Contribute CS3 will not publish Flash Player

A few months ago the company I work for bought Contribute CS3
to edit our website. The homepage of our website contains a Flash
Player file. When I edit and publish this homepage Contribute will
not publish the Flash Player file this section just shows up blank
stating movie not loaded when I bring up our website. The same
thing happens even when I do a 'send for review' before I actually
publish the page. I have administrator rights through Contribute to
edit this website therefore I am confused as to why Contribute will
not publish this Flash Player file. I have also tired to reinsert
the Flash file while editing in Contribute and still the file will
not publish. Would anyone know why this would happen?
Thanks!

Is this occurring with other Web CS applications or only with
Contribute CS3? For general troubleshooting of Web CS products
please go here
http://www.adobe.com/go/kb401401
If this does not address your issue, submit an incident
request via the product support page
http://www.adobe.com/support/contact/

Similar Messages

  • Firefox will not allow Flash player to work. How do I enable Flash to work in Firefox? Thank you.

    Question
    Firefox will not allow Flash player to work. Every site that uses Flash player gives me a message saying that I need to update to the latest version of Flash player, but I have done so, and I keep getting the same message. How do I enable Flash to work in Firefox? Thank you.

    You can hold down the Shift key and double click the Firefox desktop icon to start Firefox in [[Safe mode]].

  • Adobe Reader will not open Flash Player on my iMac

    Hi Folks,
    For some reason I cannot install Flash Player.  I used to have it on my iMac but now don't, maybe I inadvertantly deleted it somehow?
    I've tried re-downloading the app but keep getting the message as below.
    I've even tried copying the download to a Flash drive from my Mac Pro ( on which it works fine) and saving it directly into the Utilities folder on my iMac, still no luck.  When I click on the icon it only comes up with the option to "remove" Flash Player
    Got any ideas?
    Cheers
    Peter

    Hi Peter,
    It appears that somehow Reader has become the default program to open DMG files.  You'll want to open the DMG with DiskImageMounter.app.  DiskImageMounter is found in /System/Library/CoreServices/DiskImageMounter.app.
    Right-click on the DMG installer file and select 'OpenWith'
    This will reveal a menu that should have DiskImageMounter.app listed.
    If DiskImageMounter.app is not listed, select Other... and navigate to /System/Library/CoreServices/DiskImageMounter.app.
    This will mount the DMG revealing the actual installer .app file inside
    Double-click the .app file and proceed with the instructions to install Flash Player.
    You'll actually want to make DiskImageMounter.app the default program to open DMG files so that you don't encounter the same scenario in the future.
    Maria

  • Mac will not update flash player, please advise

    My Adobe Flash Player needs to be updated to 15.0.0.189 but the site will not allow me to download. Says 'Your antivirus software must allow you to install software.' I have a Mac OS X 10.7.5. No antivirus software installed. Checked the forums but can not find any info specific to this issue. Any help would be appreciated! Thanks in advance!

    I don't believe that what you're experiencing is legitimate.  This sounds like an attempt to get you to install malware.  I'm thinking that you may have been tricked into downloading a fake Flash Player.  Let's throw that installer away and start again.
    Download Flash Player from here: http://get.adobe.com/flashplayer
    Follow the on-screen prompts to complete the installation.
    If that gives you trouble please try the alternate installer:
    http://fpdownload.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx. dmg

  • My iMac will not install flash player

    It has downloaded the installer but will not instal the flash player.    My Safari system is 6.0.3

    Hi,
    Could you please download Flash Player from the following link. (from the Download from the direct link section)
    After downloading close all browsers and double-click the file you downloaded: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#install er
    Thanks,
    Sunil

  • It will not let flash player install. How do I fix it.

    My games on Facebook stopped loading and it says that Firefox has disabled flash player. I have tried to re-install and it will not let me. I have un-installed both Firefox and flash player and Firefox still will not let me re-install flash player.

    Found this item it may help
    OK, I have fixed it here. Here's what I did:
    quit iTunes
    trashed ~/Library/Preferences/com.apple.iTunes.plist
    started iTunes, and authorised my account
    Worked straight away after that !

  • IE 9 and 10 will not launch flash player

    This is in regards to my desktop.  About three weeks ago I started having issues with the Flash Player not working when called upon by a website as an add-on to IE 10. So I called Microsoft Support and they did all manner of system restore and now the computer is all hosed up.  One of the things they did do was uninstall IE 10 and reinstall IE 9.  While IE 9 was more stable, IE 9 will not launch the Flash Player either when prompted by a web site.   Flash Player WILL launch if I use Chrome or Firefox. The solution that everyone throws my way is not to use IE, but that doesn't fix the issue of getting IE 9 to luanch the flash player when called upon by a web site. Microsoft seems bamboozled by this and their tech support overseas has no idea how to fix this short of a clean install and startiong over from scratch - which seems like the most likely scenario.  My desk top is running Windows 7 - build 1.  IE Explorer is version 9.0.17.  The machine is a 64 bit Intel Core i7 CPU with 870 at 2.93 Ghz.  AV is ESET, udated, runs everyday.  I have tried putting sites on the on the pop-up blocker allow list and have shut Microft's pop-up block oiff completly with no behavioral change form the computer. I have also disable all of the add-ons and re-enable them, with no change. The most recent version of Flash Player is the one I installed this morning from the adobe web site.

    Does this FAQ help?
    http://forums.adobe.com/thread/885448?tstart=0

  • Will not run Flash player

    I have downloaded Flash Player & said that it was successfuly but if will not run
    I have Vista OS & Kaspersky pure 2.0
    Can you help

    Skyfire and Puffin are alt. browsers
    5 Flash Player Alternatives
    http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/

  • Windows XP with IE8 will not load Flash Player

    I have been trying for about 1 month to download Flash Player. When I down load it it ends with installation error. When I send error report and I get a response it says an application error.Besides me who has a problem; Adobe, Windows, or IE8? Can anyone tell me?

    Hi, To whom are you sending an error report? Go to this Troubleshooting Guide and page down until you see the various errors?
    Which error are you receiving?
    Also were you following the Uninstall/Install procedures from that Guide? If not, what Adobe site were you using?
    Thanks,
    eidnolb

  • Internet Explorer 9 will not recognize Flash Player

    Since I installed an update from Adobe a few days ago, IE 9 will not recognize that I have the most current version (11.0.1.152) Installed.  I have uninstalled it and reinstalled it.  I go to a site that requires Flash and am told I dont have it and need it, I go download and reinstall, still it is not recognized.  It works fine in Chrome, but then I go to the same site in IE 9 and again am told I don't have it and need to install it.  What steps can I take to fix this?
    OS is Vista Business

    http://forums.adobe.com/message/3905371#3905371
    http://forums.adobe.com/message/3887803#3887803

  • Safari will not enable Flash Player.

    I have installed, uninstalled, rebooted, checked forums, and followed all the instructions. I have a Mac operating OS X Mavericks and cannot use Adobe Flash Player. When I select Safari>Preferences>Security, There is no option for me to select "allow all other plug-ins" I have JavaScript enabled but there is no check box to enable Flash Player. I would very much like to access YouTube on my new Macbook Pro. Any help will be appreciated.
    Thanks,
    Dom

    Dom, the Preferences>security appears different between versions.
    Safari 7 (Mavericks) or Safari 6 (Mt. Lion)
    Safari 5 (Snow Leopard)
    Check your System Preferences to be sure it's installed.

  • My imac will not load flash player ... i have loaded it 10000x and it still says i need flash player installed

    Can some one tell me how to load flah player on my I mac i have downloaded it 10000x

    I have had similar problems with both Sprint and Verizon units (Novatel u727 & u760). Solved both by going to provider sites and downloading SW.

  • I am running windows 7 ultimate 64 bit, Why is it that when i got face book and run an application it will not reconise flash player 10 i have installed

    Windows 7 Ultimate 64 Bit

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Any version of Flash (cs3-cs5) will not publish my file..

    Hi all,
    this is the first time i encounter this problem.. I had the problem where a file would not open correctly which was also addressed at this forum. But this one is different. this file was created (from what i remember) in Flash 8, then opened/saved in all possible flash versions for updates in time.
    While it will open just fine, it will not publish. The publish window with the percentage will open up for a split second, then it will close with no messages whatsoever, no actionscript errors, nothing. F12, the same thing again. No possible settings could solve this. I am willing to send the file for testing of course, have tried to publish using Flash cs4 and Flash cs5. I thought of going back to Flash 8 by opening the file and saving to a previous version but as soon as i open the file in Flash cs3 (while the file has been saved as cs3) it will not open the file with an error message that i cannot remember right now.
    So the problem might lie in how Flash cs3 saved the file, but it will open just fine in cs4 and cs5 so the file is not corrupt in any means..
    any ideas?
    George
    p.s. I tried deleting EVERYTHING off the stage and the library and yet it wont publish.. tried copying all frames on another empty file, couldnt publish either...

    Hi,
    Try using different machine

  • Flash CS3 will not launch

    After years of using Flash CS3 on our Windows 7 computer, it would not launch. So we did a system recovery -(everted to factory image), re-installed Windows and updates, installed Flash CS3, then successfully did the license verification. But Flash CS3 will not launch.
    We copied the Flash Icon from the Start Menu to the TaskBar. This is the icon we clicked on to do license verification, but now we can't use it to launch Flash CS3.
    Thanks for any ideas.
    Computer specs:
    HP - Pavilion Elite Desktop
    AMD Phenom™ II Processor
    8GB Memory
    1TB Hard Drive
    Model: HPE-210y
    Window 7 with Service Pack 1; all updates applied as of 10/26/2014
    (I realize Flash CS3 is not meant to work on Win 7, but it has for years on this computer and on a Toshiba laptop, also with AMD processor)

    Well I decided to reinstall OSX to see if that would help,
    and that seemed to fix it. I'm still not sure what the problem was,
    but a fresh install seemes to have fixed it :]

Maybe you are looking for

  • Not able to access the URL for this web service (BPR)

    1. Start SAP Solution Manager and call transaction SICF. 2. Right-click on default_host/sap/bc/solman, for example, and select Enable service. When the service is enabled, additional subgroups are visible. Enabling reveals the URI of the Web service.

  • BlackBerry Bold 9900 - Volume Up button jamed

    Goodday to all my blackberrry 9900 bold is having a problem with it's music volume keys. when i want to increase the the volume of a song, the phone's louderspeaker volume continues to go louder automatically, and  a while later after i already turnt

  • Is updating from Robohelp X5.0.2 to latest version a difficult task?

    I realize this is a pretty subjective question, but for someone who is fairly comfortable using version X5.0.2, would it take a day, or a week, or possible a couple months to update a project that contains three chm files, with hundreds of htm files?

  • Lost Admin Password

    Hello . We lost the Admin Password ....... So I proceeded like this: 1.- Logged into the database as SYSDBA 2.- Changed the APEX user's password, in this occurence the username was: APEX_040000 3.- Once logged as APEX_040000 I set the security group

  • "Finder" does not function after installing Leopard on Mac G5

    After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5. The installation seemed successful, but after restarting the computer I was asked to choose the wirele