Contribute CS4 on Windows 7 64 bit - Attempting to edit existing website results in a blank page

Hi,
I am an IT Tech and not an Adobe Contribute user so my apologies in advance for wrong terminology.
I just installed a new Windows 7 64 bit PC for a client and installed their copy of CS4 Contribute.
When they attempt to edit their website the page being edited ends up blank. We can't work out why.
The same software was on an Windows XP PC and is the same website that they could edit previously without any problems.
Can anyone assist with settings or advice on potential incompatibility issues?
Thanks
Chris

Chris
This one is most likely related to permissions - Contribute simply does not have access to write the temporary file, but still attempts to anyway (resulting in a file being created / cleared on the server, but no actual information being written to the file).
This still appeared to be a problem even when running the application in Administrator mode.
I may get flamed by the super security-concience techs, but this worked for me:
Find the location of the temporary site / draft folder (default is C:\Users\username\AppData\Local\Adobe\Contribute CS4\en_US\Sites)
Select the folders in the "Sites" folder
Right-click one of them and go to "Properties"
Click the security tab and click "Edit"
Add the user "Everyone"
Select the "Everyone" user and check "Full Control"
Hit OK, then OK again
I can't guarantee it will work, but see how you go.
Thanks
Dan

Similar Messages

I am looking for a good program to edit existing websites for about $99.00

I am looking for a good program to edit existing websites for about $99.00 or less, any suggestions?
Thanks,
New MacBook owner.
Martin

Welcome to Apple Discussions!
http://www.barebones.com 's Textwrangler. Use http://www.anybrowser.org/ as a guide for good HTML composition.
If a web editor does not give you power to do full text editing and claims to be WYSIWYG, don't believe it. Chances are, it uses assumed standards of specific browsers, which are not fully http://www.w3.org/ compliant.

Edit existing website

Hi guys,
the last time I tried to add something to my website via the
created Dreamweaver files I managed to completely ruin my website
and had to start from scratch. So this time I'm asking first: How
do I edit my existing files? I specifically wish to add names to
the pages as I forgot to do that and they name show up without
'unnamed' (or something similar) on the Internet. What steps do I
need to take to edit the existing website?
Thank you very much!
;-)

> add names to the pages as I forgot to do that and they
> name show up without 'unnamed' (or something similar)
Do you mean "Untitled Document" ?
That's the title.
In dreamweaver, there is a text box in the center of the top
part of the
Design window.
If you haven't changed anything on the remote files outside
of dreamweaver-
Open dw. change to this "site"
in the files panel, open a file.
Insert a title. save the page
rinse/lather/repeat for other pages.
then do a Find in code for:
Untitled Document
to catch any left.
then upload the files.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Cannot create new page nor website and worse cannot edit existing websites

When I click on File in the menu the only options that work are Setup Google AdSense and Page Setup...
All other options are grey and cannot be accessed. This means that I cannot edit my existing websites which is a major problem.
Any idea? Reinstalling iWeb did not help.

sharked wrote:
Do you have any more thoughts on this?
"A lot of problems can be solved simply by..." Read more in the “Fix iWeb” section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html

InDesign CS4 freezed up and closes when editing existing files

I worked all day yesterday on a new file, layout etc. I went into the file last night to edit it and every time I would try to edit, either copy, move , fitting, it frose and closed.
I have noticed that when I right click my mouse to get the drop down menu to make an edit this is when it freezes.
Please help.. have several projects with deadlines
1

I experienced the similar problem this morning. Only, my InDesign CS4 closes.
I can start InDesign OK, but after I select a file to open it closes after just about two seconds. The same situation is with older files.
There is just one small file that loads fine. (My problem file is 185Mb)
After a few hours of playing with InDesign I moved away from it and removed the updated fonts I installed yesterday evening and everything works fine! It must be something to do with Windows 7 on this machine, because my laptop which runs Vista and CS2 had no problems with updated font.
Now I have to find out what is wrong with my font...

Editing existing website

Hello,
I'm sorry for my ignorance at this, but I'll explain my situation. I am completely new to DreamWeaver. I am attempting to update my fathers business website, which has been outdated for a few years. I have access to the FTP and I was told that DreamWeaver was the best way to edit the site. I am trying to edit certain pages but I can not seem to figure out how to edit the site.
I added the site and FTP to the workspace and have searched around for ways to edit the site pages but I could not figure out how to. I loaded all the files onto to DreamWeaver and under the assetts I see all the pictures, urls in HTTP form, etc..
My question is how to I access the specific url pages in order edit them. Thanks for your help, it's very much appreciated!
Rob

Files panel
DOWN Arrow = GET files from remote server.
UP Arrow = PUT local files to remote server.
In Remote View, double click on an HTML page. DW will ask if you want the dependant files (scripts, images, etc..). Hit 'Yes' to copy them all to your local site folder. Hit 'No' to skip.
Adobe TV - Learn DW CS5 (video tutorials)
http://tv.adobe.com/show/learn-dreamweaver-cs5/
Creating your first web site in DW CS5 - (on-line tutorial)
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Contribute CS4 wouln't recognize my customization

I solved this but am posting it in case it helps someone else. I copied PMModules.js from \Program Files\Adobe\Adobe Contribute CS4\Configuration\Commands to \Documents and Settings\
\Application Data\Adobe\Adobe Contribute CS4\Configuration\Commands I then edited \Documents and Settings\\Application Data\Adobe\Adobe Contribute CS4\Configuration\Commands\PMModules.js so that RUA_TAG_SPECIFIC_ATTRIBUTES, instead of containing ol: { style: 1 }, now contains ol: { start: 1, type: 1 }, so when I import a table from Word having the following Word HTML: Sample Text
it would retain the start attribute. But it doesn't. It still seems to be running Program Files\Adobe\Adobe Contribute CS4\Configuration\Commands I get Sample Text
the same results even if I rename my custom version to PMModules.js_hide and restart Contribute. I finally figured out I have to put the custom PMModules.js in \Documents and Settings\\Local Settings\Application Data\Adobe\Adobe Contribute CS4\\Configuration\Commands and it worked fine.

I found the problem was my clients fonts were all lower case ie "arial" while mine started with upper case ie "Arial" I just mapped to the corresponding fonts on my system.

Contribute CS4 for the PC

Hi there.
We have a client who is using Contribute CS4 on Windows, which they downloaded and installed sometime ago.
They have since lost the original install file and are in need of reloading the software. They have a serial number. Are you able to supply a download link please?
Thanks,
Andy.

Direct Download Links for Adobe Software
Mylenium

Contribute CS4 and CS5 file transfer (publish) problem on Windows 7 64 bit

Have a problem with Contribute CS5 and CS4 on Windows 7 64 bit where upon editing a webiste for example to add a new page (or edit an existing one) and then clicking on "publish" a blank page appears on the website. To explain this further, If i make the required changes to the page and select the option to publish the file later then the file wirtten to the PC appears to be ok and has all the changes, but as soon as I publish it, only a blank page appears on the web server. ie the upload (ftp) process does happen but the content of the page is being stripped out somewhere during the filt transfer process.
I have editied the same site with CS4 on windows XP without any problems.
Any suggestions would be appreciated
Thank you
Chris

I seem to have solved the issue by downloading this install file
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe
which installs successfully.

TS3212 running windows 7 64 bit home premium edition, getting installer error when attempting to download itunes

I'm running windows 7 64 bit home premium edition, getting installer error whenever I attempt to download iTunes. Cannot resolve despite every attempt known to man! Help!

I'm having the same problem and this is my error message:
what do I do?

OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs

on Create Domain Step
I have been trying to install OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs on Create Domain Step.
Java is installed on root director. I have incease the Java Memory to 2084MB. Still hangs. I have also tried software only install and that also fails at Start Admin server step. I have also tried to configure thru Config.bat file and it does not recognize the weblogic server. Any help is appreciated.
Here are the log files.
[2012-05-06T16:38:13.288-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning value:false to variable:WLS_SINGLE_SERVER_INSTALL
[2012-05-06T16:38:13.350-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_HOSTNAME) to:suman-HP. Value obtained from:USER
[2012-05-06T16:38:13.397-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Using custom properties file oracle/as/install/bi/config/consumer.properties
[2012-05-06T16:38:13.709-04:00] [as] [TRACE:16] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] [SRC_CLASS: oracle.as.install.bi.biconfig.BIConfigMain] [SRC_METHOD: doExecute] ENTRY
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning Port: 7001 to: DOMAIN_PORT
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Domain port set to: 7001
[2012-05-06T16:38:17.929-04:00] [as] [WARNING] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Executing a Jaxb workflow ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@fafb2f1
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.startDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@29a5ec1f
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
Ora Install Logs
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space

Hi,
Refer this SR.
SR 3-5457356311: unable to create weblogic domain in windows 7 SP1 home edition 64 bit
Earlier i have face same issues.after 4 attempts its got resolved.make sure below points
static ip set it properly (windows/hots,etc files) make sure u r pc have full permission for installation user
1.Un-install WebLogic from your machine.
2.If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
3.Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
4.Run the installer as follows:
5.Open a command prompt
6.Change directory to \JDK_64\bin folder and execute:
like below,
C:\>cd C:\java\bin
C:\java\bin>java -D64 -Xms1024m -jar E:\Share_DEV\OBIEE11g_Latest\wls1035_generi
c.jar
run it now
Extracting 0%.....
Thanks
Deva

Contribute CS4 only shows browser Window?

Hi All,
I have a bizzare issue that I can't seem to find anyone else having.My Contribute CS4 is only showing the browser window. This means I get no File, Edit, that sort of thing. It is super frustrating because is severly limits what I can do.It also means I can't resize the window, much less move it. It is basically set in size and location (the center of my screen). I have deleted the preferences folder and registry entry to foce them to be rebuilt, but it didn't help at all.
I'm sure this is something simple, but I have tried every key combination I can think of, none seem to be working. I've attached a screen shot so you can see what I'm talking about.
Just as an FYI, I'm running Windows 7.

Hi Kathy,
Yes the menu bar within Internet Explorer is showing. It is frustrating because I literally cannot do anything other than hit ALT+F4 to close the application or click on things showing within the area in the screen shot.
Thanks for the suggestion.
Joel

Trouble installing CS4 in Windows 7 64-bit

Has anybody else had trouble installing CS4 into Windows 7 Pro 64-bit? I had this suite installed in XP (32-bit) and it worked just fine, but it will not install on my new computer. The first time I tried, it got partway in (past the serial number), and then everything locked up. I had to restart the machine twice just to make it let go of the CD!
Someone on a forum suggested copying the disks to the hard drive and installing from there, but this did not work any better, the installation simply fails immediately, and I get an error code 1605. I tried it with the firewall off, and with anti-virus disabled, and I never leave User Account Control enabled. What is going on?

Provide the install logs and exact system information:
Troubleshoot installation with install logs
Working with your Operating System’s Tools
Mylenium

Adobe CS4 under windows 8.1 64 bit?

I've got problems to install my Adobe CS4 under windows 81. 64 bit. It use to run under windows vista 32 bit. Does there any update or plugin exist tio fix this problem?

install using compatibility mode.

Cannot install CS4 in windows 8 - 64 bit machine

cannot install CS4 in windows 8 - 64 bit machine
After you press setup... it starts analyzing system and encounters an error that stops procedure

I´m trying to install CS4 ....
See http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html

Contribute CS4 on Windows 7 64 bit - Attempting to edit existing website results in a blank page

Similar Messages

Maybe you are looking for