Control key purpose in Work Center

Hello Experts ,
As per my understanding control key work as a default value in Work center during the creation of work center.
My question what is the objective or purpose to define the control key in Work Center.
Actually i am in PS and i don't have much aware about this point why controlkey in WC.
Pl help me because i have to provide the justification to my client.
Many thanx in advance.
Regards
Amit Srivastava

Thanx for your reply ,
Now i explain the sitiuation , actually i have created the two work center but i have not given the control key input when my client has checked this he write me in mail where he has compared the this two newly created work center with previous existing work center where the control key input is exist .
Now at this point he is asking me in what scenario we have to given the control key input during the creation of work center meaning what is the purpose of defining the control key in WC and if we do not give then what will be the impact in future.
Pl help me in this so i could correctly explain the answer to client.
Regards ,
Amit Srivastava

Similar Messages

  • Control key no longer works after update.

    After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
    This is left control key though. Right still works?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • Control key doesn't work

    I had my late 2008 MacBook Pro's motherboard replaced by AppleCare after I messed up the USB ports, and when I got the computer back, the control key didn't work. I know it was working right before I took the computer in, and I think I noticed pretty quickly after I got the computer back that it didn't work. Does anyone know how that might have happened or how to fix it? (I've already checked to make sure I hadn't accidentally assigned control as a shortcut key for anything, and taken the key off to make sure there was nothing under it. The computer hasn't had any liquid damage.)

    I tried booting into another operating system, and the control key still doesn't work. So the problem appears to be hardware-related. Any ideas?

  • Procedure to change the standard value key of a work center

    Hi Gurus,
    What is the procedure to change the standard value key of a work center.
    Thanks in advance,
    Regards,
    PPQMUSER

    Hi,
    Just go to CR02 and change std value key, system will give you an information massage 'Standard value key : parameter XXXX after changed' as per the parameters used in new std value key.
    If you want to change the customization for allready used STD value key, then you need dealocate that key from workcenter, and then change the customization.
    Tara
    Edited by: tara  bhapkar on Feb 29, 2012 7:39 AM

  • Could not found any usage key in the work center WC001(Use T-CODE CR02)?

    my question:
    (1) I have created one Work Center WC001 and one Plant HJW1.
    (2) I have created one Routing with T-CODE CA01.
    (3) Then I use T-CODE CA02 to change this Routing.
    (4) When I enter the Head details screen,I click the Operations button to enter the Operations Overview screen.
    (5) In the Operations Overview screen list,I input the Work Center WC001 and the Plant HJW1 at the first line and press enter.Then the sap raise error message like below.
    (6) The question was: I could not found any usage key in the work center WC001(Use T-CODE CR02)! Could any one tell me the answer or give me some advice to resolve the problem?Thank you so much.
    error message:
    Work center WC001 plant HJW1 does not exist for task list type N
    Message no. CR084
    Diagnosis
    You want to allocate the work center WC001 to a task list of the type N . However this work center is not intended to be used in a task list of the type N.
    Procedure
    The usage of a work center in task lists is restricted via the usage key. You define this key in work center customizing and allocate to it those task list types in which a work center with this usage key can be used.
    Proceed as follows:
    Check the usage key for the work center WC001 in work center maintenance.
    If necessary change the usage key in the work center or change the allocation of task list types to the usage key in customizing or
    allocate to the task list a work center which is valid for use in a task list of the type N.

    Hi
    1) Check what task list usage key you entered for the work center in the basic data . If it is 009 then the work center can be used in all task list type.
    2) If you have defined and used any other usage key , ensure that  for this key , the routing type N is allowed in OP45.
    Regards,
    Ramasamy

  • What can I do to prevent the control key from not working in the future?

    Background:
    I bough an macbook pro about 1 year and 3 months ago and after 9 months of usage my control key stopped working for about an hour or two.This happened every time I turned on or awoke my mac from sleep (lid down).I sent it to an authorized apple service center and they replaced the keyboard.Everything was fine for about 4-5 months when the same thing happened again, ctrl key stopped working but this time not when turning on my mac but at random times and for random intervals.I sent it again to the service center but they told me that this time it won't be for free because my 1 year warranty has expired.I should mention that in European Union and Romania (the country where I am from and from which the mac was purchased) the law is that any electronics device sold has to come with at least 2 years of warranty.Apple seems to ingore this law.
    Anyway, after long conversations with apple uk on the phone they agreed to pay for the keyboard but not for the labor which was 70 eur ($100).It's not much but my 2 year warranty should have covered it.The sad part is that I have no guarantee that it's indeed a keyboard error and not something else, this might happen again in 4 months and I doubt this time apple would agree paying for the keyboard (which is 150eur) ($215).
    I should also mention that before calling apple uk I tried apple's romanian number (listed on their site) and it didn't work on the 3 phone networks that I've tried (2 fixed and one mobile) which led me to believe that apple support is in fact a big joke.
    Suffice to say that I will no longer purchase any apple devices or software, I regret purchasing mac os x lion just a week ago, when I will no longer use it because I intend to sell all my apple gear (timecapsule, iphone4, macbook pro) and buy stuff from companies that value their customers and respect their contracts.
    My questions are this:
    1) why does apple ignore EU and Romanian law?
    2) what can I do to prevent this from happening in the future
    3) can I request that my macbook be more thoroughly inspected? I suspect the keyboard is not the main problem and it will soon happen again as it happened two times already.
    4) can I do something for the repair labor charge to be waved? It is illegal in my country to ask for one in this scenario...

    Everyone reading your posts here is just another MacBook Pro user. We're all volunteers, not Apple employees. No one here can speak for Apple.
    In my personal opinion, buying Apple products in a country where Apple has no stores and no corporate presence is a risk that the buyer takes knowingly. I don't think it's a wise risk, and I don't recommend that anyone take it. A small percentage of the products sold anywhere are going to have problems, and it makes more sense to buy an inferior product that can at least be serviced locally than to buy a superior product that may have to be sent thousands of miles for repair if anything ever goes wrong with it.

  • Media controls keys does not work on iTunes?

    My keyboard has those "Media Controls Keys" on it (just like Play or Stop etc.) but it won't work with iTunes, unless iTunes is on the front of all windows. I used to use Windows Media Player and it can work with the Media Controls Keys even the player is minimised. Are there any ways simply changing settings with iTunes and solve the problem?

    Hello,
    I don't have a W541 myself, but here are a few things to check, in no particular order:
    Have you checked with your IT department?  Maybe they set a poilicy to disable the card reader.
    Is the card reader correctly enabled in the UEFI firmware?
    Have you run ThinkVantage System Update and Microsoft Update to confirm all of the various Lenovo and Microsoft updates are installed?
    Do you still have the OS image the device originally shipped with?  If so, does the card reader work under that?
    Regards,
    Aryeh Goretsky
     

  • Apple AL Bluetooth Keyboard - Tab, Caps Lock, Function and Control keys just stopped working

    Hi All -
    All of a sudden I get on my baby, 27" iMac OSX 10.6 and the some keys on the bluetooth keyboard do not work. Specifially the Tab, Caps Lock, Function and Control keys. I'm fine with the caps lock gone (why is it there?) but the others are useful.
    I've searched all over for a solution but I haven't found one. Tried to upgrade the firmware which is fine, reset the PRAM done, checked the speech per apple support nadda.
    Please help.
    Thanks
    -M

    Hi
    Go to System preferances > Universal Access > Mouse or Mousie and trackpad > and turn your Mouse keys off.
    Then disconnect and reconnect your keyboard.
    Note that you don't open your mouse under hardware in System Preferances, this is for a whole different group of settings
    Hope This helps

  • Control key combination stopped working

    I use [control]- and [control]+ on the number pad to zoom the text in and out.
    For some reason, [control]+ on the number pad no longer works. It does, however, work using the number keys at the top of the keyboard.
    I have tried starting Firefox with no extensions loaded ... no joy. I have tried creating a new profile under my user account ... no joy. I have system administrator privileges.
    When I launch Firefox using the Full Administrator's account and password, all the keys work.
    I'm using Firefox 22.0 on top of Windows XP Professional.

    This is driving me nuts.
    The key combination does not work in either Firefox or Adobe Reader when I'm logged in as myself (with Admin privileges). When I login as Administrator, I do not have the problem.
    I had to reformat my computer and reinstall all software a couple of days ago due to another problem. Interestingly, until yesterday afternoon, the key combos worked in both my account and the Administrator account. Sometime yesterday afternoon while reinstalling all the software, I lost the key combo on only my account again.
    I checked the registry on both my account and the Administrator account ... no difference ... no joy.
    If this happens in both Firefox and Adobe Reader, it's gotta be because of one of the pieces of software that I installed yesterday afternoon ... right???
    [quote]
    Can you think of any external software that might have captured that combination globally for some purpose (e.g., screen recorder software hotkey to start a new capture)?
    [/quote]
    Oh, I don't use any screen captures or hotkeys. It must be something that I'm not aware of.
    Thanks.

  • My mission control key does not work with the new Mac update

    The key on the keyboard doesnt work, neither does the button on my dock.  Any help?
    P.S. is anyone else having as much trouble as I am with the new update?

    The pre-2006 Mac models this forum covers cannot run a Mac OS high enough to have Mission Control. If you can identify your Mac to us we can get you moved to a more active forum.

  • What are the control functions of Suitability and setup type key in work center?

    Hi all,
    Can any1 plz tell me what is suitability and setup type key in workcenter default values tab?
    what are the functions controlled by these keys?

    Hello,
    Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
    Almost in all the PP we define same Control key to the work center as well in the routing.
    For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
    No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
    Regards,
    Piyush

  • Control Key in Work Center and Routing

    Hi Gurus,
    Can anybody tell me what is the difference between Control Key we are providing in second tab of work center and the control key we input in routing.
    can i use same control keys at both the places.
    Regards,
    Anand.

    Hello,
    Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
    Almost in all the PP we define same Control key to the work center as well in the routing.
    For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
    No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
    Regards,
    Piyush

  • How to create operations without entering a performing work center

    How to create operations without entering a performing work center ? which control key should i select ?

    Hi
    QM01 is control key used for all the task lists of Quality.
    there is no such a configuration associated with control key &  usage of work center.
    Work center is used for the activity capturing perpose & control key is to control operations.
    I hope this is clear.
    Entering a work center is totally depends on the scenario & not control key.
    Regards
    Sujit

  • Production sheduling profile VS control key

    I have few quieries regarding PP.
    1.How Auto goods receipt is triggered? If we set in Prod.schd. file then why we need control key for this AGR? what is the difference on both cases?
    2.what is the rough-cut planning? why we need this in SOP?
    3.what is the significance of basic dates and lead time scheduling? what is the difference between those two?
    Thanx in advance
    NSR

    Hi,
    Auto good receipt can be triggered by the control key maintained inthe work center. Please check the individual control keys for details . In this you have to use the control key in which auto receipt receipt is checked.
    Rough cut planning is  the planning which is done preliminarily. After it is finalised this has to be transfered to demand mangement (PIR) . Once it is moved to PIR when MRP run system willl take the requirements and calculate the material requirements.
    Lead time scheduling is scheduling which is done for the materila after taking into consideration of the lead time, including individual operation times.
    Regards
    Ranga

  • Control key (^) combined shortcuts does not work on mac book pro

    All shortcut combinations with the control key (^) do not work. I´m using Mac Book Pro 13 (late 2013) with Os X Mavericks 10.9.4

    The Logic Board is the Main system board. In the Windows world better known as the Motherboard. Except with Apple Mac computers the CPU and the GPU are Soldered to the logic board and if it is a Retina screen model the RAM is also Soldered to it.
    So replacing the Logic board is like replacing the compete system and costs accordingly.
    But there isn't much else you can do if you can't get that switch unstuck. Or just go without sound from the built in speakers. They aren't that good anyway.

Maybe you are looking for