Control / Click and Shift /Click in Captivate

I am currently using Captivate 6.1 (and reviewing 7.0) to develop simulation training. Many applications have a requirement to hold down the control or shift key while clicking a click box. Can anyone tell me if this has been sorted in 7.0 or if there is any way to handle this? I have tried using Flash animations but this too provides layering challenges when the interaction after the shift or control click is in the same area as the shift or control click (which is normally the case).

You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

Similar Messages

How do I create buttons that once clicked and un clicked, alter an image? ...

How do I create buttons that once clicked and un clicked, alter an image?
So for example if I imported a psd file into Muse with 5 layers, could i create 5 buttons which, when clicked, each individually took off and added 1 layer?
Basically this should make what i'm trying to say clear (when it's loaded click the arrow and you'll see): http://lust.nl/lustArchive/noordzee/noordzee.html
Appreciate any help

Hi Joe,
Please use this option to hide the target on click - http://prntscr.com/3plqn0
- Abhishek Maurya

Middle click and right click won't work?

Previously i used nightly but i uninstalled it due to it's unstable. When installing firefox, everything is ok. But i realize my middle click and right click won't work. I have check the "About:config" page and the "browser.tabs.opentabfor.middleclick" is "true". I try to reinstall it but no effects.
Please help. i can't open new tab or downloading images with this issues.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Mouse click - double click and right click

How can i add a listeners to the mouse right click and double click?

Double click is pretty easy. Just check the number of clicks you recieved as a result of the mouseClicked event of a MouseListener. Like so:
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
//double click
}

Tired of Clicking and Re-clicking links in Safari to get the page to load

I am so TIRED of having to click and re-click links in Safari to get pages to load. Sometimes the page will begin to load, but will "hang" and I'm forced to refresh (or hit return, or re-click the link, etc.) in order for the page to load properly.
Can anyone help?

I have been going through this as well - and the losing connection issue.
After uploading the new airport update, Apple help had me do some resets (the power manager and the PRam I believe) and it seems to be working well.
On the other hand, it has worked well at times before and then fell out of wellness... I hope this does the trick.
It is crazy to be dealing with these issues on a macbook.
I HOPE it's not that on the Core 2, the fact that the N is hacked off unless you pay 1.99 isn't making this buggy. That would be a very bad thing on Apple's part.
Just give us full use of the card on the machine from the get go. Not a partly working version. To me, that's suspect in this issue.
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)

Mouse is very laggy while using trackpad, but click and right click are not

This problem started yesterday. While using the trackpad, the mouse became very laggy. I stopped to see if a few minutes would help fix the problem, but the mouse kept moving sporadically. I can click and right click fine and with no lag, but the mouse is either non responsive or extremely laggy. The problem was infrequent at first, but now it is almost constantly there. I'm using a MacBook Pro with Mac OSX version 10.5.8.

Use the Toshiba application installer to reinstall the Touchpad driver.
To find it search your laptop for Toshiba application installer and run it is will download and install all your drivers.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Finder, Excel crash on control-click and right-click in OS 10.4.5 Tiger

Hi,
The Finder crashes every time I control-click or right-click an icon on the desktop. Also, Excel crashes when I control-click or right-click in the program.
I've trashed the Preferences for the Finder, the mouse and Stuffit Deluxe (v8.0) (the latter was suggested in another forum), but the problem continues. I found another post in comp.sys.mac.misc that suggested the cause is a corrupted global prefs file (USERNAME.GlobalPreferences.plist) and that trashing this file while logged in as a different administrator might fix the problem. I haven't tried this yet.
Has anyone else run into this issue and found a solution?
Thanks!
Dual 2 GHz PowerPC G5 Mac OS X (10.4.5) 1.5 GB DDR2 SDRAM, Mighty Mouse

The usual suspect if you have StuffIt Deluxe is the Stuffit contextual menu item. There are two places for contextual menu items:
"/Library/Contextual Menu Items"
"/Users/yourname/Library/Contextual Menu Items"
Take a look and see what's in these folders. Remove the contextual menu items in the folders, then log out and log back in to restart the Finder. You can add them back one at a time until you find the culprit.
Francine
Francine
Schwieder

Re: Shift + Click, and Apple + Click Stopped Working

Pretty much what it says in the subject line.
I know that this may be an OSX type question, but those over in the OSX forum didn't really have an answer, so, I thought I would try over here.
I don't know what happened to precipitate the issue, I don't know how to fix it, but I can no longer use shift + click to select a number of items in Finder/iPhoto, whatever, or apple + click to select non-continuous items in a list.
Is there a place to reset these key strokes? I have tried restarting, and no dice.
Thanks in advance.
Casey

In response:
Are you using an Apple mouse and keyboard?
It is a MacBook, so I am using the keyboard and mouse integrated into the laptop.
Are both otherwise working?
Yes.
Do you have shift and apple keys twice on your keyboard, and if you do, have you tried both sides?
Yes, and I have tried both sides, and neither work.
Do you have a multibutton mouse, and if so, are you sure you are pressing the left mouse button to do the selection?
No, I do not.
Is Universal Access in Apple menu -> System Preferences turned on for any of its features?
None of the features are turned on.
Is Full keyboard access in Apple menu -> System Preferences -> Keyboard and Mouse turned on?
Yes, I believe so. Though I did not see a check box of "Full Keyboard Access." But, I may be blind.
Are the mouse button assignments different from what you expect them to be on in the same panel as the last question?
No, as expected.
If using a third party mouse and keyboard, did you install their software, and make sure their software is known to work with your operating system version?
No 3rd Party Mouse.
Thanks for the input. Any suggestions? It is really annoying.
Macbook Intel Core 2 Duo Mac OS X (10.4.9)

Shift + Click, and Apple + Click Stopped Working

Pretty much what it says in the title. For some reason, I cannot either shift + Click to select a number of files/photos/whatever, or apple + click to select "non-adjacent icons from a list."
I have no idea what precipitated this, and I have no idea where to reset it. And, I couldn't find an adequate answer from searching discussions (am I blind?).
Suggestions? Thanks in advance.

Hi Casey:
1. Do you have multiple accounts on the MacBook?
2a. If so, does this behaviour occur in all accounts?
2b. If there's only one account, try creating a new standard account, and see whether you can shift+click or command+click to select items.
Basically, if it works in one account and not another, the problem is with the account; if it doesn't work in any account, the problem is with the system. Knowing where the problem is will help finding the solution.
Andrew Penner

Double click and single click Event

Hi
I want to add a Single Clcik event and Double click event both on the same movie clip in as3 , its working but call both the event same time so how to fix it , please help us if u have any solution ..(

did you double click enable your object AND add a doubleclick listener? if so, what's the problem?

How to handle both single click and double click from mouse

hey,
I looked in past threads and didn't get a proper answer for capturing both single and double click from the mouse.
in most applications the single click action does not interfere with the double click action, for example in a text editor, single click sets the cursor in between the text, double click marks a word, triple click marks a sentence, they do not bother each other, they all can happen first the single then the double and then the triple, but what if i have a very distinct action for each of the actions, the e.getClickCount() returns every time the number of clicks and if i use
if(e.getClickCount()==1)
    doSingleClick();
if(e.getClickCount()==2)
    doDoubleClick();it will always do first the single click and then the double click, which works fine with the example i gave, but not with what i want to do, so i was thinking to over come this that i will use another thread to run my tasks if dt has past since the last click and by the last click counts to perform the correct action and go to sleep until the next mouse click notify it, what do you think?
run this to get what i mean...
package blah;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class MouseClickTest {
     static long previousTime = System.currentTimeMillis();
     public static void main(String[] args) {
          JPanel panel = new JPanel();
          JButton component = new JButton("Hit me, please");
          component.addMouseListener(new MouseAdapter(){
               public void mouseClicked(MouseEvent me){
                    if(me.getClickCount()==1)
                         System.out.println("Now I will do single click action");
                    if(me.getClickCount()==2)
                         System.out.println("Now I will do DOUBLE click action");
//                    System.out.println("Click count: " + me.getClickCount());
          panel.add(component);
          Launcher.launch(panel);
package blah;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Launcher {
     public static JFrame launch (Container contents, String title, Color backgroundColor) {
          JFrame frame = new JFrame (title);
          if (backgroundColor != null) {
               frame.setBackground (backgroundColor);
               contents.setBackground (backgroundColor);
          } else {
               frame.setBackground (contents.getBackground());
          frame.getContentPane().add (contents, BorderLayout.CENTER);
          frame.pack();
          frame.addWindowListener (new WindowAdapter() {
               public void windowClosing (WindowEvent e) {
                    System.exit (0);
          frame.setVisible (true);
          return frame;
     public static JFrame launch (Container contents, String title)      {
          return launch (contents, title, null);
     public static JFrame launch (Container contents, Color backgroundColor) {
          return launch (contents, contents.getClass().getName(), backgroundColor);
     public static JFrame launch (Container contents) {
          return launch (contents, contents.getClass().getName());
}

Read my comments and solution in this posting; [http://forums.sun.com/thread.jspa?forumID=57&threadID=705244]
and then choose a better design for your application.

Magic Mouse-Right click and left click reversed?

Hello! Thanks in advance for any info you can provide regarding my problem. My wireless keyboard and magic mouse recently has been disconnecting from Bluetooth. A few days ago they both quit, and after a call to apple tech support, I tried everything, including re-loading my system software(Mac Pro, Snow Leopard 10.6.2) When my keyboard and mouse finally came back up, when I de-selected the right click, the mouse wouldn't click. The cursor moves around, but no click. I have to plug in another mouse and select right click, and then the mouse will click, but the right and left click are reversed.
At one point, when plugging in an old wired mouse, I was able to select whether I wanted to enable the right or left click, and when I selected left click, the mouse quit clicking. I can't seem to get thatoption now with a wired mouse, and that might not even be related.
Can anyone help! I'd like to get my Magic mouse working correctly!
Thanks for all your help!
Mark S.

Hello ms:
Welcome to Apple discussions.
Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

On OS X, middle click and command-click do not open bookmarks in a new tab

On OS X, middle clicking or Cmd-clicking on a link, or on a bookmark on the toolbar, opens that link in a new tab. However, middle clicking or Cmd-clicking on a bookmark in the Bookmarks menu opens the link in the current tab.
In the case of middle clicking, I am using an external mouse. Cmd-click fails to open a new tab from links in the Bookmarks menu both when using an external mouse, as well as when I use my MacBook trackpad.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holidng the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

My keyboard Clicks and Lock click has suddenly disappeared. Help?

I woke up today and my KeyBoard Clicks and Lock sound is GONE on my iphone 5. I checked in setting and everything states it is ON, but the clicks are gone. Help??

try this
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

How to differentiate between Single click and double click event in List

I am facing a problem while using list in awt.
I want to execute some code on single click and other on double click but when double click event occurs it also executes the single click code.
because i have added both actionlistener and itemlistener on the list.
How to sort out this problem.
please help me out.
Thanks buddies.

Hello Meeraj_Kanaparthi
Thanks for helping i m giving u the code i have tried.
Plz help me on this...
Thanks........
import java.awt.*;
import java.awt.event.*;
class CheckList extends Frame implements MouseListener
     List l1;
     int x;
     int y;
     CheckList()
     setSize(500,500);
     setLayout(new FlowLayout());
     l1=new List(10);
     add(l1);
     l1.add("Item 1");l1.add("Item 2");l1.add("Item 3");l1.add("Item 4");l1.add("Item 5");
     x=6;
     y=0;
     l1.addMouseListener(this);
//     l1.addItemListener(this);
     show();
     public void execute(int y)
     if(y==1)
     {System.out.println("3");
          l1.remove(l1.getSelectedIndex());
     if(y==2)
     {System.out.println("4");
          l1.add("item " + x);
          x++;
     public void mousePressed(MouseEvent e)
          System.out.println("Pressed");
     public void mouseReleased(MouseEvent e)
          System.out.println("Released");
     public void mouseEntered(MouseEvent e) {}
     public void mouseExited(MouseEvent e) {}
     public void mouseClicked(MouseEvent e)
     if (e.getClickCount()==1)
          System.out.println("1");
          y=1;
     if (e.getClickCount() == 2)
     {System.out.println("2");
          y=2;
          execute(y);
     public void actionPerformed(ActionEvent ae)
     public void itemStateChanged(ItemEvent it)
     public static void main(String ag[])
     new CheckList();
}

Control / Click and Shift /Click in Captivate

Similar Messages

Maybe you are looking for