Control cycle mass creation with staging indicator 4

Hi All,
Is there any way to create control cycles in mass for staging indicator other than 3 - rel order parts?

You can define a generic control cycle for manual staging parts and it will be valid for parts w/o control cycle. Please read SAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841494afa11d182b90000e829fbfe/frameset.htm
For manual staging, you can define one control cycle per production supply area for all materials. This control cycle is then valid for all the materials in the production supply area, for which you have not defined an individual control cycle.
If you want other mass cration / change tool, you have to develop it on your own.
Edited by: Csaba Szommer on Dec 13, 2011 9:59 PM

Similar Messages

Manual Staging in control cycle TR creation WM/PP integration

Hi,
We defined Material Staging Indicator as 4 in Control Cycle
How do we trigger TR for this materials ly??? Do we need to create TR manually? OR any transaction which will allow to create TR automatically for desired quantities
When i go to Change production Order and WM pick list Requested quantiry/confirmed Quantory is Blank only requirement qty column has values
How i can enter quantities manually and trigger TR
Can i have in Prduction Order few materials manually staged and few option 1 [pick parts]

Let me rephrase
We are using Standard PP/WM integration to stage materials from warehouse to production Bins.
We defined Material Staging Indicator as 4 [Manual Staging] in Control Cycle of materials [as business wishes to move materials manually from warehouse to production Bins]
How do we trigger Transfer requests[TR] creation to initiate movement of raw materials from warehouse to Production bins.
Do we need to create TRu2019s manually? If yes How [As I understand TR doesnu2019t allow to move more than one material at a time from one Bin to another]
When i go to Change production Order and select WM pick list I could see Requested quantity and confirmed Quantity column are not getting filled only requirement qty column has values. All columns are grayed.
Can we have few materials manually staged and few via Staging indicator option 1 pick parts? so that all critical parts will be moved manually and others SAP to create TRu2019s automatically
PLEASE HELP

Control cycle for production staging SAP WM

We currently have control cycle for kanban purchase orders. Do I need to create new control cycle production staging. Actually I will be using fixed bin for production consumption. Kindly confirm whether existing control cycle of purchase order can be used.

Material Staging Indicator for Production Supply
The material staging indicator defines the method of how needed materials can be supplied for production with the assistance of the Warehouse Management system.
As with the location coordinates (warehouse number, storage type, and storage bin), the system files this indicator in the control cycle.
The following staging types are supported:
"1": Pick parts
These materials are picked according to the required quantity specified in the production order.
"2": Crate or kanban parts
These materials are always removed from the warehouse in full cases. These can be ordered, for example, as soon as a case of needed parts is emptied in production.
"3": Release order parts
Release order parts are scheduled individually and the quantities are supplied manually to replenishment storage bins based on the requirements of production orders and the stock levels in the scheduled production supply areas.
"4": Manual staging
Materials are staged manually. For example, you can transport individual components using manually created transfer orders, or you can use the bypass method to transport them directly from the goods receipt zone to production. In goods receipt posting, postings are made to the production storage bins from the control cycles.
"0": Not relevant to WM-PP
These materials are not relevant to WM staging. They cannot be requested using the WM system.

Material staging indicator not populating in prod order WM pick list item

Hello,
I have an issue with material staging in an prod order
1) PP-WM interface is activated
2) Control cycle for material is created
3) Production storage location is created for material
4) storage type is 100 for production
5) There is one discontinued material and also the follow up material
6) stock of discontinued material is zero and requirement are passed to follow up material
When we confirm the order the stagging indicator for both follow up material as well as discontinued material automatically populates zero (Non relevence to pick list items) where as it should be one (1 - for pick list items).
One more issue user has manually inserted discontinued material as well as follow up material in production order change mode.
In the BOM of a main material both discontinued as well as follow up material is there with some quantity as a component.
For the same work center, control cycle , production storage location the indicator is populating.
These two material (discontinued as well as follow up) are appearing twice in the WM pick list screen where first two line items are OK and populating indicator "1". But in line item last and second last indicator is not there.
My question is why the stagging indicator is not automatically populating in the production order WM pick list screen in front of components.

Unfortunately, WM material staging via production orders is not possible
from the pull list. Please see the long text of message RMPU 311
(WM material staging for production order reservation not possible):
"You cannot carry out a WM material provision for pick parts from
production order reservations in the pull list". The reasons for this
are cleary explained in the SAP on-line documentation via the
following path :
Logistics -> Logistics Execution -> Warehouse Management Guide ->
Goods Issue -> Goods Issue for Production Supply ->
Material Staging for Repetitive Manufacturing
See the following under the Selection heading :
The choice of the selection type influences which types of WM material
staging are supported in the pull list. However, the pick parts can be
staged via RS headers/planned orders but not with the current BOM
explosion. The release order parts, on the other hand, can also be
staged if the current BOM is used for calculating the dependent
requirements.
WM material staging via production orders is not possible from the pull
list.
I think you may try in CO02 or COR2 for production order or process order.

Control cycle

Gurus,
What is the purpose of control cycle.Is it mandatory,for picking material for Production order.
<<Locked - reason: failed to search before posting question>>
Edited by: Csaba Szommer on Feb 8, 2011 1:30 PM

Control cycle is maintained for WM staging of components for Process or Production orders.
By maintaining control cyccle, you assign a staging indicator for material, plant and Supply area combination which will detrmine how the Material Staging is done for Production Supply (LPK1)

Deletion of KANBAN control cycle

Hi All,
I need to delete a KANBAN control cycle which is the TCODE used for doing so , another problem is that the control cycle is created with the TCODE PK01 and the sypply area is a ware house related one .
Thanks and Regards,
Mallik.

Hi,
Delete the Kanban control cycle with the Transaction: PK02.
Control Cycle --> Delete Entry (Shift+F2)
Best Regards,
Siva

Routing and Control Cycle

hi........
Is there any link or connection between Routing and Control Cycle?...........if there is connection then what are the parameter that are interlinked?.......
thanks in advance
regards
Nilesh

It is correct that there are 2 ways of creating control cycles for materials.
One is thru Kanban way and the other is regular WM way of control cycles.Here for WM control cycles again, it is just the way of driving materials to particular supply area while in kanban, the control cycle is driven with kanban signals.
If you want to define Kanban, you need to identify first what way you would want the replenishment to occur.
There are two options, classic and even driven Kanban replenishment. In the former one, the replenishment is triggered thru kanban signal in kanban board and replenishment quantity is equal to what is mentioned in control cycle.
In a event driven kanban, replenishment is triggered the same way but the quanity of replenishment can differ.
Classic KANBAN:
Quantity of material (target quantity) that is specified for a kanban.
Event-driven KANBAN:
Proposed value for the quantity of material in a kanban that is used by the system when no order quantity is entered at a kanban signal.
AH

Issue in creation of control cycle

Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshots.
Any pointers will be highly appreciated.
This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
Hope that I will get any pointer in EWM forum.
http://scn.sap.com/thread/3609441
http://scn.sap.com/thread/3610822
With Regards,
Malay

Hello Malay,
Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
If it is a some custom development, your ABAPer can help you on the logic behind it.
Else, Let us know.
Regards,
Sathish

Issue during creation of control cycle

Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshot.
Any pointers will be highly appreciated.
This thread is further to the thread in Production Planning Forum
http://scn.sap.com/thread/3609441
With Regards,
Malay

Manish,
I do not understand how this going to solve the issue because why we need both KANBAN and WM control cycles for one material withdrawal for production?
Br
KK

Issue with control cycle

Hello all,
Can somebody please tell me how to find who created a particular control cycle?
Is there a way to find the id of the person who created/modified a control cycle?
If yes, please tell me.
Thanks and Regards,
Umakanth.

Hi
Use Transaction AUT10 with T-codes PK01/PK02.
Give the period for which you want to find changes.
keep the changed by field open , i.e dont put your user id there.
and execute, you will get list of all changes done through creation or chage transaction of control cycle.
check it out and revert back for further discussion.
Hope it helps you.
regards
Ritesh

Handling Unit Management and supply areas with WM/control cycles

Dear all,
has anyone come across the issue how to handle a replenishment process for production with supply area within WM and Handling Unit Management?
Normally a supply area is being staged via control cycles. in the supply area, all storage units get lost (standard functionality as far as I know). When we post the GI, the components will be taken out of the supply area, backflushing is not allowed as far as I know.
Now: what happens if HUM is switched on? Do we have to enter a HU for these GI's as well? Or does the supply area keep the information of the SU/HU? I want to avoid that the users have to tell the system the HU no. for every screw they take/consume...
Thanks & regards
Christian

Hi,
(as already described,)
it is possible to use handling unit management together with lean
warehouse management. You activate handling unit management independent
from storage unit management (that is only possible in case of full-WM
as far as I know).
Only in case if storage location is full-WM- AND HU-managed the storage
unit management is always active and HU numbers are taken over as SU
numbers. In all other cases HUM and SUM are independent from each other
and number ranges must be set a way that they are not overlapping.
Regards,
Ely

Stanging indicator change in control cycle after production order released

HI
We have MM PP interface active
i setup staging indicator 4 for one material via control cycle
Production order is created and released
now we would like to change staging indicator to 1 [pick parts]
how we reread control cycles data in production order
Thanks

Try: CO02 > Functions > Read PP master data

SECATT - Mass creation of users with different assigned roles

Hello! I've been tasked with creating an eCATT to do a mass creation of users and each user will have a different role assigned (besides the general roles). We're doing this to test out the different roles we have created. I've done some searching through the forums and found some different ideas but I'm not sure they are exactly what I need. One suggestion was to use SU10 to make the role assignement but I'm guessing I would still need to setup a parameter for each role so I would initially need to know how many roles would be entered. I would like for the eCATT to be able to handle assigning multiple roles to a user with each user possibly getting a different number of roles. Would anyone be able to suggest a way to assign different roles to different users through an eCATT?
Thank you!

Hi Wendy,
To create users, maybe SU01 or SU10 can be used. To assign users to a role, maybe you can try with PFCG.
SU01 and SU10 have the view from the user - for each user, different roles can be selected and assigned to that user.
PFCG has the view of roles - for each role, different users can be selected and assigned to that role.
Hence if you know which roles should be assigned to which users, PFCG might be easier.
Hope such information is helpful for you.
Kind Regards, Qian

Creation of control cycles for lean WH

Hi All,
Is it possible to create control cycles (backflush) for LWH, if so how?

HI ,
There is one more way to create control cycle.
1. PK05 - create supply area ( earlier explained the procedure)
2. PKMC - enter plant - go to change mode ( click on change icon ) - in the right hand window - you can see the create / copy icon.
3.click on create icon
4.select option - classic Kanban or event driven kanban
5.enter material/ plant/ supply area.
6.enter no of kanban / qty.
7.In replenishment strategy - select appropiate option ( in our case it is stock transfer)
8.enter - the tab will change from replenishment strategy to stock transfer.
9.enter storage location.
10.enter destination- storage type- bin
11.enter if any additional data required to enter.
12. save- control cycle will get generated.
thanks
Om

Quality info record mass creation

Hello Guys,
Can we able to do mass creation of quality info records thru QI06 ? I want to load bunch of QIR as a manual load.
I tried using qi06 in add option but I am getting a warning message that QIR is not changed.
Is that only we can change it ? Pls help.
Akash

Hi
For QI06:
Read follwoing
You can use this program to make mass changes to quality information records. When adding records, you can enter one or several materials. As a rule, the only materials used for processing are those for which QM in Procurement is active in the material master and a vendor release or quality assurance agreement is required by the control key.
You can also select the materials using the material class.
You can enter one or more vendors, for whom a quality information record is to be created.
Using the selection criterion 'Only for purchasing info records', you can create quality information records for all possible material-vendor combinations, provided that purchasing information records already exist for these combinations.
That means first of all you must enter Procurement key in QM view of that Material
Second if you select multiple vendor for a material or maultiple materials with single Vendor.
if you execute this then You will get the list of all possible vendor material combination for which QI can be maintained.
by selecting line you can save them.
The quality info records printed in the list have a traffic light indicator which denotes the following:
Green light: - All data is O.K.
Yellow light: - Ordered quantity is greater than released quantity
        - There is no quality assurance agreement
        - Lock function is active
        - Validity period of QM system has expired
Red light:    - Deletion flag is set
You can select the "Set deletion flag"
function using the menu
Regards
Sujit

Control cycle mass creation with staging indicator 4

Similar Messages

Maybe you are looking for