Control break statement for more than one fields

How can I accomodate more than 2 fields in control break statement?
e.g. if I want to have control on these fields land1 plant , how can I use it in At statement?
Thanks

Hey Marcin,
If you define the table as:
DATA:
BEGIN OF ITAB OCCURS 0,
LAND TYPE LAND1,
WERKS TYPE WERKS_D,
END OF ITAB.
Then AT NEW WERKS will be triggered whenever there is change in either LAND or WERKS:
LOOP AT ITAB.
AT NEW WERKS.
ENDAT.
ENDLOOP.
So
If you want to use both field as one, you will need to create another field and hold there concatenation of LAND1 and PLANT
is not required.
Correct me if i am wrong
BR,
Suhas
Edited by: Suhas Saha on Feb 15, 2010 3:14 PM

Similar Messages

How to assign values for more than one field

Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
      Assign (fieldname) to <l_field>.
      <L_FIELD> = 'ZB'. " value according to your requirement
      Assign (fieldname1) to <l_field1>.
      <L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
Brahmaji

Hello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD

Dynamic Filter SAP HANA - For more than one field

Hi Guys,
    Is their any way we can apply filter for more than one field. Lets take below example i want to apply filter both on PERNR & DOJ. I am able to apply filter on PERNR but when i try to create filter on more than one field (PERNR & DOJ ) it throws me some error.
Please let me know how we can achieve this.
OUT_EMP_SAL = SELECT A.PERNR, A.DOJ, A.FNAME, B.SALARY FROM "SAPH74".EMP_INFO A
INNER JOIN "SAPH74".EMP_SAL B
ON A.PERNR = B.PERNR;
OUT_EMP_SAP = APPLY_FILTER(:OUT_EMP_SAL, :IN_PERNR )

Hi Lakshmi,
You may need to use the end while calling, i took the same example from the "Help" in hana.
CREATE PROCEDURE GET_PROCEDURE_NAME (IN filter NVARCHAR(100), OUT procedures outtype)
AS
BEGIN
    temp_procedures = SELECT SCHEMA_NAME, PROCEDURE_NAME FROM SYS.PROCEDURES;
    procedures = APPLY_FILTER(:temp_procedures,:filter);
END;
CALL GET_PROCEDURE_NAME(' SCHEMA_NAME = ''SYS'' AND PROCEDURE_NAME like ''TREX%''', ?);
Regards,
Krishna Tangudu

At Line-selection in ALV for more than one field.

How to use At Line-selection in ALV Basic Report where there are more than one field for displaying Secondary Lists.
Ex: In Basic List there are 3 fields Volume_m Volume_y and Volume_i.When i click on any of the field i need to display the secondary list for that particular field.

Hi Pavan,
              Use User-command event of ALV.
Refer this code :
form BUILD_EVENTCAT using    p_i_eventcat TYPE SLIS_T_EVENT.
DATA: I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = P_I_EVENTCAT
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear I_event.
read table p_i_eventcat with key name = slis_ev_user_command into I_event.
if sy-subrc = 0.
    move 'USER_COMMAND' to I_event-form.
    append I_event to p_i_eventcat.
endif.
form USER_COMMAND' using p_ucomm type sy-ucomm
                           p_selfield type slis_selfield.
case p_ucomm.
WHEN '&IC1'.                       "&IC1 is the Fcode for double click
Use P_ELFIELD-VALUE for further processing . this will contain the value on which u will double click
endcase.
Reward points if helpful.
Regards,
Hemant

How to configure EM Grid Control for more than one databases?

Hi,
I'm configuring EM on Oracle 10gRel1 on Linux. I have more than one databases in the server, and I want use IE at my PC to monitor the databases on Linux server. I can configure and access the Grid Control Console by emca for first database, but cannot configure for the second one, unless I remove the first one configurration. How can I configure EM for more than one databases?
Thanks.

Thank you everybody.
Yes, I'm talking about DBConsole rather than Grid Control (sorry for misuse the term). I managed to set up DB Console for every DB in the same Linux box (10Rel1). What I did is:
1) stop db console and agent with emctl
2) remove repository with RepManager
3) config with emca
Then I can monitor individual databases from my PC (but have to login with different port).
I'm thinking mybe I should use Grid Control instead.

Hotspot on more than one fields in ALV Report

I want to add Hotspot on more than one field in ALV,
one field is Vbeln , one is BSTNK, one is matnr and so on.
i have used form user_command.and have written coding for Vbeln (on vbeln i am showing transaction VA02)
i want to pass an eror mesaage when user clicks on bstnk or matnr.
Thanks

Hi Lovleen,
*Global definitions *
Data Types
type-pools: slis.
types: begin of tp_data,
ebeln like ekko-ebeln,
*matnr like ekko-matnr,
*meins like ekko-meins,
lifnr like lfa1-lifnr,
chk1,
       end of tp_data,
       tp_tbl_data type standard table of tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
data: it_data type standard table of tp_data.
Heading of the report.
data: t_heading type slis_t_listheader.
======================= Selection Screen ==========================
selection-screen: begin of block b1 with frame title text-t01.
DATA: w_aux_ebeln like ekko-ebeln.
SELECT-OPTIONS s_ebeln for w_aux_ebeln
DEFAULT 1000 .
DATA: w_aux_lifnr like lfa1-lifnr.
SELECT-OPTIONS s_lifnr for w_aux_lifnr
DEFAULT 00000001000 .
selection-screen: end of block b1.
======================== Event Blocks =============================
at selection-screen.
start-of-selection.
perform get_data using it_data.
end-of-selection.
perform build_alv using it_data t_heading.
======================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
form get_data using t_data type tp_tbl_data.
SELECT e~ebeln
*e~matnr
*e~meins
l~lifnr
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM ekko as e
inner join lfa1 as l on elifnr = llifnr
WHERE e~ebeln in s_ebeln
AND l~lifnr in s_lifnr
endform.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
form build_alv using t_data type tp_tbl_data
                     t_heading type slis_t_listheader.
ALV required data objects.
data: w_title   type lvc_title,
      w_repid   type syrepid,
      w_comm    type slis_formname,
      w_status type slis_formname,
      x_layout type slis_layout_alv,
      t_event    type slis_t_event,
      t_fieldcat type slis_t_fieldcat_alv,
      t_sort     type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
Field Catalog
perform set_fieldcat2 using:
1 'CHK1' 'XFELD' space space space 'Select' 'Select this row' 'Sel'
'Select this row' space space space 'X' 'X' space t_fieldcat,
2 'EBELN' 'EBELN' 'EKKO' space space space space space space space
space space space space space t_fieldcat ,
3 'MATNR' 'MATNR' 'EKKO' space space space space space space space
space space space space space t_fieldcat ,
4 'MEINS' 'MEINS' 'EKKO' space space space space space space space
space space space space space t_fieldcat ,
5 'LIFNR' 'LIFNR' 'LFA1' space space space space space space space
space space space space space t_fieldcat .
Layout
x_layout-zebra = 'X'.
Top of page heading
perform set_top_page_heading using t_heading t_event.
Events
perform set_events using t_event.
GUI Status
w_status = ''.
w_repid = sy-repid.
Title
w_title = <<If you want to set a title for
            the ALV, please, uncomment and edit this line>>.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = w_repid
      it_fieldcat              = t_fieldcat
      is_layout                = x_layout
      it_sort                  = t_sort
      i_callback_pf_status_set = w_status
      i_callback_user_command = w_comm
      i_save                   = 'X'
      it_events                = t_event
      i_grid_title             = w_title
    tables
      t_outtab                 = t_data
    exceptions
      program_error            = 1
      others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
form set_top_page_heading using t_heading type slis_t_listheader
                                t_events type slis_t_event.
data: x_heading type slis_listheader,
      x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = ''(001).
append x_heading to t_heading.
Program name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Program: '.
x_heading-info = sy-repid.
append x_heading to t_heading.
User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.
Date of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
write sy-datum to x_heading-info.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
write sy-uzeit to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
form set_events using t_events type slis_t_event.
data: x_event   type line of slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
endform.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
                     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-up = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
   p_colpos: Column position.
   p_fieldname: Field of internal table which is being described by
*            this record of the field catalog.
   p_ref_fieldname: (Optional) Table field / data element which
*                describes the properties of the field.
*                If this field is not given, it is copied from
*                the fieldname.
   p_ref_tabname: (Optional) Table which holds the field referenced
*              by <<p_ref_fieldname>>.
                  If this is not given, the parameter
                  <<p_ref_fieldname>> references a data element.
   p_outputlen: (Optional) Column width.
   p_noout: (Optional) If set to 'X', states that the field is not
*           showed initially. If so, the field has to be
            included in the report at runtime using the display
            options.
   p_seltext_m: (Optional) Medium label to be used as column header.
   p_seltext_l: (Optional) Long label to be used as column header.
   p_seltext_s: (Optional) Small label to be used as column header.
   p_reptext_ddic: (Optional) Extra small (heading) label to be
*                used as column header.
   p_ddictxt: (Optional) Set to 'L', 'M', 'S' or 'R' to select
              whether to use SELTEXT_L, SELTEXT_M, SELTEXT_S,
              or REPTEXT_DDIC as text for column header.
   p_hotspot: (Optional) If set to 'X', this field will be used
*             as a hotspot area for cursor, alolowing the user
*          to click on the field.
   p_showasicon: (Optional) If set to 'X', this field will be shown
                 as an icon and the contents of the field will set
*             which icon to show.
   p_checkbox: (Optional) If set to 'X', this field will be shown
               as a checkbox.
   p_edit: (Optional) If set to 'X', this field will be editable.
   p_dosum: (Optional) If set to 'X', this field will be summed
            (aggregation function) according to the grouping set
            by the order functions.
   t_fieldcat: Table which contains the whole fieldcat.
FORM set_fieldcat2 USING
      p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given
   is a data element.
If p_ref_tabname is given, the ref_fieldname given is a
   field of a table.
In case ref_fieldname is not given,
   it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
    wa_fieldcat-input     = 'X'.
    wa_fieldcat-edit     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
======================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    i_logo             = <<If you want to set a logo, please,
                         uncomment and edit this line>>
      it_list_commentary = t_heading.
endform.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
form user_command using r_ucomm     like sy-ucomm
                        rs_selfield type slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
   WHEN '&IC1'.
     Set your "double click action" response here.
     Example code: Create and display a status message.
     DATA: w_msg TYPE string,
           w_row(4) TYPE n.
     w_row = rs_selfield-tabindex.
     CONCATENATE 'You have clicked row' w_row
                 'field' rs_selfield-fieldname
                 'with value' rs_selfield-value
                 INTO w_msg SEPARATED BY space.
     MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
endform.                    "user_command
Reward Points if useful.
Regards,
Manoj Kumar

How do people register for more than one person on a form?

We had a lot of complaints last year from organizations who sent several employees to our training. It took a long time for them to process these one at a time. How do people register for more than one person on a form?

Hi thearcca,
This entirely depends on the form you create, you can add multiple choice button and ask for the no. of employees the organization wants to register.
Also, you can add corresponding text field for the names.
Thanks,
Vikrantt Singh

When designing, how do I copy more than one field at a time?

How do I copy more than one field at a time?

Hi,
You can use the Ctrl or Shift modifier keys to select multiple form items. Ctrl+click toggles the selected state of the item. Shift+click selects a range of form items.
Regards,
Brian

NetBeans VWP: help w/ AJAX, is it possible to refresh more than one field?

I have a form with lots of fields. Some of them the value is retrieved from the database, for example the service field, where the user types the service id and at the onChange event the form is submitted, executing the processValueChange handler. In this handler the service data is retrieved from the database and a static text with the service name and a static text with the service price are updated.
I'm trying to do this with AJAX, so at the onChange event of the service id text field I have the following:
document.getElementById('form1:stServiceName').refresh('form1:tfServiceId');
document.getElementById('form1:stServicePrice').refresh('form1:tfServiceId');It works, but the processValueChange handler is executed 2 times, and that's a problem...
Isn't there any way to refresh more than one field? With something like this for example:
document.getElementById('form1:tfServiceId').submit();
document.getElementById('form1:stServiceName').refresh();
document.getElementById('form1:stServicePrice').refresh();Thanks for any help,
Felipe

You may want to try creating your own custom popup lov
http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html
you can then create your own lov report listing all people and then when you click the name required you can passback as many values as required to the calling form.

Blocking Goods Receipt for more than one PO

Dear All,
We have a requirement. We do not want to do goods receipt for more than one PO.STD SAP is allowing us to do the same.
Can we block it ? We want one One Material Doc for One PO .For One PO there can be more than one material document but vice versa must not be allowed.
Thanks & Regards
Abhijit Das

seems to be possible with custom development
logic may be as follows
This is just a generic suggestion
If I put PO number and press enter then the field where we put PO should become grey...
take help of abaper to findout the way.....
GIVE A TRY.....

How to group by more than one fields in crystal reports

Hi
How to create groups in crystal reports by more than one fields, like
select fields,aggregate functions from table group by a,b,c

Not sure if I understand your question, but you you could create a formula to generate the string of data you want to group on. Then simply create a group based on the formula field.
For example, your formula could do something like (assuming all String fields):
{table1.FirstName} + {table1.LastName} + {table1.DateOfBirth}
, and then group on this formula.
-MJ

How to create Criterian For more than one table

Hi,
I have one problem how to create criteria for more than one table in that using one criteria hot to get the values from database in that more than onetable for getting these values .Please send me the exampke code.
reagrds,
raghu

Hi,
I don't think its possible to create fieldcatalog for different tables,
but if you want to do so create a dummy table which has all the fields which you want in fieldcatalog.
populate the data from different table to that dummy table
then create fieldcatalog for that table and pass it in the function module...
Regards,
Siddarth

Allow for more than ONE item in a single row?

Allow for more than ONE item in a single row? I can't use this wonderful program unless I can get more than one field on a row (i.e. 1st name, mi, last name etc)

Thanks for your feedback. This is something we definetely want to provide next year (can't say when yet).
If others are interested in this feature please vote on it within the idea tab: http://forums.adobe.com/ideas/1046
That helps us prioritize our work based on customer demand.
Randy

If-function for more than one cell

Hello friends,
I am looking for an if-function that asks for more than one cell. EG:
=If(A2=True;50;0) were A2 is a marker field. In my table A3, A4 and A5 are markerfields as well. How do I add those cells to my my function. Saying: Is any of A2-A5 true, than say 50 else say 0.
As a second question:
Is there a function that says: If A2 is true give me 50, if A3 is true gimme 40 ... all in one function!?
Thanks a lot for helping me !!
Jimmy

The answer to both is yes you can perform these using functions that exist in Numbers:
1) You can use check boxes for the marker cells then use cells in the next column to translate from check boxes to a numeric value:
e.g. B2 = if(A2=TRUE, 1, 0)
then sum the cells in B2 - B5 and compare to 0. if the sum is greater than zero then one of the check boxes is checked:
2) The question with this request is what if more than one marker is set (again I am assuming you are using check boxes)
I am assuming the A2 take precedence (that is if the checkbox for A2 is checked that the result will be 50 EVEN if A3 is checked)
A1 = IF(A2=TRUE, 50, IF(A3=TRUE, 40, 0))

Reason for more than one sales organisation

Hi,
What can be the different reasons to suggest the client for more than one sales organisation.Please reply ASAP.
Regards
Prabudh

hi,
Sales orgainsation controls the entire business process.
Example : If u have Domestic factory sale , Domestic depot sale , Export , Deemed export , intercompany sale , stock transfer ...etc . This can be controled through maintaining different Distribution channels .
And , the same way ,based on material group you can differ division to have more control.
Disadvantage : Having more sales organisations will lead to have more master data .
saravanan

Control break statement for more than one fields

Similar Messages

Maybe you are looking for