Contribute Publishing Server and Contribute CS3?
Is Contribute CS3 compatible with Contribute Publishing
Server? If not, does anyone know if an update to CPS is coming
soon? It's still at version 1.11. Yikes!
I guess I didn't see anything from Macromedia that tells me
that CPS works with the new version. I'm not looking for new
features. I just want to make sure there aren't any
incompatibilities, outstanding bugs.
Similar Messages
-
Contribute Publishing Server and SSO
Hello,
Does anyone know how to integrate Single Sign on (SSO) for
contribute publishing server? Basically instead of contribute
asking for authentication it sends out a request. In my
circumstance I need it to authenticate via Smart card instaed of
username /password
Thanks!I guess I didn't see anything from Macromedia that tells me
that CPS works with the new version. I'm not looking for new
features. I just want to make sure there aren't any
incompatibilities, outstanding bugs. -
Streaming Webcam with media server and cs3
Can someone explain how to stream a webcam with media server?
Ive got media server and flash cs3 (actionscript 2.0 in this
case) installed, and I want to create a live webcam stream, but Im
not really sure how to do it. I know it involves NetStream, and
camera somewhere along the line but thats about it. If someone coul
give me an iea of how to o it that owul be much appreciated.
ThanksClockwork_Killa,
I don't use it with webcams, but there are some nice examples
in William Sanders book, Actionscript 3.0 Design Patterns. It's the
only book I've found that has any real world examples of working
with media in Flash with fms2.
Hope it helps. Good luck. You're going to need it ;) -
Error when enabling publishing server
The Contribute Publishing Server console on my web server
provides the following URL for enabling publishing services:
Click Enable Publishing Server, and enter:
https://svr-ehrenwerks:8900/contribute/
In Contribute, when I adminster the website and attempt to
"enable publishing server" using the provided URL, an error message
shows up telling me the publishing server at
https://svr-ehrenwerks:8900/contribute/ does not respond.
This URL does not exist on my win2003 server. My guess is I
need to set up an actual domain to replace the svr-ehrenwerks part
of the url and include a virtual directory called "contribute"
under this domain in order to make all this happen. Please help me
"enable my publishing server." Thanks!kurtanp wrote:
> The Contribute Publishing Server console on my web
server provides the
> following URL for enabling publishing services:
> Click Enable Publishing Server, and enter:
> https://svr-ehrenwerks:8900/contribute/
> In Contribute, when I adminster the website and attempt
to "enable publishing
> server" using the provided URL, an error message shows
up telling me the
> publishing server at
https://svr-ehrenwerks:8900/contribute/ does not respond.
> This URL does not exist on my win2003 server. My guess
is I need to set up an
> actual domain to replace the svr-ehrenwerks part of the
url and include a
> virtual directory called "contribute" under this domain
in order to make all
> this happen. Please help me "enable my publishing
server." Thanks!
>
How did you install CPS? Which OS are you running?
1. Simple Installation
2. War Based installation (deploying war file on your app
server)
Nope you dont need to create virtual directory---
Once you install CPS 1.x? (Simple installation), at the end
of
successful installation, go to your browser and type
https://localhost:8900/contribute/ and see that you are
viewing the
certificate and it allows you to login.
you dont need to create any virtual directory.. -
Cannot save changes when enabling Publishing Server
I have Contribute 4 with Contribute Publishing Server 1.11.
I'm able to setup normal Contribute sites fine and was able to
setup one Publishing Server site. Now though, whenever I try to
enable Publishing Server on a site, it enables alright but when I
close the Site Administration window I get an error that says
"Contribute cannot save your changes to the website's shared
settings on the server".
I've tried checking permissions; everything seems 'liberal'
enough like Contribute likes it. I've reinstalled Publishing Server
(including deleting any _mm folders). I've attempted deleting and
re-adding sites more times than I can count. Nothing has seemed to
make a difference. Has anyone experienced this problem or have any
ideas what might be going on? Thanks very much!
Nathan WilliamsHello Nathan, I'm using Contribute 3.11 (without Publishing
Server) and I'm experiencing the same issue: "while trying to setup
the admin password".
It seems to me that this is a bug from Macromedia... and
hopefully they will respond to us.
Alan Q. -
Transfering reports to other publisher server
Hi all,
First of all, all the best wishes.
Is it possible to copy the reports that you made on a 'devolop' publisher server to a 'test'publisher server, and so on?
Or what are the best pracitices to work with this problem?
I can't find anything about this in the manual or in blogs.
We are working with an OTAP street (this must be DTAP street in english or something)
(Develop, Test, Acceptation, Production) so we want to copy reports from one server to another.Hi,
you can copy and paste the folders of one repository to the other and synchronize via the UI as Administrator. A pitfall could be the datasource names in the xdo-file. If you only have changed the templates (rtf) you don't need to synchronize, they are used automatically with the next call ... that's the way I use, but perhaps there's something more sophisticated.
Regards
Rainer -
BARS data (when replacing publisher server)
Hi there,
I gonna replace the publisher server and then connect the new publisher with the existing subscriber.
My question is:
When I run BARS and choose the data source server, should I choos both publisher and subscriber server?
Or just publisher server?
I read the BARS document as follows,
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00807a78ce.html
And "Replacing Servers During the Upgrade" as follows, http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/install/upgrade/upg413/replace.htm
Those documents don't include the detailed information.
Thanks.Hi Qinghao, Thanks man!
Good stuff, you are halfway there! The db replication problem and DC directory health problem are most likely related;
Interpreting the Results
The validation results display in the Upgrade Assistant Summary window. At the top of the window, a report summarizes the results for all modules and displays which modules failed, which modules produced warnings, and which modules passed. A link to the folder that contains all log files, including the Upgrade Assistant Summary report, displays also.
To identify a problem with the failed validation module, review the following information that displays in the Summary window:
The first link points to the log file that specifies the error or warning.
Click the first link and search for the error or warning; for example, ERR: or WARN: .
The second link points to the corrective action file that describes the log file error message and recommends the corrective action.
Click the second link to open the corrective action file. Search the corrective action file for the error message that is noted in the log file. Review the description and corrective action.
Caution After you correct all problems that the utility identifies, Cisco strongly recommends that you run the utility again on every server in the cluster before you begin the upgrade.
Obtaining the Log File
You can obtain the results from the utility in the following directory:
C:\Program Files\Common Files\Cisco\Logs\UPGRADEASST (for example, UPGRADEASST-05-15-2003_13.47.58)
To access the log file, click the Summary file.
Tip A link to the log file displays in the Summary window for every failed validation module. To access the log file, click the link in the Summary window.
The Summary.html file, which is the Upgrade Assistant Summary report, provides the exact same information that displays in the Upgrade Assistant Summary window.
Each time that you run the utility, the utility creates a new log folder and new set of log files. The utility does not remove the log files, even if you uninstall the utility. You erase the log files when you reimage the server or manually delete the files.
From this good doc;
Using Cisco CallManager Upgrade Assistant Utility 4.1(3) for Cisco CallManager Release 3.3(5) and Later Releases
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guide09186a00803f5c59.html#wp262763
**This db replication between Pub and Sub(s) is broken**
The publisher database server upgrade requires that all call-processing processes that the server handles fail over to the configured subscriber servers. Database replication must exist prior to the upgrade, so failover occurs.
This utility verifies the database replication status for all subscriber servers in the cluster. This utility validates that the database contains the latest information about the system. Validation results include Running, Idle, Failed, or Succeeded.
Have a look at this doc for the method to fix the db replication issue;
Using DBLHelper to Reestablish a Broken Cisco CallManager Cluster SQL Subscription
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801e7ddf.shtml
Hope this helps!
Rob -
Do I need Contribute AND Contribute Publishing Server?
Do I need to have Contribute Publishing Server installed on
the web server on order to update web pages with Contribute?
- AndreaHi,
I downloaded the trial of contribute cs3 and was able to
update web pages without cps. I'm still trying to figure out
exactly what cps does though?
Mark -
Contribute CS3 embeds the contents of SSI Includes into page after Edit and Publish
I have tried every possible way to figure this out but it
seems as though no one has this problem or a solution...
My Dreamweaver CS3 Template based files that have SSI
Includes placed in a "non-editable region" of a template and/or
nested templates are continually embedded, merged, or hard-coded (I
used those keywords for anyone else who might be searching for help
on this frustrating issue) into the page after it has been edited
and published with Contribute CS3 for Windows.
After many, many, hours and days rebuilding templates
(thinking that it was my code), experimenting with .htaccess
include_path variables, and cursing this application, I have come
to one conclusion - if I put my includes within "editable regions"
in the templates or the template based pages, edit and publish the
page with Contribute - then the page is saved normally, with the
includes intact and not embedded within the page. This is of course
not necessarily desirable!
I have tried using various types of include directives like:
<?php include('footer.inc'); ?>
<?php require('footer.inc'); ?>
<?php virtual(footer.php'); ?>
<!--#include file="footer.inc"-->
<!--#include virtual="footer.inc"-->
All Includes are merged into the template-based page after
the page has been edited and published with Contribute - if they
are in "non-editable regions"!
Please, someone point me in the right direction - if it's
calling Adobe's Help line, or posting the files or whatever. I
can't finish this project and hand off to the client until this is
resolved.
AndrewHi,
I'd be reall interested to know if you got anywhere with this as I'm having the same problem.
The article referenced further down this thread is no longer available either.
Any suggestions or advice on this issue would be much appreciated.
Cheers,
Bill -
Javascript errors when formating text and images in Contribute CS3
I'm using Contribute CS3 on Vista, I insert an image inside a
paragraph tag with text then align the image
ie the source code looks like this:
<p><img src="..." alt="" align="left"/>some
text</p>
I change the text in the paragraph to bold
Source code example: <p><img src="..." alt=""
align="left"/><strong>some text</strong></p>
I will get the following error messages:
1 This error appears 2 times:
"While executing DW_Text_CSS_Style canAcceptCommand in
ccText_Styles.htm, a JavaScript error occurred."
2 This error appears 2 times:
"While executing DW_Text_Bold canAcceptCommand in
Text_Style.htm, a JavaScript error occurred."
3 This error appears 3 times:
"While executing DW_Text_Italic canAcceptCommand in
Text_Style.htm, a JavaScript error occurred."
4 Next all the styles and formatting options are greyed out
but I can still publish or discard.
To be able to apply the styles and formatting in Contribute
CS3 I now need to close the application and reopen it again and be
careful not to reproduce the error.
I've also tried renaming the Configuration folder under
c:\Users\myusername\appData\Local\Adobe\Contribute CS3\ but it
hasn't worked.
We've reproduced this error on 3 similar machines in our
office all running cs3 but the bug doesn't occur when performing
the same steps in Contribute 3 or dreamweaver CS3 which is running
side by side on these machines.It might be trying to pull the image from a different
location than the image is currently stored in. Try to move the
image file to a different folder and then load. -
Contribute CS3 will not publish Flash Player
A few months ago the company I work for bought Contribute CS3
to edit our website. The homepage of our website contains a Flash
Player file. When I edit and publish this homepage Contribute will
not publish the Flash Player file this section just shows up blank
stating movie not loaded when I bring up our website. The same
thing happens even when I do a 'send for review' before I actually
publish the page. I have administrator rights through Contribute to
edit this website therefore I am confused as to why Contribute will
not publish this Flash Player file. I have also tired to reinsert
the Flash file while editing in Contribute and still the file will
not publish. Would anyone know why this would happen?
Thanks!Is this occurring with other Web CS applications or only with
Contribute CS3? For general troubleshooting of Web CS products
please go here
http://www.adobe.com/go/kb401401
If this does not address your issue, submit an incident
request via the product support page
http://www.adobe.com/support/contact/ -
We have just upgraded to Windows Server 2008 64 bit. I can
not find any documentation if Contribute Publishing Server will
install and work in that environment. Does anyone know?????
Thanks,
AndyI got it to work by copying a previous installation from Windows Server 2003 to Windows Server 2008
http://onceuponans.blogspot.com/2009/04/installing-contribute-publishing.html
-Andy -
Contribute Publishing Server - forgot password!
We have Contribute Publishing Server running and have forgotten the admin password. How do we reset this?
thanks.I guess I didn't see anything from Macromedia that tells me
that CPS works with the new version. I'm not looking for new
features. I just want to make sure there aren't any
incompatibilities, outstanding bugs. -
Can not install contribute publishing server on linux
Hi, All:
I try to install the contribute publishing server on Red Hat
Linux and Sun Solaris.
It works very well on Sun Solaris.
But I have problem in installing on Red Hat 64 bit Fedora
core 6 machine, and got the error message:
"gzip: /tmp/install.dir.20676/Linux/resource/vm.tar.Z: not in
gzip format"
I even manually try to use "uncompress", "zcat" to uncompress
/tmp/install.dir.20676/Linux/resource/vm.tar.Z
but it did not work.
Any idea or suggestion will be appreciated.
Thanks.it requires a minimum of Windows 7 SP 1 before installing SQL server 2008.
It can be downloaded from below:
http://support.microsoft.com/kb/976932/en-us
For more details check below:
http://msdn.microsoft.com/en-us/library/ms143506.aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
Dreamweaver CS4 and Contribute CS3
Hi,
I want to upgrade do Dreamweaver CS4 and some of my authors
use Contribute CS3. Will both be compatible or will they have to
upgrade do Contribute CS4?
Thanks
robert1. start Contribute
2. main menu >Edit>Administer Websites>Choose
website
3. choose Administration from the list on the left
4. click the button 'Remove Administration'
Maybe you are looking for
-
Need help with completion and debugging...please
import java.io.*; public class DeleteSpaces3 public static void main (String[] args) FileReader inputFile = new File("Omerta.txt"); FileReader outputFile = new File("omertaEdited.txt"); FileReader in = new FileReade
-
Movie Virgin - download problems
Shot a short movie on a Fuji f50 p&s. Able to download to the Fuji Finepix program. I can play it fine in the Fuji program. Cannot open in iMovie, cannot attach to E mail or burn. What I get is the 1st frame - period. The Fuji download has an AVI suf
-
CP website and IE version 11 - go or no-go
I've been using the CP website for a few weeks and discovered, that the menus are not working properly in IE 11. The dropdown menus are not being shown using IE 11. If I use Firefox, the menus are shown, but the text within the menus are only partly
-
Is there a way for Flex to detect whether the Java Plug-In is installed?
Hi All, Need your help. Is there a way for Flex to detect whether the Java Plug-In is installed? This may be require a JavaScript External-Interface. Can we get if the Java Plug-In is installed and if so, whether it is JRE 1.6.X ? Regards, Amit
-
Hi all, Please let me know the configuration to eatablish Internet connectivity over IPv6 as static routing between PE-CE . As of now neither i have Public AS number nor i have APNIC IP and wanted to run Dual stack so as to avoid any reachability