Control Function

hi,
What is vendor a/c control function? what is mat. type control function?

material type controls the
screen sequence in mm01
it trigers the fileds status in the views .some fileds will be mandatory /optional/suppres etc.
it controls the quantity /value updation
it controls the material stauts
and many more fuctions

Similar Messages

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

Enable Dual control function for FBZ2

Hi,
Its related to Dual control functionality for vendor master data. I got a issue, if I change the sensitive fields for a vendor master and run F110, then it shows exception that vendor master not yet confirmed.
IS it possible to post outgoing payment through transaction FBZ2, in this case?
I have seen some transactions where the clearing document was posted by transfering the payable amount to intercompany or offsetting account and making payment later, without getting any exception, eventhough vendor master change not yet confirmed.

hello, anisha.
like you, i have also wondered what the payment block in the customer master is for. after reading the documentation and asking an FI consultant, i gather that this block is apparently used to prevent automatic payment transactions for a customer.
again, why anyone would want to automatically post payments for a customer is an issue i wish to explore. perhaps this applies to scenarios where very many customers pay the exact invoice amount or have the payments guaranteed? or perhaps to prevent automatic offsetting of a customer/vendor account?
regards.
Edited by: jonathan y on May 6, 2009 10:23 AM

Deductable and Non deductable Control function for CVD A/C during Import Procurement.....

Hi Expert,
I have a requirement like my client needs to take credit availed on CVD (JCV1), ECess on CVD (JECV) and H&SECess on CVD (J1CV) in Import procurement for one Company code. for 1000, however client doesn't want to take credit availed for another company code for 2000 on CVD (JCV1), ECess on CVD (JECV) and H&SECess on CVD (J1CV) and the same value need to added with material cost at the time of MIGO posting after Custom Invoice posting.
Please share your view how can I control this thing through Account key and accurals in pricing procedure else any other control function available for the same.
Thanks in Advance,
SKN

You need to add CVD on material cost for company code 1000 not for    2000.
So you have   to maintain   the two pricing procedures   for 1000 and 2000
should not be maintain any accural/account key for JCV1   for 1000
Remove the account no in Company code settings in CIN

Error 2186: The service is not responding to the control function

Every time I start the Messaging Server I get an error message. The server
is running and no event log errors are reported. I see:

Could not start the <%hostname%> on <%computername%>.
Error 2186: The service is not responding to the control function.

This occurs because the system does not have enough remaining memory to
create a new desktop heap for the service being started.

The limit can be raised, but doing so requires changing registry entries to
allow more but smaller desktop heaps for Windows NT services.
The best solution is to limit the application connector instances to seven
or less.

For instance, you may make a change from 0 (zero) to 1 (one):

HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Control
Session Manage
HeapDeCommitTotalFreeThreshold

Or press Ctrl-F to find "heap".

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

Reg. Control Function "MM_PO_TEXT"

Dear Experts,
Can anybody explain about the functionality behind Control Function "MM_PO_TEXT". My requirement is that the user must be able to copy the text from one PO into another PO using Control Function "MM_PO_TEXT".
Thanks in advance,
Regards,
Ramesh Manoharan

closing the thread

What packages allow access to motion control functions such as flex_initialize_controller, flex_start, etc.?

Hi,
I am new to programming using the motion control functions. I have already downloaded the software and drivers necessary to implement these functions. I am just confused which packages I need to include for Visual C++ so I have access to these functions. Thank you very much!

Hello Chowchow,
In order to use the NI Motion driver for C++, when you are installing the driver, ensure that Microsoft Visual C support is included in the installation. Afterwards, the NI Motion C reference can be found on the Start Menu under National Instruments > NI-Motion.
Hope this helps,
Robert
PS - The driver I refer to is the NI-Motion 7.0 driver.

Mac 'control function' modifier key fault

Mac control function key fault - the dropdown menu that appears when you press this key appears intermittently without pressing the key.
I have disabled the key, via the 'modifier key' preferances, with no effect.

Thanks for your reply but the standard mac mouse I have does not have right click
What's the "standard" Mac mouse? If you mean the white Mighty Mouse, it does. And that may well be the issue.
Check out the settings in your Mouse Pane of SystemPreferences.
Regards
TD

Zen Micro - MTP playback control functional

I want to buy a zen micro v2 which supports MTP.
I know that the v2 version of Zen Micro is MTP enabled player.
Microsoft has released MTP specification 0.83, which does not have playback control functionality. Mocrosoft has said that it will release the specification for this playback control in one or two months of time.But they have released an intermediate version of this MTP which has this playback control functionality.
A scenario to understand my question:
When you connect Zen Micro to a car stereo system, you can not control its playback functionality from the car stereo's head unit. To be more specific you can not issue Play/Pause/Stop/Volume increase/Volume decrease commands from the car stereo's head unit.
So please tell whether zen micro has this support? If not will it be providing this functionality in the coming months?
please suggest me any other Zen palyers which has this functionality.
Thanks in advance,
Regards.

DM, the Micro's remote control works exactly as you suggested; it's an inline remote that plugs into the headphone jack, and the headphones plug into the remote.
Unfortunately, I think the problem is more along the lines of car audio manufacturers' willingness to design a physical interface between a car stereo and the Micro than anything in the MTP spec. Microsoft can enable this kind of control in the MTP spec all it wants to, but until manufacturers are willing to use physical interfaces other than the iPod dock connector, it's all for naught.

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.
We have 10 Client Nodes in the field and we need two "View Only" functionality in Client machines located on Supervisory Desks.

I have done this. There are many ways to approach this but I will offer what I think is the easiest. This will work ONLY if you have been assigning security levels to your objects (objects that actually control devices in the field) greater than zero AND allowing a security level of zero to view all panels. When I develop interfaces I do this just for creating a non control client.
Basically, you remove all users from the Lookout client in the user manager. You will not be able to remove the built-ins, "Guest" and "Administrator". Now when the end users tries to login using his normal login he will be denied. Consequently, he will not be able to control. But, he will still be able to view all the information since a no login can view a panel with a viewing se
curity level of zero. You must ensure any pushbuttons that are used to open panels have a security level of zero.
Now you can copy this security profile by finding the lookout.sec file and copying it to another non-control client computer. In Windows NT this file is located in the system32 directory.
There are many other ways but I find this the easiest.
Regards,
Tommy Scharmann

Legal Control functionality for Purchase order

Hi,
We have a requirement where in while saving the Purchase Order, the system should look whether for that material if the legal control data/ foreign trade data is maintained specifying that it is a controlled substance then the licence should be maintained before saving the PO. If the licence is not maintained then the Purchase order should not be allowed to be saved.
In a nut shell, we want to control the saving of Purchase order depending on whether the licence is maintained or not.
This has been done for Sales order. The standard SAP functionality allows the document control.
This can be seen in SPRO - Materials Management - Purchasing - Foreign trade/Customs - Legal control - Document control.
Here we can see that only Sales order and shipping documents can be controlled.
Is there any way we can control the Purchase Ordr also?
Please let me know for any clarification regarding the requirement.
Regards,
Ramachandra DN

Hi Ramachandra,
this kind of functionality is not available in SRM. Have a look into GTS Module, which can be connected to SRM for achiving your requirement. http://help.sap.com/saphelp_gts30/helpdata/en/1d/8082ab7248f74ca09861d9713b9a52/content.htm
All somehow available control, compliance and trade features are available via GTS. Any further need to be accomplished via self development.
Cheers,
Claudia

Great leap backwards in Grid Control functionality.

Unfortunately I find myself using a newer version of Grid Control / OEM that REQUIRES use of the Flash plugin. You don't have a choice. So I use Flash reluctantly, the graphs appear, functionality appears just fine until I right click on the legend of a performance graph to try to drill down using "open in new tab" and instead I get the previously-mentioned little menu about "print/whatever/about Flash player".
What an annoying leap backwards in functionality. You can't leave the existing window open and open a new tab or window, instead you're allowed to replace the current screen with the drilldown screen. And then after drilldown, at the top of the new screen where hopefully there would be an HTML link that would allow me to at least try to open the previous window ( Top Activity ), there is no such link.
What a foolish choice to require the use of Flash. What an annoying downgrade of functionality. Now I can smoothly drag a gray box back and forth on the screen to highlight the time slice I'm interested in, but I can't do the things I really would like to do like drilldown while retaining the original window, save a single graph to a graphics file to attach to a mail message, etc.
I used to be able to save performance graphs and include them as attachments in email. Now instead with Flash I can "print" them to a file - unfortunately a) it's gray scale not color and b) it only shows the left half of the graph and c) it saves all of the graphs on the page when usually I'm only interested in one graph.
Guess I got spoiled by not having to use flash. I wonder how long we'll have to wait for Flash to include startling new right-click functionality like being able to print a single graph or have links on the plugins behave like actual URLs - instead of giving us a Print/Settings/About Flash 9 menu . Settings menu actually includes the remarkable privacy settings menu with which you can allow the remote computer to access your camera and microphone, or the Local Storage menu where you get to specify how much information the grid control server can store on your computer. I have been waiting for those functions with bated breath, after all who needs to open another window with useful data when it's possible to provide someone on a remote computer to access your computer's accessories.

I have modified my /etc/hosts file and the problem is solved.
and I don't think the localhost.domain line should be commented.
if so, the listener can't start successfully.
anyway. thanks for you reply.
Edited by: user6748141 on 2009-10-19 上午12:18

Access Control functionality in Oracle workflow

Hi everyone,
I am doing research into access control models and workflow systems (separation of duty policies in particular). As far as I could tell, Oracle Workflow does not provide much in terms of securing access to data in a workflow process (except from the normal login authentication of course).
One usually assigns a task's performer to a CONSTANT role from your database roles so that only certain users will have access to that task. This is not always enough though, especially when the role-hierarchy is not properly contructed and maintained. So, I've been working on a few scripts to dynamically prevent users from receiving tasks on their worklists based on their previous participation in the process (e.g. to prevent a manager from approving his own leave application).
I was just wondering if anyone else have been working on access control in Oracle Workflow. Is there any built-in functionality that I missed that controls task-user assignment?
Thanks,
Carmen

Thank you very much Sirish for your help.
We are facing huge performance issues while Risk Analysis with Oracle Application servers through Greenlight Adaptor - its taking around 10 hours for 3000 users. Can you please point out what can be the possibilities and how can we trace out exact root cause and then solve it.
This is happening on GRC AC 5.2 SP10 and GRC logs doesn't say much , it just gives output taken 12 secs for one user Risk Analysis.
Here is our understanding on how GRC does Risk Analysis and our observations on our systems -->
1. GRC asks for 1 user details at a time from Oracle Application Server - please confirm does GRC do Risk Analysis for one user at a time or a bunch of users?
2. Oralce App server get details of that user and sends back results to GRC.
3. Now there is a wait time for around 3 secs before Oracle Server gets request for the second user. 3 sec for one user means 2.5 hours of wait time for 3000 users. We are not able to understand why Oracle Server needs to wait for next user request from GRC?
Would highly appreciate if you can share your experience on GRC Risk Analysis with Oracle (Greenlight Adaptor) and with SAP systems.
Best Regards
Davinderpal Singh

What are the control functions of Suitability and setup type key in work center?

Hi all,
Can any1 plz tell me what is suitability and setup type key in workcenter default values tab?
what are the functions controlled by these keys?

Hello,
Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
Almost in all the PP we define same Control key to the work center as well in the routing.
For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
Regards,
Piyush

File browse control function panel

How to create a file browse control on function panel? Data type for file path is char*. By dropping a input it does not provide with the browse button.
Thanks
Attachments:
Image.png ‏4 KB

This help topic describes how to add the ... button on the function panel and associate a callback to it.
You could start from the example from samples\functionpanels\Customization\SelectColor.cws and write a function like this:
int DLLEXPORT CVICALLBACK SlectPath (FPCustomInfo *info)
   char path[MAX_PATHNAME_LEN];
   int parameter;
   FPCustom_GetSelectedParameter (info, &parameter);
    FileSelectPopupEx ("", "*.*", "", "select file", VAL_OK_BUTTON, 0, 0, path);
   /* additional processing to convert path into a string literal - enclose in quotes and
   replace special characters like '\' into escape sequences */
   FPCustom_SetParamValue (info, parameter, path);
   return 0;

Control Function

Similar Messages

Maybe you are looking for