Contribute Won't Transfer Data

After working well some weeks ago, Contribute CS3 now says it
is not able to transfer data, so I can't access my site to edit. It
does state that it can connect to the server, but then nothing
happens. I've had to recreate a connection profile with the ftp
info and url, but still nothing. The message suggests my firewall
is to blame but those settings are the same as when the program was
working fine. Needless to say, I'm perplexed.
Any thoughts?
Joe

I've learned that my firewall is evidently the culprit which
is surprising since I've never encountered this before while the
firewall has been on.
Since I'm on a Mac using 10.4, what settings in my
Preferences should I utilized to allow for access while the
firewall is on?

Similar Messages

P2 STORAGE Volumes won't transfer data

Okay. So. I have 5 (8 GB) P2 cards loaded up on my P2 Store. The volumes show up on my desk top and in FCP 6.0.1 they show up in log and capture with their respective thumbnails and "(incomplete)" next to the file. I select a clip to add to que... it moves down tho the cue... begins to start transfer and then sits there "idle" or stops. If you click on the clip in the cue I get an exclamation point????
I can view (kind of) with P2 CMS but there is still a pink exclamation point in the upper right hand corner of the thumbnails. Tried to export via P2 CMS but said XML was locked. Very frustrating. (by the way footage is DVC Pro HD 24fps)
Any "workarounds" that don't involve me having to purchase Raylight? Not even sure that would work.
Thanks.

Wasn't referring to loading the clips into the que per se. Where is all your p2 media being stored? I usually offload all my media to external hd's. Then when I'm ready I load several p2 cards worth of media into the log & transfer window by using the + icon in the top left corner of the screen. This will automotically span clips that run across cards. I select various clips, set in and out points, then add them to the que o be imported. I'm just wondering if you ended up with one very long clip and you need to load all you p2 media into the window at the same time then worry about adding it to the que.
Al

Airport connects but won't transfer data

I've got the latest macbook pro and it's been working flawlessly since release. However just today inexplicably Airport has stopped working. When I go to network diagnostics, under Network Status i get a Failed status for "Internet" and a Failed status for "Server".
I've restarted, disabled/enabled several times. I really have no idea how this could have happened. The problem is definitely not physical-- when I run win7 in boot camp the wireless works just fine. Is it possible for me to reinstall the airport drivers?

no definitely not
as i said, it works fine when running win 7 in boot camp. Also all other computers in household use wireless just fine.
it's just my installation of osx, and it's just wireless. if i connect with an ethernet cable it works fine.

After system restore, half of ipod data won't transfer

I recently had to do a system restore on my computer and now none of my tv shows will transfer to my ipod and most of my music won't. The first time I updated my ipod after the restore a message said something about the device not being authorized for...something. I should note that I did not download anything but podcasts after the system restore, so everything that won't transfer was there before the restore. I'm not a computer genious, so help is really appreciated.

I am having the same issue. The top of the message board states there are 2 "helpful" answers and 1 "solved" answer. Have you been successful in getting everything to transfer and/or how do I access the referenced answers?

In Icloud I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

In Icloud on my imac I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

You have to do it app wise, which means that the icon won't show up in settings, but you will be able to move files from your local drive to iCloud via the Numbers app (move... > choose the iCloud option).
It requires that you set up the same iCloud account on all your devices and that you have the latest version of Numbers on all your devices as well.

How do I transfer data from one username to another?

Hi,
I got a two-button mouse and it started twitching uncontrollably after a few months. Simply Computing advised that I create a new username and transfer data like photos, instant messenger contacts, documents, etc. from my old one to the new one. How do I do that?

Open the Accounts pane of System Preferences and create a new user; next, log in with that user. If your issue persists, it won't be resolved by moving files around, and you should try a different mouse. If the issue doesn't occur in the new user account, log back into the original one and move some of the files from the folder with the house icon to the desktop, noting down what you've moved after each move. If a specific folder contains an item which causes your issue, continue with the items in that folder until you've found the problem file or you've run out of files to move. If you run out of items in the home folder to check, look at the contents of the /Library/Caches/ folder on your hard disk.
(18413)

"Can't Read Or Write to disk" Video Won't Transfer To Ipod

I have transfered videos to my ipod in the past but I have two tv shows from the Itunes story that won't transfer.
They are in the correct mpeg 4 whatever format. My itunes is the most resent version, but for some reason I keep getting the same error.
"Cannot Read Or Write To Disk".
HELP??!!
Windows XP

I've got this problem too. My 5g iPod 30gig syncs after about 3 minutes with iTunes then after loading songs and videos after 10 minutes i get the same message your getting - "Can't Read Or Write to disk". I think theres some kind of USB2 conflict or something. All my other USB devices work fine. All my drivers and software is up-to-date.

I am able to transfer my photos from my iPone 4s to my PC with Windows Vista but it won't transfer my videos? Does anyone know how to do this?

I am able to transfer my photos from my iPone 4s to my PC with Windows Vista but it won't transfer my videos? Does anyone know how to do this?

I have Vista (don't laugh) and my videos are transferred over when I plug in my phone. They don't open up in Winodws Picture Viewer though.
They are under my Photos, under the date created by the sync. Do a search I'm sure you'll find them.

When I sync up my HD videos won't transfer onto my IPOD- Why? How can I fix this?

I have an IPod Classic... I'm trying to sync up my HD videos- tv shows but they won't transfer onto my IPOD. Anyone know why?

Ok so HD video is not supported, which explains the problem so what is the solution? Do I have to put it through a converter to make the data and bit rate smaller? Would that even be possible?

Transfer data rate

OK, so I have resolved an older problem only to have dropped frames all the time during playback. How do I find out the maximum transfer data rate my processor can handle? ANy suggestions on how to get around an issue like that? If I want clean crisp graphics, how can I avoid the DV codec - which I understand is awful for graphics- yet still be able to play my sequence back without dropped frames?

Hi Kristin,
If I read correctly, you moved everything off your internal drive to an external. This external drive - is it a SATA drive, or FireWire? You mentioned SATA before, so I'm inclined to think that's what it is. If it IS an external Serial ATA drive, when you got it, did you zero all data on the drive before using it?
Also, when you started using this new external, did you change your capture/render drive settings in your prefs in FCP? If not, they may still be set to your system drive, the default, instead of your new external hard drive. If this is the case, change it in FCP, save, and quit. TRASH the render files and move all the capture files from the system disk. re-open FCP, reconnect the moved capture files (if any), and of course, you'll have to re-render most of your timeline. when you do this, it'll render everything to the new hard drive (SATA, yes?), and you SHOULD be good to go.
Now, as for interfacing with a monitor or an external device - are you going throgh firewire to a camera or deck and then to your video monitor? If so, no matter what, you won't be able to view anything but a single frame at a time with uncompressed. The only other thing that I can think of is that your camera/deck/external video device is powered on while you're trying to do this. In order to monitor Uncompressed externally, you need a pretty spiffy video capture card like the Kona. But internally, you should have no issues. So, make sure any external device except a hard drive is turned OFF, and disconnected.
If none of this works, what you may want to do is change your sequence settings back to NTSC/DV for compression, and when you're totally done editing your project, you change them BACK to uncompressed, render, and export an uncompressed file to an external hard drive, take that drive to a video production company, have them slap it on a DigitalBeta tape as a master, and you're good to go.
Hope this helps...
-Kris

Some video files won't transfer from old Macbook to Macbook Air

Hi all,
My old Macbook (circa 2008) recently stopped working, so I upgraded to a new Macbook Air. I had the harddrive of my old Macbook extracted and made into an external harddrive, and then used Migration Assistant to transfer my data to the Macbook Air. I then upgraded to OS X 10.9. However, I have found that several video files I had saved on my old Mabook do not appear on my Macbook Air. These are a mix of .mpeg and .avi files. I reconnected the external harddrive and located these files on it, and tried copying them to my Macbook Air one by one, but they won't transfer and I recieve the error message that the operation cannot be completed because the file is in use. I can play them in quicktime or VLC direct from the external harddrive, but can't save them to my Macbook Air. I tried restarting my computer, reconnecting the hard drive and so on, but to no avail. I tried transferring other videos that had come accross with Migration Assistant, and these copy to my Macbook Air without any trouble. But the files that didn't get transferred just won't. Is there anything I can do to get these files onto my new computer?
Any help is appreciated!

Open the library on the EHD with the Finder as shown in this screenshot
and look in the Masters folder to see if any of the original files have zero bytes? Do not make any other changes/alterations, i.e. look but don't touch. If you do find zero byte image files then it's not the copy process that is the culprit but the files are bad to start with.
OT

My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
In terms of the wall charger, have you tried a different charger and/or cable, or do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

N96 Won't transfer music files

My N96 Won't transfer music files even though it's a brand new phone with plenty free memory. 'Nokia Music Manager' just says 'There is not enough free memory in the device'. I've checked that it's the phone memory in use (E:\) but it still won't transfer.

This is usually a problem with the default target directory in Music Manager, however you seem to say you've already checked this.
Rather than waste a lot of time trying to fix this, I'd just copy the files either by connecting the phone via USB cable in Data Transfer Mode or by using a card reader if you're transferring to the card and drag and drop the files to the Sounds\Digital directory.
I actually do all my transfers (usually well over 0.5GB a week in podcasts) like this: music manager's too much of a pain to use.
Just remember to refresh/update your library once you've transferred the files.

How can I transfer data from one iPhone to another iPhone which is already set up?

I have an old phone that I want to transfer data to. The phone is set up with previous data. How do I transfer current data to it?

if the iphone have not been synced with another computer then just sync it with yours
if it have then you cant syncing it with your computer would then clear the iphone and adding the info from your itunes to it

How can I transfer data from one phone to another

I have a damaged iPhone 3 and am trying to transfer data to another iPhone 3. How can I do that?

take a look at the link http:///support.apple.com/kb/HT2109

Contribute Won't Transfer Data

Similar Messages

Maybe you are looking for