Control Cycle & JIT outbound calls

Hi,
      Here requirement is that need to archive JIT outoutbound calls and delete control cycle. for this please explain the what are the configuration needed?  Also explain me how to block a control cycle?
Regards
Maria
Edited by: Maria on Feb 11, 2011 8:01 AM

no answer

Similar Messages

  • Archiving Of JIT Outbound call.

    Please share the step wise discription of Archiving Of JIT Outbound call.

    Hi,
    Can you be more specific?
    We have a matching Dialplan and working VoiceRouting in place (normal calls to that number are working), but if we want to add the number to a meeting, the same error message appears.
    We do not use the External Access prefix in the Dialplan, we have configured our external access through a normalization rule.
    Regards,
    Moritz

  • JIT outbound issue

    Hi All,
    We received a request from the business to be able to provide a forecast release and then send some kind of re-order point releases. Now in standard SAP you can either order with re-order point but this without sending a forecast generated by MRP.
    Now we have found in the automotive functionality the "outbound summarized JIT" call which we think will solve our requirement. We have set-up this scenario and are able to generate JIT calls. However when we try to send out the JIT call the output is not transmitted.
    In the messages you find the status on RED and the processing log states as error Summarized JIT call XXXX does not exist.
    This message is twice in the processing log.
    However when you call up the JIT call in transaction PJ02 you can see it.
    Any ideas where this error might come from?
    Regards,
    Peter

    Hi Ben,
    First off all thx for your help on this issue.
    The message created either via PK23 or S2L can be seen in the JITOM transaction.
    If you can provide me with an email I can send you the configuration documentation that we have created.
    The configuration that we have done is in the following areas of the JIT outbound:
    Control profiles
    Define JIT call profile
    Define external procurement strategy for sequenced JIT call
    Call Control
    Define Actions
    Define internal processing status
    Define call control
    Message determination
    Maintained configuration for all steps
    Summarized JIT call
    Define replenishment strategies for external procurement
    Regards,
    Peter

  • Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

    Hi guys,
    I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
    However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
    After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
    Has anyone got this working or can provide some guidance?
    Thanks.

    Hi guys,
    I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
    However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
    After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
    Has anyone got this working or can provide some guidance?
    Thanks.

  • Outbound Call in Cisco Finesse

    Anybody please help what all configuration to be done in Finesse to do the outbound calls.
    I am using Cisco UCCX 10.0, in which i have both the option for Cisco CAD and Finesse. When i run a outbound campaign its coming as an incoming call in Finesse.
    When i answer the call, its showing the error "Unable to communicate with Enterprise Server. Outbound option not available".
    Please help how to enable the outbound controls in Finesse

    This is ineed the case, from RN (somewhat cryptic :-) ):
    Cisco Finesse
    Cisco Finesse is the next generation browser-based agent and supervisor desktop for Unified CCX. Finesse is an alternative to Cisco Agent Desktop, Cisco Supervisor Desktop, and Cisco Desktop Administrator. Finesse is available with Enhanced and Premium license packages and provides typical inbound voice contact center functionality. It supports Unified Communications Manager-based silent monitoring and workflow-based recording with MediaSense and Work Force Optimization (WFO).
    Chris

  • PP Kanban control cycle

    Hi team,
    I was referring the below statement to understand the control cycle.
    The Kanban Control Cycle business object is used to control the flow of information and material between the demand source and the supply source in a pull environment. It controls the material quantities in production. It defines a loop between demand source and the supply source for recurring replenishment.
    In the above statement, it is mentioned that, it is linking the demand source and supply source. In SAP, how we are linking the the demand source and supply source?
    While creating the supply area in PK05, we are providing the storage location. Is this supply source or demand source?
    In SAP, where we are assigning the another source (supply / demand source)?
    Regards
    psk

    Hello Mario,
    Thank you very much for your detailed explanation on storage bin and container.
    1. So, if the storage location is not WM managed, there will not be any storage bin. The storage location itself will act as a storage bin. Am i right?
    You said that, Containers are the physical means in which materials are kept in this process. a container usually equals a KANBAN. Normally there are at least two (but can be more) containers in a control cycle.
    2. We are using pallets to replanish the supply area storage locations (production store which is near to work center). So in this example, the pallets are called as "containers". Am i right?
    Consider the below example:
    3. In control cycle i have maintained the number of kanban as 4. As you said above, i need to maintain 4 containers. But i have only one field to maintain the container. How to maintain 4 containers in one field?
    Thank you.
    psk

  • Sent control cycles via IDOC

    Hi,
    I want to use the following IDOCs to execute the KANBAN process in an external system.
    Inbound SAP: CONF51 (for Kanban status)
    Outbound SAP: PKHD5 (control cycle) + PKHD5 (kanban) information
    How can I trigger that the outbound information is sent once a day?
    Using a job I guess that is checking what happend the last day in table PKPS. I want to put in 2 fields different information from other tables. How can I do that?
    What must be setup to sent out IDOC information from SAP?
    I already setup for testing via WE19 the following and it worked:
    - Partner system with the relevant outbound message types.
    Cheers
    Mathias

    Hi,
    I have the same requirement.Please tell me how to got it done

  • Outbound call failing with cause code 57

    Hi,
    our outbound calls to some numbers getting failed with cause code 57 and in ccsip messages i am getting 403 forbidden.
    i tried to change the payload type to 97 which was 98 but no success.
    the called number is 9-8955900
    the calling number is 8062300
    can any one help me..
    the ccsip messages and ccapi inout debug is..
    509022: *Jan  8 14:23:20.513: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255632752,feature_id:53127
    509023: *Jan  8 14:23:20.513: //678454/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
    509024: *Jan  8 14:23:20.513: //678454/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
       Context=0x4AC5D304
    509025: *Jan  8 14:23:20.517: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Interface=0x48D4E620, Data Bitmask=0x0, Progress Indication=NULL(0),
       Connection Handle=0
    509026: *Jan  8 14:23:20.517: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
    509027: *Jan  8 14:23:20.537: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:02:15 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE,                                                                                         NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Supported: X-cisco-srtp-fallback
    Supported: Geolocation
    Cisco-Guid: 2031538944-0000065536-0000027607-3188500672
    Session-Expires:  1800
    P-Asserted-Identity: "Asif CIPC" <sip:[email protected]>
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=yes;                                                                                        privacy=off
    Contact: <sip:[email protected]:5060;transport=tcp>
    Max-Forwards: 70
    Content-Type: application/sdp
    Content-Length: 240
    v=0
    o=CiscoSystemsCCM-SIP 2524413 1 IN IP4 192.168.12.190
    s=SIP Call
    c=IN IP4 192.168.33.5
    t=0 0
    m=audio 17706 RTP/AVP 18 101
    a=rtpmap:18 G729/8000
    a=ptime:20
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    509028: *Jan  8 14:23:20.553: //-1/7916D3000000/CCAPI/cc_api_display_ie_subfield                                                                                        s:
       cc_api_call_setup_ind_common:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=3064
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509029: *Jan  8 14:23:20.553: /
    ASICO-DAM#/-1/7916D3000000/CCAPI/cc_api_call_setup_ind_common:
       Interface=0x48667600, Call Info(
       Calling Number=3064,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User,                                                                                         Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=T                                                                                        RUE,
       Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS                                                                                        E), Call Id=678455
    509030: *Jan  8 14:23:20.553: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pre                                                                                        sentation=Allowed)
    509031: *Jan  8 14:23:20.553: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pr                                                                                        esentation=Allowed)
    509032: *Jan  8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509033: *Jan  8 14:23:20.553: :cc_get_feature_vsa malloc success
    509034: *Jan  8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509035: *Jan  8 14:23:20.553:  cc_get_feature_vsa count is 13
    509036: *Jan  8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509037: *Jan  8 14:23:20.553: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255634768,feature_id:53128
    509038: *Jan  8 14:23:20.553: //678455/7916D3000000/CCAPI/cc_api_call_setup_ind_                                                                                        common:
       Set Up Event Sent;
       Call Info(Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passe                                                                                        d, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown))
    509039: *Jan  8 14:23:20.557: //678455/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       Event=0x48EE6200
    509040: *Jan  8 14:23:20.557: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
       Try with the demoted called number 8955900
    509041: *Jan  8 14:23:20.561: //678455/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476E35D0
    509042: *Jan  8 14:23:20.561: //678455/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       >>>>CCAPI handed cid 678455 with tag 1 to app "_ManagedAppProcess_Default"
    509043: *Jan  8 14:23:20.561: //678455/7916D3000000/CCAPI/ccCallProceeding:
       Progress Indication=NULL(0)
    509044: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination=, Calling IE Present=TRUE, Mode=0,
       Outgoing Dial-peer=20, Params=0x476E4AE0, Progress Indication=NULL(0)
    509045: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509046: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509047: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination Pattern=.T, Called Number=8955900, Digit Strip=FALSE
    509048: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
       Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pres                                                                                        entation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Redirect Number=, Display Info=Asif CIPC
       Account Number=3064, Final Destination Flag=TRUE,
       Guid=7916D300-0001-0000-0000-6BD7BE0CA8C0, Outgoing Dial-peer=20
    509049: *Jan  8 14:23:20.565: //678455/7916D3000000/CCAPI/cc_api_display_ie_subf                                                                                        ields:
       ccCallSetupRequest:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=8062301
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509050: *Jan  8 14:23:20.569: //678455/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       Interface=0x48667600, Interface Type=3, Destination=, Mode=0x0,
       Call Params(Calling Number=8062301,(Calling Name=Asif CIPC)(TON=Unknown, NPI=                                                                                        Unknown, Screening=User, Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20                                                                                        , Call Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl                                                                                        ication Call Id=)
    509051: *Jan  8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509052: *Jan  8 14:23:20.569: :cc_get_feature_vsa malloc success
    509053: *Jan  8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509054: *Jan  8 14:23:20.569:  cc_get_feature_vsa count is 14
    509055: *Jan  8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509056: *Jan  8 14:23:20.569: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255629840,feature_id:53129
    509057: *Jan  8 14:23:20.569: //678456/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
    509058: *Jan  8 14:23:20.573: //678456/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476E4A90
    509059: *Jan  8 14:23:20.573: //678455/7916D3000000/CCAPI/ccSaveDialpeerTag:
       Outgoing Dial-peer=20
    509060: *Jan  8 14:23:20.577: //678456/7916D3000000/CCAPI/cc_api_call_proceeding                                                                                        :
       Interface=0x48667600, Progress Indication=NULL(0)
    509061: *Jan  8 14:23:20.585: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=ye                                                                                        s;privacy=off
    From: "Asif CIPC" <sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2031538944-0000065536-0000027607-3188500672
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF                                                                                        Y, INFO, REGISTER
    CSeq: 101 INVITE
    Timestamp: 1389191000
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Max-Forwards: 69
    Session-Expires:  1800
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 274
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 5380 1731 IN IP4 172..XX.XX.XX
    s=SIP Call
    c=IN IP4 172..XX.XX.XX
    t=0 0
    m=audio 19502 RTP/AVP 18 101
    c=IN IP4 172..XX.XX.XX
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=yes
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:20
    509062: *Jan  8 14:23:20.589: //678455/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 100 Trying
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow-Events: kpml, telephone-event
    Server: Cisco-SIPGateway/IOS-12.x
    Content-Length: 0
    509063: *Jan  8 14:23:20.605: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    Call-ID: [email protected]
    From: "Asif CIPC"<sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>
    CSeq: 101 INVITE
    Content-Length: 0
    509064: *Jan  8 14:23:20.677: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 403 Forbidden
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    Record-Route: <sip:10.205.20.50:5060;transport=udp;lr>
    Call-ID: [email protected]
    From: "Asif CIPC"<sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>;tag=sbc0804k7h28358
    CSeq: 101 INVITE
    Reason: Q.850;cause=57;text="bearer capability not authorized"
    Warning: 399 - "SoftX3000 R601-CCU Rel POS:[3103] Release from CR"
    Content-Length: 0
    509065: *Jan  8 14:23:20.677: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        ed:
       Cause Value=57, Interface=0x48667600, Call Id=678456
    509066: *Jan  8 14:23:20.677: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        ed:
       Call Entry(Responsed=TRUE, Cause Value=57, Retry Count=0)
    509067: *Jan  8 14:23:20.681: //678455/7916D3000000/CCAPI/ccCallReleaseResources                                                                                        :
       release reserved xcoding resource.
    509068: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallSetAAA_Accountin                                                                                        g:
       Accounting=0, Call Id=678456
    509069: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C                                                                                        ause=57)
    509070: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
    509071: *Jan  8 14:23:20.681: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Disposition=0, Interface=0x48667600, Tag=0x0, Call Id=678456,
       Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
    509072: *Jan  8 14:23:20.685: //678456/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509073: *Jan  8 14:23:20.685: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509074: *Jan  8 14:23:20.685: :cc_free_feature_vsa freeing 4AD76408
    509075: *Jan  8 14:23:20.685: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509076: *Jan  8 14:23:20.685:  vsacount in free is 13
    509077: *Jan  8 14:23:20.685: //678455/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C                                                                                        ause=0)
    509078: *Jan  8 14:23:20.689: //678455/7916D3000000/CCAPI/ccCallDisconnect:
       Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
    509079: *Jan  8 14:23:20.693: //678455/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 403 Forbidden
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>;tag=EA475298-106E
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow-Events: kpml, telephone-event
    Server: Cisco-SIPGateway/IOS-12.x
    Reason: Q.850;cause=57
    Content-Length: 0
    509080: *Jan  8 14:23:20.693: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    ACK sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
    From: "Asif CIPC" <sip:[email protected]>;tag=EA475228-24AE
    To: <sip:[email protected]>;tag=sbc0804k7h28358
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: telephone-event
    Content-Length: 0
    509081: *Jan  8 14:23:20.709: //678454/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
       Cause Value=0, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Ca                                                                                        use=0)
    509082: *Jan  8 14:23:20.709: //678454/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
       Cause Value=0, Call Entry(Responsed=TRUE, Cause Value=0)
    509083: *Jan  8 14:23:20.709: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    ACK sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
    From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>;tag=EA475298-106E
    Date: Wed, 08 Jan 2014 14:02:15 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: presence
    Content-Length: 0
    509084: *Jan  8 14:23:20.713: //678455/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Disposition=0, Interface=0x48667600, Tag=0x0, Call Id=678455,
       Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
    509085: *Jan  8 14:23:20.717: //678455/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509086: *Jan  8 14:23:20.717: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509087: *Jan  8 14:23:20.717: :cc_free_feature_vsa freeing 4AD77748
    509088: *Jan  8 14:23:20.717: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509089: *Jan  8 14:23:20.717:  vsacount in free is 12
    509090: *Jan  8 14:23:20.721: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Disposition=0, Interface=0x48D4E620, Tag=0x0, Call Id=678454,
       Call Entry(Disconnect Cause=0, Voice Class Cause Code=0, Retry Count=0)
    509091: *Jan  8 14:23:20.721: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509092: *Jan  8 14:23:20.721: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509093: *Jan  8 14:23:20.721: :cc_free_feature_vsa freeing 4AD76F68
    509094: *Jan  8 14:23:20.721: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509095: *Jan  8 14:23:20.721:  vsacount in free is 11
    509096: *Jan  8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivat                                                                                        e:
       Interface=0x48D4E620, Interface Type=9, Destination=0.0.0.0, Mode=0x0,
       Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screeni                                                                                        ng=Not Screened, Presentation=Allowed),
       Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call                                                                                         Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl                                                                                        ication Call Id=)
    509097: *Jan  8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509098: *Jan  8 14:23:20.725: :cc_get_feature_vsa malloc success
    509099: *Jan  8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509100: *Jan  8 14:23:20.729:  cc_get_feature_vsa count is 12
    509101: *Jan  8 14:23:20.729: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509102: *Jan  8 14:23:20.729: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255632752,feature_id:53130
    509103: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
    509104: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
       Context=0x4AC5D1C4
    509105: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Interface=0x48D4E620, Data Bitmask=0x0, Progress Indication=NULL(0),
       Connection Handle=0
    509106: *Jan  8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
       Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
    509107: *Jan  8 14:23:20.753: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6adee3e42a498
    From: "Asif CIPC" <sip:[email protected]>;tag=2524415~70e9433b-1d79-44ae-9a16-                                                                                        09a52be377c5-22878662
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:02:15 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE,                                                                                         NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Supported: X-cisco-srtp-fallback
    Supported: Geolocation
    Cisco-Guid: 2031538944-0000065536-0000027608-3188500672
    Session-Expires:  1800
    P-Asserted-Identity: "Asif CIPC" <sip:[email protected]>
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=yes;                                                                                        privacy=off
    Contact: <sip:[email protected]:5060;transport=tcp>
    Max-Forwards: 70
    Content-Type: application/sdp
    Content-Length: 240
    v=0
    o=CiscoSystemsCCM-SIP 2524415 1 IN IP4 192.168.12.190
    s=SIP Call
    c=IN IP4 192.168.33.5
    t=0 0
    m=audio 17932 RTP/AVP 18 101
    a=rtpmap:18 G729/8000
    a=ptime:20
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    509108: *Jan  8 14:23:20.769: //-1/7916D3000000/CCAPI/cc_api_display_ie_subfield                                                                                        s:
       cc_api_call_setup_ind_common:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=3064
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509109: *Jan  8 14:23:20.769: //-1/7916D3000000/CCAPI/cc_api_call_setup_ind_comm                                                                                        on:
       Interface=0x48667600, Call Info(
       Calling Number=3064,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User,                                                                                         Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=T                                                                                        RUE,
       Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS                                                                                        E), Call Id=678458
    509110: *Jan  8 14:23:20.769: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pre                                                                                        sentation=Allowed)
    509111: *Jan  8 14:23:20.773: //-1/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pr                                                                                        esentation=Allowed)
    509112: *Jan  8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509113: *Jan  8 14:23:20.773: :cc_get_feature_vsa malloc success
    509114: *Jan  8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509115: *Jan  8 14:23:20.773:  cc_get_feature_vsa count is 13
    509116: *Jan  8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509117: *Jan  8 14:23:20.773: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255634768,feature_id:53131
    509118: *Jan  8 14:23:20.773: //678458/7916D3000000/CCAPI/cc_api_call_setup_ind_                                                                                        common:
       Set Up Event Sent;
       Call Info(Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passe                                                                                        d, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown))
    509119: *Jan  8 14:23:20.773: //678458/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       Event=0x48EE6200
    509120: *Jan  8 14:23:20.777: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
       Try with the demoted called number 8955900
    509121: *Jan  8 14:23:20.777: //678458/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476D5190
    509122: *Jan  8 14:23:20.777: //678458/7916D3000000/CCAPI/cc_process_call_setup_                                                                                        ind:
       >>>>CCAPI handed cid 678458 with tag 1 to app "_ManagedAppProcess_Default"
    509123: *Jan  8 14:23:20.777: //678458/7916D3000000/CCAPI/ccCallProceeding:
       Progress Indication=NULL(0)
    509124: *Jan  8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination=, Calling IE Present=TRUE, Mode=0,
       Outgoing Dial-peer=20, Params=0x476DCE60, Progress Indication=NULL(0)
    509125: *Jan  8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCheckClipClir:
       In: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509126: *Jan  8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCheckClipClir:
       Out: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed,                                                                                         Presentation=Allowed)
    509127: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
       Destination Pattern=.T, Called Number=8955900, Digit Strip=FALSE
    509128: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
       Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pres                                                                                        entation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown),
       Redirect Number=, Display Info=Asif CIPC
       Account Number=3064, Final Destination Flag=TRUE,
       Guid=7916D300-0001-0000-0000-6BD8BE0CA8C0, Outgoing Dial-peer=20
    509129: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/cc_api_display_ie_subf                                                                                        ields:
       ccCallSetupRequest:
       cisco-username=3064
       ----- ccCallInfo IE subfields -----
       cisco-ani=8062301
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=8955900
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    509130: *Jan  8 14:23:20.785: //678458/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       Interface=0x48667600, Interface Type=3, Destination=, Mode=0x0,
       Call Params(Calling Number=8062301,(Calling Name=Asif CIPC)(TON=Unknown, NPI=                                                                                        Unknown, Screening=User, Passed, Presentation=Allowed),
       Called Number=8955900(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
       Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20                                                                                        , Call Count On=FALSE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl                                                                                        ication Call Id=)
    509131: *Jan  8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509132: *Jan  8 14:23:20.785: :cc_get_feature_vsa malloc success
    509133: *Jan  8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509134: *Jan  8 14:23:20.785:  cc_get_feature_vsa count is 14
    509135: *Jan  8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    509136: *Jan  8 14:23:20.785: :FEATURE_VSA attributes are: feature_name:0,featur                                                                                        e_time:1255629840,feature_id:53132
    509137: *Jan  8 14:23:20.789: //678459/7916D3000000/CCAPI/ccIFCallSetupRequestPr                                                                                        ivate:
       SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
    509138: *Jan  8 14:23:20.789: //678459/7916D3000000/CCAPI/ccCallSetContext:
       Context=0x476DCE10
    509139: *Jan  8 14:23:20.789: //678458/7916D3000000/CCAPI/ccSaveDialpeerTag:
       Outgoing Dial-peer=20
    509140: *Jan  8 14:23:20.793: //678459/7916D3000000/CCAPI/cc_api_call_proceeding                                                                                        :
       Interface=0x48667600, Progress Indication=NULL(0)
    509141: *Jan  8 14:23:20.801: //678459/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CE197B
    Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=ye                                                                                        s;privacy=off
    From: "Asif CIPC" <sip:[email protected]>;tag=EA475304-26C5
    To: <sip:[email protected]>
    Date: Wed, 08 Jan 2014 14:23:20 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2031538944-0000065536-0000027608-3188500672
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF                                                                                        Y, INFO, REGISTER
    CSeq: 101 INVITE
    Timestamp: 1389191000
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Max-Forwards: 69
    Session-Expires:  1800
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 274
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 9218 9584 IN IP4 172..XX.XX.XX
    s=SIP Call
    c=IN IP4 172..XX.XX.XX
    t=0 0
    m=audio 16868 RTP/AVP 18 101
    c=IN IP4 172..XX.XX.XX
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=yes
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:20
    509142: *Jan  8 14:23:20.805: //678458/7916D3000000/SIP/Msg/ccsipDisplayMsg:
    Sent:
    509163: *Jan  8 14:23:20.945: //678458/7916D3000000/CCAPI/cc_api_call_disconnect                                                                                        _done:
       Call Disconnect Event Sent
    509164: *Jan  8 14:23:20.945: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509165: *Jan  8 14:23:20.945: :cc_free_feature_vsa freeing 4AD77748
    509166: *Jan  8 14:23:20.945: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    509167: *Jan  8 14:23:20.945:  vsacount in free is 12
    509168: *Jan  8 14:23:32.517: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    OPTIONS sip:172..XX.XX.XX:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKhs8ak5845ch42p7cff35k1ap3T02677
    Call-ID: isbchh12748fcsk155w58p151kks36fww24s@SoftX3000
    From: <sip:172..XX.XX.XX:5060>;tag=sbc0806pa8fp7w7
    To: <sip:172..XX.XX.XX>
    CSeq: 1 OPTIONS
    Max-Forwards: 70
    Content-Length: 0
    509169: *Jan  8 14:23:32.525: //678460/495AB05FB187/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 200 OK
    Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKhs8ak5845ch42p7cff35k1ap3T02677
    From: <sip:172..XX.XX.XX:5060>;tag=sbc0806pa8fp7w7
    To: <sip:172..XX.XX.XX>;tag=EA4780CC-582
    Date: Wed, 08 Jan 2014 14:23:32 GMT
    Call-ID: isbchh12748fcsk155w58p151kks36fww24s@SoftX3000
    Server: Cisco-SIPGateway/IOS-12.x
    CSeq: 1 OPTIONS
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF                                                                                        Y, INFO, REGISTER
    Allow-Events: telephone-event
    Accept: application/sdp
    Supported: timer,resource-priority,replaces,sdp-anat
    Content-Type: application/sdp
    Content-Length: 170
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 8937 2437 IN IP4 172..XX.XX.XX
    s=SIP Call
    c=IN IP4 192.168.33.5
    t=0 0
    m=audio 0 RTP/AVP 18 0 8 9 4 2 15 3
    c=IN IP4 192.168.33.5
    u all
    and the config is
    voice service voip
    ip address trusted list
      ipv4 172.XX.XX.XX 255.255.255.255
    dtmf-interworking rtp-nte
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service h450.2
    no supplementary-service h450.3
    no supplementary-service h225-notify cid-update
    redirect ip2ip
    h323
      session transport udp
      h245 tunnel disable
    sip
      session transport tcp
      rel1xx disable
      registrar server expires max 3600 min 3500
      transport switch udp tcp
      redirect contact order best-match
      asymmetric payload full
      g729 annexb-all
    voice class codec 1
    codec preference 1 g711alaw
    codec preference 2 g711ulaw
    codec preference 3 g729r8
    codec preference 4 g729br8
    and the dial-peer through the calls will go out is
    dial-peer voice 20 voip
    description ***TO-OUT***
    translation-profile outgoing OUT-SIP
    destination-pattern .T
    progress_ind progress enable 8
    rtp payload-type cisco-codec-fax-ack 112
    rtp payload-type nte 97
    session protocol sipv2
    session target ipv4:10.205.20.50:5060
    session transport udp
    voice-class codec 1
    voice-class sip bind control source-interface FastEthernet0/0
    voice-class sip bind media source-interface FastEthernet0/0
    dtmf-relay rtp-nte
    no vad

    Hi Nadeem,
    our setup is like
                                                                vpn link
    call manager ------head office(router)----------------------------------brach router(gateway)------------------ip phone(branch)
    The call flow is
                                                                                                                  sip
    IP Phone---->brach GW-------------->call manager------------------>branch GW------------------->ITSP
    there is no subscriber at branch side, so the outbound call should travel to call manager at head office and then get exit from branch gateway to ITSP through sip line.

  • BAPI /FM to create /change KANBAN control cycle

    Hi
    Is there any BAPI or FM to create or Change control cycle?
    Thanks.

    Check
    BAPI - BAPI_KANBANCC_ADDEVENTDRKANBAN
    Short Text
        Create Event-Driven KANBAN for Control Cycle
    Functionality
        With this method you can procure a material quantity for a control cycle. To procure this material quantity one or more kanbans are created in the control cycle and set to status EMPTY.
        The essential entry parameters are:
        o   Control cycle (if the function module is called as a method for the object kanban control cycle, this parameter is not available, but given by the object.
        o   Material quantity
        Information about the status change is issued.
        COMMIT and ROLLBACK WORK: the function module does not carry out any COMMIT work. Command off. This must be ensured by the initiator after ending the function module. Each time the function module is called, a COMMIT WORK must take place. It is not permitted to call this FM several times and to post the result with a COMMIT WORK. If, during the process,
        the FM comes across an error, in some cases the command ROLLBACK WORK wil be carried out. In these cases the kanban is either set to ERROR status, or in the parameter RETURN an error message is given.
    Hope this helps.
    Regards
    Vinayak

  • SUPPLY AREA  & Controlling Cycle

    Hello,
    I am working with PP REM scenario.
    I want to know more about the customizing and master data and Function of following terms.
    1. SUPPLY AREA
    And
    2.  Controlling Cycle
    Maulik

    Dear Maulik,
    Dear Maulik,
    The Master data required for Kanban production control includes
    1.Supply Area:A supply area is an interim storage location on the shop floor which is used to provide material directly to the
    production line or the work center.
    The supply area can be a shelving area, an area marked off on the ground, special boxes and so on. Defining the supply areas
    for a plant is part of the material flow design for KANBAN. The supply area is defined in Customizing and is assigned the following
    objects:
    Plant
    Storage location
    Person responsible
    Goods movements are posted to the storage location assigned to the supply area.
    One storage location can be assigned to several supply areas, however, one supply area cannot be assigned to several storage locations.
    2.Control Cycle: The control cycle defines the relationship between the demand source and the supply source.
    The control cycle contains the following control data for KANBAN production:
    ●     Kanban circulation, that is, the number of kanbans and the quantity per kanban or per call item as well as the number of load carriers
    ●     The basic data required for automatic kanban calculation, if necessary
    ●     Replenishment strategy
    ●     Printing kanbans, if necessary
    ●     The delivery address, if necessary
    3.Replenishment Stragegy: The replenishment strategies define in the control cycle how replenishment is to take place:
    Using in-house production
    Using external procurement
    Using stock transfer
    The replenishment strategies also determine whether and which replenishment elements (run schedule quantities, production orders, and so on) are created by the kanban signal.
    The replenishment strategy is assigned to the material in the control cycle.
    1.You can create the supply area by executing PK05
    2.Control cyce can be created using PK01.
    Regards
    S Mangalraj

  • Outbound Calls stop working when Lync Edge server is offline

    All,
    We have had an issue inside our environment after one of our virtual hosts died and took out our sole Edge server, basically users could not dial out and were getting the error "Network is busy" on the client. Internal dialling worked perfectly to our Lync
    users but the users could not dial out via our Cisco CME server.
    Our configuration is a Lync Enterprise Pool with 2 servers, DB cluster and a single Lync edge server, the mediation servers are installed on our enterprise pool servers as a single server and the CME is looking at the mediation servers directly and has nothing
    pointing at the edge server.
    This issue affected internal users (as the external users were all kicked out due to the server being down), the strange thing was that you got errors in snooper about the server being unavailable when you dialled out, no idea why it did this. Even stranger
    was that the call itself was sent to the CME as a debug SIP showed traffic being attempted between the user and the number which confused me even more as my mobile actually rang for a single ring as well.
    Has anybody got any ideas as to why the Edge server would do this to internal users?
    Thanks
    James

    Lync checks the bandwith policy against the Edge server. As the Edge is not responding Lync is unable to check the policy and the call fails.
    For the time being you may want to remove the Edge from the topology, then Lync checks against the Front End server.
    I hope you do understand, that this is not a great solution, but a drastic workaround suggestion to a hidden product defect! In hidden product defect I mean Microsoft Lync document team is cynically silent and trying to cover the tracks of this product defect.
    What I would consider as a straight and honest retroactive action for the Lync document team, to add a big warning section to a) single server edge deployment page + b) the Call Admission Control caveats page on Technet:
    "Warning: PRODUCT DEFECT / PRODUCT LIMITATION comes here
    If you associate an edge server or pool to a FE pool, and enable Call Admission Control, your single / pool edge will become SINGLE POINT OF FAILURE for your entire enterprise telephony when doing outbound call attempts!
    So if outbound calls is important in your company (hell, of course it is!) then deploy at least 2x Edge servers in the same pool before enable CAC!"
    But I think that warning message is way too much to ask for, thatswhy is this 2,5 years old topic still open.

  • User Exit for PKMC (Kanban Control Cycle)

    Dear Gurus,
    I need to know if there is a user exit in PKMC (kanban control Cycle) to create a extra tab next to the print control tab in the bottom.
    Best Regards,
    Kumar

    List of exits available.
    Enhancement/ Business Add-in            Description
    Enhancement
    MPKR0001                                Customer fields in kanban control cycle
    MPKP0002                                Customer-Specific Fields Call Interface
    MPKP0001                                Customer Defined Display in Kanban Board
    MPKD0001                                Kanban output as EDI
    MPKCCY02                                Customer Error in SumJC Control Cycle
    MPKCCY01                                User-Defined Fields in Kanban Control Cycle (PKMC)
    MPKC0001                                User exit for kanban calculation
    MPKB0002                                Customer defined display in kanban board
    MPKB0001                                User's own functions in the Kanban processing
    Business Add-in
    BADI_PVBE_UPDATE_APO      PVB Publish Changes to the APO
    MPKC_REQ_SELECTION           BAdI for Requirements Selection for Kanban Calculation
    PK_CALL_INTERFACE              Customer-Specific Fields Call Interface
    PK_CCY_SELECTION               Selection for Maintaining Control Cycles
    PK_REVERSAL                          BAdI during reversal of Kanban

  • Issue in creation of control cycle

    Dear Gurus,
    During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
    I compared control cycle in a different ECC system where source information is appearing.
    How can make the screen appear in my ECC system.
    Please find the screenshots.
    Any pointers will be highly appreciated.
    This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
    Hope that I will get any pointer in EWM forum.
    http://scn.sap.com/thread/3609441
    http://scn.sap.com/thread/3610822
    With Regards,
    Malay

    Hello Malay,
    Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
    If it is a some custom development, your ABAPer can help you on the logic behind it.
    Else, Let us know.
    Regards,
    Sathish

  • Issue during creation of control cycle

    Dear Gurus,
    During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
    I compared control cycle in a different ECC system where source information is appearing.
    How can make the screen appear in my ECC system.
    Please find the screenshot.
    Any pointers will be highly appreciated.
    This thread is further to the thread in Production Planning Forum
    http://scn.sap.com/thread/3609441
    With Regards,
    Malay

    Manish,
    I do not understand how this going to solve the issue because why we need both KANBAN and WM control cycles for one material withdrawal for production?
    Br
    KK

  • KANBAN control cycle pk01 error

    Hi friends,
    I am using SAP 5.0 and material is WM activated, getting error while creating control cycle in PK01.
    Error -: Storage bin 002 / / does not exist {Message no. PK033}
    Note-:it can be solved with PKMC but in SAP 5.0 Pkmc T-code is not available.
    Regards
    Amit

    Hi,
    Check in the material master for the material, whether you have maintained any fixed bin in WM2 for the storage type 150.
    Thanks,
    JK

Maybe you are looking for

  • Satellite A500 - Upgrading from Vista to Windows 7 error

    I'm trying to upgrade my Vista Home Premium to Windows 7 Home Premium via the Toshiba Upgrade Assistance so it will automatically download some Toshiba's utilites and software. At the start of launching it, an error message "This model does not suppo

  • Oracle Application Server 4.0.8.2 upgrade JDBC driver how ?

    What I did was I replace the following classes12.zip (thid JDBC driver is from Jdeveloper library folder) file into OAS home directory under jdbc/lib and change the following env variables in OAS. Lastly, tested out 2 simple servlet program 1) No Con

  • How to create a complete delivery

    Hi Gurus, I want to create a delivery with the full qty as sales order. Please advice Partha

  • Where is the TV series of the week?

    I am looking for the TV Series of the week, which I assume is 'The Revolution will be Televised' as mentioned in the iTunes Editor's Notes shown, for some obscure reason, under movie of the week, Babel.   Does anyone know where to find the download?

  • Urgent regarding radio buttons

    hi friends i created radio buttons with the if else i am checking the output is coming wight..but can we ktake case statement..? if so after case what i have to wright..? .ParameterS:a1 type c radiobutton group radi . ParameterS:a2 type c radiobutton