Contribute and ISA 2004
Has anyone managed to get COntribute to work form behind a
ISA 2004 friewall/prxy serevr? If so how was ISA set up?
Thanks
martion
Check the link it might help.
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800b12b5.shtml
Similar Messages
-
Windows 7 updates fail behind SBS 2003 and ISA 2004
Windows 7 update is failing with 'Code 80072EFD'. I am using SBS 2003 with ISA 2004. We just recently updated the client machine from Windows XP. WSUS is completely disabled from SBS 2003 and all updates are download directly from windows
update server. Updates were working fine before we updated the machine to Windows 7.
How can I fix updates for the Windows 7 machine?Hi,
Based on your description, please refer to following article and check if can help you.
Windows Update
error 80072efd
If any update, please feel free t let me know.
Hope this helps.
Best regards,
Justin Gu -
Exchange 2010, Outlook Anywhere, Autodiscover, SAN Certs and ISA 2004
Hi
Everything I have read says that SAN certs do not work with ISA 2004. However I have read through the "White Paper: Understanding the Exchange 2010 Autodiscover Service" document to understand my options (url below) and notice that the SAN
cert option in the "Summary of supported scenarios for connecting to the Autodiscover service from the Internet" section implies that ISA 2004 may be able to work:
"Requires additional configuration if used together with either ISA Server 2004 or ISA Server 2006"
http://technet.microsoft.com/en-us/library/jj591328(v=exchg.141).aspx
Does anyone know if there is a supported ISA 2004 scenario where SAN certs can work?
Thanks!It's highly doubtful, since ISA 2004 has been in extended support for two years. See
http://blogs.technet.com/b/isablog/archive/2009/10/05/mainstream-support-ending-for-isa-server-2004-standard-edition-sp3.aspx for details about ISA 2004 support - it goes totally out of support next year. -
I can't get this to work to save my life...not that I'm an
ISA expert...but it's pretty straight forward.
I can't get folders to be returned to CF Studio or
Dreamweaver from a server with ISA 2004 on it. It's publishing
pages perfectly and I have the LAN connection set up...but it's at
a datacenter and I have to rds to work on the pages.
Has anyone had a problem with this before or know (even
better) of how RDS fits into ISA?
Thanks a lot,
ChrisThe answer for me was to uncomment the RDS servlet sections
in the
web.xml file on the server. -
SBS 2003 R2 premium (with ISA 2004) Exchange ActiveSync not working
A client has a SBS 2003 R2 premium (with ISA 2004) and wants to sync iPhones and Android phones.
When using the Microsoft Remote Connectivity Analyzer and selecting 'Exchange ActiveSync' we get 'The test of the FolderSync command failed. Exchange ActiveSync returned an HTTP
500 response.'
We tried every solution we could find on the internet, without success.
This is what we tried and checked so far:
- fixed IP, DNS, trusted SSL (comodo) seem all OK
- Exchange 2003 SP2 and ISA 2004 SP3 installed.
- RWW and OWA working fine.
- tests with iPhone and Android -> 'cannot get mail. The connection to the server failed'.
- event viewer reveals no further clues.
- ran CEICW several times enabling and disabling most remote options (OWA OMA,...)
- manually checked all vDir settings in IIS6
- tested with different accounts, created a testaccount without any administrative privileges in Active Directory.
- surfing to servername/microsoft-server-activesync from local network and to domain/microsoft-server-ActiveSync from external computer both give: HTTP 501/HTTP 505 error as expected.
- reset the default virtual directories
- on ISA a query by dest port (443) shows traffic reaching the ISA server ending in:
Log type:
Web Proxy (Reverse)
Status:
500 Internal Server Error
Rule:
SBS OMA Web Publishing Rule
Source:
External ( XX.XX.XX.XX:0)
Destination:
( XX.XX.XX.XX:443)
Request:
POST
Filter information:
Req ID: 1c6d0bea
Protocol:
https
User:
anonymous
Could anyone give me any pointers on what I need to do to get this working please?
Many thanks in advance for your assistance.
Regards
Jean-Paul Laffargue
ARCOM BVBAI used to have a SBS2003 on ISA running activesync with no issues so I'll try and give you guidance although it's been a while. I gather this is the first time use of this feature on this SBS? If so make sure you follow the instructions here:
http://technet.microsoft.com/en-us/library/cc182239.aspx
Also make sure you've enabled all mobile services in exchange features and updated your users with the Mobile User profile (I think they need to be members of the Mobile and Remote Web Workplace groups in Manage Users IIRC). Anything in the event logs?
Also, for some phones you need to manually download the certificate if you use a self-signed type.
Note that in the end it may be time to replace this soon to be unsupported ISA with a separate firewall (or a "free" Untangle box) and go to a one NIC solution. It simplifies things and you need to do that anyway to transition off SBS2003 when it is
unsupported next year.
-- Al -
Trex 7.0 and ISA 5.0 Config guides
Hi
Can some tell me where to get Trex 7.0 and ISA 5.0 Config guides. I see significant changes here from Trex 6.1 ans ISA 4.0.
Thanks in advance,
Biren BugatiYOu can the TREX guide under the path
http://service.sap.com/instguides
Browse to
SAP Netweaver -- Release 2004s -- Installation -- (on right hand side) -Installation standalone engines -- installation search and classification TREX.
Hope this helps,
Chetan
Giving points would mean saying Thanks in SDN -
Unable to connect to internet using DHCP with WRT54G behind ISA 2004
Hello,
For starters, the Linksys WRT54G is located behind the ISA 2004 Sever firewall. The gateway for the LAN and internet segment is set at 192.168.1.1 and 192.168.2.1 for the WLAN segment on the ISA box. All the proper network rules and access rules have been created. If I set the adapter card on the lap top with a static IP, e.g. ip address as 192.168.2.3, subnet mask: 255.255.255.0 default gateway: 192.168.2.1 and primary DNS: 192.168.1.1 the lap top can connect to the internet through the WLAN segment. At this point the WRT54G is set for internet connection type as automatic configuration DHCP, local IP address as 192.168.2.2 subnet mask as 255.255.255.0 and DHCP server disabled
When using DHCP on the WRT54G by enabling it and setting the Starting IP address to 192.168.2.3, I cannot connect to the internet. When using the CMD prompt and doing a ipconfig /all this is the result
I get DHCP enabled: yes
Autoconfiguration Enabled: yes
IP Address: 192.168.2.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.2
DHCP Server: 192.168.2.2
DNS Server: 192.168.2.2
Is it possible to configure the WRT54G so that the default gateway can be set? Each time I change the Local IP address of the WRT54G e.g. 192.168.2.10, the default gateway gets the same IP address.
Any help would be much appreciated.
Thanks
KarlIn the 54g, setup an extra route to the other default gateway.
ie; route 192.168.2.2 mask 255.255.255.2 gate 192.168.2.1 -
I have developed a site for a client in Dreamweaver using css
for font styling. I also use Tab Bar Magic from Project Seven,
which has it's own css file. My client uses Contribute and only the
css menu. He is confused with so many style options and starts
using the P7TBM styles, which do not work right for our content. Is
there any way to hide a css style sheet in Dreamweaver or ???
RJIf you put the PVII code in a template in a noneditable
region and then
attach the PVII style sheet to the template only ... do the
PVII styles
still show up in the Contribute child pages?
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"maydayvm" <[email protected]> wrote in
message
news:e2rg8m$br2$[email protected]..
>I have developed a site for a client in Dreamweaver using
css for font
>styling.
> I also use Tab Bar Magic from Project Seven, which has
it's own css file.
> My
> client uses Contribute and only the css menu. He is
confused with so many
> style
> options and starts using the P7TBM styles, which do not
work right for our
> content. Is there any way to hide a css style sheet in
Dreamweaver or ???
>
> RJ
> -
ITunes behind an ISA 2004 Firewall
Since upgrading to iTunes 6.0, I can no longer access the Music Store or any of the streaming radio stations. Installation went fine.
When attempting to go to Music Store, I get the following error: iTunes could not connect to the Music Store. "An unknown error occurred (502). Make sure your network connection is active and try again."
Seems that something has changed in the 6.0 release, thus causing me to have to reconfigure my ISA 2004 Enterprise firewall rules.
I currently allow the following outbound TCP ports:
3689
42000-42999
8000-8999
9022
What's changed, and does anyone else run ISA 2004 and iTunes successfully?
I understand that there may be some proxy settings in QT that get picked up and used by iTunes? Can anyone clairify?hi Ashley!
Only problem: I'm not using the Firewall Client -- I'm doing all access via the web proxy.
hmmm. i've seen some versions of this caused when servers on a network aren't exempting the following domains:
phobos.apple.com
phobos.apple.com.edgesuite.net
the following text is from a post by Robert Eckdale:
I wanted to share my experience with connectivity issues to the iTunes Music Store. I am including some background info in this post... so it's admittedly a bit long-winded.
Users on my network were receiving the following error when attempting to connect to the iTunes Music Store (IMS):
"We could not complete your Music Store Request. An unknown error occured (502).
There was an error in the Music Store. Please try again later."
At first it seemed likely this was an IMS service outage, and given that IMS isn't a business critical app, I set it aside for a couple of days. When the issue still existed 3 days later it became apparent this was likely related to our firewall security configuration.
I performed a packet capture on a workstation while iTunes attempted to connect to IMS. Sure enough the results indicated that the request was rejected by the firewall's HTTP filter.
The firewall/proxy being used is Microsoft Internet Security and Acceleration Server 2004. (ISA 2004) One of the benefits of ISA is its advanced application-layer security. I won't get into the details, but if you want more info a good place to start would be http://www.microsoft.com/isaserver.
The next thing to determine was the specifics of the HTTP request and the cause for rejection. On the ISA server I setup a logging query that monitored live traffic from my test workstation for connections denied due to various HTTP filter values. The query indicated that the request was being denied because the HTTP traffic was encoded, thus not allowing the traffic to be inspected. Not sure why Apple is encoding HTTP traffic, but that’s another discussion.
So the solution: (It’s about time…right?) On the ISA server I created the following Domain Name Set:
Name: iTunes Music Store
Domain names included in this set: *.phobos.apple.com and *.phobos.apple.com.edgesuite.net.
I then created an Access Rule with the following properties:
Action: Allow
Protocols: HTTP (Disabled the Web Proxy application filter.)
Source: Workstations (This is just a group of IP’s used by our workstations)
Destination: iTunes Music Store (The Domain Name Set I created earlier)
I placed this new access rule “above” the default HTTP rule used by our workstations. This results in the new rule being processed first. So, if a workstation makes an HTTP request, the ISA server determines if its destination is to either of the domains used by IMS. If it is, the request is allowed and no application layer filtering is applied. If the destination of the request is not to either of the IMS domains, it is allowed but HTTP application layer filtering is applied.
There might be better ways to do this, but it seems like an acceptable solution. The security trade-off is that if there were an HTTP exploit used at either of those IMS domains my users would not be protected.
Eckdale post ends
love, b -
I am using Captivate 2.0 and trying to make a SCORM content
that will report user interaction in the new Fronter 7.1
(www.fronter.com). I use the reload SCORM 1.2 player for complaince
check, since I do not have one for SCORM 2004 (
http://www.reload.ac.uk/scormplayer.html)
I have created a test cp file with just one question and 7
slides. I pack the output in .zip with SCORM 1.2.
When loading into the reload player I get the error message
Problem validating manifest
(file:C:/Documents%20and%20Settings/Martin/reload/reload-scorm-player/server/webapps/reloa d-scorm-player/course-packages/22/imsmanifest.xml:
12, 92): cvc-complex-type.3.2.2: Attribute 'xsi:schemalocation' is
not allowed to appear in element 'lom'.
I can see the .xml manifest from Captivate and line 12. The
manifest is posted at the bottom of this page.
Now when I use the LMS system fronter 71, which has SCORM
2004 and SCORM 1.2 support, the whole package loads and reports
pass/fail but not the user interactions. Fronter 71 has support for
this, and I would like to know what I have done wrong. I tried both
SCORM 1.2 and SCORM 2004.
Here comes the manifest for scorm 1.2 and then afterwards for
scorm 2004
<?xml version="1.0" encoding="utf-8" ?>
- <manifest identifier="testthree" version="1.0" xmlns="
http://www.imsproject.org/xsd/imscp_rootv1p1p2"
xmlns:adlcp="
http://www.adlnet.org/xsd/adlcp_rootv1p2"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="
http://www.imsproject.org/xsd/imscp_rootv1p1p2
imscp_rootv1p1p2.xsd
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1
imsmd_rootv1p2p1.xsd
http://www.adlnet.org/xsd/adlcp_rootv1p2
adlcp_rootv1p2.xsd">
- <metadata>
<schema>ADL SCORM</schema>
<schemaversion>1.2</schemaversion>
- <lom xmlns="
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xsi:schemalocation="
http://www.imsglobal.org/xsd/imsmd_rootv1p2p1
imsmd_rootv1p2p1.xsd">
- <general>
- <title>
<langstring
xml:lang="x-none">testfour</langstring>
</title>
- <catalogentry>
<catalog>Adobe Captivate Course</catalog>
- <entry>
<langstring
xml:lang="x-none">testthree</langstring>
</entry>
</catalogentry>
- <description>
<langstring xml:lang="x-none">min description
ML</langstring>
</description>
- <keyword>
<langstring xml:lang="x-none" />
</keyword>
</general>
- <lifecycle>
- <version>
<langstring xml:lang="x-none">1.0</langstring>
</version>
- <status>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">Final</langstring>
</value>
</status>
</lifecycle>
- <metametadata>
<metadatascheme>ADL SCORM 1.2</metadatascheme>
</metametadata>
- <technical>
<format>text/html</format>
<location>.</location>
</technical>
- <educational>
- <typicallearningtime>
<datetime />
</typicallearningtime>
</educational>
- <rights>
- <cost>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">no</langstring>
</value>
</cost>
- <copyrightandotherrestrictions>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">no</langstring>
</value>
</copyrightandotherrestrictions>
</rights>
- <classification>
- <purpose>
- <source>
<langstring
xml:lang="x-none">LOMv1.0</langstring>
</source>
- <value>
<langstring xml:lang="x-none">Idea</langstring>
</value>
</purpose>
- <description>
<langstring xml:lang="x-none">min description
ML</langstring>
</description>
- <keyword>
<langstring xml:lang="x-none">Adobe
Captivate</langstring>
<langstring xml:lang="x-none" />
</keyword>
</classification>
</lom>
</metadata>
- <organizations default="testthree_ORG">
- <organization identifier="testthree_ORG">
<title>testfour</title>
- <item identifier="testone" isvisible="true"
identifierref="testone_RES">
<title>testtwo</title>
<adlcp:maxtimeallowed />
<adlcp:datafromlms />
<adlcp:masteryscore>80</adlcp:masteryscore>
<adlcp:timelimitaction>exit,message</adlcp:timelimitaction>
</item>
</organization>
</organizations>
- <resources>
- <resource identifier="testone_RES" type="webcontent"
href="cap2 1-2.htm" adlcp:scormtype="sco">
<file href="cap2 1-2.swf" />
<file href="cap2 1-2.htm" />
<file href="SCORM_support/scorm_support.htm" />
<file href="SCORM_support/scorm_support.js" />
<file href="SCORM_support/scorm_support.swf" />
</resource>
</resources>
</manifest>Here is the one for scorm 2004
<?xml version="1.0" encoding="UTF-8" ?>
- <manifest identifier="tthree" version="1.3"
xmlns="
http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="
http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="
http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="
http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="
http://www.imsglobal.org/xsd/imscp_v1p1
imscp_v1p1.xsd
http://www.adlnet.org/xsd/adlcp_v1p3
adlcp_v1p3.xsd
http://www.imsglobal.org/xsd/imsss
imsss_v1p0.xsd
http://ltsc.ieee.org/xsd/LOM
lomStrict.xsd">
- <metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
- <lom xmlns="
http://ltsc.ieee.org/xsd/LOM">
- <general>
- <identifier>
<catalog>Adobe Captivate Course</catalog>
<entry>tthree</entry>
</identifier>
- <title>
<string language="x-none">tfour</string>
</title>
- <description>
<string language="x-none">min description
ML</string>
</description>
- <keyword>
<string language="x-none" />
</keyword>
</general>
- <lifeCycle>
- <version>
<string language="x-none">1.0</string>
</version>
- <status>
<source>LOMv1.0</source>
<value>final</value>
</status>
</lifeCycle>
- <metaMetadata>
- <identifier>
<catalog>test</catalog>
<entry>test 1000</entry>
</identifier>
<metadataSchema>LOMv1.0</metadataSchema>
<metadataSchema>SCORM_CAM_v1.3</metadataSchema>
</metaMetadata>
- <technical>
<format>text/html</format>
<location>.</location>
</technical>
- <educational>
- <typicalLearningTime>
<duration>PT0H0M</duration>
- <description>
<string language="x-none">Average length of time to
experience this
Adobe Captivate Project.</string>
</description>
</typicalLearningTime>
</educational>
- <rights>
- <cost>
<source>LOMv1.0</source>
<value>no</value>
</cost>
- <copyrightAndOtherRestrictions>
<source>LOMv1.0</source>
<value>no</value>
</copyrightAndOtherRestrictions>
</rights>
- <classification>
- <purpose>
<source>LOMv1.0</source>
<value>idea</value>
</purpose>
- <description>
<string language="x-none">min description
ML</string>
</description>
- <keyword>
<string language="x-none">Adobe
Captivate</string>
<string language="x-none" />
</keyword>
</classification>
</lom>
</metadata>
- <organizations default="tthree_ORG">
- <organization identifier="tthree_ORG">
<title>tfour</title>
- <item identifier="tone" isvisible="true"
identifierref="tone_RES">
<title>ttwo</title>
- <imsss:sequencing>
- <imsss:objectives>
- <imsss:primaryObjective objectiveID="PRIMARYOBJ"
satisfiedByMeasure="true">
<imsss:minNormalizedMeasure />
</imsss:primaryObjective>
</imsss:objectives>
</imsss:sequencing>
<adlcp:dataFromLMS>.</adlcp:dataFromLMS>
<adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
</item>
</organization>
</organizations>
- <resources>
- <resource adlcp:scormType="sco" identifier="tone_RES"
type="webcontent" href="cap2 2004.htm">
<file href="cap2 2004.swf" />
<file href="cap2 2004.htm" />
<file href="SCORM_support/scorm_support.htm" />
<file href="SCORM_support/scorm_support.js" />
<file href="SCORM_support/scorm_support.swf" />
</resource>
</resources>
</manifest>
Please help -
Release dates of nteweaver 2004 and netweaver 2004's and XI 3.0 and PI 7.0
Hi,
i would like to know the information of the following:
release dates of NetWeaver 2004 and NetWeaver 2004's and SAP XI 3.0 and SAP PI 7.0
kalyan.Kalyan,
NetWeaver 2004 released on April 2004.
source -http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/PrintEdition-98954086245278b01-int/-1/articleContainer-1887240879c3b1916e
NetWeaver 2004's released on June 2006.
Source -/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
Best regards,
raj. -
I was wondering if it is ok to work back and forth between
Dreamweaver and Contribute, also, I was wondering if I need to
change my ftp connection do I just need to make a new connection
key in contribute and also make a new connection to the server in
dreamweaver? I'm making a site for a client and they haven't
decided if they are going to host it or if we are going to host it.
If they decide to host it I'm going to have to change my whole
connection and I'm just wondering if I'm going to be able to do
this.I would use containers outside the editable region to help
control styles. For example, if you wanted a styled list, but
wanted Contribute to work well with it, you could do something like
the following. Tables are also useful to use because they are
easier to edit in Contribute. You could also redefine p tags, h1-5
tags, li tags, etc. per div container.
#my-container{
/* any styles this may need */
#my-container ul{
/* any styles for the ul tag */
#my-container ul li{
/* any styles for the li tag */ -
I want to upgrade to snow leopard from 10.5.8. Im hesitant to proceed because I'm running iPhoto 7 and word 2004. I want to be sure these programs will still run and I won't lose my photos or the events I have ordered them by. Should i make a partition on my new Iomega external and clone it just in case? I'm running time machine and backing up all the time onto an old LaCie, and right now I have a copy of my iPhoto library on new Iomega, which I recopy every couple of weeks. I got the computer new several years ago and it came with iLife and 10.4 OS I think.
Word 2004 is almost 10 years old, you will not be able to upgrade beyond Snow Leopard with it. IMHO you have gotten your money's worth out of the application and need to upgrade to Office for Mac 2011, this will work just fine and read your old files just fine too. What will not run beyond SL are all PowerPC (PPC) apps such as Word 2004. You will need to update, upgrade or replace any PPC based apps you want to use. I would recommend taking a little time and check for updates to each of your apps. Then open System Profiler (Applications - Utilities - System Profiler) click the Applications link on the left and then look for any PPC based apps, those are the ones that will not run. You can upgrade to SL just fine with the apps you currently have however if you want to go beyond SL (it's already 2 generations behind) you will need to update or upgrade your apps. You can take your time doing it but eventually you're going to have to begin
-
Flash CS 4 and Dreamwaver 2004
Version:1.0 StartHTML:0000000216 EndHTML:0000011957 StartFragment:0000002400 EndFragment:0000011921 SourceURL:file://localhost/Users/kenneth/Desktop/PROBLEMS%20WITH%20FLASH%20CS4%20AND%20DR EAMWEAVER%202004.doc
PROBLEMS WITH FLASH CS4 AND DREAMWEAVER 2004
1. Buttons; When flash button is selected and modifications for the button are complete I get an unknown error message.
( see attachment; unkown error jpg)
2. Flash animations; When a flash animaton is selected from the assets panel of Dreamweaver the animation works fine both in Dreamweaver and in browsers.
3. Image Viewer; When the image viewer is opened the image viewer window opens. When images are loaded into the viewer and captions are added they appear to work in Dreamweaver but they don’t move in sequence when the buttons are clicked. In browsers the captions don’t appear. If the window is closed and reopened all of the images have disappeared and just the image viewer returns.
The response I got from an inquiry to Adobe was; “The version of Dreamweaver has been discontinued and is no longer supported via phone or web cases. We only support versions CS3 andCS4 via telephone or web.
Is it possible to have interoperability between these two programs? If so, how do I get it?You appear to be discussing features built-in to Dreamweaver that involve Flash content, so you may get better information from the Dreamweaver forum in regards to using these feaures.
It is unlikely that Dreamweaver 2004 would be compatible with Flash CS4, though compatibility is not really an issue since Flash has little use for Dreamweaver to do nything it needs to, and Dreamweaver is pretty much just a fancified text editor, where if you needed to incorporate Flash CS4 content you could have Flash publish the html code and then paste that code into the html file in Dreamweaver. -
Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?
I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
anitabean wrote:
Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
Crossing my fingers and loading Leopard....
Cheers.
Maybe you are looking for
-
Firefox continually crashes when started up.
I open Firefox, and it crashes 5 seconds later. During those five seconds I click on 'Restore' and then it still crashes. After a few crashes I get the option to start in safe mode or restart, when I open in safe mode it still crashes. I haven't trie
-
Error while creating rule policies in rule builder
hi all , We are using CRM 7.0 , we are configuring territory management using building block ( C06 ). In territory management while configuring territory atributes through WEB UI , I am facing a problem in step no. 4.5.3 of building block (C 06) whic
-
PDF modified while opened in preview
Here is a weird behavior (bug) for 10.6. When a pdf file is modified outside while it is opened in Preview, now Preview automatically shows the first page. (The behavior for Leopard was showing the updated pdf in the current page.) This new behavior
-
Mass deletion of Batch specific unit of measure
Dear Experts, How to delete the batch specific unit of measure in the material master maintained in the additional data -unit of measure and proportional / production unit of measure in mass . We have some 1000 material for which we want to remove th
-
Maintain Sequence During Bulk Import
I'm doing 'Mass Import' in transaction SOLMAN_WORKCENTER->START_IMPORT for a CTS project. But, I noticed that it triggers all the transports at once and import depends on the size of objects in the transport and not sequence. For example, if I've the