Control flash sound level

Hi,
is it possible to control the sound level of the flash player from Windows Volume Mixer and have it permanently stay on the level I set? I'm using Windows 8.1. After every playback on Youtube, the sound level resets to the maximum level.
Thanks.

Hi alv93,
Yes, however the volume mixer does not sync with the volume slider on the flash plug in unfortunately.

Similar Messages

Flash Player sound level

Hi! Is there any way to specify initial sound level of all flash objects at webpage (via player settings maybe)? I want it low because it is so uncomfortable when I suddenly hear loud music or voice while browsing the web. I'm using firefox. Thanks.

I'm having this issue as well. When I go to any web site and play a flash video the sound is very loud. I go into the control panel (Windows 7) and into "adjust system volume." There is a slider for firefox and flash player. The firefox slider has no affect on the volume, but the flash player slider does. The problem is that windows or flash player does not save that level. When I play another video later, I have to go in and adjust the sound level again. Why won't it save the level like to other sliders do? Anyone?

Controlling flash in html.

Here is my problem hopefully someone can help me.
I need my swf to load a new level on a specific webpage url.
There are a few ways I can think of doing this. (I am not a
coder at all so bare with me)
(a) inside flash a code that says this. If on www.webpage.com
load swf on level 1000.
(b) in html, I have no idea how to control flash, could move
it to another frame. that would work. :)
and I'm sure there is something I don't know. Please guys I
am really stuck and need to figure this out.
Any help is much appreciated. Thanks !

Sounds to me like you need this:
[quote]LOL, Adobe is definately paranoid... I can't write
l-o-c-a-t-i-o-n in a post... so just remove the "-" in
l-o-c-a-t-i-o-n below
uh... maybe I'm completely wrong, but how about using
ExternalInterface.call to access a Javascript function
In HTML:
<script type="text/javascript">
function getLocation(){
return(document.l-o-c-a-t-i-o-n.href);
</script>
From what I read you need to allow script access explicitly
for this to work.
<param name="allowScriptAccess" value="always" />
In AS:
import flash.external.*;
String(ExternalInterface.call("getLocation"));[/quote]

How do I get a descent sound level and quality when exporting out of Logic ??

Hi guys,
I know this topic's been discussed many times before but I still can't fix my problem
I'm going crazy right now. It's been weeks I've been working on beats on Logic and I think they now sound pretty cool.
So I'm trying to export them out of Logic on mp3,or wav, or aiff but everytime it comes out very low. So when I'm applying different tips (limiter, adaptative limiter and different things I found on the internet... ) the sound level is a bit higher but still the quality is not as good as it is on Logic
So here's my questions : first, is it possible to get the exact same quality as the one you have when listening into logic ?
then how to get the best quality with a normal sound level so when you listening to the mp3 or wave or aiff on itunes just after a normal song you don't have to turn the sound up
Thank you very much for you help !!
Ben

And in addition to what octopi wrote ……
Related Articles:
Mixdown for Mastering - written by Holger Lagerfeldt
http://www.onlinemastering.dk/mastering-faq.html
Loudness when Producing and Mixing - written by Holger Lagerfeldt
http://www.gearslutz.com/board/music-computers/468170-loudness-when-producingmix ing-
tips.html
Overload in Signal Conversion - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2003_overload.pdf
0 dBFS+ Levels in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2000_0dbfs_le.pdf
Level Control in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_1999_level_co.pdf
Cheers

My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

i use professional studio monitors to monitor the audio
the issue , is if i turn up the audio it will clip on premieres main output. so i cant turn it up any more.
the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects maybe there is a hidden master output that im unaware of

Sound Level adjustment causes sound bumps in video

Hi, When I adjust the sound level on an MP3 track two sound bumps/thuds/heart beats are magically inserted into the center of the main video's audio. They do not show up at the point of the adjustment handles, nor at the transitions. In fact, when zoomed in a lot, they seem to be on each side of the video icon for the particular video segment. They come in pairs and are about a second apart. This isn't the sound glitches at the transitions about which many write. Anyone else experience this?
Thanks, Jim

I've tried that slider on iDVD with no effect. Not sure what it is for, in fact. Maybe someone else can help. David Pogue's Missing Manual book on iMovie and iDVD doesn't mention that control.
But I do know that to adjust the sound within the project, you need to be in iMovie. There are several editing tools to add sounds, adjust levels, etc. I have in fact found this to be the most time consuming part - not technically, but to produce a project where the sounds are not too loud or too soft, insert the appropriate background music, edit out peaks, etc. Techincally easy to do each piece but a lot of work to really get the audio to match and enhance the project.

Controlling timeline sound

Hey guys, i was wondering if you would be able to help, PLEASE!!
I'm making a presentation in flash, it has 3 segments, 1st is sound in sync with timeline 2nd is a video which is streaming and third is sound insync with timeline again.
I can control the video thats no probs, but i want to be able to control the sound/timeline.
What i want to be able to do is put in some controls just pause play and stop and when i push pause it obviously pauses it, when i push play it continues to play and when i push stop it goes to frame 1 and clears what ever it was playing in the timeline previously.
I know how to control the timeline but not the sound!
any suggestions please?

You will find sound quality options for individual sounds if you double click on the sound in the library.
If you look in your Flash Publish Settings you will find sound quality options for all streaming/event internal sounds. These global settings can optionally override individual sound quality settings.

Can the Sound Object control two sounds at once?

I have a sound object that I want to control two seperate
sounds in different movie clips..one is intro music which lives on
the main shell of the website along with the sound object. This
fades out into a loop that lives on another movie clip that loads
into the shell on a loadMovie action naturally.
My goal:
To control both sound clips with ONE sound object living in
the main flash site's shell. Can this be done or would I have to
have two seperate sound objects for each sound clip?
Thank you,
Dayton

You could write a fairly simple class that would act as a
wrapper for the sound class. In this class you would let it define
the 2 sound objects but then you would only need to use call to the
class object to control both. This could also be expanded to
control more than 2 sounds. It is not exactly what you were hoping
for but in the long term it would simplify sound control and be
reusable in pretty much any setting that required sound.
Tim

No Flash Sound on YouTube

HP Pavilion Entertainment PC dv9700
Service Tag dv9910us
Window 7 Ultimate 32-bit.
Get no Flash sound on YouTube or CNN. Get good sound from YouTube videos saved to hard drive by Realplayer. Then the saved YouTube video plays everywhere: Windows Media Player, VLC and Realplayer. I recall the YouTube sound disappeared in the last weekend of Nov 2011 when Flash was automatically updated. At first it was intermittent and then silent forever.
So far. No luck. I deleted and reinstalled Adobe Flash. Even tried the Flash Uninstall Utility. Actually I deleted everything with Adobe listed on it vias Control Panel Uninstall. I deleted the sound driver for the Conexant High Definition SmartAudio 221 and reinstalled. I even unpdated it. I consecutively deleted and downloaded the latest versions of IE, FireFox & Chrome. I tried Microsoft Fix-It.
In Device Manager, there are two yellow warnings. NVIDIA nForce Networking Controller (Code 10) and USB Host Controller (Code 43). I don't know if one of these can be the issue.
One weirdo. Sound worked for 30 seconds one night the first week of March when my wife innocently started to watch YouTube. When I realized it and called it to her attention, the sound disappeared. Go figure!
I'm thinking of restoring Windows 7, but that will create a lot of work for me.
Any new information on a fix?
With so many complaints -- it seems -- everywhere, I'm surprised someone like Adobe has fixed the problem?
Naive question: Are we locked into Adobe Flash Player for YouTube or CNN?
Thanks.

Do you hear audio on either of these two pages?
Test 1
Test 2
Please follow the instructions in this FAQ for a few troubleshooting steps and further details on what we'll need and how to report this issue to us for investigation.
How do I troubleshoot and report problems with Flash Player Video?
Thanks,
Chris

HP Pavillion 15-p046na sound level on playback

Hi,
I've recently bought an HP Pavillion 15 laptop with AMD/Realtek HD audio hardware and Beats Audio.
Windows 8.1operating system. It's brand new out of the box with no updates made.
When I playback mp3 music via Windows Media Player, the volume is getting boosted during quiet parts. This is especially noticeable on tracks which fade out, the sound level gets progressively higher as the song fades out, like it's trying to maintain a constant playback volume. This creates a lot of background noise on music recorded from vinyl, for example.
I've checked it isn't the recording, by transferring the same mp3 file to another device and playing it there - the song plays back exactly as recorded, no problem.
I can't find any options in the audio devices (or beats audio) which might control this behaviour. Is there an equaliser somewhere in the system?
p.s. it behaves the same even with Beats Audio disabled.
p.p.s it behaves the same with internal speakers, headphones and external speakers.
This question was solved.
View Solution.

Hello, @MusicManJohn
Welcome to the HP Forums.
It appears that you're having issues with audio playback. I will try to assist you on this.
As you mention not dong any updates yet, start with those. Complete all Windows updates, then use the HP Support Assistant to make sure all drivers are updated.
From there, read over this document:
No Sound from Speakers (Windows 8)
You have checked a few things from it already, just go over to see if there is anything else.
You can also try these steps (not sure if they will work for this issue, but have for other audio issues)
Open Windows Control Panel > Sound > Under Playback tab, double click on Speakers to open Properties > Go to Advanced tab > From the dropdown, select the highest quality stereo output. By default its on the second lowest setting which is DVD quality > Apply and close.
If that doesn't help, try this:
Move from the Playback tab to the Recording tab. Double click on Stereo Mix to open the properties and repeat the steps done earlier. Go to Advanced tab, select highest quality from the drop down > Apply and close.
Please let me know how this goes.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Extract audio from .fls (Flash Sound Bundle File)

Greetings!
I would like to ask if it's possible to unbundle a Flash
Sound Bundle file? I've downloaded FlashLiteBundler.exe to check if
it can also unbundle, but it could not. A client wants to reuse
their audio files from a previous project, but alas, they could
only give us files of .fls format.
Any ideas on how I can go about this?
Peace!

Hi kglad!
Thanks for the reply. :)
1) The sad part is that Flash Lite 1.1 Sound Bundler only
appears as a flat square with the words "Drop Sound Files Here." A
few audio files are supported, such as .mid and you just drag the
audio onto the square, until a window appears which says, "MIDI
file __.mid added, size ___ KB" There are no other controls there
except the Delete, Clear All and Save Bundle buttons.
2) When I try dragging an existing .fls file (the one from
the client), it says "Unknown sound format, file not added."
3) When I try dragging an .fls file which I made myself using
Flash Lite 1.1 Sound Bundler (FlashLiteBunder.exe), an "OK" message
box appears, which says "1 device sound found. MIDI (___KB)". Other
than that, I can't get the Sound Bundler to do anything else.
I was wondering whether there's another way to unbundle using
another Flash tool, or maybe the bundled file is in a known format
which I can unbundle with something else? When opened in a text
editor, the .fls files from the client begin with "FWS".
Thanks.

Any automation for output sound level conflict?

I just upgraded my home computer to a shiny new(er) G5 iMac, running 10.5.5. I don't know which of those are the necessary conditions for a change in output sound level behavior that I'm trying to tame. I have generally kept my cordless headphones permanently plugged in, rendering the old machine (G3 iMac, 10.4.11) silent to the outer (quiet) world of my house, including when it does a scheduled startup in the morning with some people still asleep. This worked well until the new machine arrived. Now the machine is still silent (outside of the headphones) all the time except when it powers up -- the startup chord now plays through the speakers regardless of a plug in the output jack. The problem comes with the output sound level. For headphones, the overall sound level needs to be at maximum. But the overall sound level seems to be the only volume control on the startup tones, and it is then at wherever it was set when the machine was last shut down. So if I forget to run the sound level down to 1 or zero before shutting down, the startup blasts everyone out of bed! So: I now have a sticky note on the iMac reminding me to turn down the sound at shutdown, which will usually work. My question: is there a more elegant way? Is there some way to automate the turning down at logout time, say? I'm inexperienced at scripting, but happy to learn. Any and all suggestions appreciated!

There were no responses to my problem, so I will post a resolution. I dug a little, and found there are several add-ons out there for this problem.
One is http://www5e.biglobe.ne.jp/~arcana/software.en.html, which has the elegant interface of an added system preference pane. However, it is in a beta release, and temporary administrator authentication does not work. As far as I can tell, in order to get it to work, you have to login and run with administrator privileges, never a good idea. Maybe someday this app will work.
But I hit paydirt with an app called Psst, http://www.satsumac.com/Psst.php. This does just what I wanted. The interface isn't as elegant; you just run the app and make your settings, then quit. It leaves a daemon process running at every startup that does just what you want: it saves the global audio volume and resets the volume to the Psst setting at shutdown. Then at the following startup, the startup chime sounds at whatever the Psst setting was, then the audio volume is set back to the saved value. You can just forget it's there, having once set startup volume level.
Too bad that Apple didn't build this in the latest Mac OS, but Psst seems to fill the gap.

Sound level too high new iMac

I see many complaints about low sound, but i have the opposite problem. Whether I use the earphone jacks or my USB headset,the sound level is uncomfortably high.
The only way I can make it at all reasonable is to drag the volume down to where it shuts off and then go into Control Panel to unclick the "Mute" box, leaving the volume bar where it is.
Is there any way to recalibrate this so that the volume slider is useful?

If the audio is clipped there's not much you can do other than re-record. But there is this: http://www.izotope.com/products/audio/RX/
-DH

Having trouble with iPhone 5 sound level changing.

When I touch the edges of the side of my iPhone 5, the phone vibrates and the sound level goes to zero. I have to press the sound level button to change it back to whatever setting I had it at in the first place. Any suggestions to solve or is this normal?

Hello Wildcat74
There are some steps to try out that I have highlighted for you in the article below for iPhone hardware troubleshooting.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera is not functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Sound Level

I have connected my Apple TV to seperate speakers. (Speakers from Bang & Olufson with buildt-in amplifiers, Beosound 4000). Im using my Iphone as remote control. Dont have TV connected, am only interested in sound.
But the output sound level from the Apple TV is way to high. Cant turn the volume down enough. It goes from OFF og loud, just with one step on the volume bar on the remote.
Is there a fix to this problem ?
And please, a fix that does not involve buying other speakers.

Are you connected via analogue cables or optical?
'one step' on which remote, the B&O remote?
I would not expect AppleTV to output on analogue at a higher level than any standard line level device - you're not connected to a high sensitivity input on the B&O such as a phono or mic input are you?
Far better to have the AppleTV output it's music at a standard level and to control the volume on teh B&O unit in my opinion.
AppleTV only recently had volume control for music using the white remote up/down arrows - seems to work ok but I had my reservations about it reducing sound quality in the past.

Control flash sound level

Similar Messages

Maybe you are looking for