Control detail window from a list window?

Hi,
My customer's request is this:
From a (Easy)POWL list, the user should be able to display the details in another window by selecting a row in the list and clicking a "Detail" button. This detail window is indeed another WD application normally running alone, where the data can be maintained (Maintenance Application).
It should be in another window, because there are a lot of detail data. If it would be displayed in the same window via a detail view, the list would have to shrinked, but indeed, the list is more important.
The requirement is also that when the detail window has been launched, every subsequent row selection of the user (and perhaps clicking a "Detail" button) should be in the same detail window.
So far, I managed to get this detail window up and running, but for every subsequent selection, it spawns an additional window. I embedded the maintenance component in my list component and defined all usages...
I also defined the original context node START with the key and type of transaction mode (Display/Change) now as interface and Input Element (ext.), but now, when the Maintenance Application is started, it dumps with
"The Mapping to Node COMPONENTCONTROLLER.1.START Has Not Been Completed. ". When I uncheck the "Input Element (ext.)" box, it runs ok.
For this I found 3 other SDN threads, but none of them helped me, nor any any Google resource.
Can you help me with the last problem, or to solve the general problem how to "control" the contents in the detail application and window from the list component?
Thanks in advance,
Erlend

Since you are so set on the post-query method, do this:
Do NOT use a post-query. Just create one or more additional items in the same block that are assigned to a separate stacked canvas. Set these items singly-occurring (property Number-of-Items-Displayed = 1). Create a "Details" button in your block on the main canvas that user can click. All its WBP trigger needs to do is:
    Go_Item('Blk.Detail_Item');
I don't think you even need a:
    Show_View('Detail_Canvas');
On the stacked canvas, create a cancel button with a WBP trigger that does a Go_Item('Blk.<main-canvas-item>'). And make sure you cannot use the Tab or Enter key to navigate into the details canvas items (Set the appropriate Next-Navigation-Item properties).
The above method is certainly the easiest. However, if for some odd reason, you don't want to fetch all the details for every record during the initial query, then you can use a different method. This one involves the same stacked canvas and details button. But use a control block and one or more items to display the data. In the WBP trigger, Select detail_columns into :Control_Block.detail_item where rowid = :base_table_block.rowid; and then Go_Item('Control_block.detail_item'); Control_block.detail_item is of course displayed on the stacked canvas.

Similar Messages

  • How to Open a New window from a List region Link, Please help

    I am trying to get a new full window( Not popup window) open from a list region link. The list region entry is an Image. I get the new page open, but it is not in new window, it is in the same window.
    I know I have to give the target = "_blank" somewhere. But In List region, I dont know where to add this.
    Please help
    George

    Yes, you are right Arun. That is more elegant way of
    doing it. Keep it up. thankx..
    Btw, why do you hate javascripts? Can you imagine the
    internet world without javascript (or ant scripting
    language)?yep i agree... but i try my best to avoid scripts.. as i had been workin around some japanese technologies... and there are three major mobile market players there... who has their own content type and all those devices never support javascript..
    more over i donno that... in all 3 yrs i have never used that ;-))

  • I can't uninstall Thunderbird from my Windows Programs "uninstall list"; why does it not uninstall and be removed from this list?

    Very frustrating...under the Windows "Programs/Uninstall a program" list, Mozilla Thunderbird is still listed AFTER I have removed it completely (I thought) from my computer. I have clicked on "uninstall" several times and nothing happens. I resent the fact that Mozilla has set this up so that it apparently can't be removed from that list.. What's that all about? I have tried to research the problem, even using your website to no avail. All I want to do is get it out of my uninstall/change list. I have not used that program AND won't use it. I don't want that program on my computer/list period. I would appreciate your help.

    This is a fault with Windows application management. Mozilla does nothing to interfere with the install/uninstall process.
    You could re-install Thunderbird to re-synch the applications list and then un-install it again, or you could use a utility to remove it from the list.
    A search for ''thunderbird.exe'' will confirm whether or not it has been truly removed, though you may need to disable all the idiot-proofing that Microsoft implement to stop us seeing the true state of the file system; set it to show hidden files and file extensions for starters.
    Thunderbird is pretty much self-contained. You are free to manually remove the folder the application lives in if Windows is unable to uninstall it for you, though that won't fix the incorrect appearance of thunderbird in the list of installed applications.

  • The main develop module controls have disappeared from the develop window.  How do I recover them?

    The main develop module controls have disappeared from the develop window.  How do I recover them?  I'm working with Lightroom 5.3.  The missing controls are the sliders for exposure, contrast, clarity, etc.  I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back.  I've never had this experience in the years I've been using Lightroom (since version 1.1).

    Right-click on any other item Tone Curve for ex., and check on "Basic" if that's what you are missing.
    If you miss the complete Develop module right-click any other item  Library for ex and put a check on Develop

  • Can I control a Windows PC from my Macbook Pro?

    I have a Macbook Pro running Mavericks, and a Windows PC running XP.
    I don't use the Windows machine much, it's just for tasks using older software, etc.  It's not connected to the network in the house because it runs XP which no longer receives security updates from MS.
    What I would love to do is control the XP machine by using Remote Desktop from my Macbook, rather than having a separate keyboard, mouse and monitor connected to the XP machine.
    I've no idea how to go about doing this if the XP machine isn't on the home network.
    Any suggestions?

    You can use ARD to remote control a windows machines, ARD is built on VNC
    You'll have to install a VNC server on the windows machine you want to access
    You won't be able to use most of the ARD features as they are specific to mac
    You'll be be able to see and control the desktop and that's about it
    You can also find VNC /Remote Desktop apps in the iOS store that will allow remote desktop connection from iPad /iPhone,
    There is a mac version of Microsoft remote desktop in the Mac App Store

  • A free way to control a windows PC from a Mac

    Hi all,
    My folks live a few hundred miles away, and I often need to help them with something on their Windows laptop. (Don't worry - their next machine will definitely be a Mac, now that they have played with my iMac!)
    I would like to be able to remotely control their machine from my Mac (similar to how this is achieved where I work using WinVNC)
    Ideally this software would be free, or a few dollars. Again, needs to be able to install on the Mac to control the windows PC. It will never need to operate in the other direction (i.e. they won't need to control my machine!)
    Can anyone help? I would be v grateful for the saved 'over the phone' support, and my parents would definitely appreciate it!!!
    Cheers, Chris

    The PC must be running Windows XP or Vista, and have Remote Assistance turned on. See:
    http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
    In their router (if any), port 3389 will need to be open and forwarded to the PC's internal IP address. See:
    http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTrouble shooting.html

  • When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

    When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

    Hello Cgifford,
    Welcome to National Instruments Forums.
    To output your signal to the PFI lines,
    you can use external connectios between OUT0 and PFI lines. You can also use
    the backplane to do so by routing into the same RTSI line.
    1)
    On the SCOPE and FGEN, the name of the
    terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
    need to route the signal using the property:
    You can also use the DAQmx route signal which perform the same opperation.
    2)
    This will depend on the frequency of
    your pulse train. If this is lower than about 10 ms, then you can probably
    place this on a loop and start and stop the acquisition every time. If the
    frequency is higher than this, you will have to use:
    -       Scripting on the FGEN side (read more)
    -       MultiRecord Fetch (more information in the scope help file
    section “Acquisition Functions Reading versus Fetching”).
    3)
    The short answer is yes. The longer one
    might depend on how tight you need the synchronization to be (us, ns, ps). For
    very tight synchronization, you should look into here.
    Message Edited by Yardov on 06-18-2007 03:14 PM
    Gerardo O.
    RF Systems Engineering
    National Instruments
    Attachments:
    property.JPG ‏7 KB

  • Hi! I would like to remote control my iPad from my Windows PC. Is that possible?

    Hi! I would like to remote control my iPad (my sister has borrowed it and is in another city!) from my Windows PC OR from another iPad I use at home.
    Is that possible?

    TeamViewer allows you to control a PC or Mac from an iPad, not to control an iPad from another device. You can, as I said, push settings, do some reporting, transfer documents, and some other administration functions:
    http://www.teamviewer.com/en/products/mobile-device-support.aspx
    but again, remote control of an iOS device is not possible.
    Regards.

  • Flash audio controls is gone from the Windows audio mixer.

    Flash audio controls is gone from the Windows audio mixer. The sound is, but I can not control it separately from the browser. Previously, there was a separate flash and a separate browser. When I use FF3. *. Flash Player audio option was, but the new FF versions do not. For me it was very comfortable and loved.
    How can I repay such opportunity? and whether there is still a possibility?

    Thank cor-el, but it did not help. I tried everything ( I installed it all over again, several times , clean cookies I'm using [[BetterPrivacy 1.68|BetterPrivacy 1.68]] add-ons clean cookies ... ), but the problem is not in the Flash Player to crash. It works. But I can not manage alone plugin container volume and alone audio browser.
    I am not a programmer, so I do not know how I can change it yourself.
    Maybe someone already has it done? I would be grateful if you divide.
    Sorry for my bad English. Here's screen shot if I can not clearly say:
    http://img94.imageshack.us/img94/707/ffsupport.jpg

  • How Can I Control a Windows PC from Apple Remote Desktop Please?

    Hello Everybody
    Please excuse my bad English.
    I would like to ask you, how could be possibile setup windows pc (XP or 7) to be controlled by a Mac with Apple Remote Desktop 3.7.2
    I think I have to use VNC, but how can i SETUP to connect XP or 7 to my Mac Apple Remote Desktop in the same LAN?
    Thanks a lot
    Giovanni

    You can use ARD to remote control a windows machines, ARD is built on VNC
    You'll have to install a VNC server on the windows machine you want to access
    You won't be able to use most of the ARD features as they are specific to mac
    You'll be be able to see and control the desktop and that's about it
    You can also find VNC /Remote Desktop apps in the iOS store that will allow remote desktop connection from iPad /iPhone,
    There is a mac version of Microsoft remote desktop in the Mac App Store

  • HT204088 error 5002 Windows Vista went attempting to buy from wish list online "expert" from apple no help waste of time

    Apple support is useless from self proclaimed "expert"

    Have made purchase from wish list yesterday, no problem but error code now present with attempt purchase. Have tried uninstall reinstall itunes no change.

  • Disabling "User Details window" when adding modifiedby  to LAyout

    I am very new to the KM layout tools, So I appreciate any basic information you can share.
    I have copied the SimpleExplorer Layout set and I am in the process of Layout customization.
    I want only the DocumentName, Modified Date and Modified By to appear. I have taken out most actions: settings, goto... etc.
    I have been able to get this done,
    The problem is:
    When I include the "ModifiedBy" to the Displayed Properties of the  Collection List Renderer Settings the ModifiedBy field appears but allows a user to Click on it,
    when Clicked a new window opens  with "Users Details".
    The Users Details Window has the following options and we do not need/want this functionality.
    Send E-mail... Create Appointment...
    Show Availability Send Instant Message...
    How do I include the ModifiedBy field for display and sorting but deactivate the Link to the new window "Users Details"
    Thanks for any help,
    Sarah

    Hi BP,
    I just came accross the solution below given by you in another thread.Is this the one I need to do?
    And one more question.I see the "Send Instant message","Create Appointment" and "Show Availability" in the "UserDetailsGroup"
    So is it enough if I remove these 3 command properties from the "UserDetailsGroup"?
    I am using the DiscussionGroupsContributor layoutset.
    BP's SOLUTION:
    Business Card Pop Up Customization (Removing the standard collaboration options)
    Changing the default options available in the Business card Popup, We need to go to
    System Administration->System Configuration->Collaboration->Properties->Command Groups.
    Now edit the three groups which are:
    1. clpGroup
    2. UserDetailsGroup
    3. UserGroup
    Note:
    The above actions require the server to be restarted to make the changes to be effected
    Edited by: Sudha A on Apr 1, 2008 6:28 PM
    Edited by: Sudha A on Apr 1, 2008 6:37 PM
    Edited by: Sudha A on Apr 1, 2008 6:38 PM

  • Batch Details window should show warehouse name

    The window shows warehouse connected fields e.g. location, but we could not make visible the warehouse.
    We can use for example the field Location to store information about the location of the batch in the warehouse, but to make visible which warehouse it refers, we should show the warehouse in an other field!
    The problem may arise from the redundancy of the OIBT table. It stores information about the batches by warehouse, and the system synchronizes the common information in it. The batch details window is based on one entry from the OIBT table, shows different information for a batch on more then one window (if the batch exist in more then one warehouse), but does not show which warehouse it refers.

    Hi Michiko,
    First of all, did you also extract the HRP1002 table? HRT1002 has the key field ADATANR but this won't link to an orgunit ID without data from HRP1002. You need your new data to be linkable to an orgunit so it can be added to an orgunit data table or its own data table can be linked to an orgunit data table within the application.
    In AppResources.xml you need to add a data element or change a data element, depending on how your new fields are added to the database (new table = new data element / existing table = update existing data element). I woudl suggest adding the data to an existing data element otherwise additional configuration is required. You can probably add the new data to the database table that contains the orgunit data. This would then mean they would be available in your details designer in the Edit fields list.
    I hope that helps!
    Luke

  • Control of Windows Applications with Creative IR Rem

    In other threads, Jeremy has referred to controlling Windows applications w/ a Creative IR remote.
    However, he did not identify specifically how to do so, i.e. how to control specific functions w/ in a Windows applications.
    I would like to control Windows Media Player with the Creative IR Remote (RM-500) that I use w/ my Audigy 2 NX. Can I program the keys of the remote to manipulate the controls of Windows Media Player, e.g. to select songs, play lists, and other settings? If so, specifically how?
    Further, what does the "Parameters" and "Start In" inputs in the Window Applications Properties window in the Remote Control and OSD Settings Program permit's How does one use them?
    Thanks.

    Have you installed HP Quick Launch & ENE CIR Receiver from your drivers page?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3772...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • [LV 5.01 & Win98] Control a Windows Application

    Hi merry wirers!
    I'd like to control a windows program from out of a labview VI.
    Using DDE (I don't know how do that but there ought to be examples
    somewhere ) I could OPEN it allright ... But what I would like
    to do is to enter a few numbers into one of the programs forms and
    (which are to be found under a certain menu item which would also
    have to be selected) and hit the button.
    How would that have to be done? Can one sort off imitate key strokes
    under labview? I could start the application by the EXEC.VI ...
    The scripting host? I've never done anything with that so I'd have
    to learn that too. How would one have to start a script from LV?
    Use the CSCRIPT.EXE?
    Thank You,
    Christoph

    I assume that you are using RAS. Check the documentation there's a call to disconnect a current connection. I last worked with this stuff a year or so ago and so don't remember the exact details, but it was very easy to do and was in the Windows documentation on RAS.
    I do remember that it was all done through the command line because I had to come up with a way to trap the RAS responses and return them to LV.
    I know this isn't a complete answer, but I hope it points you in the right direction.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for

  • Database connection in a WebDynpro Application - urgent

    Hi I am facing a problem with database connection. I am trying to develop a normal webdynpro application. I want to retrieve data from a table and show it. But my query is not giving the expected output. It is not even raising errors. Please give me

  • Wanting to make the switch to an Apple, but 128MB VRAM is in the way

    I'm a Windows user, have been since I got my hands on a computer. I've continued using Windows to cater my gaming hobby, I currently play Counter-Strike: Source and World of Warcraft online on a regular basis. That's it just two games. My new job all

  • Good books for java web services

    hi.. i want to learn java web services. can anyone pls tell me the good books or material if any to start with. I have exp in core java.

  • Transporting Process Chains

    I have not transported process chains before so wanted to check: When transporting process chains do they by default come across inactive and you need to activate them on the receiving system, or are they supposed to be transported in the active stat

  • PO doesnot exixt while creating purchase order

    Hi all, I am getting an error while creating purchase order that " PO number doesnot exist". When I repeat creating it, PO with next number is getting created. What could be the reason for this?