Control Center Help...

So I updated my iphone 4 to ios 7 and the control center is always grey instead of being translucent and being blurry and seeing like the colors of whats behind it. Anyone have a solution?

Hello KittyKats1125,
Thank you for using Apple Support Communities!
It sounds like a new feature called Increase Contrast is turned on.
Increase text contrast on difficult backgrounds when possible. Go to Settings > General > Accessibility and turn on Increase Contrast.
From: iPhone User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Keep in mind that if your background is white or a light color, it will not appear to be translucent, and be more opaque.
Cheers,
Sterling

Similar Messages

Bootcamp - Catalyst Control Center - help me!

Hello, I've tried to install catalyst control center for windows 7 bootcamp, I can't seem to find the download for the actual program, I only find the drivers for it, I did find the program once, and installed it, but then I only had 2 different tabs in there, and there should be atleast 7+ with alot of options. I had close to none, in my install of the program, so I uninstalled the whole thing and now I can't seem to find it again.
I've installed the latest driver for the program now, but I cannot find the program...
And ofcourse I want to find out why I only had 2 tabs in there, when I should have had 7+
Please help me
- Anton

Is it these old drivers?
http://forums.macrumors.com/showthread.php?t=1151529
Might repost over here...
https://discussions.apple.com/community/windows_software/boot_camp

ATI Catalyst Install Manager and catalyst Control Center Help

I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7

You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine.

HP DV7 6135dx. Can't install ATI Catalyst Control Center. Need help!

Hi! Have laptop HP DV7-6135dx. Windows 7 x64 Ultimate. I can't install Catalyst Control Center.I see in "Hardware" Mobile Intel(R) HD Graphics and Radeon (TM) HD 6490M like video adapters. Both this cards look like drivers installed completely.
I'm trying to install CCC to have choice to select one or another card.I've download all video drivers for this laptop model.I've try to install:1. AMD High-Definition Graphics Driver 8.830.6.2000 Rev. Oct 5, 20142. AMD High-Definition Graphics Driver 8.882.2.3000 Jul 31, 20143. Reference driver 12-10_mobility_vista_win7_win8_64_dd_ccc_whql_net44. Autodetect ATI Driver Software and it was install some driver.Always i have error message "Application Install:install package error" and installation process interrupted. I've try to fully uninstall all video drivers and install them from beginign, have try to clean system and registry by CCleaner, i think i've try everything but can't install CCC. It's always stuck with error.This is log ATI CCC screen Before i have install new Windows 7 i have seen on previous Windows 7 Catalyst....I don't know why i can install it. Can you help me please?

, Hello and thanks for posting on the HP support forums. If you are downloading this from the AMD site it may not work. The video chipset is built by AMD Radeon however it is propriatary. Unless you download the software for the system from the notebooks support site it may not work. As well you have to check to see if that notebook was released or was given windows 7 as an os. Here is the link to the support page. HP Pavilion dv7-6135dx Entertainment Notebook PC - Software and Drivers If your system came with it pre- loaded then you can do a system recovery to get it back. You will have to back up all your data before this. HP PCs - Performing an HP system recovery (Windows 7) Please let me know how things go. Thanks again for posting and have a great day.

Help catalyst control center

message comes up: catalyst control center host application has stopped working. Videos sound but no picture?

Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
- Peter

ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
Thank you in advance.

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

Help for upgrading runtime to control center

hi guys,
I am upgrading runtime repository (10g r1) to control center (10g r2). while moving the audit data, I get the error message "Failed to Migrage Audit Data into OWBRTR. java.qal.SQLException ORA-00001: unique constraint (OWBRTR.AMP_PK) violated".
I check the orginial runtime repository, and all these unique constraints are enabled. so I assume that there should not be any duplicates there. How does it possible to having duplicates when I doing the upgrade?
does anybody met this error before? how can I resolve it?
thanks so so so much

Hello
Even I was getting almost similar problem. Once you solve please let us know.
Mine is like this
Error Created while moving audit data from existing runtime repository to Control Center
Using OWB Control Center Upgrade Assistant. Here OWBRTR2TST is Runtime repository in
Control Center.
Exception:
Failed to Migrate Audit Data into OWBRTR2TST java.sql.SQLException: ORA-02298:
Can not validate (OWBRTR2TST.co.FK_PARENT_CO) - parent keys not found
ORA-06512 at line 16

Airplay toggle does not appear in control center on ios7 neither on my iphone 5 nor my iPad 3, can anyone help please

On iOS 614 I used to have airplay toggle, when upgrading to iOS 7 it disappear on both my iphone 5 and iPad 3,

Place your finger at the bottom of the screen and swipe up. A "control center" screen will appear and you will have the options you are looking for plus a few others easily accessible. Airplay device must be turned on, of course.

Control center ios 7 music controls not working help

When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

I also experience this issue. Soft reset of the phone corrects the issue temporarily. However it will reoccur in time. It seems ultimately Apple will need to fix this with an iOS7 update.
I have noticed several bugs (this being one of many that I am reporting) since upgrading to iOS7 which has been very disappointing. I am a huge Apple advocate and this has not been the experience of "It just works" that I have come to expect from my Apple products. It is because I care so much about the Apple ecosystem that has made my work and play so much more enjoyable that I will take the time to report these in hopes that Apple will take notice and that subsequent updates will address these issues.

EA6500 - USB Control center - Could not find router when hooked up wirelessly

Not sure if this is the right place but I felt it should be posted somewhere on the internet.
I recently purchased a Linksys EA6500. I decided to try to hookup my printer through the it. I installed the USB Control Center and had some issues with it. It wouldn't detect my router. All I would get is "A compatible router with USB port was not found on your network".
When I hooked up my laptop to the ethernet port I was then able to get a connection to the router with the software. If I left my Wireless connection on while I did this I would unplug my computer ethernet the USB Control Center remained connected until I closed the software. When I reopened it could not see the router again. I tried on another laptop and it was working correctly.
At this point I started my research into the software and noticed in the help menu 2 things.
1) the software was made by belkin
2) they had other thing hooked up including keyboard and mice
http://i.imgur.com/6NAQ5Jv.png
With this information I decided to try to make troubleshooting a bit easier by using a Lenovo Multimedia Remote with Keyboard N5902. I tried it on the second laptop that had no problems first and it kinda worked. The keyboard part worked and the mouse didn't. So I went to the computer that had issues connecting hooked it up via eithernet to test and I blue screened it. The dump file said the "AMD USB Filter Driver" crashed.
This lead me to 3 areas I need to troubleshoot on this laptop.
1) USB Control center
2) My Wireless adaptor (Atheros AR9285)
3) USB Drivers
First thing I did was troubleshoot the AMD USB Filter since that did blue screen. The USB drivers on this computer are a mess. I have the standard A6 chipset drivers, the vmplayer virtualized usb drivers and then the virtual drivers for the USB Control Center. I updated what I could (Still crashed) and in the end used the Catalyst Install Manager to remove the AMD USB Filter driver and the Lenovo N5902 kinda started to work. On this computer the Mouse part worked and not the computer. Not worried because I did not have to run to the printer (wasting paper) and router all the time to keep troubleshooting.
The next thing I did was update my wireless drivers since it was the wireless portion that was having issue and not the ethernet. This did not work.
Finally I came back to the USB Control Center software. The Driver it is using is called "SXUPTP Driver" in the System Devices catagory. There were no downloads availible on the Linksys site for the software so I went to belkin and downloaded there latest version. I installed it and had the same issue. can detect the router wired but not wireless. I then look to the Driver manufacturer, Silex Technologies. They had no product called USB Control Center. Googled SXUPTP and a Microsoft page refed to "SX Virtual Link" made by Silex.
http://silexamerica.com/campaign/sx-virtual-link-downloads/
I extracted the drivers and installed them. USB Control center still has the same problem. Installed SX Virtual Link software and it works.
http://i.imgur.com/7wSEq8i.png
It works really well. I decided to hook up a USB Hub and put on different devices to see what I can do. The only Disapointment was the Microsoft Lifecam Cinema was not found. If did find a few other random things.
http://i.imgur.com/aBI66jY.png
The only downside is that With the USB hub the router can no longer find USB storage devices to act like a nas. I'm ok with that since I did not like the idea of router in control of internet data sharing. I am ok with the fact that I can still hook up a thumbdrive via SX Virtual Link. In fact thumb drive not reconized by the usb storage in the router can be used via the SX Virtual Link. What I'm looking at now is hooking up an external DVD drive to it for devices that do not have drives. SX Virtual Link DOes reconized when a device is in use by a computer running USB Control center. there is no compatibility uses.
I am using Windows 7 64bit on an hp laptop with an A6 chipset connected wirelessly to an EA6500 router.
In short if you are having issues with USB Control center and your other drivers are up to date then just try the SX Virtual Link.
I felt this neede to go somewhere on the net.

Great Advice and solution Rob, it is working with your advice.
Thanks

Loading flat files located on a server using the Control Center piece ofOWB

Loading flat files from a server with OWB
I am successful loading files with OWB, as long as they resided on my workstation in the C:\ drive. I copied the files to a Linux server into directories owned by Oracle/oinstall, permissions on the directories containing the files are 777. I ran the OWB client from the server with the following results:
Error
RPE-01013: SQL Loader reported error condition, number 1.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
I tried to load the file using the control center from both the windows client and the server client. Can I do this from either one?
I can't import the file in the Design Center from the /u00/data/owb_repos1 directory, it does not show up.
If anyone has received similiar errors from OWB, please tell me how I can fix this. THANKS!!!
[d97886@owbtest owb_repos1]$ pwd
/u00/data/owb_repos1
[d97886@owbtest owb_repos1]$ ls -la
total 24
drwxrwxrwx 2 oracle oinstall 4096 Mar 19 12:14 .
drwxrwxrwx 18 oracle oinstall 4096 Mar 6 16:41 ..
-rwxrwxrwx 1 oracle garrett 1481 Mar 8 07:32 state_codes.csv
[d97886@owbtest owb_repos1]$

Hi
This is what i do for my flat files (i am loading my tables from the flat files):
1) Create location for the files in OWB and it should look something like \\path_to_where_the_files_are. Here you should be able to browse to your Linux box and select the location of the files.
2) Then check whatever you use (i use TOAD) and you should see in owb schema a directory created there which points to the location of the flat file.
3) then just follow the guide to sample the files etc and you are good to go.
Basically OWB has to be able to see the files that are on Linux machine.
Alternatively you can map your Linux share to your windows box (use samba or something) and use it that way.
Sorry if it is stating the obvious.
Hope this helps
Kind Regards
Vix

After downloading iOS 7 on iPhone 5 the control center won't open.

When I swipe up from the bottom, nothing happens. Both of the control center options are enabled in the settings. Help!

Do you have a bulky case with an edge near the bottom of the screen?
Lots of people describe this problem with Otterbox Defender and other thick cases.
https://discussions.apple.com/message/23015788

Brother Control Center installed but won't open

I have a Brother MFC 685-cw and it plays pretty well with the Image Capture application for scanning but I would like a few more options. I have been to the Brother website and downloaded and installed the CUPS Printer driver and the TWAIN Scanner driver for Mac OSX 10.6. They seem to have installed correctly. I have the Control Center application in my printer folder but when I click on it nothing happens. Help?

Goto this link on the adobe site for suggestions on how to
resolve no launch
isssue:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb181c10
gene
"swami moore" <[email protected]> wrote in
message
news:ej8k0p$ial$[email protected]..
> Windows XP Home, Dreamweaver 8 30-day trial installed OK
(?), click or
open on icon or Start program, nothing happens. Already
installed a second
time and rebooted.
>
> Help!
> Thanks,
>
> Alan

Windows 8.1-AMD Catalyst Control Center

Hello!
First of all I would like to start of by saying thank you Hp for an amazing product, I bought my Hp Envy m6 laptop in May and I have loved it ever since. I bought it as a gaming machine, and it did not disappoint me...until I decided to update to Windows 8.1.
I downloaded it from the app store last week to see what new features they added (was rather disappointed with how long it took especially for the lack of great features they added, however that is not your fault), after a day when I bought a new game from Steam (Arma Two) and I went to the Catalyst control center to set the performace to high I realized it had stopped working the message I got was:
"Catalyst Control Center cannot be started.
There are currently no settings that can be configured using Catalyst Control Center"
This means a lot go my games are running rather bad at the moment as they are using a mixture of my intergrated Intel 4000 "graphics card" and my AMD Radaen HD 2GB Graphics card. Instead of just my AMD graphics card (the good one).
I tried looking for solutions to this problem e.g. A new download for Catalyst Control Center or an easy way to downgrade to windows 8 from windows 8.1 however I have been unsuccessful. The only method that seems possibly is to downgrade however that would involve uninstalling all my programs (Over 50 games from steam) and all my other programs.
So the reason for this message is that I am looking for a solution to this problem, either an easy way to downgrade to windows 8 OR a way to get my Catalyst Control Center to work again so I can change what graphics card is used when.
Thank you
-Conor
P.s. I love Hp's products and I have told all my friends to get them. This is window 8's fault not yours.

Possible solution:
Hi Guys,
I just contacted HP support regarding this problem. They asked me to install the following file:
ccc2_install.exe
It was already present in my system in the following path:
"C:\Program Files\AMD\CCC2\Install"
This solved my problem. CCC is working fine now
Also, while installing, your desktop might go black and only active windows will seem to work. But, thats fine, just restart your system.
Hope this helps
Cheers...
Thanks and regards,
Saptarishi

Error while deploying objects from Control Center Manager

I got the error "The Network Adapter could not establish the connection"
while deploying my objects (dimensions, cubes, mappings etc) from Control Center Manager Oracle 10g R2.
Any idea to ressolve it..........

Some more details would be helpful ...

Control Center Help...

Similar Messages

Maybe you are looking for