Control break query

TYPES : BEGIN OF T_TAB,
            VBELN TYPE VBEP-VBELN,
            BMENG TYPE VBEP-BMENG,
          END OF T_TAB.
DATA : SUM_TAB TYPE STANDARD TABLE OF T_TAB WITH HEADER LINE,
         WA_SUM LIKE SUM_TAB.
DATA : TOTALCRD(8) TYPE N VALUE 0.
CLEAR : SUM, TOTALCRD.
SELECT VBELN BMENG INTO TABLE SUM_TAB FROM VBEP FOR ALL ENTRIES IN IT_DATA WHERE VBELN = IT_DATA-VBELN
                                                                              AND POSNR = IT_DATA-POSNR.
internal table it getting
vbeln        bmeng
00001      12
00002      13
00002      14
00002      11
00003       01
i need to sum 131411 for unique and to store internal table like this
00001    12
00002    38
00003    01
regarding anil

Hi,
Follow the Code ,
data : TOT_TAB like SUM_TAB OCCURS 0 WITH HEADER LINE.
LOOP AT SUM_TAB.
MOVE-CORRESPONDING SUM_TAB TO TOT_TAB.
COLLECT TOT_TAB.CLEAR TOT_TAB.
ENDLOOP.
Now ur Final Internal Table will contain the Values as u asked.
Regards,
Morris Bond.
Reward Points if Helpful.

Similar Messages

Is there any way to use Control Break in a SQL Query

Hi,
Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
Is there any way to modify the SQL query.
SQL
select dept, loc, count(*)
from dept
group by dept, locOutput-1
Dept Loc Count(*)
10 AA 1
10 BB 2
10 CC 2
20 AA 2
20 BB 2Output-2
Dept Loc Count(*)
10 AA 1
 BB 2
 CC 2
20 AA 2
 BB 2Thanks,
Deepak

DeepakJ wrote:
Hi,
Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
Is there any way to modify the SQL query.
SQL
select dept, loc, count(*)
from dept
group by dept, locOutput-1
Dept Loc Count(*)
10 AA 1
10 BB 2
10 CC 2
20 AA 2
20 BB 2Output-2
Dept Loc Count(*)
10 AA 1
BB 2
CC 2
20 AA 2
BB 2
Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
select
 nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
, nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
, e.mgr
, count(*) n
from
 dept d
 join emp e
 on d.deptno = e.deptno
group by
 d.deptno
, d.loc
, e.mgr
order by
 d.deptno
, d.loc
, e.mgr nulls first;
DEPTNO LOC MGR N
 10 NEW YORK 1
 7782 1
 7839 1
 20 DALLAS 7566 2
 7788 1
 7839 1
 30 CHICAGO 7698 4
 7839 1
 40 BOSTON 7698 2
 7902 1

Sum of the sql query after a control break

Hi all,
I need some help about getting the final sum of the sql query after doing a control break in a dynamic report, ( the control break make me the sum of each report but didn't leave me the sum of all the query)
Thanks in andvance for your help !!
Eric

Have a look at the text_io package:
http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=3&vtTopicFile=f1_help/oraini/c_text_io.html&vtTopicId=
cheers

Control Break problem (using format option in the report)

I am trying to create control break on one of my reports. I am grouping query by 3 columns and I am trying to create control break but one of the column is not available for the control break (is not listed there).
Any Idea why this my happen?
Edited by: robik on Jun 23, 2012 9:08 AM

robik,
Try adding an Order By clause to your SQL.
Jeff

Control Breaks in Interactive Report Throw off HTML Header Style

I created an APEX 4.0.0.11.23 page with an interactive report. Several columns are character strings with embedded spaces. At first, when the columns displayed they were wrapped around to as many lines as there were spaces. so I formatted it with this HTML header style:
$('td[headers="ADDRESS"]').attr("style","white-space:nowrap");
This corrected the problem but then the user requested two breaks on Column_A and Column_B. This threw the formatting off so I corrected it with this HTML header style:
$('td[headers="ADDRESS BREAK_COLUMN_A_COLUMN_B_2"]').attr("style","white-space:nowrap");
Now the lines wrap for some but not for all rows and there does not seem to be any pattern. So for instance the address for one particular row will look display in the desired format as:
530 EAST 144TH STREET
And another almost identical row will display as:
525 EAST 143RD
STREET
I thought there may be binary data in the column so I embedded the following code in the main SELECT query that drives the page”
Regexp_Replace(ADDRESS, '[^[:print:]]')
This did not help. How do I implement HTML header styles for interactive reports with multiple control breaks so that the address is formatted properly for every line? Is there a related report or page attribute that needs to be set?
BTW, the way I discovered the HTML header style for interactive reports with multiple control breaks by following this link which was provided in a related thread:
Re: Interactive Report Control Break disregards HTML Header style.
Edited by: Comet on Sep 27, 2012 11:00 AM
Edited by: Comet on Sep 27, 2012 2:32 PM
Edited by: Comet on Sep 27, 2012 2:33 PM
Edited by: Comet on Sep 27, 2012 2:34 PM
Edited by: Comet on Sep 27, 2012 2:35 PM
Edited by: Comet on Sep 27, 2012 2:36 PM

Suggest you reproduce this on apex.oracle.com using the same theme, IR configuration and equivalent data.
What browser/version are you using?

Need a multi-level control break report displaying a cross-tab for each ...

I need a multi-level control break report that displays a cross-tab report for each
detail and subtotal. The individual cross-tabs are no problem. There are two issues:
1) How to get many cross-tabs (thousands) to appear in one report.
2) How to provide cross-tabs in-line on the multi-level subtotal lines.
Here is a concrete example.
Suppose the data base contains this table:
road (
id_number number, -- this is an artificial PK
city varchar2,
county varchar2,
state varchar2,
length number,
owner varchar2, -- roads may be owned by cities, counties, states, and others
surface_type varchar2 -- the surface type may be gravel, asphalt, concrete, and others
The table is populated with several million records that include every
length of road in a US city.
It is OK to suppose that all the attributes in all the records are not null.
Without the PK, there would be millions of duplicates,
which should all contribute to the summed lengths.
The report I need is like a control break report with a detail line for each
city together with subtotals for each county and state and
a grand total for the US at the end.
However, each detail and total line needs to be a cross-tab report
summing the length over the city, county, state or US
(whichever is called for at that location)
for each combination of owner and surface_type.
so the report would have the following structure:
a city cross-tab for the first city in county 1/state 1
a city cross tab for the last city in county 1/state 1
a cross-tab for count 1
a city cross tab for the first city in county 2/state 1
a city cross tab for the last city in county 2/state 1
a cross tab for state 1
a cross-tab for the US
Any suggestions will be appreciated.
This problem comes up because my client's legacy system,
which is being replaced,
already has such a report (in COBOL).
Thanks!!!
Steve
PS, I know one ugly way to do it. Namely, make a variable for each
possible combination of owner and surface. Then code an ordinary control
break report. However, I am looking for something better.

Hi Jenna_Fire,
According to your description, you have a matrix contains total for each group on each level. Now your requirement is, when you click on any number (data field or total), it will go to the detail report which returns all the detail information of the people
within the group scope. For example, if you click on the total of Active users in United States, it will return the detail information of Active users in New York and Texas. Right?
In this scenario, we should set the parameter (@Country, @State, @City) allow multiple values in both main and detail report. And in Default Value (@Country, @State, @City), query out all distinct values. In the textbox which contains
those total values, when set use these parameters to run the report, we only need to pass the parameters of parent groups. For example, if we click on the total of Active users in New York, we only need to pass Country, State, Status to detail report, and
in the detail report, the City parameter will use all distinct values (Default Values) because we don't pass the City parameter. We have tested this case with sample data in our local environment. Here are steps and screenshots for your reference:
1. Create parameter Country, State, City and Status in both main report and detail report. Set both Available Value and Default Value get values from query (Create a dataset for each parameter, use "select distinct [column] from [table]" as query). Set allow
multiple values for parameter Country, State and City in both reports.
2. In corresponding textbox, pass appropriate parameters in go to report Action.
4. Filter data in detail report (in where clause or using filters).
5. Save and preview. It looks like below:
Reference:
Using Parameters to Connect to Other Reports
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

ANY SY-INDEX REFLECT CHANGES WHEN CONTROL BREAK STATEMENT PROCESS

Dear Guru's,
                 I have a requirement where i have to move the values to variable when control break (AT END OF) process. So i want to move the values according to the end of Vendor so for that i want to know is there any sy-index available which reflects changes when Control break (AT end of) process.
LIKE Sy-subrc = 0 when select statement fetches record or sy-tabix is like counter for loop.
Hope to get reply soon.
Regards,
Himanshu Rangappa

Hi,
There is no system Fields for it.
But your requirement can be done with 'AT NEW' and 'AT END' statement.
Refer this sample example,
loop at otab.
    at new module.
      move otab-module to otab2-module.
    ENDAT.
      at END OF effort.
      sum.               "Do your calculations here
      move otab-count to otab2-count.
      append otab2.
    endat.
endloop.

In alv report can i use control break events? if no .whay?

Hi all,
in alv report can i use control break events? if no .whay?

hi,
you can use control break statements in ALV report.
for example: if one PO is having more than one line item, that time you need to display PO only once.

Doubts with control break statements on internal table loops (AT/ENDAT)

Hi, i've had a couple of doubts for a long while which I hope someone can clarify today:
1) I know how to use the AT statements, however, i'm not sure I get correctly what this part of help regarding this commands means:
"The control level structure with internal tables is static. It corresponds exactly to the sequence of columns in the internal table (from left to right). In this context, the criteria according to which you sort the internal table are unimportant."
I've always sorted the internal table before the control break and it works that way. For example:
SORT ITAB BY EBELN EBELP.
LOOP AT ITAB.
AT NEW EBELN.
* Code for the order header
ENDAT.
ENDLOOP.
If I don't sort the internal table, it doesn't work! (i get dupplicated processing). In the example, if i have more than one register with the same EBELN and they're not consecutive, the header gets processed twice. I really don't get that part of the help text.
2) I know this: "At the start of a new control level (i.e. immediately after AT), the following occurs in the output area of the current LOOP statement:
All character type fields (on the right) are filled with "*" after the current control level key.
All other fields (on the right) are set to their initial values after the current control level key."
My doubt is: WHY is that this way? Because sometimes (most times) I need those fields INSIDE the statement! So when that happened i've solved it in one of three ways:
LOOP AT ITAB INTO WA_ITAB.
WA_ITAB_AUX = WA_ITAB.
AT NEW FIELD.
 WA_ITAB = WA_ITAB_AUX.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
LOOP AT ITAB INTO WA_ITAB.
AT NEW FIELD.
 READ TABLE ITAB INDEX SY-TABIX INTO WA_ITAB.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
* (Without AT)
LOOP AT ITAB INTO WA_ITAB.
IF WA_ITAB-FIELD <> FIELD_AUX.
 FIELD_AUX = WA_ITAB_FIELD.
* ...Rest of the code for the first register
ENDIF.
ENDLOOP.
Is there any problem with this way of coding? Can be done better?
Thank you very much in advance.

Hi..,
1)
See if u sort the table on a field on which u r using AT ENDAT .. then all the records which are having the same value for that field will form a group or those reocrds will be at one place.. so when u sort the table for all the records AT ENDAT will get executed onli once..
If u dont sort this table on this field then all these records will be at different places and in between there may be records with different value for this field.. so this AT ENDAT will get executed for each record !!
2)
No u cannot use the Right hand fields of the field in the table .. Because these AT events work as Group based operations... So till that field on which AT ENDAT is working it breaks that record into two groups.. One is the left hand fields including that field.. and right hand fields as another group.. and makes the right hand group as stars ****. Thats y u can observe that even any one field in the left hand group changes the AT ENDAT will get executed !!!!
Hope u understood !!!
regards,
sai ramesh

Problem with the control break statement - AT END OF

data : IT_DATA TYPE STANDARD TABLE OF /BIC/OH0SPA_OHD WITH KEY /B28/S_D1DVOX5 ,
FIELD-SYMBOLS : <ls_data> TYPE any,
SELECT * FROM (c_open_hub) INTO TABLE IT_DATA .
*IF sy-subrc = 0.
*ENDIF.
Create the GUID for header
CALL FUNCTION 'GUID_CREATE'
IMPORTING
 EV_GUID_32 = LV_GUID.
TRY.
 CALL METHOD CL_GDT_CONVERSION=>GUID_OUTBOUND
 EXPORTING
 IM_GUID_C = LV_GUID
 IMPORTING
 EX_VALUE = LV_UUID.
CATCH CX_GDT_CONVERSION INTO go_exc .
 gv_text = go_exc->get_text( ).
Application log for errors
 IF gv_text IS NOT INITIAL.
 PERFORM add_msg_to_log CHANGING lt_return.
 CALL FUNCTION '/SPA/APPL_LOG'
 EXPORTING
 LV_OBJECT = '/SPA/APPL'
 LV_SUBOBJECT = '/SPA/ESOA'
 IT_RETURN = lt_return.
 ENDIF.
ENDTRY.
OUTPUT-TRADE_PROMOTION_CRMBULK_CREATE-MESSAGE_HEADER-ID-CONTENT = LV_GUID.
OUTPUT-TRADE_PROMOTION_CRMBULK_CREATE-MESSAGE_HEADER-UUID-CONTENT = LV_UUID.
SELECT * FROM DD03T INTO TABLE lt_dd03t WHERE TABNAME = c_open_hub AND DDLANGUAGE = 'E' AND AS4LOCAL = 'A'.
*IF sy-subrc = 0.
*ENDIF.
Sort the delta table
SORT it_data.
populate the output structure
LOOP AT IT_DATA ASSIGNING <ls_data>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_keyfigures.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_keyfigures>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_signdata.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_signdata>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_bbtype.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_bbtype>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_customer.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_customer>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_product.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_product>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_territory.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_territory>.
READ TABLE lt_dd03t INTO ls_dd03t with KEY DDTEXT = c_time.
ASSIGN COMPONENT ls_dd03t-FIELDNAME OF STRUCTURE <ls_data> to <l_time>.
CASE <l_keyfigures>.
 WHEN c_sd.
 PERFORM DATE_CALC USING <l_signdata> CHANGING LV_DATE.
 ls_period_term-start_date = lv_date.
 WHEN c_ed.
 PERFORM DATE_CALC USING <l_signdata> CHANGING LV_DATE.
 ls_period_term-end_date = lv_date.
 WHEN c_uplift.
 LS_PRODUCT_KF-ID-CONTENT = c_uplift_qyts.
 LS_PRODUCT_KF-VALUE = <l_signdata>.
 LS_PRODUCT_KF-YEAR = lv_week(4).
 LS_PRODUCT_KF-CALENDAR_PERIOD_ORDINAL_NUMBER = lv_week+4.
 APPEND LS_PRODUCT_KF TO LT_PRODUCT_KF.
 WHEN OTHERS.
 PERFORM DATE_CALC USING <l_signdata> CHANGING LV_DATE.
 ls_period_term-start_date = lv_date.
Get week
 CALL FUNCTION 'DATE_GET_WEEK'
 EXPORTING
 DATE = LS_PERIOD_TERM-START_DATE
 IMPORTING
 WEEK = LV_WEEK.
append Keyfigure
 LS_PRODUCT_KF-ID-CONTENT = <l_keyfigures> .
 LS_PRODUCT_KF-VALUE = <l_signdata>.
 LS_PRODUCT_KF-YEAR = lv_week(4).
 LS_PRODUCT_KF-CALENDAR_PERIOD_ORDINAL_NUMBER = lv_week+4.
 APPEND LS_PRODUCT_KF TO LT_PRODUCT_KF.
append tradespend
 SELECT SINGLE * FROM /SPA/SPEND_MAP INTO CORRESPONDING FIELDS OF LV_/SPA/SPEND_MAP
 WHERE KEY_FIGURE = <l_keyfigures>.
 IF sy-subrc = 0.
 LS_TRADE_SPEND-TYPE_CODE-CONTENT = LV_/SPA/SPEND_MAP-SPEND_TYPE.
 LS_TRADE_SPEND-CATEGORY_CODE-CONTENT = LV_/SPA/SPEND_MAP-SPEND_CATEGORY.
 LS_TRADE_SPEND-METHOD_CODE-CONTENT = LV_/SPA/SPEND_MAP-SPEND_METHOD.
 APPEND LS_TRADE_SPEND TO LT_TRADE_SPEND.
 else.
 lv_flg = 'X'.
 ENDIF.
ENDCASE.
AT END OF /B28/S_D1DVOX5. "
 SELECT SINGLE * FROM /SPA/SO_TER_MAP INTO LS_/SPA/SO_TER_MAP WHERE TERRITORY = <l_territory>.
 IF sy-subrc = 0 AND lv_flg IS INITIAL.
Create the GUID for TP's
 CALL FUNCTION 'GUID_CREATE'
 IMPORTING
 EV_GUID_32 = LV_GUID_MESSAGE.
 TRY.
 CALL METHOD CL_GDT_CONVERSION=>GUID_OUTBOUND
 EXPORTING
 IM_GUID_C = LV_GUID_MESSAGE
 IMPORTING
 EX_VALUE = LV_UUID_MESSAGE.
 CATCH CX_GDT_CONVERSION .
 ENDTRY.
populate the product
 LS_PRODUCT-ID-CONTENT = <l_product>.
 LS_CUSTOMER-ID-CONTENT = '300022'.
 LS_CUSTOMER-ROLE_CODE = '00000105'.
 LS_PRODUCT-KEY_FIGURE = LT_PRODUCT_KF.
 APPEND LS_PRODUCT TO LT_PRODUCT.
 APPEND LS_CUSTOMER TO LT_CUSTOMER.
 APPEND LS_DESCRIPTION TO LT_DESCRIPTION.
 APPEND LS_PERIOD_TERM TO LT_PERIOD_TERM.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-SALES_AREA-ORGANISATIONAL_CENTRE_ID = LS_/SPA/SO_TER_MAP-SALES__ORG.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-SALES_AREA-DISTRIBUTION_CHANNEL_CODE-CONTENT = LS_/SPA/SO_TER_MAP-DIST_CHANNEL.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PLANNING_ACCOUNT-CUSTOMER_INTERNAL_ID = <l_customer>.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PLANNING_PROFILE_GROUP_CODE-CONTENT = '4TPM'.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-TYPE_CODE-CONTENT = 'Z002'.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-UPLIFT_ACTIVE_INDICATOR = 'X'.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PLANNING_INFORMATION-MARKETING_PROJECT_PLANNING_PRO = '5'.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PLANNING_INFORMATION-CALENDAR_UNIT_CODE = 'WEE'.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-TRADE_SPEND = LT_TRADE_SPEND.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PARTY = LT_CUSTOMER.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-DESCRIPTION = LT_DESCRIPTION.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PLANNING_INFORMATION-PRODUCT = LT_PRODUCT.
 LS_TRADE_PROMOTION-TRADE_PROMOTION-PERIOD_TERM = LT_PERIOD_TERM.
 LS_TRADE_PROMOTION-MESSAGE_HEADER-ID-CONTENT = LV_GUID_MESSAGE.
 LS_TRADE_PROMOTION-MESSAGE_HEADER-UUID-CONTENT = LV_UUID_MESSAGE.
 LS_/SPA/REPORT_TAB-SPA_TP_ID = <l_bbtype>.
 LS_/SPA/REPORT_TAB-MESSAGE_ID = LV_GUID_MESSAGE.
 LS_/SPA/REPORT_TAB-CREATE_DATE = SY-DATUM.
 INSERT /SPA/REPORT_TAB FROM LS_/SPA/REPORT_TAB.
 APPEND LS_TRADE_PROMOTION TO LT_TRADE_PROMOTION.
 OUTPUT-TRADE_PROMOTION_CRMBULK_CREATE-TRADE_PROMOTION_CRMCREATE_REQU = LT_TRADE_PROMOTION.
 CLEAR : LT_DESCRIPTION, LT_PERIOD_TERM,LT_CUSTOMER, LT_PRODUCT, LT_PRODUCT_KF, LT_TRADE_SPEND,LS_/SPA/HEADER_TAB.
 ENDIF.
 CLEAR lv_flg .
ENDAT.
ENDLOOP.
My problem is AT-END OF STATEMENT IS executing for each and every record of same /B28/S_D1DVOX5.
Please help me from this problem

Hello,
First of all to know clearly about AT END.
Let's say In IT_DATA fields are F1 F2 F3 /B28/S_D1DVOX5 F5.
then AT END of /B28/S_D1DVOX5 means for each new value of this field at the end it will trigger.
Please ensure thet IT_DATA is sorted by this field and then used Control break.
Thanks,
Pramod

What happen if i use controll break statement in between select & endselect

Hi all,
what happen if i use controll break statement in between select & endselect ?
Thanks in Advance
KR

Hi for reference u can go through this code example
data:
fs_tab like sflight.
data:
   t_tab like standard table of fs_tab.
   select * from sflight into table t_tab.
   loop at t_tab into fs_tab.
     write: / fs_tab-carrid.
   endloop.
   refresh t_tab.
   clear fs_tab.
   select * from sflight into fs_tab.
     at new fs_tab-carrid.
       append fs_tab to t_tab.
     endat.
   endselect.

Smartforms, how to use control break events

Please help with this requirement.
Purchase Docu No.111
Pur Item No       Mat no       Quantity
1                        2356      2000
2                     1256      2000
3                     8556      2000
Purchase Docu No.112
Pur Item No    Mat no    Quantity
1                      9656      2000
2                      7356      2000
3                      1356      2000
Purchase Docu No.113
Pur Item No    Mat no    Quantity
1                      5356      2000
2                      8356      2000
This i have to design for the smartform.
1 header data then its item data.
like is Script i can call the WIndow elements using control break events in the driver prog but how to get this kind of output in Smartforms.???????
Thanks

I dont want trigger new page.
In the same page i want like this
I have purchase docu data in only 1 internal table.
So, for every new VBELN, under this i want its corresponding item details.
I have created the command node for the main window with 2 rows, in the 1st row i am giving VBELN and in the 2nd row i am giving in item details like item no, matnr etc etc and in the condition its askng Field name and Comparison Value.
How shold i give condition.??????
Thanks
Edited by: Jalaaluddin Syed on May 1, 2008 5:03 PM

Interactive report with control break displays no data, until control break is unchecked

Hello,
I have an interactive report that is base upon a collection. When one first access the page the report shows no data(no errors are given) and the control break box is red. Once the control break box is unchecked, all the data is shown. Furthermore, navigating to another page causes the same issue.
Any idea into how I can solve this issue will be appreciated.
Thank you,
Apex 4.2
Oracle 11g 2.0.3
Apache Tomcat
Guyenko

Vincent,
The aggregates are applied to each control break group, or, if you don't have any, then they're applied to the full report. So, in your case the "count" (= count of non-null values for a column, same as in SQL) should mean there is 1 non-null value in each group.
Does that description match what you're seeing?
- Marco

"Source not found" Error creating URL Data control with query parameters

Hi,
I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
Just dont know what could be the issue. Please help
Thanks

Hi,
xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
Frank

Control break behavior

Hi,
Can anyone tell if there's a way to override the default behavior of Control Break?
In my report (a schedule), I have a column that holds the values for days (monday, tuesday, etc.).
I want to control break on that column but keep the resulting grups ordered in a natural order (monday first, tuesday second and so on).
I can write the sql that generates my report that way by using decode, but once I Control Break apex is applying a new order by clause on my report, destroying my order.
Any ideas on how to tell apex how to order for control break using decode, or how to disable ordering entirely when I use Control Break on a specific column?
Thank you!
Edited by: user2130586 on May 17, 2012 6:40 AM
Edited by: user2130586 on May 17, 2012 6:41 AM

Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already).
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
When asking a question about "reports" it's firstly essential to differentiate between standard and interactive reports. Which is it?
I suggest you take advantage of the opportunities provided by apex.oracle.com and reproduce the problem there...

Control break query

Similar Messages

Maybe you are looking for