Control Charts , Can we use in SAP ECC 6

How do we use these in ERP SAP ECC 6.0 with ABAP

Hello Pubudu.
Can you be more specific please?
What exactly are you trying to do?
Jude

Similar Messages

Can we use CATTs in ECC 6?

Hi
Can we use CATTs in ECC 6. i heared that we can't use CATT in ECC 6 and we can use only SECAT.
Please clarify
thanks

Hi,
As CATT (SCAT) has several critical technical limitations, SAP developed
the testtool eCATT (TCode SECATT) and released it to customers.
I should inform you that CATT/SCAT has been phased out
and is not supported anymore by SAP.
Regards,
Aidan

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

Is ABAP expression FORM - PERFORM can be used in SAP BI 7.0 transformation

Hello
Is ABAP expression FORM - PERFORM can be used in SAP BI 7.0 transformations or method odf class is a recommended approach?
Thanks

SAP BI 7.x Transformations use OO ABAP where the logic that you enter into the tranformational routines (Start Routine, Characteristic Routines and End Routine) are inside METHODS. PERFORM and FORM are procedural-based ABAP and cannot be used in METHODS.
CLASS-METHOD and Function Modules are your best bets for processing outside of the transformational routine. As for performance, we use both and haven't found any signicant difference between the two (our custom Function Modules usually perform only slight better than our custom METHODS).

For GRC 5.3 can I use the SAP GRC 5.2 rule set

We are going for an upgrade to GRC 5.3, I have a small concern here....
Can I use the same ruleset what I used in GRC 5.2 to SAP GRC5.3 ...?
because when I checked ruleset at permission level in GRC 5.2 it displays first object of an action from one function conflicting with first object of an action from another function, where as in GRC 5.3 it displays all objects of an action from one function vs all objects of an action from another function....
How will it impact analysis in GRC 5.3 with old rule set...?
appreciate your response & thanks in advance.

Hi,
Here you will find the documentation to get Upgrade/Configuration Guides.
[https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718172&]
SAP BusinessObjects Governance --> Access Control ---> SAP GRC Access Control 5.3
There you will find a Upgrade guideline.
Cheers,
Martin

Can I retrofit from SAP ECC to SAP R/3

My understanding was yes. However how do I set this up in SMSY? My system is coming in as an R/3 Enterprise system. However when I select the system role for post processing only my SAP ECC systems show up in the drop-down.
How do I include my SAP R/3 system:clients in the SAP ECC drop down?

Hmmm, it can be done both the ways. What system you need to keep it eventually?.
Form your point, Your ECC system is defined right?.
If thats that case, goto Txn SMSY-><your SID>-> Header Data-> Installed prodiuct version->from the free selections select SAP R/3->and the related compoent-(I Guess ECC server). This actually creates by itself an duplicate in R/3. but you have to un-check the leading product role box. (You can have the desired system- by cleaning up the inconsistencies).
The vice versa in the other case.
Does this sound OK. I know, its bit confusing all over, Please try it for a test/Sandbox SID first, to get that on place.
Thanks,
Jagan

Can i use the SAP standard package for lock object creation ?

Dear Guru ,
I want to create a new lock ojbect for my abap program .
When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package .
But i saw the help from SAP said :
>* Package begins with A-S or U-X:
>These packages are for SAP standard objects. Customer objects cannot be created in them. Changes to objects of these packages are recorded by the Transport Organizer (Request management) and can be transported (see field transport layer.
In this case , Can i use one of the SAP standard package for this creation ? Does it will affect the SAP system ( such as the system upgrade ) ?
Thanks .
Best Regards,
Carlos Zhang
Moderator message - Please do not use code tags to format text - it should only be used for code
Edited by: Rob Burbank on May 25, 2010 11:12 AM

Hi Carlos...
First , You will never be able to use any standard SAP Package for your custom programs. So don't go for it.
So in your case what you need to do is , when you save your Lock object ,
- if you want Transport request to be created , then
in the screen shown you need to enter the Z package name (the same package as that of your ABAP Program)
or
-if you want it to be stored as local object , then
specify package as $tmp
Regards,
Uma

ACL Use in SAP ECC

Hi Experts,
We are planning to use ACL in ECC (not in Easy DMS). I have activate the ACL and relevant authorization tab also appears for the DIRs.
But one issue, we are facing in all DIRs. ACL is not getting activated by defaukt for DIRs. We need to click on Authorization tab to activate ACL.
Am I missing any configuation? Can ACL be activated automatically without click on Authorizaton tab?
Please guide.
Thanks
Amit

Hi Amit,
no, the behavior is correct. In the standard there should not be an initial ACL entry from the beginning because several customers complained about it. The problem is that such an iniital ACL Admin entry would be created for the creating userID and so all other users were no longer able to handle this document info record.
So we decided that ACL entries have to be created only if the user navigates to the authorization tab and creates the initial Admin authorization.
Best regards,
Christoph

Can I really Install SAP ECC 6.0 SR3

Hello Experts,
I have a question, I am an amateur and need your expert advice regarding installation of SAP R3 on my laptop. My question is that If I install SAP on my laptop would I be able to practice it anywhere even without the Internet? I am new in SAP FICO and willing to give all my time to learn it. I have 12 points in my account(not a lot I know, but that's all I have), I'll give all these points to someone who can take this time out and explain me how do I do this.
I have Windows 7
Ram 4 GB
HDD 320 GB
Apart from the points, I would really appreciate your help on this.
Peace,
Nick

Well don't worry you don't have to sacrifice your pionts
Hope you are aware that you can download trail versions of various SAP Netweaver releases here [Downloads|http://www.sdn.sap.com/irj/scn/nw-downloads].
Am not really sure how helpful they could be for practicing FICO, as these trail version may not contain most of the standard SAP transactions.
Another option is to install a IDES, which is definitely possible for the configuration you have in your laptop. You may have to look around in your area where you can get it installed . (Should be easy if you are in India).
Vikranth

How to override the onTouchUp in the user control which can be used to fire the event not only on this user control, but whole application

I am a new to the C# and WPF. Right now, I want to override onTouchUp event in my user control. Then I can add user control in
the references for reuse. The problem is each time I want to test this event on the application, the event only fire at area of user control, not whole screen. Anyone has solution for this?

You cannot just add a UserControl to a window and expect its OnTouchUp method to get invoked when a TouchUp event occurs outside of the user control. That is not how routed events work.
The OnTouchUp method of the UserControl will only be invoked when a TouchUp event occurs from within the UserControl.
The event will indeed bubble up to the parent elements of the UserControl and you could for example handle the event in the parent window:
<Window x:Class="WpfApplicationSlider.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525" TouchUp="Window_TouchUp">
The OnTouchUp method of the UserControl will however never get invoked when you touch an element outside of the UserControl because an event only travels between the source element and the handler(s). This is how routed events work.
If you want a "global" TouchUp event handler you should override the OnTouchUp of the top-level
window:
public partial class MainWindow : Window
public MainWindow()
InitializeComponent();
protected override void OnTouchUp(TouchEventArgs e)
base.OnTouchUp(e);
//do your thing...
If you want to be able to reuse the functionality across all of your windows in case you have several you could for example create an abstract window class and make all your windows inherit from this one:
namespace WpfApplication1
public abstract class BaseWindow : System.Windows.Window
protected override void OnTouchUp(System.Windows.Input.TouchEventArgs e)
base.OnTouchUp(e);
//do your thing...
MainWindow:
public partial class MainWindow : BaseWindow
public MainWindow()
InitializeComponent();
<local:BaseWindow x:Class="WpfApplicationSlider.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="clr-namespace:WpfApplication1"
Title="MainWindow" Height="350" Width="525">
</local:BaseWindow>
Hope that helps.
Please remember to mark helpful posts as answer to close your threads and please start a new thread if you have a new question.

SAP ECC Interface w/ IDOC-XML using TCP/IP, HTTP, or FTP to 3rd-Party Syst.

I am trying to understand if the following interface options can occur (without the use of SAP PI or any other middleware):
Option 1A: Can I process an SAP ECC outbound IDoc in XML using TCP/IP to a non-SAP 3rd party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 1B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used TCP/IP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 2A: Can I process an SAP ECC outbound IDOC in XML using HTTP to a non-SAP 3rd-party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 2B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used HTTP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 3A: Can I process an SAP ECC outbound IDOC in XML using FTP to a non-SAP 3rd-party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 3B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used FTP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?

Hello Kirk ,
The answers for your question are:
Option 1A: Yes you can .you can use TCP/IP but you must have a middleware component for that such as BC/JCO .
Please see the link : [http://help.sap.com/saphelp_nw04/helpdata/EN/09/c88442a07b0e53e10000000a155106/frameset.htm]
Option 1B: See the link above.
Option 2A: You can use ABAP code :
[http://help.sap.com/saphelp_nw04/helpdata/EN/e5/4d3514c11411d4ad310000e83539c3/frameset.htm]
Option 2B: [http://help.sap.com/saphelp_nw04/helpdata/EN/90/4f3c2ec3c511d6b2b400508b6b8a93/frameset.htm]
Option 3A: Only with ABAP code :[Reg: FTP Connection;
Option 3B: See the link of Option 3A.
Good Luck,
Boaz
Edited by: Boaz Ornan on Feb 21, 2010 4:33 PM

How do we map this scenario in SAP ECC

Hi Gurus,
I need a help from you, to get your perspective on how the below mentioned business scenario can be mapped in SAP ECC.
Scenario: The client is engaged in a business of supplying surgical kits to hospitals. The surgical kit is actually a case with two shelve in it. Tray 1 holds the equipments for surgery and the Tray 2 holds the implants for surgery. There are various different kits depending upon different surgeries. Depending upon the need/demand from the hospital appropriate kit is sent to the sales rep, who then delivers the kit to hospital. Now when the kit is supplied to the hospital, the surgeon uses the equipments from Tray 1 to perform the surgery and consumes some of the implants (as needed) from Tray 2. Once the surgery is done, the equipments are cleaned by the hospital and the kit is sent back to the sales rep.
At this point the sales rep need to raise an invoice to the hospital for the implants that were consumed from the Tray 2 and also need to charge for the service for using the equipments. Both the equipments and implants have serial numbers and each kit has a serial number.
Ask from the business
1.They should be able to track which kits are out in the field and should be able to see the inventory within the kit.
2.Should be able to consume the implants from inventory, which have been consumed during surgery and raise an invoice to the hospital for consumed implants.
3.Business should be able to charge for the equipments used
4.They should be able to track the inventory in the kits
5.They should be able to depreciate the equipments in the kits.

Hi,
You may please check in this forum
Also, please explore whether [IS-Healthcare|http://help.sap.com/content/documentation/industry/docu_is_health.htm] helps you finding a solution.
Regards,
P Gomatheeswaran

How to copy/send text file from FTPS to SAP ECC File Port

Hi Frdns,
I am working on one design, actually my requirement as follows
I am receiving financial information document from Banks, which is in the form of BIA2 message format, it looks like text file. This information needs to be sending to SAP ECC system.
I identified some approaches to full fill the requirement
1)Using Conversion agent/or third party tools to convert BIA2 message in to XML, then using PI I will pick up the XML message, convert it in to IDoc.
2)Without any conversion I will copy the same file (original BIA2 message) in to SAP ECC file port, in this case no conversion required, calling some program I will schedule it.
I am looking forward t implement the second approach because it saves lot of money to my client.
Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
What is the best approach to copy the BIA message text file from FTPS to SAP ECC File Port.??
Regards,
Raj

Hi Raja,
>>Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
Yes you can do this copy, the only restriction that can happen is the file size.. If you are sure that the fiel will be of few MB at the max then you can use the Configuration part alone and copy it to ECC folder. For doing this you need the following:
1. Sender agreement (mention the sender interface as anything XYZ)
2. Sender communication channel. Pick the file in binary mode
3. Receiver determination (keep both the sender and receiver service as same)
4. Interface Detemiantion (dont specify any mapping and keep the receiver interface name as XYZ)
5. Create receiver agreement (with same service and interface)
6. Use file adapter here
Regards
Suraj

SAP ECC 6.0 IDES connectivity with internal BI server

Hell All,
We have a connectivity issue for SAP BI with ECC. we have a sap ECC6.0 EHP3 instance running in the customer landscape used for training requirement. In the ECC 6.0 we do also have SAP BI server in the same instance. Now customer want to use the same BI server which is in the same SAP ECC 6.0 IDES without installing an additional instance just for training purpose. As a part of the acitivty we do need to know whether we can configure the BI to R/3 data extraction for this instance. ECC have 800 client and BI also works in the same 800 client. Can we configure the SAP ECC to BI source system configuration and do the R/3 to BW data extraction scenarios. also want to know whether we can do the Process chains and other stuff for training requirements.
Hemanth

Hello colluges/friends,
any suggestions on this?
Hemanth

Planning scenarios being used for SAP implementation at Foundry?

Hi,
Please share information on SAP Implementation at Foundry. Which scenario is most suitable? Foundry consists of various depts like Sand division, Core Shop, Melting Shop, Moulding Line, Fettling operation etc. How we can make use of SAP to control overall rejection at Foundry. What is the configuration etc..??

Hi,
u can use discreate manufacturing scenoria for core manufaturing.
My suggestion is as follows,
1.define the finished core as core assembly.
2. since demand of core is decided from the demand of mold, u can define core assembly as bom item of Mold(under Mold BOM header).
3.by doing this, during the MRP, systems gives procurements proposals for core assembly if there is no stock avalibale.
4.so we ccan create seperate production order, and we can confirm yield and rejection qty.
5.after production u can enter the rejection qty while conforing production order.
letme know if u have any futher doubt..
regards
pradeep

Control Charts , Can we use in SAP ECC 6

Similar Messages

Maybe you are looking for