
QuickBooks Pro 2009, Vista Home Premium – 64 bit & HP 1505
Home Issue – I can only print full pages (3 on a page checks), I CAN’T print single or partial (2 on a page) checks. The printing starts about 2 ½ inches into the check. Adjustments via QB are not sufficient to correct. Had no problems until I upgraded the computer.
Quicken 2009, Windows 7, HP 1022
I have tried downloading new drivers.
Any help is appreciated.

Hello,
Thanks for the post. With this one, I might recommend following the links below and posting this question there. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Check lot issue..

Dear Experts,
At my client place client want to extened check lot chars upto 10 digitis but in sap it takes 7 only
please provide your inputs..
With Best Regards,
Satish

You might get this error message while creating a new lot, you can change this message to 'S' (Note in footer) or completely switch off message in change message control, transaction OBA5.
Check the format of the check numbers
Message no. FIBL664
Diagnosis
A check number consists of a numeric character string, but can contain a non-numeric prefix (CH000014) or suffix (000014X).
The structure of the check number entered does not correspond to the other check numbers of the bank account. There could be discrepancies in the length, the prefix, or the suffix.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
In Customizing, choose Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
Regards,
Ganesh

Check Run Issue

Hi Guru's,
HI Guru's,
I have a an issue with the check run. Created a check run yesterday and went through all the steps...
- Parameters have been entered
- Payment proposal created
- Payment run has been carried out
- Posting orders 77, generated, 77 completed.
*- Printing Data and log have been deleted *
I can not remember what I click on and it caused this.
Please can someone help and tell me know how can I either re-run this check run I mean the physical checks or how can I go about this and delete this run and re-run from Scratch.
Best Regards,
Yasmeen

You could try going to tcode SE38 and then execute RFFOUS_C program from there.
Select your check variant, enter the same program run date and ID that produced your 77 checks.
Look over your print controls to make sure hte correct printer is populated.
Scroll down to the very bottom of the screen and check "Void and reprint checks from payment run already printed."
Enter the Check Numbers that was produced before.
Enter a Void Reason Code.
Hope that helps.
Cindy

OMNI portlet preference store issue

Hi,
Application is running on Staging environment and I want to move it to UAT clustered environment. Portlet application as well consumer application (Portal) deployed successfully. After that I have run persistancemigration tool for WSRP portlet preferences and copy them to UAT. At this stage, my portal and WSRP/JSR portlet start running. After that i tried to run migration tool to export omni portlet preferences in following way:-
1. I have set classpath for MigrationTool.
2. Test the classpath as follow:-
C:\>echo %classpath%
.;D:\Program Files\J-Integra\Exchange\lib\jintegra.jar;D:\Program Files\J-Integr
a\Exchange\lib\cdo.jar;.;D:\Program Files\J-Integra\Exchange\lib\jintegra.jar;D:
\Program Files\J-Integra\Exchange\lib\cdo.jar;D:/OracleAS/OracleSOA/jdbc/lib/ojd
bc14dms.jar; D:/OracleAS/OracleSOA/portal/jlib/pdkjava.jar; D:/OracleAS/OracleSO
A/portal/jlib/ptlshare.jar;
3. When i run the command its giving me ClassDefFoundErrro error:-
C:\>java oracle.portal.provider.v2.preference.MigrationTool -mode filetofile -pr
ef1UseHashing true -pref1RootDirectory D:/OracleAS/OracleSOA/portal/portletdata/
tools/omniPortlet -pref2RootDirectory D:/temp/omni
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/portal/provide
r/v2/preference/MigrationTool
I have also run above command in this way but its also not worked for me:-
set classpath=D:/OracleAS/OracleSOA/jdbc/lib/ojdbc14dms.jar; D:/OracleAS/OracleSOA/portal/jlib/pdkjava.jar; D:/OracleAS/OracleSOA/portal/jlib/ptlshare.jar
java oracle.portal.provider.v2.preference.MigrationTool -mode filetofile -pref1UseHashing true -pref1RootDirectory D:/OracleAS/OracleSOA/portal/portletdata/tools/omniPortlet -pref2RootDirectory D:/temp/omni
Kindly do let me know what is the issue?
2ndly, i copied omni portlet preferences (without running above tool) and pasted in UAT environment, OC4J is throwing following exceptions when i called them from Portal:-
HTTPClient.HTTPConnection
java.lang.ClassCastException: HTTPClient.HTTPConnection
at
oracle.portlet.client.connection.web.WebProducerRuntimeAdapterImpl.doHttpClientCall(WebProducerRunti
meAdapterImpl.java:402)
at
oracle.portlet.client.connection.web.WebProducerRuntimeAdapterImpl._showPortlet(WebProducerRuntimeAd
apterImpl.java:188)
at
oracle.portlet.client.connection.web.WebProducerRuntimeAdapterImpl.showPortlet(WebProducerRuntimeAda
pterImpl.java:156)
at
oracle.portlet.client.connection.web.WebProducerInteraction.showPortlet(WebProducerInteraction.java:
130)
at oracle.portlet.client.techimpl.web.WebPortletRenderPipe.pre(WebPortletRenderPipe.java:84)
at oracle.portlet.client.service.pipeline.PipeContext.internalExecute2(PipeContext.java:519)
at oracle.portlet.client.service.pipeline.PipeContext.internalExecute(PipeContext.java:406)
at oracle.portlet.client.service.pipeline.PipeContextRunnable.run(PipeContextRunnable.java:23)
at
edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:431)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at
oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolE
xecutor.java:398)
at
oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecu
tor.java:423)
at java.lang.Thread.run(Thread.java:595)
I have also changed the connection.xml to point to some stagin server URL where these omni portlets are running but having same exception. What can be the issue?
Thanks in advance.
Regards,
Imran

This issue is related to the Shared library in th server.xml. I also had the same issue. the import for oracle.http.client shared library would be missing in your oracle.wsrp shared lib description.
Update that and you will be free of this error

Credi Check Management issue - FSCM

Hi guru's
We have a issue in FSCM. We have defined a business partner in TC:BP and credit limit has been defined 5000 $ but when i am doing sales order for 15000$ system is not asking any credit check message. It was auto released for this SO only. Usually when we create SO system should check credit limit before saving it. but in our case system does carry any credit limit check even though it was higher than the limti defined. what could be the reason?
Can anybody send your advices/thoughts on this issue
Regards,
Krishna

Hi Krishna,
Please check following points:
1. Check the credit process configured i.e. Item category, Assignment of Sales Order type or Delivery order type to CM, automatic credit control
2. Check confirmed qty in the schedule line item of Sales Order
3. Check Credit Master data of the customer - T code FD32
Thanks & Regards,
Santosh

Contribtution portlet check in issues

Similar Messages

Maybe you are looking for