Control chart tolerance limits lines not shown

As Run chart displays values of Single result, SPC Control charts also Displays these reults with tolerance limit with Showing lines of uper and lower limit Tolerence. I have an issue while showing these lines .when i am doing result recording control charts Some times shows tolerance limit lines and some times not ? Kindly clarify me the SPC control chart process too?but my main question is that why SAP some times shows Results and sometimes not .
More over I already did all settings as below
Sapmling procedure with Fixed samples ,and SPC inspection crieteria,
Inspection plan -Inspection task list cahracterstics
MIC
      Sampling proceudre -active
      SPC - Active
      Required Chrac.-Active
      Single result -Active
      Fixed scope -Active
All settings of number ranges is set
Control chart 115 -Shewchart X bar is using .

Hi Vineeth,
We are using SPC inspection chars, in results recordin it is not calulating the control limits automatically. When i click to calculate the control limits, getting the message Control limits for track 1 could not be calculated.
Can you please let me know
1) The process flow for SPC inspection results recording
2) How to get the control limits automatically for SPC inspection chars.
3) System will require some results to calculate control limts, right? So, till system calculates those control limits, how system will valuate results (will it be with specificaiton limits specified at inspection characteristics level), do we have any option of entering preliminary results so that system can control limits on bases of those results and so from very first inspection lot we have control limits for valuation?
Thanks in advance
Bob

Similar Messages

Pan line not shown

The pan line in multitrack mode is not shown. Do I need to activate it somehow?

And that is referring to what prograsm? On what system? in any case, ask in the forum for whatever program it is that you are using...
Mylenium

Excel Chart High-Low Lines Not Rendering when Chart Object Contains No NumCache and StringCache

I have a number of Excel xlsx files which contain a Chart object configured with High-low Lines. The High-Low Lines render without issue when the Number Cache & String Cache exist in the file. A process updating the files removes the Number
Cache and String Cache from the Chart Object. After this process has updated the files Excel no longer observes the High-Low Line configuration. I have verified that the files still contain the setting for the Chart to have High-Low Lines (<c:hiLowLines
/>). Excel does not recognize that the setting is set (not rendered when viewed or preserved in the file settings after saving in Excel). Excel does not present any errors and everything else works fine.
Reproduction of Issue:
1. Create an Excel Document containing a Chart Object with High-Low Lines enabled.
2. Manually edit the chart1.xml file (in the xlsx file), removing all the Number Cache and String Cache entries from the document (<c:numCache/>, <c:strCache/>).
3. Open the Document in Excel and view the Chart. It will not draw the High-Low Lines and if saved the file will no-longer contain the hiLowLines setting.
The issue has been confirmed in Excel 2010 and Excel 2013.

The issue has been tested on different computers, 11 in total. The OS ranges from Windows 7 to Windows 8.1.
I have not tried in other file formats. Due to the requirements of the project I'm restricted to xlsx.
The application interacting with the files is proprietary.
I've simulated the issue by removing the Number Cache & String Cache manually from the Chart1.xml file. This causes the issue to occur. I will note that if i only remove one of the cache entries from the file the High-Low lines will be observed
in Excel. It seems to only happen if all of the cache entries are removed. The file is never interpreted by Excel as corrupt under any of the modifications.
The issue seems like Excel fails to evaluate the High-Low Lines property when the cache is completely removed. I'm not sure what Excel is doing to negate the property under the condition of no cache. After the files is opened with Excel and saved
the High-Low Lines property no-longer exists in the file.

Controlling Chart Axis limits in Interactive Report

I have set up a bar chart in an Interactive Report where the x-axis is supposed to be a percentage. Currently, the bar chart's x-axis goes out to 120. Is it possible to limit it to 100 without having to create a chart region?
Thanks in advance!

Hi Dimitri,
Firs of all thank you for your patience. I do not oblige you to answer or whatever. it was kind of showing you the error.
There are date columns but they were not selected for the chart.
SELECT
     a."FICHE_ID" "N°",
     b."AGENT_ID" "AGENT_ID",
     b."NOM" || ' ' || b."PRENOM" "Agent",
     a."EQUIPE_ID" "EQUIPE_ID",
     c."LIBELLE" "Equipe",
     a."DATE_ACTIVITE" "Journée",
     a."TOTAL_HEURES",
     a."TOTAL_HEURES_EXCEPTIONNELLES" "H. excep.",
     a."FICHE_CREE_PAR" "Fiche créée par",
        a."DATE_CREATION" "Le"
FROM
     "OBSERVATOIRE"."FICHE" a,
     "OBSERVATOIRE"."AGENT" b,
     "OBSERVATOIRE"."EQUIPE" c
WHERE
     a.AGENT_ID = b.AGENT_ID
AND     a.EQUIPE_ID= c.EQUIPE_ID
AND     (a.total_heures IS NOT NULL
         OR a.total_heures_exceptionnelles IS NOT NULL)
group   by a."FICHE_ID" , b."AGENT_ID" ,
        b."NOM" || ' ' || b."PRENOM" ,
           a."EQUIPE_ID" ,
           c."LIBELLE" ,
           a."DATE_ACTIVITE" ,
     a."DATE_CREATION" ,
     a."FICHE_CREE_PAR",
     a."TOTAL_HEURES",
     a."TOTAL_HEURES_EXCEPTIONNELLES"
ORDER BY
     a."DATE_CREATION" DESCThank you
PS if you want we stay here, no problem I you do not want to go further with this thread.

Spc control chart not showing UCL CL or LCL

Hi people,
I have an spc control chart within my app. However for some reason the UCL, CL and LCL aren't showing on my graph.
A brief background:
This is an app for people entering measurement data into several numberboxes the average of which goes onto the graph. These numbers generally vary from 32.0 to 28.0
The UCL is at 30.6 the CL at 30 and LCL 29.4 However none of these values are showing on the graph.
Has anyone used this control and know why I am having a problem here?
Rik
That glass?
Thats glass is neither half full or half empty....
Its twice the size it needs to be
Solved!
Go to Solution.

Hi Henrik,
Thanks for the contribution however this didn't seem to work. It may be worth noting that I am not using a waveform chart and instead am using a "control chart" which is included in the SPC package.
If I could work out how I would include a picture of my current code however print screen seems to have stopped working (odd eh?)
Basically I have an array going into X and another array going into Y
There is a control which is generated by the control chart called control chart lines. I have hooked up my limits to this.
I can find very little documentation on this control and so have hit a bit of a wall
Vielen Dank für Ihre Zeit
Rik
That glass?
Thats glass is neither half full or half empty....
Its twice the size it needs to be

Tolerance limits at Schedule line level in PO

Hi
How to make tolerance limits at schedule line level in PO, (not at item level)
Thanks
Raju

HI Raju,
In PO Delivery schedule qty tolerance is not possible.
PO delivery line itemwise tolerance only possible and also we have freezed tolerance in the line items.
Based on line item qty, We have delivery schedule given and not exceed line item qty.
Hope, you are clear.
K.Rajendran

How to generate control limits in control chart

I want to generate a X bar chart with control limits, sample size is Fix- 1.
SPC criterion I selected is 020 ie Task List characteristics/ Material.
1)Sampling Procedure I used- Fixed-1
2)Valuation mode I used- Attrib non conforming units/ manual.
3)Control chart I am using is 110- Shewart chart for X bar.
But when I click for control limits in chart it is saying control limits for track 1 could not be calculated.
Could anyone guide me, how to generate control limits for this graph. Sammple size will alwyas be 1.
Please let me know should I change control chart type in this case.

Hi Jaison,
You should use valuation mode - SPC valuation in sampling procedure.
Also you have to use sampling procedure with inspection points.
as practically every hour or depending on the frequency decided we collect the measurements and calculate the SPC.
now after correction in the sampling procedure create new inspection lot and check SPC.
try out and revert.
Regards,
Anil

Record not shown in table control

Hi experts,
I am working on the module pool program with a screen 0100. There is a table control called TABL_MATR in screen 0100.
There is no error while compiling the program. But no record shown when a record added into the table control.
I do not want to use the headerline in the program, because I intented to do it in OO way.
Record shown if I do like this:
DATA: ITAB_TRAY TYPE STANDARD TABLE OF LS_TRAY WITH HEADER LINE.
In PBO
loop at itab_tray " record show in the table control
whereas record not shown if do like this:
DATA: ITAB_TRAY TYPE STANDARD TABLE OF LS_TRAY.
In PBO
loop at itab_tray into wa_tray " no record show in the table control
Can someone guide me how to do it in the right way?
Please help.
Thanks in advance.

Hi all,
I have added the below images.
1) http://i566.photobucket.com/albums/ss106/wkw510/pic6.jpg
2) http://i566.photobucket.com/albums/ss106/wkw510/pic7.jpg
3) http://i566.photobucket.com/albums/ss106/wkw510/pic8.jpg
I have also followed what Devendra's suggested, however the same error message I get:
"ITAB_TRAY" is not a structure or internal table with header line.
As such I have changed the statement
module fill_table_control output.
MOVE-CORRESPONDING wa_tray TO itab_tray.
endmodule.
to
module fill_table_control output.
APPEND wa_tray TO itab_tray.
endmodule.
After changed, compiled no error.
But, when I started to use the program I got another error which closed the whole SAP screen.
Therefore I tried to change the TABLE CONTROL setting to
4) http://i566.photobucket.com/albums/ss106/wkw510/pic10.jpg
Now, everything is okay but I only get the latest record shows in the TABLE CONTROL. The record I inserted display more than one time, and filled all the table control.
5) http://i566.photobucket.com/albums/ss106/wkw510/pic11.jpg
I am wondering should we include
MOVE-CORRESPONDING wa_tray TO itab_tray.
or
APPEND wa_tray TO itab_tray.
According from Devendra, the PBO should only has this code
loop at itab_tray into wa_tray
    with control tabl_matr
    cursor tabl_matr-current_line.
*    module fill_table_control.   "shoule we exclude this?
endloop.
If I exclude the above code, the table control only show one record, regardless how many records are inserted.
Something is not right here, but just cant find it out.
Please help.

QM Control Chart Limits

I'm having trouble with the X bar and S chart control limits. I am not able to get them to calculate as expected. Also, I'm not clear on what the number parameters (parameter 1, 2, 3, and 4) in the IMG do.
Has anyone out there successfully set-up SPC charting? If so, will you please give me some pointers? We are collecting the mean and standard deviation for each of our test parameters by inspection lot. The number inspected varies per inspection lot.
Thanks,
Bob

Hi Shailendra,
After I change the SPC criteria to "070 MIC/Material" in insp. plan, the control chart shows multiple insp. lot result successfully.
But the system auto collect all the corresponding MIC/Material in one item (ex. 19th). Is there any way to separate the result by every month?
Thanks.

No tolerance limits maintained in controlling area 5555, profile 000001

Hi,
While Doing internal order budget i am getting the below error.Kindly help me in fixing that error.
No tolerance limits maintained in controlling area 5555, profile 000001
Thanks
Kishore

Hi Kishore FICO,
Menu path to maintain tolerance limit for internal order:
SPRO > Controlling > Internal Orders > Budgeting and Availability Control > Define Tolerance Limit for Availability Control...
regards,
ng chong chuan

Vertical Line is not shown in 11g Report.

Hi All,
I have some vertical lines (as column separators) in my reports( which I call from form through web.show_document),
which are neither shown in screen nor in printing.
But these lines are shown when run report from Report Builder.
Please guide !
Thanks.
Dass.

Hi,
I am not sure about 11g Report, but generally , pl try to delete the line , create new line - check font of the line as well, some times this will solve your issue.
dassdhan wrote:
Hi All,
I have some vertical lines (as column separators) in my reports( which I call from form through web.show_document),
which are neither shown in screen nor in printing.
But these lines are shown when run report from Report Builder.
Please guide !
Thanks.
Dass.

USB device name not shown in VISA control

Dear All,
I'm trying to control a lighting controller unit which used as a configurable power supply for a LED light panel.
The model is TMS Lite TMS-LC-15-4CH-A1.
It is not a popular device i guess so it doesn't have a labview driver like Agilent, GwInSTEK etc.
As usual i install the usb driver and demo software then i'm able to control the device using demo software.
Then i open my labview 2012 and select a VISA open, i created a VISA control and i expect the device ID to be shown for me to select. (Just like what i usually do for most of the agilent devices).
However this time it does not shown.
I'm stuck and i really hope someone can help.
Thanks!!!

Is it possible that the demo software you got to work isn't releasing the COM port resource? Have you tried rebooting the computer, and then looking in MAX and the VISA control for the COM port? Doing this after running the demo software may prevent it from being found if the demo software doesn't release the resource.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

The control chart in the sampling method does not match the insp. char. Mes

The control chart in the sampling method does not match the insp. char.
Message no. QD240
how solve?????

You need to compare 'requirement for control chart' and 'control indicator of insp. characteristic'.
1. Requirement for control chart
QCC0 > Quality Planning > Basic Data > Sample, SPC > Statistical Process Control > Define Control Chart Type
See detail for your control chart and check 'requirement' in characteristic type screen area.
2. Control indicator of insp. characteristic
QS24
Check 'control indicator' is suitable for requirement.
Regards, Do Wook KIM

Distribution patch not shown in control panel

Hello everybody,
I have following question:
After installing a distribution patch it is not shown in the software applet of control panel either as separate product nor as an update to the existing one, even if the "show updates" checkbox is on.
Is a problem of the patch or general problem of LabWindows/CVI 2010?
Regards,
Marek

Hi,
Some packages don't show their exact version in MAX or in The Windows Control Panel. For example LabVIEW 2010 with the F1 patch (2010F1).
In MAX : Open Max. Look at the software versions.
Some packages show their exact version
One way to view the version :
Please keep in mind the patches are typically released on a per issue basis and the primiary intent is to provide a fix that typically needs immediate attention.
Houssam Kassri
NI Germany

Budget related activity control tolerance limits

Hi,
I am getting some issue with budeget related Activity Control tolerance limits.
I have made a setting like for warning - 100% and for error - 110%.
While processing for PO, at 100 % system works properly as it shows the warning.
But when I am entering the value exceeding 100% i.e. 101%, then system gives an error for that.
It is supposed to give the error at 110% as per the settings done.
Kindly help on this.

Hi,
Did you give, only 'warning' or 'warning and mail to person responsible'. If you have given 'warning and mail to person responsible', make sure you give the person responsible for the relevant WBS Element.
Regards,
Sagar

Control chart tolerance limits lines not shown

Similar Messages

Maybe you are looking for