Control indicators for MIC

Dear All,
when i create MIC with reference to a class char. then it automatically picks control indicators. please let me know from where it picks these control indicators as i have to change these settings. so that when i create MIC with ref to a class char then automatically my settings will be there instead of changing one by one.

As per my understanding it picks this control indicator from the type of class char ( Data Type) you have referenced.
Like Numeric ( quantitative) or Char ( qualitative) data type.
There is no customization for the same.
This can be seen through the massage that you get during creation of MIC with reference
Values and control indicators are reset according to the class char.
Message no. QS088
Edited by: Sujit Gujar on Mar 23, 2011 2:23 PM

Similar Messages

  • Mass change of control indicators of MICs

    Can we do mass change of control indicators of MICs?
    We having requirements to updated upper and lower limit for thousands of MIC in insection plans. what

    Hi Tom,
    Then itu2019s nothing but mass maintenance and very well possible. No need to develop any LSMW or BDC. Follow these steps.
    1.     Execute CWBQM transaction code
    2.     In current working area put Q_TSK_000000000010
    3.     Click on additional select criteria
    4.     Click on u201CInspection Characteristicu201D tab
    5.     Below that, mention your MIC code, (ABC1 in your case), version of MIC and plant
    6.     Then click on u201CInspection Characteristicu201D detail symbol. (Ctrl+F7 is the short key)
    7.     It will load all the task lists with group numbers which contain this MIC.
    8.     Click on u201CQuantitative datau201D Tab
    9.     Here you find Target, Lower and Upper values.
    10.     Click on Edit ->Select-> Select all and then go to Extras ->Mass change
    11.     It will open all the fields in editable mode.
    12.     Select one column. Letu2019s say Lower value column
    13.     Again click on Edit ->Select-> Select all
    14.     Then again go to Extras ->Mass change
    15.     Then system will ask you to put new value
    16.     Put appropriate value and execute.
    17.     Similarly repeat this for all quantitative data.
    Regards,
    Anand Rao

  • Control indicators for controlling area XYZ1 do not exist". Pls help.

    While Posting to the Customer Downpayment thru t code F-29. following error occured "Control indicators for controlling area XYZ1 do not exist". Pls help.

    Hi,
    You forgot to maintain control indicators for the controlling area. Go to OKKP transaction, select the controlling area and maintain the indicators...
    Regards,
    Eli

  • Reg. Control indicators for controlling area NCCP do not exist

    Dear Experts
    I want to create purchase requisition (ME51N) then the following error occured. Pls help me.
    Control indicators for controlling area NCCP do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2008 for controlling area NCCP.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area NCCP, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
    Thanks
    Rajakumar.K

    Hi
    Goto SPRO-> IMG-> Controlling-> General Controlling-> Organization-> Maintain Controlling area->
    Select your controlling area & Click on Activate components/control indicators & Activate the compnnents
    Cost Centers
    Order Management
    ProfitAnalysis
    Acty-Based Costing
    Select the Check boxes below them & Save the details
    This should solve your issue
    Thanks & Regards
    Kishore

  • Control indicators for controlling area donot exist"

    I have created one po order for which I am getting the error as"control indicators for controlling area donot exist"
    Can some body tell me me how to solve ths issue and wt settings needs to be done in IMG
    Regards
    Chitra

    Go to OKKP Transaction code.
    Select your controlling area and double click on activate componentes/control indicators (Left side).
    Now, maintain Fiscal year... and Activate cost centers etc., and save the data.

  • Control indicators for controlling area BP01 do not exist

    Dear Experts/Gurus,
    I am getting the following error message "Control indicators for controlling area BP01 do not exist" while trying to upload employees HR Master data in PA40.
    Please let me know how to sort out this issue asap.
    Rgds,
    Vikrant

    Hi Vikrant,
    Go to OKKP -> controlling area BP01 -> "Activate component/control indicator"
    Press new entry -> Insert Fiscal year for 2009.
    You may wanna consult your CO guys.
    Regards,
    Dilek

  • Control indicators for controlling area IBM1 do not exist

    hi,
    Can any one tell me abt this plz--
    Control indicators for controlling area IBM1 do not exist
    Message no. KI102
    Role VN not defined in master record for vendor SITA
    Effective price is 802.01 INR, material price is 1,000.00 INR
    Please help me
    Thanks And Regards,
    Swathi

    Hi,
    Go to "OKKP" and maintain under option "Activate components/control indicators"

  • Control indicators for controlling area 8010 do not exist

    Dear Experts,
          When i use PA30 to input some personnel data  startdate is 2003.11.25, occurs error:
    Control indicators for controlling area 8010 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2003 for controlling area 8010.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 8010, fiscal year 2003 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year
    Can you tell me how to configure this setting?
    Best Regards,
    Merry
    Edited by: merry zhang on Dec 7, 2009 8:24 AM

    Hi,
    Goto transaction OKKP Check select Activate indicator and see whether for that year control indicator are maintained.
    Regards,
    Sreekanth

  • *Control indicators for controlling area U100 do not exist*

    Hi Friends
    Please solve the errro while makeing Sales order
    Error is
    Control indicators for controlling area U100 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2008 for controlling area U100.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area U100, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year

    Hi,
    GOTO t-code OKKP and check whether u have selected particular controller indicator like cost center accounting, activity,Profit center , Profitability analysis. Select from this indicator which you required.
    Regards,
    Sreekanth

  • Control indicators for controlling area 1573 do not exist

    Hello All
    Control indicators for controlling area 1573 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2009 for controlling area 1573.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 1573, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year
    1573 is my company code as well as my controlling area
    This is happening in my sandbox server from to day morning only as it looks like somebody has tampered the settings which doesnot allowing me to create a sales order itself to do any testing
    I am totally handicapped and without solving this error i will not be able to proceed at all
    This error has come for the first time whilre creating the sales order
    Waiting for your valuable inputs
    Regard
    Raja

    Hi,
    Please go to OKKP and see the validity period of controlling area FROM year to TO year.
    OKKP
    Select controlling area
    Double click
    Activate components/control indicators.
    I believe somebody must have deleted the year.
    You need to enter the control indicators FROM year to TO year.
    Please let me know if you still have issues.
    Regards,
    Ravi

  • Control indicators for controlling area

    Hello,
    I am new in PTP process. While creating purchase requisition, I am getting following error(Detailed error message, diagnosis and procedure to resolve(given by SAP) is attached below). Can somebody please tell me how to resolve this problem step by step?  
    Error Message-
    Control indicators for controlling area AB01 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2009 for controlling area AB01.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area AB01, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
    Regards,
    Milind Dumbre

    Hi,
    Go to OKKP Transaction code.
    Select your controlling area and double click on activate componentes/control indicators (Left side).
    Now, maintain Fiscal year... and Activate cost centers etc., and save the data.
    regards
    Anand.

  • Control Indicators For Controlling area(for company Code) do not exist

    Hi Masters
    please any one help me to solved this error i.e. when i m creating purchase order through ME21N and at the time of save system shows the msg. "Control indicators for conrolling area SS88 do not exist". (My co. code and controlling area Is "SS88" in my practice server at my home).

    Dear Swapnil Ashtankar
    Go to OKKP, select your controlling area and double click on Activate Components / Control Indicators and Activate for the current year. and select cost centers componants are active, & select check box Activity type & select order mgt active , commitmnet magt active,
    regards
    shankar

  • Control indicators for controlling does not exist

    Hi,
    While doing g/l posting I got this error "Control indicators for controlling area----does not exist"
    Please help me with the solution.
    Regards,
    Jyoti

    your config is missing go to tcdoe OKKP, selecet your controling area and then select the tab activate components  and make sure they are active and the boxes are ticked
    Points will be appreciated
    Regards,
    Zaid Azam

  • Control indicators for Controling Area

    hi,
    SAP Guru,
    Control indicators for controling area not maintain in company code.
    what to do?

    Hi Bhushan,
    Control Indicators has to be maintained in Controlling Area.
    Path: Controlling > General Controlling > Organization > Maintain Controlling Area > Maintain Controlling Area
    Whichever is ur company code, control indicators has to be activated.
    Ask ur FI Consultant to help regarding this issue.
    regards,
    vimal

  • Control indicators for controling area in scheduling agg

    dear friends
    i get an error while creating scheduling agreement  it says the control indicators for controlling area xxxx does not exist. please help me out with this.
    cheers
    john

    Hi
    Please contact  your FICO consultant.
    If you are practising your own , Please check the following settings
    1. SPRO-> Controlling ->General controlling --> Organization -> Maintain controlling area
    Please select Maintain controlling area in the pop up screen, and Select your company code controlling area, and click on Activate  Components/Control indicators on left side.Or <b>simple type Tcode :OKKP</b>
    Go to new entries and give the financial year 2007 and select Other control indicator as per requirement.
    Regards
    Ramakrishna

Maybe you are looking for

  • Trying to optimize this simple query

    Hi, I am trying to optimize this simple query but the two methods I am trying actually make things worse. The original query is: SELECT customer_number, customer_name FROM bsc_pdt_account_mv where rownum <= 100 AND Upper(customer_name) like '%SP%' AN

  • Exception in executing webservice

    Problem which im facing is : I have ZRFC which is exposed as a  webservice and imported in webdynpro application. The webservice structure(nested) has a table which I have to populate. When I am trying to execute the webservice from my webdynpro appl

  • PDF Display in Safari/iPad

    I updated my iPad 4 with the new iOS7.  I use Google as my browsing engine in Safari.  Since the iOS7 update, I can no longer view PDFs in my internet browser.  When I click any pdf link, the browser opens the pdf link in a new tab displaying a black

  • Frustrated trying to geyt my HP 6500 wireless to change its IP

    Hello.  I've been getting this error message for a while now: "Your printer has limited connectivity. Your printer is using IP address 169.254.161.70, which is not compatible with the IP address 192.168.2.4 of the PC.  Power off your printer and then

  • Hide link to SAPguiDetails from completed task list in UWL

    Below is the code I have in XML file to hide links to SAPGuiDetails. <Action name="launchSAPDetails" handler="SAPMiniAppLauncher"> <Properties> <Property name="display_order_priority" value="uwlExcludeFromPreviewDetail"/> </Properties> </Action> This