Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.

Hello...
It seems I got it fixed!! I had been trying the Fixit tool from
http://support.microsoft.com/kb/306759 while typing up there :))))
This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
Hope it helps someone.

Similar Messages

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the program

Hi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda.

I have a first generation ipod from 2005 however it's not a nano but a while ago the battery stopped taking a charge? any ideas

are the classic ipods under recall due to battery issues too?

janniemarie wrote:
are the classic ipods under recall due to battery issues too?
No, just 1G Nanos. If the battery is no longer taking a charge, it's a good indication that the battery is shot and in need of a replacement. You can opt to have Apple swap it out for a flat fee, send it to a third party company to do the same repair job, or buy a replacement battery from an online site and swap it out yourself.
B-rock

CR 10.2 not workin in Windows 2008 server 64bit

Hi everybody,
I've tried install CR10.2 on a Windows 2008 server 64bit but that doesn't work. After riding this interresting link : [wiki.sdn.sap.com|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] I see this version is not supported by W2008.
Then I decide to install CR2008. I update my web.config to the new version and finally I test the web app. But I've some errors like : [sdn.sap.com|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333733303334%7D.do] I can't retake all files, because they are so much and this is not the solution. All of our client are working with 10.2 and we can't update the application just for one client.
How can I do for make it work with CR10.2 ?
Thank's for your help.
PS : I'm not fluent in english

Hi,
Make sure that you are on CR 10.2 SP1
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe.
Recompile the application.
You would need runtime.
https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
Then deploy the application to your server.
Also what method you have been using to deploy the application?
What is the version of Visual Studio?
Thanks,
Saurabh

TS4062 Not all of my playlists and songs sync from my Mac to my iphone, any ideas?

Not all of my playlists and songs sync from my Mac to my iphone, any ideas?

Just got through flailing with the same problem within the hour. It turned out I had music purchased with an earlier Apple ID in iTunes. My solution was to authorize the computer in iTunes with the previous ID and then all music would sync. Might try that.

Windows 2008 Server License Key not working on VirtualBox

I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded. What can I do to have this server activate correctly under the VirtualBox?
Thanks,
Tom

Hi Tom,
Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
internet and with KMS method please confirm this vm can communicate with your KMS server.
The related KB:
Understanding MAK Activation
https://technet.microsoft.com/en-us/library/ff793435.aspx
Volume Activation in Disconnected Environments
https://technet.microsoft.com/en-us/library/dd981010.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I've been working on our church website and suddenly, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]

Crystal Reports 2011 not working in windows 2008 server CITRIX

Hi All,
We are using Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
We are using .net applicationton to run the reports.
The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
OK button is not responding. Cancel button too.
Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
Please feel free to ask if required any more details about my problem.
Regards,
Venkat.K

Ido's idea is excellent, only addition I'd like to make is the following:
You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Charging Macbook Pro while connected to iMac 27"

is it possible to charge Macbook Pro while connected to iMac 27" and what kind of connection or cable i should use ? firewire ? usb ? somthing similer to the 27" Cinema Display.
Kindest Regards

Yes. Use a Mini DisplayPort to Mini DisplayPort cable.
(120600)

HT201272 I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

If you downloaded it on your computer's iTunes then it should be in the Books part of your library, if you downloaded it on an iOS device then it should be in the Music app on it. If it's not there, and you don't have a copy of it on your backup of your library, then you will need to try contacting iTunes Support and see if they will grant you a re-download (audiobooks are currently a one-time only download from the store, which I believe is a requirement from audible.com who supply them) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

I have just updgraded to Mavericks and my bootcamp has vanished! I have an entire webite that has not been backed up in a while. All lost.... anybody got any ideas?

I have just updgraded to Mavericks and my bootcamp has vanished! I have an entire webite that has not been backed up in a while. All lost.... anybody got any ideas?

If you cant mount that partition in the disk utility, then try these steps in the terminal:
http://chrislee.kr/wp/2011/05/23/how-to-mount-bootcamp-drive/

TS4000 When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?

When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?

Sounds like we have a similar problem. Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine. Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black. I pushed the home button and it worked, went into my texts and all were there. However ever since then the time isn't right, so it can't keep time no matter what I do. The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died. The battery life display at that moment wasn't correct either. Took to Verizon, they couldn't help. Suggested a factory reset, which I did last night and still the same issues! One day I couldn't even text my husband on his iPhone. Just wouldn't work at all. Did everything suggest and still not good. Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days. Very strange, and all on the 5C. What did you do? Is it working now?

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?

My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?

I had the same problem with my phone, its a 3gs, out of no where my laptop stop recognizing it and wouldnt charge either, i got worried because i had all my pix and videos on my phone and didn't have a copy, so i started searching on the internet for an answer to my issue, bought extra usb cables, used different laptops and nothing worked .. Untill i took my cell phone apart and thought about replacing the (charge port assembly for apple Iphone 3gs) so ordered the part online and 3 days later got it and i just replaced it right now... and guess what/??? IT WORKED!!! YEAP.. NOW MY CELL IS CHARGING AND I JUST SYNC MY STUFF.. I HOPE THIS CAN SOLVE YOUR PROBLEM... AND ONLY COST ME 8 DLLS

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

Similar Messages

Maybe you are looking for