CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED

dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regards

Dear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj

Similar Messages

  • Control data for storage type  is missing Message no. L3006

    Dear Mates
    i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
    Control data for storage type  is missing
    Message no. L3006
    i have explored every thread regarding the same issue and also implemented some measures like
    -> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
    -> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
    but still i am getting the same message in LT03
    can you please help me out on this.

    Please take a look at the following links and see if they will help at all.
    Error on creating a TO - Control data for storage type  is missing
    "control data for storage type is missing"
    Kind Regards,
    Jason

  • "control data for storage type is missing"

    Hi Guys
    I am trying to create a goods receipt for an inbound delivery.
    I created the inbound delivery VL31N - sucessfully
    But when trying to create a putaway LT0F - error
    control data for storage type is missing. msg no. L3006
    Do i maiantain this control data for storage type in the Material master?
    is there anything Im doing wrong?
    Can someone help please.
    Thanks in advance for the help.
    Ahmad Yahya

    Hi,
    Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
    Regards,
    Prabu

  • Is there table/Report history including timestamp & date for activity type created?

    Hi Guys
    I have an audit request for activity type that should include Date of creation/change and timestamp for them, but I don´t know if there is a table or report
    that I should run.
    Actually in KP26 in section line item shown the dates but by activity type, I expect to run in mass
    I really appreciate if someone have suggestion or idea how is possible to get information with dates and timestamp

    Hi Marco,
    If not in standard, this can be achieved by customized field in the table. This is called Append Structure and you can add Z table.
    Talk to an ABAP person. He can do it.
    I know I have not answered you in a straight way
    Regards,
    Krishnendu.

  • HL Physical Inventory: Control data for storage type  is missing

    Dear experts,
    When performing an ad-hoc HL inventory in EWM, I'm facing following issue after I try to save the countet inventory document:
    This is how my storage type where the inventory will be performed looks like:
    What could be a reason for such a behaviour?
    Thank you in advance
    BR
    Denis

    Hi Denis, you need to have the parent object in the counted item list. That means it is necessary to count the HU with parent object as Storage Bin and then you can count HU content with the parent object as HU.
    When I deleted the parent object I was able to simulate your error:
    Brgds,
    Petr

  • Transfer Order : Data for storage type search is not defined (A   )

    Dear Experts ,
    While trying to use the Transfer Order and trying to determine the storage type this error appears :
    Data for storage type search is not defined (A   )
    Message no. L3007
    Diagnosis
    Information on the storage type search has not been defined.
    How ever , I have already configured the search and here is the Storage Type search's data in OMLY
    1. Warehouse number : W10
    2. Operation : A "Stock Removal"
    3. Indicator :   E
    4. Stock Category : Blank
    5. Special Stock Category : Blank
    6. Storage Location Ref :10
    7. Storage Type : 10E
    Please Advice
    Edited by: Sap Sap on Feb 24, 2011 10:54 AM

    Hello,
    The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
    You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
    SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
    In this go to determine search sequence and then
    for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
    I hope this helps.
    BR,
    Tushar

  • Data for storage type search is not defined (E FC1  ) in WM module

    Hi friends,
    I m working in Ware house management.I have created material document and using the matertial document number in LT06.
    I am getting the following error while creating transfer order for material document in T-code LT06.
    Data for storage type search is not defined (E FC1  )
    Message no. L3007
    Diagnosis
    Information on the storage type search has not been defined.
    Procedure
    Contact your system administrator. Note down the values that are within parentheses in the error message.
    Please advise me how to solve this error.
    Thanks in advance.
    Regards,
    William

    SAP does not know where to put the material.
    You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
    then you setup the storage type search based on this indicators.
    SAP can then know in which storage type it shall search for a space to store your material.
    As a first step check whether you missed to enter this indicator in your matrial master WM view

  • Maintaining of Currency for Activity Type

    Hi,
    Plz let me know the solution for this issue and inpact of this on on other applications.My Controlling Area Currency is EUR but my Co Code Currency is INR and in Cost Center Master Record I maintained the  Currrency for this as INR.
    When entering the price for Activity type which is attached for this Cost Center.
    Tell me know in whcih currency can I maintain the price for this activity type and what is the impact on this ?
    Plz it is very urgent.
    Br,
    Edu

    Since the controlling area currency if EUR, the activity rates will be in EUR. In itemization you can display the cost in INR as well as EUR.
    Regards
    Rakesh Pawaskar

  • HT201317 my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel (version2 ) for activation. its not being activated. i tried many times but failed. i have activated photo stream on my iphone. please guide me

    my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel on computer (icloud version2 ) for activation. its not being activated. i tried many times but failed. when i check the photo stream option and apply its shows that its ok. and after closing when i again open icloud panel the photo stream option remains unchecked that means its not activated. please guide me.

    Had the same problem. I uninstalled icloud, restarted my pc and reinstalled icloud and it's working fine. Hope this helps.

  • Costing for activity types in CS

    Dear All
    Hope you all are doing well.I want to perform costing on service order based on activity type for Customer Services. These activities should be assigned to service material. How can activities assign to service materail? Currently I have configured  valuation catagories , assign cost elements to value catagories, define activity types,Price planning for activity type and assign these activity types to work center.
    Your immedite response is higly appreciable
    Thank you,
    Nomi

    Dear All
    Really sorry for late reply! DIP Profile helps a lot in Configuring Quotation and Billing document. What I did was
    1. I create activities with the help of CO consultant and give price to the activities type.
    2. Setting performed for DISPLAY OF COST in Maintenance and Service       ProcessingBasic settings for these activities.
    3. Assign Cost element for these activities. 
    4. Assign these activities type to the work center.
    5. Define Services Materials for each activity type so that they can be displayed in my quotation and billing document.
    6. Assign services materials to DIP Profile as such:
    u2022     Define planned cost u2013 Total Record as source.
    u2022     In Material Determination for profile I assign each of my service material to Transfer cost and Quantity and assign respective cost and revenue element of that activity type to the Service material.
    When I create a service order with revenue u201CSM02u201D.I do not specify service material. I assign my activities types in operations and when I calculate costing it sums up all the revenue in costing for planned costs but when I create quotation and billing document for the service order it shows individual material for each activity type and its amount on item data and total is displayed in header data against EK01 condition type moreover planned and actual cost are displayed in service order.
    The problem is, I have not create any condition record nor assign these condition type to my pricing procedure as value is arising from activity type.
    Which condition types can be assigned to pricing procedure so that they can pick up the value of the activity type?
    Thank you
    Nomi

  • Change validity end date on activity type

    Is there a way to change the validity end date of an activity typre. Currently it is 9999 we would like to change it to 2011.
    We would like to use a particular activity to cost current standards but dont want to use it for planned estimates that we will create for 2011. I am assuming if the validity ends in 2011 it will resolve the problem. I know we could create alternate routings and different production version but I am trying to avoid that and see if we can find a short cut.
    Your help in this regard will be much appreciated

    Hey Greta,
    I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
    Any ideas as to what is happening!!
    Regards,

  • Idoc INVOIC error Baseline date for payment does not exist

    Dear All,
    I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
    The payment term is correctly maintained in the purchase order.
    Idoc message type INVOIC MM.
    Baseline date for payment does not exist
    Message no. M8356
    Diagnosis
    You have tried to post a document without a baseline date for payment.
    The system will not allow you to do this.
    Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
    If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
    Regards
    Arnaud

    Hello,
    Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
    In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
    I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
    Thanks anyway for your input.
    Keep in touch.
    Regards
    Arnaud

  • Issue loading Meta Data for IDoc Type WPUKSR01 in XI Integration Repository

    Hi,
    I want to load the Meta Data for IDoc Type WPUKSR01 in XI Integration Repository out of BI. Unfortunately, this IDoc is not available in the IDoc List. I checked in BI and the IDoc Type is available in WE60 and WE30. Also, I can load the Meta Data for the Idoc in XI ABAP (IDX2).
    Can someone tell me why the IDoc doesn't show up in XI Integration Repository Import Object List?
    Thanks in advance.
    Best Regards.
    Alex

    Hi Aamir,
    The Idoc is released since Release 30A. I also tried to load the IDoc Meta Data from ERP with the same result: it does not show up in the list.
    Thanks anyway.
    Alex

  • RE: IDOC CONTROL DATA FOR ISU_IDOC_INPUT_ISU_EL40

    HI,
    CAN ANY BODY PLEASE TELL ME CONTROL DATA FOR ISU_IDOC_INPUT_ISU_EL40
    THANKS,
    Sarang

    Hi raj,
    i want to pass data to standard function module which genrates idoc.
    function module name is ISU_IDOC_INPUT_ISU_EL40.
    now i want to pass control data to IDOC_CONTRL parameter.
    my itab consist of 4 fields.
    first field is passed to one segment and remaining fields are passed to other segment.
    So I want to know how to pass data to different segments and what should be the control data(like partner type etc.)
    waiting for ur reply
    Thanks,
    Sarang

  • Customisation for F5 is not maintain in j_1iexcref  table

    Dear Friends,
    In our business process some invoices are not relevant for Excise like F5 or Scrap Sales etc.
    After creation of Invoice we go for Batch Utilization in J1i3
    By this we create 1000 to 1500 excise invoice every day per plant.
    in that day if we created any non excisable invoice like f5 or scrap sales invoices.
    That day it fetch error:- "Customization for F5 is not maintained in J_1IEXCREF table"
    Due to non excisable invoice we are not maintained in "Assign Billing type to Delivery Type"
    How we can solved this issue without going J1IIN individual excise invoices generate.
    Regards
    Arun

    If it is a manufacturing plant, you are suppose to create an excise invoice even if any material is not excisable.  This is from excise point of view.  I am not sure, whether the client is a manufacturer.
    Coming to the requirement, in J1I3, you have the option of selecting "SD Document category".  Here select "M"  and execute, assuming that in F5 you have not made any changes in VOFA.
    thanks
    G. Lakshmipathi

Maybe you are looking for