Control Key showing different

Dear Gurus,
I have changed the control key in Routing as well workcentre , valid from also in back date.After that when I am creating order for that material it is taking the old Control key.what the reason why it is taking old one please advice me.
Aravind

Hi Arabind,
Are you using any change number for changing the routing ? If so date of validity can have impact.
Try as given below:
Go to CR02 Change work center -Default values tab - For the control key tick the referenced indicator
Go to Change Routing -Delete the operation pertaining to that workcenter -Save and again maintain the operation with workcenter. Control key will automatically get copied from work center dafault values.
Now create new order and check.
Thanks & Regards,
Ramagiri

Similar Messages

Keyboard keys showing different symbol to what I press

My keyboard isn't working properly, when I press the letter 'o' it shows the symbols 'oty' and when I press 'N' it brings up a new page of whatever I'm on. Also when I press 'L' it shows the copyright symbol followed by a dot and what looks the the letter 'L' floating on its side. Can someone please help with this? I'm just so confused and been trying all sorts of things for over two hours now.

Open system preferences, Universal Access, Keyboard tab and see if sticky Keys is on.
If it is, turn it off.
If this is not the source of the problem, try using a other keyboard to see if the problem is still present.
Also have a look in the Language & Text preference panel and check each tab to see if there is something wrong there. For example, is the selected language English? Is the Input source the correct one for you?

Control key locks

i have an hp g-71167dx notebook. my control key show as being locked and i have to turn off my computer to clear it. pc is only 6 months old. are there any solutions ?

Hey edlibra and da9132,
There could be a couple of different causes/solutions for this issue. Here are some suggestions.
First try pressing both the Left and Right Ctrl keys down at the same time. See if that resolves the issue.
By default in Windows Ease of Access Center (Start > Type "ease" > Click Ease of Access Center > Click Make the keyboard easier to use > Click Set up Sticky Keys), Lock modifier keys when pressed twice in a row, is checked. Just uncheck that box and hopefully you won't run into that problem anymore. Modifier keys include Ctrl, Shift, and Alt.
You could also see if there is a BIOS update for your particular notebooks. I'll need both of your product numbers and whether you're using Windows 7 or Windows 8. Here are the steps to find your product number. Once I have your product number and version of Windows, I can provide you both with direct links to your latest BIOS driver.
To find the current BIOS version, follow the steps below (taken from here):
Windows 8 : From the Start screen, type msinfo32 . Click msinfo32 from the list of results.
Windows 7 and Vista : Click Start , enter msinfo32 in the search field, and then select msinfo32.exe from the list of results.
Windows XP : Click Start , select Run , enter msinfo32.exe in the Open field, and then click OK .
In the System Information window under the System Summary category, look for the BIOS Version/Date entry. This is your current BIOS version.
Figure 1: BIOS Version/Date
Write down the BIOS version and post it in your reply.
Please let me know if you have any questions or if these suggestions helped (this could help other users having the same issue). I'll keep an eye out for your reply.

Have to hold down mission control keys, when did this change?

I have my mission control keys (show windows in app, show all windows, and show desktop) set to use the F10, F9, and F11 keys without function keys.
Recently (as in five minutes ago) I noticed that the keys are no longer behaving like they used to. I now have to hold those keys to use any of those functions, basically making them useless because now my hand is occupied with that instead of using the trackpad.
Is there some update that happened that caused this change or is it just a product of some setting getting changed? I never noticed a setting for this in the System Preferences.
Computer: late 2008 unibody Macbook, 2.5 GHz, 4 GB RAM, running Yosemite 10.10.2.

Actually just solved my own problem.
Used killall Dock according to instructions here: https://discussions.apple.com/thread/3831445
and everything is now working as normal again.

SAP PM-CONTROL KEY

Dear All,
Is it necessary to assign different control keys to different maintenance order?.basically why it is to be used.?
Thanks
Vishal

Hi,
Yes it is necessary to assign. We assign it to planning plant and in Maintenance or service orders, under PM&CS menu> Maintenance and service orders>Functions and settings for order types.,The Control Key determines which business transactions should be executed for the object i.e. task list or order for scheduling or costing.
While we create a service or maintenance order the control key gets displayed automatically through assignment done.
Regard
DSR

Control key is showing Desktop - Help

Long story short - I have somehow mapped my 'Control' key to show my Desktop on my Macbook Air. I can't remember how I did this and was wondering if anyone had any suggestions.
I have already tried System Preferences>Keyboard>Modifier Keys and Control says Control.
I am running OS X 10.9.2.
Any help is appreciated.

Did you ever find a solution to this? It is happening on my keyboard with left fn, control, and option keys, driving me crazy and preventing work on photoshop involving the use of these keys!!
I have checked all the suggestions on this forum with no results.

PP-PI - Control key

Hi guys,
I have an issue with capacity requirements generated by process orders. I have been experimenting with the control keys to show the appropriate behaviour, but this does not seem to be the case. The following happens
When I put the same control key (with detailed capacity requirements ticked on) in both the phase and the operation then the graphical planning board (CM29) behaves as expected, but when I check the capacity evaluation (CM50) then the capacity is consumed twice! So this scenario does not work.
When I put a different control key in the phase. So the control key in the operation has 'det. cap. req' ticked on and the control key in the phase does not, then the graphical planning board behaves appropriately, but again the capacity evaluation does not work correctly, in this case no capacity consumption is registered in CM50.
When I do the reverse of above, I put a control key in the phase with 'det. cap. req' ticked on, and a control key in the operation where this box is tocked off, then the graphical planning board does not work as expected, it won't let me schedule my order. The capacity evaluation (CM50) works appropriately.
So my analyses is telling me, I cannot use both functionality. Does anyone perhaps have some help for me to fix this problem?
I will reward points for useful comments,
kind regards,
Mark

I cheked in my system,
I too faced the same issue, In my case I am using planning table for the purpose and I am happy with that.
If you want the setting required for planning table I can tell you.
otherwise if you cannot go for planning table, let me know I will try my best to get the answer

Bug: Control key misbehavior

Ever since I upgraded to MacOS 10.6.4, Aperture (both 2 and 3) has been confusing the Set Rating commands with the Filter by Rating commands. I'm using Aperture's default key equivalents, so:
1 should set the rating of an image to 1
control-1 should show all images with rating 1 or higher
and so on for 2-5.
What's happening instead is that control-1 will sometimes behave correctly (maybe 70% of the time) and the other 30% of the time it will change the rating of the selected photo to 1 instead of filtering. The same happens for control-2 through 5 and control-~ (which will sometimes show the loupe), as though Aperture forgot that the control key was held down.
This happens with two different keyboards, but only in Aperture. I've never had this happen in any other application or before upgrading to the latest MacOS X. Is this a known bug?

A little more data:
- I was able to reproduce the same problem on a fresh stock install onto an empty disk of MacOS 10.6.4 and Aperture 3 from the original DVDs.
- If I assign different commands (or no commands) to, say, control-2, 2 on the main keyboard, and 2 on the numeric keypad, then I get the following behaviors:
When pressing 2 on the main keyboard, sometimes I'll get the command associated with that key (or a beep if none), and sometimes I'll get the command associated with 2 on the numeric keypad.
When pressing control-2 on the main keyboard, sometimes I'll get the command associated with control-2 (or a beep if none), sometimes I'll get the command associated with 2 on the main keyboard, and sometimes I'll get the command associated with 2 on the numeric keypad.

Control keys stop working after the last tigervnc upgrade

I've upgrade to the last tigervnc package (tigervnc-1.3.0-1-x86_64.pkg.tar.xz) and control keys like CTRL+C, CTRL+V stop working.
Is someone facing the same problem?

Yes, I have the same problem. It seems to be the viewer as I can connect to the server with
a different vncviewer (tightvnc) and all keyboard control keys work. I ran xev and pressing
CTRL-T and it shows:
KeyPress event, serial 34, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693323, (-452,-13), root:(362,803),
state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693402, (-452,-13), root:(362,803),
state 0x4, keycode 255 (keysym 0x1000014, (no name)), same_screen YES,
XLookupString gives 1 bytes: (14) ""
XmbLookupString gives 1 bytes: (14) ""
XFilterEvent returns: False
KeyRelease event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693530, (-452,-13), root:(362,803),
state 0x4, keycode 255 (keysym 0x1000014, (no name)), same_screen YES,
XLookupString gives 1 bytes: (14) ""
XFilterEvent returns: False
KeyRelease event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272694875, (-452,-13), root:(362,803),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
The
(keysym 0x1000014, (no name))
shows up on a normal xserver as
(keysym 0x74, t)
I'm not sure how to fix it though.

MB5B shows different opening quantity when we select diffferent Stock Type

Dear All,
I am trying to run report MB5B - Stock on posting date with 2 different Stock Types:
- Storage Loc/Batch Stock
- Valuated Stock
But the report shows different opening quantity,total receipt, total issue, but closing quantity is ok.
Could you pls tell me the reason?
Thanks
Cao Huy

Hi,
MB5B transaction is used to display the stock on posting date
It is not possible to view at the same time both Valuated stock and special stock. This is radio button input control,so any one of the stock type only possible to display the material document.
This report display the material and plant vise material document number and total stock and total issue etc for the example,
Plant            1256 test plant
Material         TH1
Description    steel rod
Stock on 01/01/2010                   0.000 PC
Total Receipts                      29.500 PC
Total Issues                         3.000- PC
Stock on 12/31/9999                   26.500 PC
SLoc MvT S Mat. Doc. Item Pstng Date          Quantity BUn
TEST 101   5000003029    1 12/23/2009            1.000 PC
TEST 101   5000003039    1 12/31/2009            1.000 PC
Regards,
thiru

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command.

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.

If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection.

Purchase order does not contain a confirmation control key

Hi expert
I have not set any confirmation control key in Purchasare order, still at the Migo, system is showing error at depot.
I have check the same thing with manufacturing plant, system dont show me any error.
Regard
Nabil

Hi,
I f the confirmation control key is maintained in PUR.info record is automatically will fetch into PO though you have not selected manually in PO. The CC maintained in vendor master or PIR can copy into PO. In your case please see whether inbound delivery is needed to perform GR? CC implies many types of confirmations like order acknowledgement, advanced shipping notification or confirmation of delivery dates. Please see specifically to the error. Try to know the type confirmation system needs to post GR. Thanking you.

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Control key combinations in Keyboard Shortcuts

I want to use the Control key plus letters, such as Ctrl-H, for shortcuts within Keyboard Shortcuts. I appreciate that such combinations are normally used by EMACS but I fail to understand what's happening in the Keyboard Shortcuts section of my Keyboard panel in System Prferences. It allows me to enter the Control key plus letter as my required shortcut but the shortcut never works. Any other shortcut, using other modifiers, even in combination with the Control key works fine. Now I have other utilities, such as FastScripts and Spark that allow me to use such combinations, so why can't they be used in Keyboard Shortcuts?
If anyone else has this problem and knows of an answer it would be much appreciated!

Well, the Keyboard Shortcuts panel doesn’t show the warning triangle as shown for other conflicts. Shouldn't the panel reject such key combinations if they're not available? Instead it shows them as being OK. I would have thought it reasonable to use such key combinations in non-EMACS applications anyway. Also, why is it that other utilities make it possible to use them? Most odd. I'll just have to use other methods I suppose!

Control Key showing different

Similar Messages

Maybe you are looking for