Control-Delete key combo does not work

I have a two-week old iMac. I have a wireless keyboard and mouse.
I am still learning all the ins and outs.
Everything I read seems to say that using the Apple key + delete will move a selected file to the trash.
It does not! I am a former PC'er and hate having to drag stuff to the trash.
I've tried everything I can think of. Any suggestions?
Much thanks,
Gerry
iMac (Intel duo) Mac OS X (10.4.9)

Hello Gerry and welcome to discussion,
I just tried this on my Mac ( not a big fan of keyboard shortcuts here ! ) at first it did not work for me. Then I tried different speeds of the keystrokes - It works now, for me, if I perform the keystrokes very quickly! Odd? - I don't know.
Is there any way you can try the keystrokes on a different keyboard?
Regards
Ian

Similar Messages

The download of icloud control panel v2.0 does not work. I have no box to check for calendar and contaks. Whats wrong?

The download of icloud control panel v2.0 does not work. I habe no box to check for calendar and contacts. Whats wrong?
Thanks Chris

Hi, I came across the same problem and was not able to open any iCloud folders on Outlook, and iCloud was continusly asking to repair the iCloud Control Panel. Got the issue fixed by following the steps on the link http://somanytips.com/fix-icloud-error-repair-the-icloud-control-panel-to-use-ic loud-with-outlook/

Hello, I purchased design premium 4.0 German Windows (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but onl

Hello, I purchased design premium 4.0 German Windows (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

Moving this discussion to the Downloading, Installing, Setting Up forum.
Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession, You can find details regarding the transfer process at Transfer an Adobe product license.

I purchased design premium 4.0 German Windows from my friend and wanted to installation it. However, the key code does not work.

I purchased design premium 4.0 German Windows from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

Nobody here can help you with this. You'll need to contact Adobe directly.
Did your friend fill out and send in the license transfer form?
Transfer an Adobe product license

CuciLync 9.2 - registry key configuration does not work as expected

Hi,
according to the Administration Guide for CuciLync 9.2.2 some registry keys are supported to configure the client.
In the chapter 'Phone Parameters' there is a statement that four registry keys are supported:
CcmcipServer1
CcmcipServer2
TftpServer1
TftpServer2
In the next chapter 'CTI Load Balancing' there is an explanation that the registry key UseCUCMGroupForCti is also supported.
=> Does that mean that five registry keys are supported and not only four ?
My next questions leads to the possible values for these registry keys.
With CuciLync 8.6 it was possible to leave the registry keys for CcmcipServer empty.
In this case the IP addresses for CcmcipServer were automatically defined by downloading the config file.
And with UseCUCMGroupForCti these IP addresses were 'copied' to CtiServer.
That means with CuciLync 8.6 there was need to define CcmcipServer and CtiServer.
Only the TftpServers were configured by registry keys.
=> Is this also supported with CuciLync 9.2 ?
=> If no: In which future version do you plan to implement this ?
=> If yes: Are there any extra settings needed ? Because it does not work at the moment
Thanks for your feedback
Best Regards
Carsten Lucy
(Bayer Business Services)

According to MSDN:
When caching is enabled, the module caches the service information data until it polls the Service Control
Manager and discovers that the data has changed. If changed, the module updates the cached data and returns it as output. You can disable this caching feature, but doing so will cause the module to return data at every polling interval instead of only returning
when the data has changed or when the polling interval count has reached a multiple of 10.
However, the configuration is DisableCaching, and the default is False. Go figure that one out. Gotta
love Microsoft configuration names and documentation! If true, then it's not disable..... :)
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Pressing play in control center in ios7 does not work

Has anyone else tried to press play in control center to continue listening to itunes and nothing happens? The volume control works but not play..

I'm with you. I went from a Windows HTC phone which worked perfectly to an IPhone 5S and now the message feature on my 2010 Honda Insight does not work. Since I do quite a bit of traveling, this is a little annoying.

ActiveX-Control in C++ LoadFile does not work

I tried to use the ActiveX Control in my C++ Application. But when i try to call "LoadFile", it does not work. Everytime i call it i get a "false" as response, but i don't know why it is not possible to open that file. I tried everything i could imagine. Different Path, different Names, another File....!
I do not have any new idea right now!
Here are a few lines i have wrote so far:
   wxActiveXContainer* m_pAX;
   wxAutomationObject m_PDF;
   IDispatch* pDispatch;
   HRESULT hr = ::CoCreateInstance(CLSID_Pdf, NULL, CLSCTX_INPROC_SERVER, DIID__DPdf, (void**)&pDispatch);
   if (hr != S_OK) {
      return;
   m_PDF.SetDispatchPtr(pDispatch); // wxAutomationObject will release itself
   m_pAX = new wxActiveXContainer(this, DIID__DPdf, pDispatch);
   if (m_PDF.CallMethod(wxT("LoadFile"), "D:\\load.pdf").GetBool()) {
      m_PDF.CallMethod(wxT("setCurrentPage"), wxVariant((long)0));
      wxSizeEvent event;
      m_pAX->OnSize(event);

more than 100 people have read my question and no response ? Is that problem normal? a hardware bug? a software-Update Problem? Anyone here from the Manufacturer of this phone or users only? Is there an email adress of Blackberry Support? I only find such social notworking like Twitter what i can not use because only 140 charakters. Please help

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

HT1338 My key register does not work ,I can't install my Apple's keyboard,my apple's mouse and I can't acsess anything because I can only enter as a guest .Help me , please !

I am the administrator and the key does not work,nor the registry key .

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

E7 lock key switch does not work

Lock key stopped working during some update today. I installed the phone from scratch and installed anna over previous os.
At sometime on the proces lock key stopped working. It does not work neither as led torch switch.
I have found no place to change this key behaviour.

Hey Mann,
In order to reslove your issue I would suggest performing a soft reset (*#7780# soft reset(security code needed; 12345 by default) and then re-install anna again, should this not work you should consider taking your device to your local Nokia Care Point
Thanks,
Whizzkid

Control-Up/Down-Arrow key combination does not work anymore

Hello,
I have a problem that occurred in the last week, not sure if it happens due to 2 security updates that came in via Mac OS X software update. I am unable to assign Control-Up-Arrow or Control-Down-Arrow anywhere in applications! Right and left arrows are working fine.
Examples:
1) in Xcode Preferences, try to assign Control-Up-Arrow to any item in the menu. It doesn't work for me, it's as if I hadn't pressed that key combo. But I am able to assign any other key, Control-Right-Arrow, for example.
2) in Logic Pro 9, I tried the same in the keyboard shortcuts dialog. Control-Left/Right-Arrow are working fine, but Control-Up/Down-arrows cannot be entered.
3) at last, I wrote my own little dummy test Cocoa application in Xcode, and I assigned Control-Up/Down-Arrow to 2 menu items in Interface Builder, and assigned some action. The action did not work when I pressed the shortcut. But it does work with Control-Left/Right-Arrow. Also clicking the menu items with the mouse works, even when configured to control-up/down-arrows.
I checked Universal Access in system settings, and mousekeys is off.
I installed these sw updates last week: Xcode 3.2.4, Security Update 2010-005 + 2010-006. Was anything changed about the key combinations?
Could anyone confirm or deny my findings? It used to work before the sw update. What could have possibly happened to Control-Up/Down-Arrows?
Thanks for any help, it's appreciated!
Message was edited by: Sven Thoennissen
Message was edited by: Sven Thoennissen

It turned out that the Control-Up/Down-Arrow shortcuts were taken by the Spaces app - even though Spaces was disabled! The problem was fixed by enabling Spaces and disabling it again.

Key tab does not work on solaris

Hi,
I have installed my new dev environment , a solaris 10 system.
Unfortunatly, when I launch my production java applications, some control key does not seem to work. Particularly the tab key, so i cannot change from one JTextField to another. But this behaviour does not occur when the same application is launched on windows, linux or freebsd.
Can anyone help me ?

Thanks, alan!
I believe what you found is right! I hard coded the size (60) in vswprintf and It works!
I cannot pass the size ( 60 ) to ksx_swprintf, I need to find a way to compute the bufr size ( not by sizeof(bufr)) inside ksx_swprintf before calling vswprintf.
What I am doing here is to i18n a big system to a few unix platforms. Of course, you know there are many calls of sprintf() in the code base, it is impossible to manually change all the sprintfs. what I did so far is to replace all sprintf by stprintf, then define macro stprintf to be swprintf for WCS and sprintf to be the SBCS, but on solaris 7, unlike other systems, swprintf takes an argument of buffer size ( as the 2nd argument), so for SOLARIS7, I have to define stprintf to be ksxswprintf. This is where I am.
Thanks for pointing out the error!
CXP

I have a Roland A-90 ex midi thru M-Audio prokeys 88 into an iMac and have Logic Pro 9, Sibelius 6 and Miroslav Philharmonik to use. Problem is that in all three applications the midi key OFF does not work on the odd occasion and a note STICKS.

ROLAND A-90ex Midi to M-audio prokeys 88 USB INTO iMac using LOGIC PRO9,SIBELIUS 6 & MIROSLAV PHILHARMONIK. When I play the keys, every now and then the note off command does not seem to work and I'll hit a note and it will stay sustained, stuck as if. I cannot turn it off. Tried everything , preferences and all the usual things. Any ideas?

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Startup key combination does not work

Hi all,
Not quite sure what I have done...
Received my MacBook Pro today...
I installed 10.4.8, installed boot camp 1.1.1, set a partition of 10 GB for windows and in the partition manager of the XP setup I deleted what I thought was a 100 odd MB partition and I installed XP on the 10GB partition boot camp made for me.
Done what I needed to do in XP and tried to boot up in my Mac OSX by holding down the option key on startup. Then I was presented by a screen with a Padlock image and a password box. I typed in the only password I had created for my OSX and that didn't work. So I tried using the install disc 1 by holding down the C key while booting up, it didn't work, it just boots in XP. Also the D key and other start up keys don't seem to work. I have spend all night looking for some post mentioning this but it seems that this is the only case.
Any ideas????
Cheers

Sounds as though you may have deleted your OS X partition from the XP partition manager?
Did you activate File Vault in OS X? I've been using Macs for years and don't encourage people to use File Vault, as so many things become impossible to remedy if anything goes wrong.
Nevertheless, if you insert your Installation Disc 1 and start up while holding down the C key, you should be able to boot from Disc 1. If that can't be done, you will need to call Apple.
If you did manage to boot up from the installation disk, I would suggest that you simply do a total zero erase and start over, with a fresh installation of OS X.

Contribute key/connection does not work

I'm a web designer running Dreamweaver CS3 on Windows XP and
Contribute 3. I recently developed a new site for a client and set
them up with Contribute CS3. The client is unable to connect with
Contribute although they can connect with filezilla. All keys fail
with a couple of different error messages... "Error. It appears
that the data we are trying to read is corrupted. Please make sure
the server space is not full." or something about the password
being incorrect. The server is new and the password is correct. I
was able to create a connection in Contribute manually on site, but
offsite the client has not been able to connect manually.
I searched the forums but haven't found an answer to the
problem. I deleted the _mm folder and the .LCK files and tried
recreating the Contribute site and settings but it didn't work. I
currently administer about a half dozen sites for both in-house
projects and clients who do their own updating. I wondered if it
might be a version issue, but that has never been a problem before.
I've experienced corrupt keys before but have still been able to
connect manually or have had success by deleting the _mm folder and
recreating the Contribute connection.
I'm really stumped. Any ideas out there? I'm going to attach
the ftp error log the client received while trying to connect.
Thanks.

The problem is solved. The client who was trying to connect
was off site. They had to connect manually and adjust some of the
ftp options according to their network setup.

Control-Delete key combo does not work

Similar Messages

Maybe you are looking for