Contribute CS4

Can you use Contribute CS4 behind a ISA Proxy?

No. I know it's stupid. There are three outgoing requests
from Contribute.
1) FTP -> this has a proxy setting
2) http / https (in web browser only) --> this can be set
in control panel.
3) https: soap object that goes to CPS -->>>> NO
PROXY setting.
I've asked the same question before, don't except them to
answer it. They seem to just ignore this huge flaw in their
program.
-- to be more clear you can use CPS -- as long as your inside
the proxy but once you are outside the proxy there is no way for
the SOAP object (that contains all the CPS info) to get
inside.

Similar Messages

After upgrading to mountain lion, contribute cs4 did not open

After upgrading to Mountain Lion, I found that Contribute CS4 did not open. In searching for an answer I found the following on the Adobe forum:
"Earlier versions of Adobe Photoshop (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues."
So continuing to search, two days of frustration ensued as I "chatted" with 2 unhelpful Adobe customer support reps, searched unhelpful Apple and Adobe websites and posted my question in various places. Finally I found that the above statement was completely wrong when I received the following from an Adobe staffer:
Mountain LION is not a supported platform for Adobe Contribute CS4. The supported versions are Latest Adobe Contribute 6.5 and Adobe Contribute CS5.X.
And now I have to spend hundreds in order to maintain my website after upgrading to Mountain Lion. I don't even know to whom I should take my complaint, Apple or Adobe. Does this mean I have to research every piece of software I use before upgrading my Mac? At the very least, Mac owners should be forwarned of platform support failures for major 3rd party producers. I'm doing my bit here. How about you taking some responsibility?

I just baught a new imac from the apple store and loaded mountain lion when I got home due to the time it would take there. I then used migration assitant to load CS4 from my mac pro that is using snow lepord. This worked flawlessly. CS4 and Bridge work great. I then downloaded the mountain lion upgrade to my wifes mac pro that was also using snow lepord and once mountain lion was instaled it disabled CS4 compleatly. I will repost the results tomorrow. I believe that I can reinstall CS4 to her mac pro now that she has mountain lion installed using migration assistant from my mac pro since it worked this way with the new imac. I hope this works because I want to upgrade my mac pro to mountain lion but can't afford to lose CS4.

Contribute CS4 on Windows 7 64 bit - Attempting to edit existing website results in a blank page

Hi,
I am an IT Tech and not an Adobe Contribute user so my apologies in advance for wrong terminology.
I just installed a new Windows 7 64 bit PC for a client and installed their copy of CS4 Contribute.
When they attempt to edit their website the page being edited ends up blank. We can't work out why.
The same software was on an Windows XP PC and is the same website that they could edit previously without any problems.
Can anyone assist with settings or advice on potential incompatibility issues?
Thanks
Chris

Chris
This one is most likely related to permissions - Contribute simply does not have access to write the temporary file, but still attempts to anyway (resulting in a file being created / cleared on the server, but no actual information being written to the file).
This still appeared to be a problem even when running the application in Administrator mode.
I may get flamed by the super security-concience techs, but this worked for me:
Find the location of the temporary site / draft folder (default is C:\Users\username\AppData\Local\Adobe\Contribute CS4\en_US\Sites)
Select the folders in the "Sites" folder
Right-click one of them and go to "Properties"
Click the security tab and click "Edit"
Add the user "Everyone"
Select the "Everyone" user and check "Full Control"
Hit OK, then OK again
I can't guarantee it will work, but see how you go.
Thanks
Dan

How to browse, view, open Microsoft Office files in Contribute CS4

To browse or view Microsoft Office files (not Office 2007)in Contribute CS4: (I won't say how long it took me to figure this out!)
Make sure Contribute is closed.
Open C:\Program Files\Adobe\Adobe Contribute CS4\Configuration\ViewableExtTypes.txt
Add doc,xls,ppt to the list, save & close ViewableExtTypes.txt and restart Contribute/
It doesn't work for Office 2007 file extensions.
I put my heart and my soul into my work, and have lost my mind in the process.
Vincent Van Gogh.

//where file is your StorageFile type object of perticular //Office documents i.e. ppt or doc etc
await Windows.System.Launcher.LaunchFileAsync(file);
Please Refer these links
How to open pdf file in Windows Phone 8?
Launcher.LaunchFileAsync
shah
// Please Mark as answer if it is Helpful to you. Thank You

Contribute CS4 only shows browser Window?

Hi All,
I have a bizzare issue that I can't seem to find anyone else having.My Contribute CS4 is only showing the browser window. This means I get no File, Edit, that sort of thing. It is super frustrating because is severly limits what I can do.It also means I can't resize the window, much less move it. It is basically set in size and location (the center of my screen). I have deleted the preferences folder and registry entry to foce them to be rebuilt, but it didn't help at all.
I'm sure this is something simple, but I have tried every key combination I can think of, none seem to be working. I've attached a screen shot so you can see what I'm talking about.
Just as an FYI, I'm running Windows 7.

Hi Kathy,
Yes the menu bar within Internet Explorer is showing. It is frustrating because I literally cannot do anything other than hit ALT+F4 to close the application or click on things showing within the area in the screen shot.
Thanks for the suggestion.
Joel

Contribute CS4 ignores template changes?

First, I'm new to Contribute. I understand the general idea
of what it does and how it works, but I'm clearly out of my element
on how it works with template files.
I'm setup as an administrator on a Contribute CS4
installation on WinXP. I can edit and publish pages with no
problems.
Except this: When I modify the template files for the site
(obtained from the server, modified, and replaced on the server),
the new modifications are not appearing in the newly-published
pages. I've verified that I'm working on the correct template for
the particular page, and I've even made sure to "refresh templates"
a couple times in case that worked. I've even gone so far as to
find the drafts of the pages I've been working on and make sure the
templates stored on my hard drive are properly updated (they are).
Am I wrong to expect Contribute to incorporate updates to the
template file? Am I being a complete bonehead and missing something
obvious (wouldn't be the first time)?
Any help would be appreciated. Thanks!

I've just had to update 100+ template based pages on a
Contribute site. I ended up having to use Dreamweaver exclusively
for the change.
Contribute does not seem to be "aware" of template updates
when you update a template based page. When you edit a page based
on a template that has changed, it doesn't apply the change or give
you any means of applying the change.
Also, when I attempted to use Modify-Templates-Update Current
Page on a page in Dreamweaver using the File-Actions-Edit Page
Source in External Application, Contribute went, well, berserk,
acting like I wanted to change dozens of pages and files in the
site. Lots of manual clean-up after that.
So, I just used only Dreamweaver to update all the pages
based on the template, as well as updating the template itself.
It's possible to "break" a Dreamweaver template by updating the
template with another editor.

Contribute CS4 for Mac crashes

I have Contribute 3 and tried to used it in an Intel Mac and it crashes on launch, so I thought I need an upgrade and last night
I bought Contribute CS4 and I have the exact same problem: It crashes on launch I have to force quit it.
Before I had a Trial version and it worked fine, is when typed in the serial that the trial version froze, so I downloaded a new one
and after installation go fine, then I clicked "Launch the App" and I only get to see the splash window, then it crashes.
A few hours ago I discovered that I need the serial for Macromedia Contribute 3, can someone please tell how I get that serial?
I registered at Macromedia.
Thank you

This is an ongoing problem I was associated with the following thread
http://forums.adobe.com/message/1049444?tstart=0#1049444
but it has been closed because it has been 'answered'! When I searched for this thread I could not find it and I only have it because I found it in an email to myself (almost as if Adobe is trying to hide it!)
I am still having the issues and have had to
delete all reference to Contribute CS4 in Library/Application Support and Library/Preferences.
Relaunch Contribute
Go to Contribute --> My Connections and Check the 'do not connect to websites at startup'
Re do your site Connection
This may work for a while but the problem is certainly not fixed. I manage my school's intranet and have up to 100 people connected. We ahve foolishly just upgraded to CS4!!
Good Luck, hopefully Adobe may reopen the discussion on this matter and actually fix it. Ironically, every time it crashes the Adobe Crash Reporter does not open so Apple get 20 reports from me a day!

Contribute CS4 wouln't recognize my customization

I solved this but am posting it in case it helps someone else. I copied PMModules.js from \Program Files\Adobe\Adobe Contribute CS4\Configuration\Commands to \Documents and Settings\
\Application Data\Adobe\Adobe Contribute CS4\Configuration\Commands I then edited \Documents and Settings\\Application Data\Adobe\Adobe Contribute CS4\Configuration\Commands\PMModules.js so that RUA_TAG_SPECIFIC_ATTRIBUTES, instead of containing ol: { style: 1 }, now contains ol: { start: 1, type: 1 }, so when I import a table from Word having the following Word HTML: Sample Text
it would retain the start attribute. But it doesn't. It still seems to be running Program Files\Adobe\Adobe Contribute CS4\Configuration\Commands I get Sample Text
the same results even if I rename my custom version to PMModules.js_hide and restart Contribute. I finally figured out I have to put the custom PMModules.js in \Documents and Settings\\Local Settings\Application Data\Adobe\Adobe Contribute CS4\\Configuration\Commands and it worked fine.

I found the problem was my clients fonts were all lower case ie "arial" while mine started with upper case ie "Arial" I just mapped to the corresponding fonts on my system.

Contribute CS4 Crashes Using Vimeo Links

We recently started posting videos on Vimeo and tried to add links on our website (using Contribute CS4). We can create a link to any Vimeo page but then Contribute will crash when editing any text or when looking at the properties of the hyperlink. If I remove the Vimeo link the crashing problems immediately go away. This happens even if the link is just to http://vimeo.com.
We will consider upgrading Contribute if this problem goes away in newer version, but we don't want to spend more on Contribute if the problem also exists in newer versions. Anyone else having this experience?

fitpuppy wrote:
questions: where is the InDesign Defaults file? and, most importantly, how can I fix this problem? It's really hard to work w/o a links panel.
If replacing prefs will work (no promises, but sudden flakiness like this is a good candidate), you'll find all you need at Replace Your Preferences
If it doesn't work, post a link to the crash report as John suggests and he can probably give you some insight into what the problem is.

Contribute CS4 Paste/Insert Issues

I hope someone can help with this. We are having an issue
where we can't paste/insert anything having to do with HTML into a
nested template in Contribute CS4. If we select text from notepad
and paste or "Paste Text Only" from Contribute, it works great! We
did not have these issues in CS3.
We would just roll back to CS3, but we upgraded to CS4
because when editing a page in CS3 with a flash script, cs3 would
mess up the script.
Thanks!

Hi,
Can you please let me know the exact scenario to reproduce
issue?
Also please send me the nested template you used and the
parent template of the nested template to [email protected]
You information will be kept confidential.
Thanks.

Contribute CS4 for the PC

Hi there.
We have a client who is using Contribute CS4 on Windows, which they downloaded and installed sometime ago.
They have since lost the original install file and are in need of reloading the software. They have a serial number. Are you able to supply a download link please?
Thanks,
Andy.

Direct Download Links for Adobe Software
Mylenium

Contribute CS4 - Can you schedule Publishing?

Dear Community,
Is it possible to schedule publishing on Contribute CS4? I'd like to apply some changes to my website and have Contribute CS4 publish them automatically at the end of the day, 5pm for example, rather than having to publish manually.
Is this possible?
Kind Regards.

Hi,
I do not think it is possible to schedule publishing of web pages, with Contribute as of now. But, you could send it as a Feature Request using the following link:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=9

Contribute CS4 problem

I have used several versions of Contribute. The most recent install is Contribute CS4. The computer I have been using suffered a hard drive crash and had to be replaced. In trying to reinstall Contribute I am unable to get beyond the 30 day trial because I don't have the serial number of the previous install. Please help me. I use this product to update a website for a non-profit arts group.

You will most definitely need the serial number to go beyond the trial. If it wasn't neccesary, everyone would be doing it.
That being said, if you registered the product with Adobe (you did register, right?), they will have that information available in your Adobe account. Sign in at https://www.adobe.com/account/sign-in.adobedotcom.html?returnURL=http://www.adobe.com/.
If you did not register, a call to customer support (be ready to prove that you own the software) may be in order.
Good luck.

Contribute CS4 Disc/ Download Link?

Greetings Contribute Forum Users!
I have managed to lose my disc for Contribute CS4 and Tech Support suggested I post here to see if anyone happens to have a disc or the download link ferreted away? I have my own serial number, so no worries about using one of your licenses. Any help would be much appreciated!
Best,
Kristen

Hi Kirsten!
Please let me know the platform (Windows or Mac) for which you need the installer for Contribute CS4.
Also, if you could provide me your contact details on a private message, we would revert back to you with the details from where you would be able to download the setup for Contribute CS4.
Regards,
Sharad

Contribute cs4 upgrade/update

Is there an upgrade/update to contribute cs4 or do we have to purchase cs5? Our web site server was updated & it will not run on cs4.

You would need to upgrade to the newest version (6.5).

Contribute CS4 hides repeat question buttons

Hi all,
when upgrading to Contribute CS4, our internal client cannot see the buttons ,it is there on screen, but somehow hidden underneath the another div, the above image was taken using CS3, in CS4 its completely hidden behind the div.
does anyone else experience the same problem ? if so, please direct me to a solution.
cheers,
Tan

Hi all,
when upgrading to Contribute CS4, our internal client cannot see the buttons ,it is there on screen, but somehow hidden underneath the another div, the above image was taken using CS3, in CS4 its completely hidden behind the div.
does anyone else experience the same problem ? if so, please direct me to a solution.
cheers,
Tan

Contribute CS4

Similar Messages

Maybe you are looking for