Control attributes of each individual point in one plot
Can I do it? I create a spiral plot of about 490 points. At each data point I check something, if good I want a green point along the spiral. If bad I'd like a red point. So far, changing any attribute at any point in a plot changes them all, not just the one. I've tried having 2 different plots, one for the good condition and the other the bad. When overlapped their all the same.
anyone got an idea?
Don
lockingnut wrote:
When overlapped their all the same.
Having two plots, one for good, one for bad, is the easiest way to go. If good and bad overlap, you need to make a decision what to show in the foreground. This is independent on how you generate the graph. Maybe you can use different point style for the two plots , e.g. empty circles and X-es.
Of course for full flexibility, you could built it all with a picture indicator, but that would require a bit more work.
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
Is ther a way to Combine two Smart Playlists without dragging and dropping each song into the other Smart Playlist?
Any help is greatly appreciated.
DebraWith the timeline selected, go to File/Export/Movie and export each as a DV-AVI video.
You can then combine those AVIs into a new project with virtually no loss of quality. -
How can I select all stamps in a PDF file without having to click on each individual one?
I use the stamps and text box feature to mark up engineering drawings in abobe acrobat 10. Sometimes revisions come for already worked on drawings so I need to transfer my work over. Usually I just hold control and click each stamp and text box then hit CTRL+C to copy all of them. However, sometimes there are 200+ stamps on a single PDF and clicking each and every one without letting go of CTRL is a lot harder than it sounds.
Any ideas on how to do a "select all" function? (the actual select all doesn't work in this case, it looks for words.)
ThanksStamps are basically comments. As such, they appear in the Comments List,
where you can easily select them by clicking inside the list and then
pressing Ctrl+A. -
How can I select multiple photos of files without selecting each individual one
How can I select multiple files or photos without having to select each individual one? Like you can do on Windows
Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking. -
What happened to the thumbnail photos for an event? Previously when I wanted to transfer an event to a specific folder all I needed to do was drag the thumbnail. If there were multiple events, I only needed to pick the one I wanted and drag it. Simple and it worked very well. If there was an event with several, I only neede to drag the one thumbnail and it was done. Now I need to drag each individual photo to the new folder. Sometimes that could mean 10, 20 or more. Doing one at a time is can be a very slow process. If there are events that need to be split, it can be even slower. Any positive ideas will be greatly appreciated.
You need to follow iPhoto terms since we only know what you tell us
what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
The basic default view of photo is by event (iPhoto '08 and later)
Exactly what you you trying to do?
LN -
Is there a way to order several different iPhoto projects at one time, on the same order? (to avoid paying shipping on each individual project?)
No, unless they're all prints.
(117535) -
I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter -
I am wanting to order about 100 individual iphoto cards, is there anyway of placing one order for all these so i dont get charged £1.99 delivery for each individual card?
Afraid not.
Regards
TD -
Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
Hi,
Further to my previous posting yesterday I have somehow miraculously managed to find and restore my playlist folders (although some of my playlists that I created are missing tracks for some reason - any suggestions???).
However, as happy as I am, when I click on the folder heading for each playlist eg. ADELE it drops down the playlist I have for each albumie. 19, 21 but the folder itself shows my entire iTunes library. Bizarre! Any suggestion as to how I remove the library from each individual folder?
I have added a new folder and re-named > dragged playlists into it and then deleted the old one with the entire library in, but taking into account I have a huge iTunes library it will take me hours to do this for all of my folders.
Help much appreciated! ;-))And do I take it that the actually playlist, e.g. THE E.N.D. only shows the tracks of that album? Anyway, something has gone horribly wrong.
The easiest way to resolve this might be to go back to an earlier build of your iTunes library and then bring it up to date with any recently added content, like this:
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
I would add that you probably have too many playlists. The column browser provides a way to quickly locate, for example, all tracks by an artist, in a certain genre, or specific albums. Creating multiple playlist folders for artists, with playlists for their albums, is overkill. Playlists are best used to create lists or selections that can't be pulled out easily from the Column Browser.
tt2 -
In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!
You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards. -
I want to set up my spreadsheet to display two digits to the right of the decimal point, even if zeros, and not have to do it for each individual cell.
Select all the cells you want formatted that way (or the entire table if that's what you want)
Open the cell inspector
Set the format to "number" with 2 decimal places -
How do I receive multiple texts from the same sender, each individually?
How do I receive multiple texts from the same sender, each individually?
So I receive automated reminders from my job & I want them to come individually. For example, one text -- time stamped 10:14 pm, then another 11:12 am, coming as separate msgs.
-
Can I send a text to a "group" contact without selecting each individual member?
Can I send a text to a "group" contact without selecting each individual member? I have a group formed in my contacts, but I still have to select each member in that group to send a text or email from my phone.
There are apps that allow you to address sms messages to groups (such as Speed Names: https://itunes.apple.com/us/app/speed-names-contacts-groups/id285124918?mt=8), but not iMessages. Perhaps this will change with a future iOS update.
The only point of having them at the moment is to allow you to limit the view to only contacts belonging to a group, so that you can more easily add the individual members of the group. But at the present time, you still have to add them individually. -
Is there any way to delete multiple spam messages at once. Right now I go through each individual spam and delete one at a time. This is very time consuming. Any tricks out there.
Thank youHi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara
Maybe you are looking for
-
Why does my cursor freeze in OX 10.6.8 until i relaunch my finder?
While online in either Safari or Firefox my cursor as I am navigating a page will suddendly freeze on screen. I them am forced to relaunch finder, then unplug my mouse from the keyboard and once again, relaunch the finder. Then the cursor will move a
-
Oracle 10g on Windows - How to connect?
May be this is a small one, I dont know how to connect to sql in windows. I installed oracle 10g on Windows XP SP3, choosing basic Installation. Successfully Installed. In Linux we use sqlplus '/as sysdba' to connect and we get sql> prompt. In window
-
I REALLY need to use MB with lid closed...
Sleepless doesn't work after the upgrade, does anyone know of ANYTHING that will work right with this new update? I'm not using external keyboard/mouse btw.. thanks!!
-
I want to update my Lightroom but it doesn't seem to be the way I am used to updating... What is CC and is that what I need to be doing? It only gives me the option to "Install" Lightroom CC. I am working on a macbook pro.
-
Which plug-ins are not necessary?
I don't know which plug-ins are necessary and which should be deleted. Thank you.