Control Center Jobs - Workflow execution history not being shown

Hi all gurus,
We have recently migrated to owb 11.2 from 10.2. In DEFAULT_CONTROL_CENTER, we can see deployment history, but the "execution" tab is empty. Though we have executed several workflows, they are not shown in the execution TAB in "Control Center Jobs" window after they complete.
Any clue on what can be the problem? Where can I further investigate the problem?
Thanks you so much,
Inaki.

Is there any record in wb_rt_audit_executions? you can connect as OWBSYS, then set workspace to access the audit information.
If there are records and not displayed in the execution tab, then it must have some issues. Then should be looked into further.
Thanks,
Shawn

Similar Messages

HT5858 My control center is opaque gray and not translucent. Why?

My control center is opaque gray and not translucent. Also happens with my notification center.
I tried restoring several times but in the end is always the same.

A Community Specialist recommended to go to Settings -> General -> Accessiblity and turn off 'Increase Contrast' in this thread: https://discussions.apple.com/message/23026678
They also stated this:
"Keep in mind that if your background is white or a light color, it will not appear to be translucent, and be more opaque."

Planned Order for a Product not being shown

Hi Experts!!
I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
Please help me out. Your help is highly appreciated. Thanks a lot!!

Hi Srinivas,
With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
and COMMIT_CONTROL(should be 'E').
Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
Thanks,
Santosh KB.

Sent E-mails not being shown

Hi, I have a MBA and since yesterday all the e-mails that I have sent are not being shown in the sent folder. I sent one to myself and I got it so it must be working but how can I see them again after I sent them? Oh and the other problem is that search function does not work the way it used to. When I typed in one word it would show me all e-mails that had that word in them including the ones from e-mail adresses with which had the word in the adress.
Does anyone know how to get this to work?
That would be great! Thanks!
P.S.: English is not my native language, sorry for mistakes

Hi McGrey24,
A couple of important questions to get us on the right track.
1.) What type of email account are you using? Who's the service provider?
2.) What are you using to search? The Spotlight feature inside mail or the OS-wide Spotlight search?
The Mail search requires a little tweaking, by default it doesn't give you access to your entire account just specific mailboxes. There are ways to control if you want to search all mailboxes or if you're looking for the text string as the subject (or just content).

PDF Export Options not being Shown

Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
Pleae advise best course of action at this point.

before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
How to display the tabs in shared views also.
I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

Please update me if you can find any way to achieve this in BPM workspace

Non-Admin not being shown update button on XP

Non-Admin users on XP are not being shown the option to trigger an update.
The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it.
When a new update is available a link to the download page is shown in the About box rather than a button to start the update.

That is good. It would be better if that were the case with a standard account on Mac OS. I can no longer trust that button because it will start downloading an update if there is one, even though I disabled Firefox updates completely.

TS1468 Not being shown in recently release album

I recently submitted one album. This is not being shown in recently release album. What we need to do my album to be displayed in iTunes when user selects recently released albums.

Hi Bhakti,
The operation 01 is create, this means the mapping records are stuck in a create operation, i.e. something stopped the original mapping records creation and left an inconsistency in the catalog mapping tables.
I would suggest the following:
De-assign the mapping for the affected categories in the catalog authoring tool, once de-assigned, also execute the 'Map Content' selection and save/exit.
Then run report /CCM/CLEANUP_MAPPING in test mode to check for orphaned items or invalid mapping entries. If inconsistencies are found in test mode, run this again with the test flag removed.
Finally - re-map the categories again and perform content mapping. The items should then exist in the procurement catalog.

New Leave Request not being shown in UWL

Hi ,
I have an issue in which when manager tries to approve a leave request from UWL ,in the Pop up i,e in Request Waiting for approval" table the latest requests are shown but the same request are not being shown in the UWL.
I checked in SWI5 for the user and whatever leave requests are shown in popup are there for the user but the same is not updated in UWL.The user has refreshed the UWL but still it didnt show the new leave requests
I dont want to reregister the webflowconnector in UWL configuration as we generally use reregister to register a new task in the UWL .
Can someone please help me in resolving the issue.
Thanks,
Satish Kumar

Hi Siddharth,
Thanks for your reply.
DYNPARAM parameter value as suggested in the note 1140959 is already maintained against the tasks TS12300097 ,TS12300116.
we have done Refresh from the UWL iview but still its not showing the latest Leave Requests but it is coming in the popup window when one of the existing leave requests in UWL is selected.
Thanks,
Satish Kumar

How do I resolve the issue of a 2nd generation iPod touch not being shown on iTunes 11.4?

2nd generation iPod not being shown on iTunes 11.4
How do I resolve this issue? I have tried reinstalling after uninstalling it, nothing has worked for me any advice?

Well, go ahead and try every port, make sure to clean out the port with a q-tip, to make sure no dust is blocking the ports.
Then enter DFU, if iTunes doesnt recoginze it when your in DFU, that means you charging input is damadged.
Hope this help

Z77A GD 65- Control Center + Click BiosII updates now not working.

Hi, I have the Z77A GD 65 mainboard. Just switched on and there was an update for Live 5 so I installed that, I was then prompted to update Control Center and Click BiosII so I did so. When I try to run Click BiosII I get an error msg telling me that it as been removed and I cant run Control Center has it dosent seem to be present on my pc at all.

Quote
Still cant get it to work. It just stays on the splash screen and nothing seems to want to load. I am thinking that my orig bios update was no good, should I try the second bios?
Switch to your back up bios and see if all is well. If it is, uninstall live update and check the website periodically for updates.
If a bios update is nessesary: >>Use the MSI HQ Forum USB flasher<<
You may also switch to the other bios once the flash tool has loaded to re-flash the corrupted bios. In other words, boot using good bios into flash tool, when the screen comes up asking for input, reach in and switch to the bad bios. Proceed with flash.
Not a bad idea to run memtest first which is on the tool.

HT201317 my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel (version2 ) for activation. its not being activated. i tried many times but failed. i have activated photo stream on my iphone. please guide me

my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel on computer (icloud version2 ) for activation. its not being activated. i tried many times but failed. when i check the photo stream option and apply its shows that its ok. and after closing when i again open icloud panel the photo stream option remains unchecked that means its not activated. please guide me.

Had the same problem. I uninstalled icloud, restarted my pc and reinstalled icloud and it's working fine. Hope this helps.

HTML file is not being shown properly in the JEditorPane

Hi,
I am using JEditorPane to display an HTML file from the local disk. This HTML file contains the html tables. Now when this file is getting displayed in the JEditorPane, one top row grid is not being displayed in the editor pane. content of the row is there...but the column grid is missing. All other rows and columns are being shown but the first row-column grid which contains the heading for column.
Also when I m printing the content of this JEditorPane using Java Print API then no grid is being printed on the paper. content is coming properly but no table grids. when i have taken the print out of the original html file from the browser then table grids are being printed out properly.
Please do help me out in showing the HTML file in the JEditorPane properly and printing the same.
Many Thanks,
gshankar

Hi,
JEditorPane renders HTML with many limitations.
You can use JDIC for the same. refer: jdic.dev.java.net
But JDIC does not work on windows 98.
Anand

Down payment Invoice is not being shown in Credit Memo option

Hello Experts,
I want to make a credit memo against Down payment invoice, but it is not being Drawn by COPY TO option in Down Payment Invoice form and not being Drawn from COPY From option in AP Credit Memo form.
Please help
Thanks
Edited by: Shazad Nazir on Nov 20, 2008 8:45 AM

Hi,
Let me explain the steps I am following, for the problem I am getting. I directly goto Down Payment Invoice option and made a down payment invoice and then I try to use credit memo of that recently made Down Payment Invoice.
But same that Copy TO option is not enable.
Thanks & Regards,
Shazad Nazir

Control Center Jobs - Workflow execution history not being shown

Similar Messages

Maybe you are looking for