Control key activating wireless menu: T440s

I have a company-issued ThinkPad T440s. No admin rights, so I can't install anything.
Yesterday the tech helpdesk replaced the keyboard, and ever since, when I press the lefthand Control key a black 'Change Power Settings of Wireless Radios' menus pops up. This happens most of the time when I press Control alone and all the time when I press it in combination with other keys (e.g., Ctrl+C, Ctrl+V).
I tried going to Control Panel > Keyboard to remap the key, but all I have access to are speed settings, not key mappings.
Any ideas? Thanks!

the sad clown wrote:How frequently? Does your connection work for a few minutes at a time and then drop? And is the behavior independent of what network you connect to?
For example, I boot arch, networkmanager connects to network automatically. It works for a few minutes, then suddenly connection drops. When I refresh the page for a couple of times, it re-connects. This situation occurs again for example after 15 minutes and so on. So it is not a one-time problem occuring after boot. It happens continously.
I connect to same network both on windows 7 and arch linux. I don't have any trouble with network on windows 7, but on arch linux connection drops frequently.
Therefore I don't think that there is a problem with my network. However, I couldn't test with another network.

Similar Messages

Control key pop-up menu in arrange window

Argh. I would give a million dollars to get rid of the menu that pops up when you hit the control key in the arrange window. Every time I try to finely adjust the beginning or end of a region, that menu pops up.
It doesn't happen if you grab the region, THEN hit it, but I've been hitting the CONTROL key first for about ten years now, so it's not an easy habit to break. If anyone in Apple land is listening, please oh please give an option to disable the pop menu... pleeeze, it's killing me!!!
mds

+ 1

Activation of Bank Control Key field (P0009-BKONT) in IT 0009

Hi,
We got a requirement to activate Bank Control Key field (P0009-BKONT) in IT 0009 for the Countries Barbados, Dominican Republic and Trinidad & Tobago.
For activating this field, we copied a new screen for each country for IT 0009 and made the field P0009-BKONT as Standard in T588M (Screen Modifications). Updated the feature P0009 also.
When checked IT 0009, Bank Control Key is not found. Again, we have added the entries for these countries in table V_T521A (Bank details: Relevance of special fields) by selecting Control Key as Relevant.
Still no luck. Bank Control Key is not seen in IT 0009.
Can someone help me by providing solution how to activate field P0009-BKONT for the above countries. Thanks !!

Hi Sai,
You mean system uses this new screen but you don't see the field on it?
If this is npt the case and system does not select the right screen check the feature P0009 in PE03.
Regards,
Omid

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

T440s Control key getting stuck

I have a T440s touch screen version running windows 8.1 64bit Pro and using the latest 2.26 firmware.
Most of the time I use the laptop on an Ultradock with no issue.
However on the odd occasion when I use the laptop standalone I use the trackpoint (not sure if this relevant) and have found the computer is acting as if control is being presed. I am certain I have not used the Shift or control key and sticky keys is not on. When this problem occurs no amount of pressing control or shift resolves the problem and the only way to recover is to reboot the computer.
Anyone seem this issue or know how to solve it.

OK
So I've been doing a little more research and the only thing I can find is on some old ASUS and Toshiba forums with people reporting similar issues.
The most promising solution seems to be to disable 'Pinch to Zoom' on the trackpad driver. I'll give that a go and see how things progress.
As a side note I've only had the laptop a couple of months and I am pretty sure I didn't have the issue when I bought it, although it has since been upgraded to Win 8.1 from 8.0 and all firmware/driver patches applied (firmware 2.25 mentions some shift/control key fixes...Hmmmm...).

How to add keyboard control key to menu bar as shown

how to add keyboard control key to menu bar as shown bellow
Please help

why, nobody can give me any suggestion?!
I want to know how to get the specific Control from the Line which does not has this kind of Control. Currently, I met this problem -- the line does not support EnumControl.Type.REVERB, however, I want to exert the reverb control to the line.
please. thank you very much!

Control keys of latest apple wireless keyboard don't work on iPhone 4

Hello;
I just brought the latest apple wireless keyboard(2011) and I tried the control keys(briteness, music control, volume control) none of them worked on my iPhone 4(ios 4.3.5), but those shortcuts like: cmd+a, cmd+c...worked very well, I don't know what's wrong with this and I think those control keys are very useful, I'm planning to replace my old Lenovo laptop with my new accessory, who can give me a hand please!!! Thank you!

A number of folks have reported that the newest Apple BT keyboard, designed for use with Mac OS X Lion has this issue. Unfortunately the new KB has the same model number as the one for Snow Leopard. The way to tell them apart is the F4 key, on the Snow Leopard KB it has the Dashboard icon. I would try to find an Apple retailer with the Snow Leopard KB in stock and exchange your KB for one of them. The Snow Leopard KBs work great with the iPad, with all applicable function keys operating.

Control key PS05 for Service activity in Network Profile

Hi,
I am creating a network profile in OPUU in which in activitie tab -> Services -> I am using control key "PS05" tos g plan and procure external services through Services.
but it is giving me error - The control key "PS05" is not valid. Message no. CS070
Can you please guide me in resolving the error?
Wtih Thanks and Regards
Ratna

Hi
Go to OPSH - Choose PS05
The fields "External Processing" and "Service" - You can try to play around with these fields
Br, Ajay M

Activating WCM for control key WCM (operation level)

Hi Guys,
I want to activate WCM in the PM order when i enter WCM control key in operations.
I do NOT want to activate it using "Activate Work Clearance Management for Maintenance Orders".
I have done all the config but maybe i missed something as the work approval icon is not appearing for WCM key in order.
Can someone think of what i may have missed?

I guess it wont solve my problem as the WCM is working at operation level in another system without it
any more suggestions?

Voice Control and the main menu keep popping up

my ipod touch 3G has some interesting problems. the voice control and the main menu eep poping up and there are seems like nothing i can do. i already tried rebooting, but it didn't help. any ipod expert can help？really appreaciate.

hi,
Can you do a right click > properties on the Network Controller and on the details tab > dropdown menu, copy the hardware ID and post it here to find out the model/maker of the wireless card.
Guide:
Windows 7: Hardware Identification
Btw, were you using the ethernet cable a while ago when you downloaded the WiFi driver on the Y510p? If yes, can you try to reinsert it in and ensure fully contacts the ethernet (it'll usually make a click sound). When finished, press the Windows Key+R then type ncpa.cpl and ensure that the Ethernet connection doesn't say disabled or Network Cable Unplugged.
- Sample screenshot
As for the other devices that has yellow exclamation marks, these drivers should fix it (you may download these on another PC and install it on the Y510p).
SM Bus Controller:
Intel Chipset Driver
v9.4.0.1017
Universal Serial Bus (USB) Controller:
USB 3.0 Driver
v2.0.0.102
or
Genesys USB Mass Storage Device
v4.3.0.3
Unknown device:
Lenovo Energy Management
v7.0.3.4
Regards

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

Confirmation control key check for inbound delivery creation

Hi,
Currently, in the Client's company, the process of receiving goods from purchase orders looks like that (SAP-wise):
- create a purchase order,
- receive goods using MIGO and automatically create an inbound delivery,
- pack the delivery and post goods receipt.
Recently, some patches have been installed, including one described by note 1602047 (which basically enforces checking confirmation control keys if goods receipt assignment and goods receipt relevance are activated for inbound deliveries). Note says that it only affects two-step stock transfer and creation of automatic inbound deliveries using SPED output but it seems it also affects other basic processes like PO receipt in MIGO.
Now, when using the old control key (that had MRP-Relevant and GR-Relevant fields checked), the system is unable to automatically create an inbound delivery after the goods receipt is posted with MIGO (with message VL148 - Not possible to create an inbound delivery). I learned that this is because the "GR Assignment" field must be checked in the confirmation control key so it's possible to automatically create aninbound delivery after receiving a purchase order in MIGO.
After changing the confirmation control key to have the missing field checked it's not possible anymore to receive goods from PO in MIGO as the PO requires shipping notification in order to be processed in MIGO thus requiring of manual creation of an inbound delivery.
Is there any way to skip this check so the process would remain the same (this model has been working fine for few years in the Client's system) and the inbound delievery would be created automatically after posting the receipt in MIGO?
Thanks in advance,
Piotr

Hi,
don't know if you found a solution, but we received the following message from SAP:
The advent of the new version requires some attention to the users. It
was necessary to avoid inconsistencies which in the past version the
system was susceptible.
Main Program SAPMM07M
Source code of MM07MLVS
sy-msgid VL sy-msgty E sy-msgno 148
I have checked the process and through debugged I could confirm the
following information SAP is providing to all similar incidents reportedfor us:
Error message VL 148 is issued if in the confirmation control key used
in the purchase order, the fields for MRP-relevance (T163G-KZDIS),
GR relevance (T163G-WEREL) and GR assignment indicator (T163G-WEZUO)
are not set.
The correction of note 1602047 was necessary to avoid inconsistencies
(table EKES) in the purchase order. Without having the GR assignment
(T163G-WEZUO) set, there is no unique reference created between the
purchase order history (table EKBE) and the inbound delivery
confirmation (table EKES) at goods receipt which leads to a problem if
several inbound deliveries exist for the same purchase order.
If you set T163G-WEZUO to 'X', this assures that, for an inbound
delivery, the confirmation record (EKES) belonging to this inbound
delivery (EKES-VBELN) is also accurately updated at goods receipt.
How to solve the issue?
Use a confirmation control key with the GR assignment indicator set
and then create the inbound delivery with VL31N. If you want to be able
to create the inbound delivery with reference to a certain line item in
the PO, use transaction VL34.
If you still want to use transaction MIGO, there is the following
workaround:
- Create a purchase order without any confirmation control key
- Create a goods receipt (GR) in transaction MIGO with reference to this PO and post the GR to a non-HU-managed storage location
- Create a transfer posting with MIGO using movement type 311 to
transfer the goods from the non-HU-managed storage location to the
HU-managed storage location.
As the transfer posting is an additional step for the user, the whole
process could be automated using a partner storage location
(T001l-PARLG) for the GR which then triggers (through a modification)
the BAPI 'BAPI_GOODSMVT_CREATE' to create the transfer posting without
user interaction.
I hope to have satisfied you on the reason why it is now happening and
also I believe you can explain to business that it is a new behavior
necessary done from SAP side to avoid worse situations, we are aware of
potential dissatisfaction it might cause. SAP Support is always
available to clarify any issue.
Sorry for not having a more positive answer.
I hope it helps!
Leentje

Control key

Hi, all ,
I had certain queries which need to be clarified ,given below-
1)Apart from controlling operations, what r the other purpose of control key??
2) What is key figures and what is it function?
3)In calibration order, is it required to do TECO by IW32 or can it be done by t-code QA32 itself???
4)Through configuration can maintenance order screen be changed like notification ?
5)To get PM standard report like MCI7 etc, what is required to be done in configuration??
6) How many activity types can be assigned to maintenance work center??
7)Is work clearance management to be taken as separate package or in standard PM module itself it can be addressed??
I will be gratefull to all of you as these are of my some doubts.
thanks in advance
rgds
rajib
Please read the rules of engagement before posting:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement
- Only One Question Per Posting
You will get a better response if you stick to a specific functional area in each post. Your post covers a wide range of topics. I am going to lock this thread now.
Regards
Paul
(Moderator)
Edited by: Paul Meehan on Sep 17, 2008 4:07 PM

well I orignally had it set to keylistener problem is that it only works when what ever component the keylistener is set to so if the keylistener is on the frame then it works as long as the frame has focus yet when I have a text box or a button or some other component has focus then the control key stops listening? I am using JInternalFrame I tried to add keylistener to the rootpane so that it was global but that doesnt seem to work either

Cisco Wireless Control System need wireless Lan Controller ?

Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

Hi Joao,
The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
From this doc;
http://www.cisco.com/en/US/products/ps6305/index.html
Overview of WCS
The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
Detect and Locate Rogue Access Points
From this WCS doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Hope this helps!
Rob

Substitution for control key

Dear Gurus,
I am creating a project with 6 WBS elements. When I am creating internal activity then my control key is PS01.
My requiremenet is that only for 1st WBS of every project, my internal activity should be ZPS1 and for remaining it would be PS01. Is it possible through substitution ?
Please guide
Keshav

Hi,
SPRO >> PS >> Structures >> Operative Structures >> Work Breakdown Structure (WBS) >> Define Field Selection for Work Breakdown Structures >> Field Selection: WBS Element >> F2
Here define the 6 levels of WBS as per your requirement.
And in substitution, try to add control Key as fixed value for WBS level 1.
I am not sure it will work, but have a try
Regds,
CB

Control key activating wireless menu: T440s

Similar Messages

Maybe you are looking for