Control cost and control quantity in production order cost analysis

Hi,
When I checked the WIP value, I found there are two field, control cost and control quantity, in the cost analysis of production order which has some relationship with WIP calculation. But I do not know where the control cost from and by what the control quantity is controlled. Could anyone who know advise please?
Regards

Anyone who can help please?

Similar Messages

  • Role and steps of fico product order costing

    Dear Sap Gurus,
    I am new to topic of product order costing.  I want to know the role of fico consultant in the given topic from creation to settlements complete steps.
    what  are the modules involved in preparing and who will give which part and what we have to update to that as per fico consultatnt.
    Thanx in advance

    Hi,
    Check this URL: http://www.sapdb.info/sap-certification-material-2/
    and scroll to mySAP ERP Financials, you will find good documentation and examples.

  • Production order cost estimate

    Hello,
    what is prodcution order cost estimate.

    SR,
    Production order cost estimate is the estimate of all the costs likey to be incurred on the completion of the production oreder.
    Following is the way described how tp do this in SAP.
    Creating a Cost Estimate for a Production Order Without Quantity Structure
    Choose Accounting-> Controlling->Cost Object Controlling->Product Cost by Period->Planning->CO Production Order->Create/change plan.
    Enter the order and choose ENTER.
    The dialog box Copy cost estimate appears. The system proposes a costing variant through the planning profile. Choose a costing variant.
    If you want to copy costing items using the reference and simulation costing functions, enter either a base planning object or the material and control parameters for a cost estimate without quantity structure.
    Enter the lot size that you want to use for costing, and choose ENTER.
    The system displays the list screen of the cost estimate without quantity structure.
    Enter the costing items.
    Save the cost estimate.
    If you have entered a costing sheet and (if applicable) an overhead key in the master record of the production order, the system calculates the overhead and assigns it to costing items of item category G. You cannot plan the costs for a production order using a cost estimate without quantity structure if the production order is linked to a run schedule header.
    Hope this helps you.
    Rgds
    Manish

  • Reg :Production order cost  report day wise.

    Dear Expert,
    1.We want a report for a particular Production order cost  day wise.
    The scenario is like this Production order is Released for 100 Qty.
    Today they confirmed only 50 Qty.
    Tomorrow they will confirm 50 qty.
    Now they want to see the cost for today confirmation and tomorrows confirmation.
    Reason being daily the Raw Material cost is changed and they want to track the variance.
    Is there any standard report we can achieve this or do we have go for development
    2. And also i need to know daily how many production orders have been released.
    Thank u in advance.

    A day is not a controlled cost object. You could write a report to look at costs gathered in a day (by reporting date), but I strongly suggest that if you need to analyze costs per day you switch to daily orders.
    You'll find then that all the standard processes work for you.

  • Production order costing issue in MTO with variant configuration

    We have an urgent issue to be resolved in production order costing in MTO scenario.
    We have two level configuration with configuration passed from parent to children. The parent has many configurable materials as child(semi finished BOM items) and BOM items of these child has again different raw materials(3 level BOM with last  level being all raw materials) . The production order for parent  created with reference to sales order.
    While costing production order of parent, total planned  price is displayed as zero as we have maintained price control std price for all configurable materials(parent & child) with zero price being configurable materials.Configurations are correct in production order material and BOM components(configurable materials). BOM item selections, Item quanties are also correct.
    Sales order costing is working fine and rolled-up correctly as per costing settings. We have looked at costing configuration for production order and did not find anything unusual.
    Kindly suggest possible reasons for not showing costing result in production order as per configuration copied from sales order  or any possible configuration or master data likely missing ?
    Thanks in advance.
    Kind Regards
    Ganeshan Kalembeth

    Dear  GANESHAN KALEMB,
                           Kindly open production order in change mode and reschedule order, cost order, check material availability and check capacity availability.
    after doing this in main menu goto  > log > overview > see error list if there is any, let me know, your problem can be solved.
    Thanks
    Muhammad Ashfaq

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Product cost v/s Production Order cost

    Hi all Guru's,
                            Can any one help me in understanding difference between product cost and production order cost in SAP.
    Will give full marks for helpful answer.
    Thanks,
    Abhishek
    Edited by: ABHISHEK AGRAWAL on Jan 29, 2008 9:46 AM

    Dear Abhishek,
    Standard Cost Estimate or Material cost Estimate is nothing
    but the standard cost for the Inhouse Manufactured materials
    (FERT) = Raw Materials Cost + Activity(Operation Cost)
    Cost+Overhead Cost if maintained for the Company code.
    This cost will gets stamped in the material master in Costing2
    view,under Current Planned Price field.
    This cost will be the Planned Cost of the Production order and
    after confirmation of the order the actual cost and the variances
    for the production order can be viewed.
    So the Production order cost is for the order quantity say for
    Eg: for a quantity of 100.
    The cost(variance) will be settled against that production order
    after confirmation and TECO status.
    I hope this will be helping you.
    Regards
    Mangalraj.S

  • Production Order Cost Analysis - Goods Receipt

    I have been assigned to create analysis of production orders.  I need to show the volume variance as well as the cost variance using both the initial planned costs as well as the actual costs when the production order is completed.  All this information is available in COR3 on cost analysis, but I need to allow for display of multiple orders based on plant and date information.
    I have found that the ingredients are in the table RESB with most of the information that I need, I have not had luck in finding what table has the goods receipt information (produced product).  SAP help says that the fields are in KKBCS_OUT, which is a structure that I can't find where populated from.
    I would appreciate any assistance in this endeavor.
    Thanks
    Steven M Engel

    Thanks for the suggestions, but they have not provided me with what I think I need to give a solution to my superiors.
    I will attempt to clarify what I need to do.  We are a manufacturing facility.  We have a BOM that says to make 10 E, I need 3 A, 2 B, 3 C, and 4 D.  Each of the components (A to D) have a set cost at the time the production order is created, this looks to be saved as part of the planned cost in RESB.  Produced product E also has a planned cost at time production order created (as seen by COR3) but that is not stored in RESB.
    At production time we actually use 2.5 A, 2.5 B, 3 C, and 5 D to make the 10 E.  COR3 cost analysis is showing me the cost variance.  This cost variance has two parts, part 1 is because the quantities of the inputs are different.  Part 2 is because between the time the production order was created, and the production order was finished, the costs of A to E may have changed.
    I need to breakout the different components to show management how much of the total cost variance is attributed to each part.  I need a report that management can run (or have run) that will allow them choose by plant, date, end product, etc.  so they can direct what changes need to be made to costing, pricing, and BOMs.
    I hope that I have laid out what I am trying to do in a coherent manner.  Also I am new to the SAP system with less than 1 year using the system.
    Thanks for your time.
    Steven M Engel

  • Hide the cost and margin fields on Sales Orders and Invoices

    Hi all,
    I need to hide the cost and margin fields in Sales Orders and Invoices. We sell our products to our employees sometimes, hence we don't want them to know cost and margin information.
    Can this be done?
    Cheers

    Go to VOV7 & as per the Item category ,de - select the Check Box Determine Cost.
    Else remove the Condition Type VPRS & Margin Condition type from the Pricing Procedure
    Best Regards,
    Ankur

  • MTO & Production Order Cost estimate

    Hello
    We have MTO with Production Order cost estimate for valuating invendtory.But the value of GR is not matching with Production Order cost estmate though strategy is "2"-with which its valuated.The estimate does not have any majaor itemisation except Activity cost-which is unchanged.How do i find the the value with which GR is done.AN order cost estimate no is saved in EBEW.WIll this give me trail of the itemisation with values & how can i get the trail.

    Hi SR,
    - Value GR is not match with the order, here are my basic question
    > Are you using material in the standard price or moving?
    > Are man days estimated is same with the actual GI?
    If there is different than cost estimation would not be the same with the actual GR.
    - Find the the value with which GR is done, I'm not sure about the question here & correct me if I'm wrong.
    If you want to search whether GR is done or not you should check by the Order in module PP
    - How can i get the trail, if you want to get the trail over cost and until sales order in placed, I think it has to be a custom program
    Hope helps

  • Production order costs analysis

    Cost anlysis of my production order looks like this
    http://img116.imageshack.us/my.php?image=troskovimojizo6.jpg
    but it should look like this acoording to bpp and configuration guide for my proces (discrete manufacturing).
    http://img393.imageshack.us/my.php?image=troskovidedalf5.jpg
    I have a problem with lines 3,4,5,6,7 (lines with cost element 62100 and 841...), I don't know why they are shown in my list. If any one know how to solve this problem and remove these expenses pls help.
    Thank you all.
    Uros

    Hi,
    Iam not able to open your link.(this link is blocked by our system admin..) Please write your problem.  what type of expenses is comming to your production order cost analysis report ?
    Regards,
    Naresh.

  • Related to production order costing

    Hello guys,
      Will you guys help me in understanding the following query?
           Suppose i am creating the production order for finished material of qty 20, and for which i require 20 semifinished material which i have mentioned in Bom of finished material.I have maintained the semifinished material cost as 100 Rs in Accounting view of material master.After creating the production order for finished material when i check the cost it shows activities cost and semifinished material cost.
        Now my question is how system calculates the total semifinished material cost which were consumed in production order.As we maintain the price of 1 qty in material master of semifinished material.So from where it takes the formula that to multiply the production order qty, its qty required mentioned in Bom, and its price mainted in material master (As per valuation variant) . Whatever formula we maintain in workcenter, that is for internal activity.
       I hope, you guys have understood the query.

    Hi,
    In the production order, component lists will be exploded based on the BOM. In the BOM, if you maintain header qty as 1 and component qty as 10 EA, if you create a production order for 50, then the component Qty will be calculated as 500 EA. Also you can enter unplanned components in the production order. Then the component cost in the production order will be calculated based on the valuation variant maintained in the costing sheet. Meaning whether it is based on moving average price or standard price or planned price of material maintained in the valuation variant.
    Operation costs will be calculated based on the activity price planned in the cost center, work center formula and activity duration.
    Hope this explains you query
    Thanks,

  • Production Order COst Itemization details : which table stores the data

    Hi gurus ,
    Please help in the followoing scenario
    For any production order : GOTO > Costs>Itemization : it says Planned values are recalculated
      At which table level we would retrieve the Itemization details for any production order(containing Material).
    The requirement is to develope a report to display the Cost Itemization details for any production Order.
    Any help is appreciative or helpful.
    Thanks
    Kylietisha

    Dear,
    Check the table COAS and COEP or use BAPI_COSTESTIMATE_ITEMIZATION or K_ORDER_ITEMIZATION_GET
    Please refer this link,
    production order - table for cost itemization
    Regards,
    R.Brahmankar

  • Standard layout production order cost views

    hello all!
    is there a possibility to store standard layouts for ALVs in production order cost displays? is there a user parameter or another setting?
    i can only save user-layouts even though i have SAP_ALL.
    best regards,
    matthias

    Matthias,
    Check whether you are getting the menu Layout Administration or Management. Only if you have the authorisation you would get this option and here you would be able to set the default layout client level.
    I think your authorisation is restricted to setting Layout at user level, I am not aware of the authorisation object on this...so sorry for not able to help you further.
    Regards,
    Prasobh

  • MacBook Pro 2.3 os 10.6.8 control-C and Control-v don't work

    On MacBook Pro 2.3 OS 10.6.8, control-c and control-v don't work in any app Please help

    If you mean copy and paste, that's Command c and Command v, not control key.

Maybe you are looking for